mandrinadoras y centros de mecanizado usadas para la venta (3,209)

x-travel:560 mmy-travel:450 mmz-travel:450 mmtable surface area:760 x 410 mmturning speed range:8.000 U/mintotal power requirement:20 kWVertical Processing Centre

Auction-ID: A7-46460-435

x-travel:600 mmy-travel:770 mmz-travel:675 mmtotal power requirement:47 kWweight of the machine ca.:13 tTool bore:HSK-A63 numbers of tools in magazin:40 including additional tool magazine ZM 182 1 spindle , 5 axesTexte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht.Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt.Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt.Copyright © 2005-2026, Josef Weber. All rights reserved.

Auction-ID: A7-46460-507

Auction-ID: A7-46460-418

Auction-ID: A7-46460-487

Auction-ID: A7-46460-504

Auction-ID: A7-46460-471

Auction-ID: A7-46460-425

Auction-ID: A7-46460-410

Auction-ID: A1-45666-11

Sistema de refrigerante de la perilla y transportador de astillas, posiciones del cambiador de herramientas: 240, giro rápido (X/Y/Z): 60 m/min., longitud máxima de la herramienta: 350 mm, diámetro máximo de la herramienta: 160 mm, peso máximo de la herramienta: 12 kg, diámetro máximo de la pieza: 720 mm, altura máxima de la pieza: 1000 mm Auction-ID: A7-46300-10

Puestos de cambiador de herramientas: 51 Auction-ID: A7-46300-80

Sistema de refrigeración de la perilla y transportador de astillas, posiciones del cambiador de herramientas: 408, giro rápido (X/Y/Z): 90 m/min., longitud máxima de la herramienta: 350 mm, diámetro máximo de la herramienta: 160 mm, peso máximo de la herramienta: 12 kg, diámetro máximo de la pieza de trabajo: 720 mm, altura máxima de la pieza: 850 mm Auction-ID: A7-46300-1

Auction-ID: A1-45666-18

Auction-ID: A7-46300-13

X-Viaje: 1016 mmY Viaje: 610 mmZ - Viaje: 760 mm Consumo total de potencia: ? kWpeso de la máquina aprox: 7,5 tdimensiones de la máquina aprox: 3 x 2,5 x 3,2 m Los datos de este anuncio fueron creados con ModulMWS, la solución de software de LogoTech oHG.

X-Viaje: 1016 mmY Viaje: 610 mmZ - Viaje: 760 mm Consumo total de potencia: ? kWpeso de la máquina aprox.: 7,5 tDimensiones de la máquina aprox.: 4 x 3 x 3,2 m. Superficie de sujeción de la tabla 1.270 x 590 mm. Carga de la tabla 1.350 kg tasa de alimentación 15.000 mm/min recorrido rápido 20 m/min Portaherramientas ISO 4024 cambio de posición Transportador de chip IKZ Reparación para IR - sonda de medición ( Renishaw )Control SELCA Los datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 595 €: 12 mm: 19 mm Weldon : 0.1 kW: 175 mm: 250 mm: 312 mm: 10 kg: 12 mm: 36 mm: 51 mm: 70 mm: 350 U/minThe PRO-36 makes holes up to 36 mm in diameter by using annular cutters. The machine can also drill holes up to 12 mm in diameterby means of twist drill bits with Weldon shank 19mm (3/4’’).Compact design and excellent ratio weight/power make this mag drill a very popular choice for customers.Features &, benefits:• Dual bars guide system ensures extraordinary stiffnessand adjustment free operation• Compact size and ultra-lightweight - ideal for site work• Rugged one piece slide and gear box for extra stability• Purpose designed motor with heavy duty gear box• Maintenance-friendly design makes it easy to use• Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials• Magnetic Power Adhesion Con ...

Auction-ID: A7-46300-40

: gebraucht : 3985 : prompt, Zwischenverkauf v : Schweden : 1800 €: 1 : 25 mm: MK 3 : 235 mm: 100 - 2080 (8) U/min: 750 mm: 900 mm: 1550 mm: 250 kgQuill travel by handwheelHeight adjustable and swiveling drilling headCross table with manual feed in X and Y axesDoes not comply with the German UVV and Austrian AMVOno operating manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-45666-24

Estado: sin revisar El artículo se vende tal cual El peso puede ser GGBFS. Desvíaos. La máquina debe ser desmontada por el comprador y transportada fuera del área del pasillo. No se puede garantizar que haya una carretilla elevadora en el lugar. Auction-ID: A1-46354-59

Auction-ID: A7-46453-10

Auction-ID: A7-46300-75

sin palets Auction-ID: A7-46300-50

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 2595 €: 12 mm: 19 mm Weldon : 0.4 kW: 361 mm: 238 mm: 352 mm: 145 kg: 12 mm: 36 mm: 50 mm: 70 mm: 260 U/min: 6 mmThis special design battery-operated drilling machine equipped with permanent magnetic base is dedicated to operatein remote areas, where no power supply is available.The base includes very strong neodymium magnets and does not require any electricity to operate.PRO-36 PM Battery is equipped with LED monitoring system that generates signals in green and red colors to indicatethe current status of the drill and provide safety information.The drill can be used with convex (min diameter - 80 mm) and concave (min diameter 1000 mm) materials.Up to 47 holes fi 20 mm in 10 mm thick plate can be made when PRO-36 PM Battery is equipped with CAS LiHD 10.0 Ahbattery pack.Features and benefits:• LED interface flashes green wheninadequate adh ...

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 1055 €: 12 mm: 19 mm Weldon : 1.1 kW: 400 mm: 126 mm: 185 mm: 10 kg: 12 mm: 40 mm: 40 mm: 45 mm: 370 U/min: 6 mmPRO-40 AD is a low profile mag drill, that fits in the tightest of spots.Perfect solution for any applications in confined spaces, wheretypical mag drills are too large.Its powerful motor enables drilling of holes up to 40 mm (1-9/16”) in diameter and up to 40 mm (1-9/16”) deep.An innovativeultra-strong magnetic base with high performance on air gaps makes it possible to work even on painted, rusted or thin surfaces.Magnetic Power Adhesion Control (MPAC) protects both the drill and the operator from working on too thin or inadequate surfaces,preventing the motor from engaging if the adhesive force is dangerously low.PRO-40 AD accepts both TCT and HSS cutters as well as twist drill drills with 19,05 mm (3/4”) Weldon shank.Featu ...

: neu : 2025 : .00775 : prompt, Zwischenverkauf v : 949.81 €: 1 : 150 mm: 40 mm: 33 kg Vís [felix] 2.0 150 Mandril de perforación de acción rápida B18 3-16 mm (precisión 0,17 mm) Mandril cónico B18/MK IVRuíto manguito Mk iii/mk IIRugua de aprendizaje MK iii/mk ITlos datos para este anuncio fueron creados con ModulMWS, la solución de software de LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 11530 €: 221.38 €: 40 mm: MK 4 : 300 mm: 75 - 150 - 235 - 325 - 47 U/min: 1.3 kW: Stahl: M 30, Guss: M 32 : 600 mm: 640 mm: 2020 mm: 305 kg: 0,1 — 0,2 — 0,3 mm/U: 160 mm: 125 mm: 420 x 400 mmERLO (MADE IN SPAIN)FOR DEMANDING WORKSHOP USEgeardrive machine2 aut. feedsleft-right drillingdrill guardCE normsuser manual in GERMANOPTIONS (PRICES ON REQUEST): lighting equipment coolant equipment and machine base with T-slots Reverse for TappingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.