mandrinadoras y centros de mecanizado usadas para la venta (3,251)

table length: 2000 mmtable width: 2000 mmtable load: 25 ttable rotating: 360 °Control: total power requirement: 4 kWweight of the machine ca.: 8,2 tdimensions of the machine ca.: 3 x 2,9 x 0,9 mBoring mill table Skoda E25A- Boring mill table Skoda E25A- Dead weight: 8,2t- Max. Clamping weight. 25t- First commissioning: 1996- Decommissioned and stored since 2014- All axes are electrically controllable and ready for operation- 360° rotary drilling table ready for operation- Dimensions: see data sheet- Heidenhain rotation measuring system with digital display ready for operation- Heidenhain linear measuring system with digital display ready for operation- Boring mill table fully functionalThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GeneralCNC Turning Centre; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways620 mmTransverse stroke260 mmLongitudinal stroke795 mmClamping chuck diameter max.315 mmWork spindle (left)Spindle bore91 mmSpindle diametre on front bearing140 mmMain drive 1Drive power (100% DC)22 kWSpeed range- 4000 rpmTorque (100% DC)410 NmMax. torque (40% DC)525 NmAccuracy at point stopping0,001 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (100% DC)10 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,03 x 2,2 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with Siemens control)Chuck rinsing device, outsidechuck rinsing device, outside (main spindle)Main s ...

GeneralTwo spindle Swiss turning automatic lathe; Control: Fanuc 310is Working areaBar diameter max.42 mmChanging kit from steady to sliding headstockChanging kit from steady to sliding headstock including application bush type Dunner B236 and bush-spindle syncronismDrive for support for back workingDrive for support for back working operation (slide 2) power 0.55 KWAxial drilling unit for back work.oper.Axial drilling unit for support for back working operation (slide 2) with 2 rot.spindles, junction for collet ESX/ER 20 and 2 cyl.junction diam.25mmDouble tool h. for ext.machining on rev.Double tool holder for external machining on revolver for shaft 16x16Double drill hold. on rev.cyl.junct.d.25Double drill holder on revolver with cyl. junction diam.25mmRad.driven mill.-drill.unit on rev.Radial driven milling and drilling unit on revolver with junction for collet ESX/ER 20 ratio 1:1 ...

GeneralCNC Swiss type lathe with Fanuc control; Control: FANUC 310 iTB Working areaTurning diameter33 mmSpecial equipmentHinged belt chip conveyor with Discharge height 1200 mm Aut. bar feeder IEMCA BOSS 545/32 E, max_ L=3200 mm, incl. guide channel diam. 18 mm

x-travel: 600 mmy-travel: 400 mmz-travel: 400 mmcontrol: MSX 501 Mori Seikiwork table:: table surface area: 700 x 450 mmmax. table load: 350 kgnumber of T-slots: 4 T-slot - width: 18 mmT-slot - distance: 100 mmMain spindle: Number of revolutions: 12.000 U/minpower capacity - main spindel: 18,5 / 15 / 11 kWtool taper: BT 40 max. Torque: 110,5 Nmdiameter of forward milling spindle bearing: 70 feeds: rapid travel x/y/z: 20.000 mm/minfeed speeds: 1 - 20.000 mm/minTipp feed: 15 Steps / 0 - 1.260 mm/minTool-Presetter:: Number of Toolpositions in magazine: 40 Pos.Max. mould width: 80 mmmax. tool-dia with free toolbox: 125 mmmax. tool length: 250 mmmax. tool weight: 8 kgchange-time chip to chip: 2,8 secchange-time tool to tool: 1,0 sectotal power requirement: 34 kVAweight of the machine ca.: 7,2 tdimensions of the machine ca.: 2,8 x 3,0 x 2,9 mDocuments: Chip conveyor: triple signal light: ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Spindle bore87 mmDiametre of spindle nose170h5 mmSpindle diametre on front bearing130 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (40% DC)10 kWMain drive 1Drive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range25 - 5000 rpmAccuracy at point stopping0,01 degreeFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive s ...

