343 results

similar results found in category otras máquinas de construcción

Número de artículo: 137726224
Designed for grinding the inner and outer surfaces of tanks and lids with emery straps of different grain sgrinsizes Caps and loops with a diameter of 550-3000 mm Maximum rod length 3000 mm
Número de artículo: 137286722
HUSKY INDEX 250 year 04/2003 model P100/110 E100 350tons Screw Diameter: 120 mm Screw Stroke: 400 mm Screw L/D Ratio: 25.0:1 Max Screw Speed: 70 Rpm Max Inj Pressure: 17,158 Psi Injection Capacity: 3231 Cm3 Shooting Pot Stroke: 340 cm Shooting Pot Diameter: 110 mm Melt Channel Dia: 32 mm Distance Between Tie Bars: 667mm X 1017 mm Mold Stroke Max: 510 mm 460 Volt / 262 Amp / 60 Hz / 3Ph Asset In Excellent Overall Condition / Underpower & Running! Available Immediately 
Número de artículo: 136695614
NETSTAL SYNERGY 1500 460SYN (1999) In working condition Tonnage: 150t Mould height min/max: 400/700 Distance between tiebars: 510 x 510 Screw diameter: 45 Max. Injection volumen: 3.022 cm3/s Injection pressure: 1.753 bar Core puller: 2 Air valve: 4+1 (pneumatic shut-off-nozzle) Working hours: 93.980
Número de artículo: 136695610
NETSTAL SYNERGY 2400 1700SYN (1996) In operation. Working in clean room. Tonnage: 200t (limited due to production requirements) Mould height min/max: 460/800 Distance between tiebars: 630 x 630 Screw diameter: 70 Max. Injection volumen: 3.656 cm3/s Injection pressure: 1.801 bar Core puller: 0 Air valve: 5+2 (pneumatic shut-off-nozzle) Working hours: 106.220
Número de artículo: 136695505
HUSKY HYLECTRIC H600 RS80 / 70 (year 2011) Closing force: 6000 kN Space between columns: 1020 x 1020 mm. Size of plates: 1440 x 1480 mm. Stroke of the closing unit: 850/1450 mm. Mold height (min./max.): 330/930 mm. Mold height with support for stacked molds (min / max): 380/930 mm. Maximum separation between plates: 1780 mm. Expeller stroke: 200 mm. Ejector force: 112 kN Diameter of the columns: 168 mm. Maximum weight of the mold: 10,400 kg. Empty cycle: 3.2 s. Cycle time E6: 2.3 s. RS injection m ...
Número de artículo: 136114449
Engel 110 tons tie-bar-less IMM. This machine has new Screw and barrel. Machine will be delivered complete checked and tested ! Technical details INJECTION VOLUMEN 154 cm3 WORKING HOURS 65.725 TRAVEL OPENING 500 mm INJECTION PRESSURE 1.600 bar MIN. MOULD HIGHT 250 mm PLATEN SIZE 730 x 600 mm SCREW DIAMETER 35 mm YEAR OF BUILDING 2000 CLAMPING FORCE 1.100 kN
Número de artículo: 136114447
400 tons ENGEL tie-bar-less injection mouding machine with integrated ENGEL robot. Technical details INJECTION VOLUMEN 848cm3 SCREW DIAMETER 60mm NOMINAL CAPACITY OF PUMP MOTOR 45 kW TRAVEL OPENING 950 mm PLATEN SIZE 1.300 x 740 mm CLAMPING FORCE 4.000 kN YEAR OF BUILDING 2002 WORKING HOURS 69900 DAYLIGHT MAX 1.300 mm MIN. MOULD HIGHT 350 mm
Número de artículo: 136114445
njection Moulding machine 1600 Tons of clamping force incl. robot TE 14 Technical details CLAMPING FORCE 1650 DISTANCE BETWEEN TIE BARS (h x v) 1800x1400 PLATEN SIZE 2520x2120 TRAVEL OPENING 1800x2500 MIN. MOULD HIGHT 900/1600 DISTANCE BETWEEN TIE BARS (h x v) 270 INJECTION PRESSURE 2020 bar INJECTION VOLUMEN 3927 cm3 SCREW DIAMETER 100 YEAR OF BUILDING 2002
Número de artículo: 136114437
175 tons Krauss-Maffei injection moulding machine reconditioned. New seals in clamping unit. Technical details PLATEN SIZE 915x915 CLAMPING FORCE 1750 kn DISTANCE BETWEEN TIE BARS (h x v) 560x560 MIN. MOULD HIGHT 350mm TRAVEL OPENING 700mm SCREW DIAMETER 45mm DAYLIGHT MAX 1050mm YEAR OF BUILDING 2002 INJECTION VOLUMEN 275cm3 SHOTWEIGHT 1878 bar SHOTWEIGHT 250gr WORKING HOURS 54600
Número de artículo: 136114433
200 tons ENGEL 2-shot tie bar less injection moulding machine with rotary table on moving platen. Machine will be tested, repaired and checked and can be shown under power ! Technical details WORKING HOURS 70.000 CLAMPING FORCE 2.000 kN YEAR OF BUILDING 2002
Número de artículo: 136114429
300 tons tie-bar-less IMM built in 2008 with CC 200 control, integrated Engel robot ERC 33/2-F, crane for mould fixing (2tons), 16 hot chanel, accumulator for fast injection and parallel movements. 2 core puller fix platen, flow meter, transport belt. Plastizising screw bimetalic. Technical details YEAR OF BUILDING 2008 CLAMPING FORCE 3.000 kN PLATEN SIZE 1.100 x 1.000 mm SCREW DIAMETER 55 mm INJECTION PRESSURE 1.616/2.053 bar INJECTION VOLUMEN 511 cm3 NOMINAL CAPACITY OF PUMP MOTOR 45 kW TRAVEL OPENING ...
