mandrinadoras y centros de mecanizado usadas para la venta (3,253)

Multi-spindle head, multi-spindle drill head, drilling gear-Multispindle head-Spindles: 4-Socket: Ø 20 x 30 mm-Dimensions: Ø 120/165 mm-Weight: 2.2 kg

Morse taper sleeve, tool holder, morse taper, morse cone, taper sleeve, adapter -Adapter -Intake: MK6 -Recording tool: MK3 -Number: 3x recordings available -Price per piece -Weight: 4kg/pcs

Multi-spindle head, multi-spindle drill head, drilling gear-Multispindle head-Spindles: 7-Socket: Ø 20 x 30 mm-Number: 2x built-in drill-Dimensions: Ø 120/290 mm-Weight: 2.2 kg

Bench drill, stand drill, pillar drill, column drill -Spindle holder drill chuck: 4 mm -Clamping table: O 125 mm - Projection: 105 mm -Speeds: 1400 rpm -Pillars diameter: 41 mm -Spindle stroke: 55 mm -Motor power: 75W -Dimensions: 290/150/H530 mm -Weight: 13.4kg

Drill press, drill press, stand drill, pillar drill-with: clamping table and fixed machine vice-Table size: 275 x 325 mm-spindle taper: MK3-Projection: 300 mm-Speeds: 90-1450 rpm-Columns: Ø 120 mm-Spindle stroke: 125 mm-Translation via: gears-Number: 1x drilling machines available-Price: per piece-Dimensions: 770/660/H2060 mm-Weight: 284 kg

bore capacity in steel (diameter): 50 mmbore capacity in cast iron (diameter): 60 mmthreading cutting capacity:: M36 throat: 400 mmbore stroke: 230 mmspindle taper: MK 4 feed range - spindle: 0,1-0,2-0,3-0,4-0,5-0,6 mm/Uspindle turning speed range: 54 - 1032 U/mintransmission ratio: 12 Stufencolumn diameter: 200 mmtable surface area: 550 x 550 mmtotal power requirement: 3,0 kWweight of the machine ca.: 0,72 tdimensions of the machine ca.: 0,6 x 1,2 x 2,6 mEquipment:- Gears made of hardened and ground steel- Front speed selector lever- Gear lubrication by automatic oil pump- Integrated coolant device- Machine lamp- Rotatable and tiltable table- Automatic feed with electromagnetic clutch- Handwheel for manual fine feed- automatic tool ejector- Integrated electrical controls in the drill head- Pushbutton for EMERGENCY STOP- Switch for right / left rotation- Height-adjustable chip protection ...

bore capacity in steel (diameter): 60 mmbore capacity in cast iron (diameter): 70 mmthreading cutting capacity:: M50 throat: 420 mmbore stroke: 260 mmspindle taper: MK 5 feed range - spindle: 0,1-0,2-0,3-0,4-0,5-0,6 mm/Uspindle turning speed range: 64 - 1210 U/mintransmission ratio: 12 Stufencolumn diameter: 220 mmtable surface area: 600 x 600 mmtotal power requirement: 4 kWweight of the machine ca.: 0,82 tdimensions of the machine ca.: 0,7 x 1,2 x 2,7 mEquipment:- Gears made of hardened and ground steel- Front speed selector lever- Gear lubrication by automatic oil pump- Integrated coolant device- Machine lamp- Rotatable and tiltable table- Automatic feed with electromagnetic clutch- Handwheel for manual fine feed- automatic tool ejector- Integrated electrical controls in the drill head- Pushbutton for EMERGENCY STOP- Switch for right / left rotation- Height-adjustable chip protection h ...

voltaje: 50 Vfrecuencia: 50 Hzamperio: 3,7 A: 21882 velocidades:: 3

: JA Avance: 80 - 800 m/min: 1848 Peso de la máquina aprox.: 2,2 t

x-travel: 1500 mmy-travel: 1000 mmz-travel: 700 mmtable:: 1500 x 1000 mmcontrol: FIDIA weight of the machine ca.: 11 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drill, drill press, pillar drill, pillar drill -Table size: 275 x 215 mm -Spindle mount: MK3 -Projection: 280 mm -Speeds: 200-1450 rpm -Columns: Ø 120 mm -Spindle stroke: 100 mm -Translation via: Gears -Number: 1x drilling machines available -Price per piece -Dimensions: 360/600/H1945 mm -Weight: 230kg

Control unit, control panel, control panel, control unit, keyboard, screen, control-Two-hand control panel with: foot switch-Dimensions: 460/370/H920 mm-Weight: 18 kg

bore capacity in steel (diameter): 40 mmthroat: 300 mmbore stroke: 120 mmspindle taper MT: 4 MKtable:: 500 x 460 mmcolumn diameter: 115 mmturning speeds: 75- 3200 U/minfeeds: 0,1 - 0,18 - 0,26 mm/Utotal power requirement: 1,5 kWweight of the machine ca.: 350 kgrange L-W-H: 2,2 x 0,8 x 0,7 mmColumn drilling machine with:automatic feedThread cutting function.Digital depth displayCoolant system2 stage motorSpindle protectionSwivel tablePivoting drill headLED lightingPackaging dimensions:730x760x188mmWeight 340kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 20 mmthroat: 180 mmbore stroke: 82 mmturning speeds: 220 - 2840 U/min: 290 x 290 mmtotal power requirement: 0,55/0,75 kW / Voltweight of the machine ca.: 54 Kgdimensions: 820 x 500 x 290 mmCE-tested spindle hood.Keyless chuck (1 to 16 mm)Tilting work table.Depth stop.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg

Drill press, bench drill, column drill, pillar drill-Manufacturer: Ibarmia, column drilling machine type 40 TF / C-Motor: Siemens 1.1 kW-Speeds: 104 - 1450 rpm, right-left rotation-Table size: 360 x 300 mm, travel 600 mm-Spindle mount: MK3-Spindle stroke: 150 mm-Feed: automatic-Projection: 300 mm-Pillar Ø: 125 mm-Coolant device-Dimensions: 480/680 / H2220 mm-Weight: 358 kg

bore capacity in steel (diameter): 30 mmthroat: 260 mmbore stroke: 135 mmspindle taper MT: 3 MKtable:: 420 x 350 mmcolumn diameter: 135 mmturning speeds: 125 - 3030 U/minfeeds: 0,1 - 0,2 - 0,3 mm/Utotal power requirement: 1,1 kWweight of the machine ca.: 380 kg.range L-W-H: 0,9 x 0,55 x 2,2 mmHigh-quality drill press with a high speed range for theindustrial use.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Setup station, pallet changing system, pallet changer, pallet storage, tool changer chain, chain magazine, tool changing system, tool magazine-Setup station with: Garant ZERO CLAMP G-11886-Manufacturer no.: 101545300002672 - 21063 1721559-Dimensions: 400/400/H810 mm-Weight: 232 kg

Axis control, electronic handwheel, control unit-The electronic handwheel was removed from a CNC machining center make: Hitachi Seiki type: HC400. Other spare parts available.-electronic handwheel for Hitachi Seiki type: HC400-Dimensions: 170/120/H80 mm-Weight: 0.6 kg

bore capacity in steel (diameter): 3 - 16 mm: max. 1500 mmweight: 300 kgPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Length stop, length stop, saw stop, material stop, motorized length stop, controlled length stop-Length stop: for various processing options-Max. Stop length: 2970 mm-Individual components: see photos-Dimensions: 3530/700 / H1170 mm-Weight: 346 kg

Control unit, control panel, control panel, control unit, keyboard, screen, control-Foot switch comes from a Trumpf punch type Sunimat 400-Dimensions: 280/140/H150 mm-Weight: 4.4 kg

Spindle for plate boring mill, table boring mill, boring mill, milling machine, quill, boring head, Replacement spindle-SK50 holder for: screwing onto the faceplate-Adjustment: SK50-Dimensions: 220/220/H160 mm-Weight: 20 kg

Radial drilling machine, drilling machine, boom drilling machine, universal drilling machine, milling machine-Projection: 645 mm-Taper mount: MK3-Speeds: 95 - 1050 rpm-Columns: Ø 190 mm-Spindle stroke: 195 mm-automatic feed: 0.05/0.10/0.20 mm/rev-Clamping table: 735 x 520 mm-Dimensions: 1350/705/H2170 mm-Weight: 1100 kg

Drill, pillar drill, column drill, column drilling machine -Manufacturer: Super Condor, pillar drill type 20 22 -Engine: unfortunately no type designation -Speed: Gearbox V-belt 8-speed -Table size: 255 x 255 mm, travel 670 mm -Spindle holder: MK2 -Spindle stroke: 120 mm -Feed device: yes -Projection: 205 mm -Column Ø: 100 mm -Dimensions: 830/380/H1730mm -Weight: 205 kg with pallet

Control unit, control panel, control panel, control unit, keyboard, screen, control-Control panel with: EMERGENCY STOP push button-1 switch with: key-up to: 6 connections-Dimensions: 245/200/H965 mm-Weight: 12 kg

control: Heidenhain 355 tool adaptor: SK50 weight of the machine ca.: 8 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control unit, control panel, control panel, control unit, keyboard, screen, control-Siemens: Profinet connection box PN Plus-On the control panel: with additional panel holder/emergency stop button-Price: per piece-Number: 4 pieces-Dimensions: 420/350/H1220 mm-Weight: 30 kg

Drilling machine, pillar drilling machine, column drilling machine, tapping machine, thread cutting machine-Manufacturer: Möller, pillar drilling machine type MOE 1132-Engine: Loher 1.5 kW-Speed: 110 - 1450 rpm, continuously variable right-left rotation-Feed: 0.1/0.2/0.3 mm/rev.-Table size: Ø 370 mm, travel 735 mm-Spindle holder: MK3-Spindle stroke: 170 mm-Projection: 280 mm-Column Ø: 130 mm-Dimensions: 940/650/H1830mm-Weight: 398 kg with pallet

Control unit, control panel, control panel, control unit, keyboard, screen, control, two-hand control panel-Manufacturer: Unseld, two-hand control panel from Dorstener APE80-3050 press brake-Type: SEP03.0.L1/stand STP 01.4.1-Accessories: including foot switch-Dimensions: Ø 500 x 1000 mm-Weight: 23 kg