GeneralCNC Turning Centre; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways620 mmTransverse stroke260 mmLongitudinal stroke795 mmClamping chuck diameter max.315 mmWork spindle (left)Spindle bore91 mmSpindle diametre on front bearing140 mmMain drive 1Drive power (100% DC)22 kWSpeed range- 4000 rpmMax. torque (40% DC)525 NmTorque (100% DC)410 NmAccuracy at point stopping0,001 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (100% DC)10 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,03 x 2,2 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with Siemens control)Y-Axis PartingTechnology cycle to parting off the workpiece by the Y-axis to a ...

GeneralMilling Specification; Control: Control M730UM with CELOS CharacteristicsMax machining diameter278 mmDimensions (L x W x H)2,82 x 2,09 x 2,15 mDrive power tool spindle5,5/5,5/3,7 kWDrive power main spindle11/15/15 kWRapid feed X / Z30/30 m/minInput precision of C-axis on Mainspindle0,001 degreeRotary tool spindle speed10000 rpmMovements X / Z260/590 mmNumber of tool stations12 Speed max.6000 rpmBar diameter max.52 mmSwing- Ø, max.755 mmMax. Turning Length192 mmWeight approx.4900 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pHigh-output spindle (Left Spindle) 15/ 11 kW, 6,000 min-1(Left Spindle) High-Output Spindle 15/11 kW (20/15 HP), 6,000 min-1 The N ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the  ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose220h5 mmSpindle diametre on front bearing160 mmSpindle bore102 mmMain drive 1Drive power (100% DC)33 kWSpeed range20 - 4000 rpmTorque (100% DC)580 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)580 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (40% DC)10 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the a ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmLongitudinal stroke850 mmTransverse stroke300 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle diametre on front bearing130 mmSpindle bore87 mmMain drive 1Drive power (100% DC)33 kWSpeed range20 - 4000 rpmTorque (100% DC)580 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the  ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightDimensions (L x W x H)4,46 x 1,88 x 2,30 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the  ...

General2-Axes Universal Turning Center with driven tools, C-axis; Control: DMG MORI SLIMline® multi-touch control Working areaSwing diameter over guide ways700 mmClamping chuck diameter max.315 mmWork spindle (left)Spindle bore91 mmBar diametre80 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (40% DC)25,5 kWDrive power (100% DC)17 kWSpeed range- 4000 rpmTorque (100% DC)283 NmMax. torque (40% DC)426 NmC-Axis Speed-200 rpmSlide 1Longitudinal stroke830 mmTransverse stroke271 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)5,44 kWFloor space/WeightDimensions (L x W x H)3,26 x 2,44 x 1,95 (4,5 x 2,44 x 1,95) mWeight approx.6300 KgDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable data exchange ...

: 1050 mm: 600 mm: 600 mm: 1200x600 mm: ISO 40 : 10.000 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2.600 mmy-travel: 700 mmz-travel: 700 mmControl: SIEMENS SINUMERIC 840D table-size: 2.900x700 mmtable weight: 2.150 Kgtool adaptor: SK 40 DIN 69872 workpiece length - max.: 300 mmworkpiece weight: 6 kgworkpiece dia.: 80/130 mm: 30 fachmain drive: 18,4/14 kWspeed: 14.000 mm/minrapid traverse: 40 m/minfeed: 40 m/minMachine on: 18.859 hSpindle hours: 5.666 hinternal coolant system feed: 40 Bar/600 l Chip coveyor: inkl. total power requirement: 55 kWweight of the machine ca.: 14.520 kgdimensions of the machine ca.: 10.280 x 7.230 x 3.042 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 2000 mm, 620 mm, 520 mm

Características técnicas: Fabricante: Hedelius Tipo: RS 60K M-2000 Año de hacer: 2007 Control: Heidenhain TNC 530i Recorrido: X 2.000 mm Y 620 mm Z 520 mm Mesa de trabajo Superficie de sujeción de la plataforma giratoria/mesa giratoria: ⌀ 600 x 480 mm Peso de la pieza de trabajo plato giratorio/mesa giratoria: máx. 300 kg Peso de la pieza de trabajo mesa fija: máx. 1.000 kg Giratorio: +10/-90 Ancho de ranura: 14/18 mm Huso Velocidad del husillo: 50 – 12.000 rpm Par de apriete: máx. 121 Nm Distancia punta del husillo – mesa: 100 – 620 mm Almacén de herramientas Número de estaciones: 56x Portaherramientas: SK40 Conducir Carga total conectada : 25 kVA Potencia total requerida: 21 kW Tensión: 400 V Dimensiones y peso Dimensiones : 5.400 mm x 4.300 mm x 3.000 mm Peso: 11.000 kg Condición Condición: Usado Funcional: Probado y completa ...

travel -x axis: 1.100 mmtravel -y axis: 610 mmtravel -z axis: 610 mmtable dimension (L x W): 1.250 x 610 mmtool adaptor: SK40 numbers of positions in the tool changer: 30 table diameter: 250 mmMilling machining centers - vertical | MTcut - V 110 Twith NC swivel rotary table (TT251HEE08)The machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: #Tags: V110T | V-110 T | V-110T | V 110T | V110The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle turning speed - stepless: 26 - 1650 U/minvoltage: 380 V0: 50 Hzrated current: 15 Aconnected load: 6,5 kWtool taper: MK 4 weight of the machine ca.: 2,3 tdimensions of the machine ca.: 1500 x 1200 x 2500 mmOperating voltage: 380 VFrequency: 50 HzControl voltage: 220 VRated current: 15 AConnection: 6.5 kWAutomatic feed: 0.05 - 0.45 mm/revColumn lifting speed: 40 mm/sColumn stroke: 450 mmDrilling spindle stroke: 200 mmDrilling zone: 430 - 1150 mmHeight adjustment of the drilling spindle: 330 - 780 mmTool holder: MK 4Table dimensions: 1525 x 560 mmTable height: 800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gillardon pesado de los años 40 con mesa cruzada

Capacidad de perforación acero/GG: 15 mm Soporte de husillo: 1 MK Proyección: 300 mm Tamaño de la mesa: 210 x 300 mm Carrera de la pluma: 110 mm Velocidades del husillo: 200 - 3000 rpm Motor de accionamiento: 380 V, 1,1 kW Espacio necesario: 850 x 420 x 1860 mm Peso: 220 kg

Key data: 730 , 730 , 850

CNC controller: FS-31IA (MAPPS III) Axes X-axis travel mm: 730 Y-axis travel mm: 730 Z-axis travel mm: 850 Rapid traverse m/min: 50 B-axis degrees: 360º (1º) Distance spindle nose - table surface mm: 100 – 830 Acceleration in the axes m/s2: 9.8 (X), 10.8 (Y), 6.9 (Z) Worktable Number of pallets: 2 Table dimensions mm: 500X500 Maximum workpiece size (D x H) mm: 800 X 1000 Max. workpiece weight kg: 500 APC time s: 7 Spindle Spindle speed rpm: 14.000 Spindle drive power kW: 22/18.5 Tool holder: No.40 Spindle torque Nm: 220 Tool system Tool holder: BT-40 Tool magazine slots: 120 With free neighboring places mm: 140 With occupied neighboring places mm: 70 Max. Tool Length mm: 500 Max tool weight kg: 12 Tool-to-tool time s: 0,9 Chip-to-chip time s: 3,3 Equipment Chip conveyor Workarea light CE conformity Coolant gun TOOL LIFE MANAGEMENT Cooling Tank capa ...

Fabricante: Alzmetall Tipo: AB 40 ST Husillo: MK 3 Bgtf39Yocw Dimensiones de la mesa: 745 x 460 mm La máquina se puede ver bajo energía

Key data: 40 mm, 900 mm

40 DONAU totalmente funcional, Condición : bien utilizado

Key data: 50 mm, 800 1/min

Velocidades infinitamente variables de 40 a 800 rpm 4 avances de perforación . Claramente buen estado original

Control: Heidenhain iTNC 530 Viajar: Eje X F/H: 3.220 / 2.600 mm Eje Y 800 mm + 65 mm Eje Z F/H 850 / 1.000 mm Ranuras en T 7 piezas Montura: SK 40 Almacén de herramientas: 100 – compartimento Velocidad del husillo: 50 - 12.000 rpm Equipo - Refrigeración interna (IKZ) 20 bar - Refrigerante del filtro de banda 1250 l -Transportador - Sistema de control de herramientas láser TM200 - Pistola de enjuague - Filtros electrostáticos de aire de escape - Volante electrónico -Partición - 2x Succión LTA - Preparado para el 5º eje

Características técnicas: Fabricante: Charmilles Tipo: HD 30CNC Año de hacer: 2004 Recorrido: X 300 mm Y 200 mm Z 300 mm Rango de diámetro del orificio: 0,3 – 3 mm Profundidad: máx. 200 mm Mesa de herramientas Dimensiones de la mesa: 500 x 300 mm Peso de la pieza: máx. 300 kg Conexión a la red Fuente de alimentación: 3/PE-380 V Rango de fluctuación: +10%/-15% Potencia de entrada: 4 kVA Dimensiones y peso: Dimensiones: 1.340 mm x 900 mm x 1.940 mm Peso: aprox. 1.200 kg Condición Condición: Usado Funcional: Probado y completamente funcional

Key data: 835 mm, 510 mm, 510 mm

Centro de mecanizado de fresadora CNC completamente funcional vertical DMG DMC 835 V Año de construcción 2006 Control: SINUMERIK 840 D Powerline Velocidad del husillo: 12.000 rpm Motor de husillo: 14 kW X - Recorrido: 835 mm Y - Recorrido: 510 mm Z - Recorrido: 510 mm Eje A: disponible Desplazamiento rápido: 30 m/min Portaherramientas: SK 40 Dispositivo de cambio de herramientas: 30 Carga de la mesa: 800 kg Área de sujeción: 1.000 x 560 mm Horas de funcionamiento: 49.660 | 12.902 h (30.01.2025) Tamaño de la máquina: 2.100 x 2.700 mm Peso de la máquina: aprox. 4.200 kg Equipo SIEMENS 840D ShopMill Escalas lineales Volante electrónico IKM – 25 bar / 30 l/min Transportador Cubierta Ubicación de la máquina: 76661 Philippsburg La máquina se puede ver in situ en cualquier momento. Esto siempre es deseable. Nos encantaría saber de ti.

tan bueno como el nuevo H & G

Key data: 50 mm

Máquina perforadora de engranajes pesados Ajustador de altura de la cabeza sobre la manivela Mesas giratorias desde - rpm 4 alimentaciones

Equipamiento de serie: Dispositivo de roscado Panel de control con pantalla OLED Capó robusto y de alta calidad con cabezal de perforación con frente ergonómicamente inclinado Iluminación LED Tope de profundidad de perforación ergonómico y rápidamente ajustable Control de velocidad continuo a través del botón giratorio central Pulsador de PARADA DE EMERGENCIA Protección contra sobrecarga térmica Tope del husillo Protección de perforación con electr. Seto Cable de conexión con enchufe Schuko Garantía de 3 años para el funcionamiento en un solo turno Capacidad de perforación continua/normal (mm) 6/8 (en E335/ST60) Capacidad de roscado (dependiente del paso) M5 Husillo B12 Profundidad de perforación (mm) 60 Proyección (mm) 220 Diámetro de la columna (mm) 70 Superficie de trabajo útil (ancho x largo) (mm) 300 x 250 Tamaño de la ranura en T (brazo), e ...