Número de artículo: 136114425
KRAUSS-MAFFEI KM 350/1900 C1 , año 2000 . This machine will be delivered complete checked repaired and tested and can be shown under power ! Possibility to buy machine with Sepro robot ! Equipment: 6 core-pullers, robot interface. Technical details WORKING HOURS 85000 SCREW DIAMETER 60 mm TRAVEL OPENING 920 mm DAYLIGHT MAX 1.300 mm MIN. MOULD HIGHT 530 - 1.450 mm DISTANCE BETWEEN TIE BARS (h x v) 710 x 710 mm PLATEN SIZE 1.100 x 1.120 mm YEAR OF BUILDING 2000 CLAMPING FORCE 3.500 kN NOMINAL CA ...
Número de artículo: 136114421
Engel 60 to tie-bar less IMM increased clamping force to 800 kN by Engel. Machine complete checked and tested an with new cast body on clamping side. Technical details WORKING HOURS 45.855 INJECTION VOLUMEN 154 cm3 INJECTION PRESSURE 1.581/2.190 bar YEAR OF BUILDING 2003 SCREW DIAMETER 35 mm TRAVEL OPENING 457 mm PLATEN SIZE 670 x 600 mm CLAMPING FORCE 800 kN
Número de artículo: 135653159
BÃ?NDGENS DRAHTRICHT-AND ABSCHNEIDEMASCHINE 03-99-005 Delivery time: Immediately Number: 03-99-005 Manufacturer: Bündgens Type: Wire and Cutting machine Machine Built: circa 1960 L x B x H: About 1900 x 650 x 1150 mm Weight: About 400 kg Good general condition TECHNISCHE DATEN Dimensions range: About 0.8-1.8 mm Cutting length: About 1000 mm Other accessories on request Price and other technical data on request
Número de artículo: 135653155
BÃ?NDGENS DRAHTRICHT-AND ABSCHNEIDEMASCHINE 03-99-004 Delivery time: Immediately Number: 03-99-004 Manufacturer: Bündgens Type: Wire and Cutting machine Machine Built: circa 1963 L x B x H: About 1600 x 700 x 1200 mm Weight: About 400 kg Good general condition TECHNISCHE DATEN Dimensions range: About 0.8-1.8 mm Cutting length: About 1000 mm Other accessories on request Price and other technical data on request
Número de artículo: 135653153
BÃ?NDGENS DRAHTRICHT-AND ABSCHNEIDEMASCHINE 03-99-003 Delivery time: Immediately Number: 03-99-003 Manufacturer: Bündgens Type: Wire and Cutting machine Machine Built: circa 1960 L x B x H: About 1600 x 650 x 1150 mm Weight: About 400 kg Good general condition TECHNISCHE DATEN Dimensions range: About 0.8-1.8 mm Cutting length: About 1000 mm Other accessories on request Price and other technical data on request
Número de artículo: 135653095
Husky 1.650 tons injection moulding machine incl. robot TE 14 Technical details CLAMPING FORCE 16.500 kN PLATEN SIZE 2.520 x 2.120 mm DISTANCE BETWEEN TIE BARS (h x v) 1.800 x 1.400 mm MIN. MOULD HIGHT 900 / 1.600 mm DAYLIGHT MAX 3.400 mm SCREW DIAMETER 100 mm INJECTION PRESSURE 2.20 bar INJECTION VOLUMEN 3.927 cm3 YEAR OF BUILDING 2002
Número de artículo: 135613213
Year of building : 2012 ( never used ) Nuevo Summary Robot Engel, model Viper 20 RC 200 integrated for use on Engel injection moulding machines with integrated connection. Axis travel = X = 500 mm, Y = 400 + 400 mm (tandem), Z = 1.400 mm, C = 0-90º. This robot can be used on Engel injection moulding machines !
Número de artículo: 135612854
Engel robot Viper 20 Speed, can be used on all Engel injection moulding machines. Only approx. 13.000 working hours X-axis: 500 mm, Y-axis 800 mm, Z-axis 3.320 mm
Número de artículo: 135612726
SEPRO Robot 3051 BZ PIB 7843 X = 4.000 mm, Y = 1.200 mm, Z = 2.300 mm
Número de artículo: 135612490
ENGEL ERC 74/2-E integrated robot built in 2004 with its own electrical cabinet, machine complete checked.
Número de artículo: 135612486
Engel 110 tons tie-bar-less IMM. This machine has new Screw and barrel. Machine will be delivered complete checked and tested. Technical details INJECTION VOLUMEN 154 cm3 WORKING HOURS 65.725 TRAVEL OPENING 500 mm INJECTION PRESSURE 1.600 bar MIN. MOULD HIGHT 250 mm PLATEN SIZE 730 x 600 mm SCREW DIAMETER 35 mm YEAR OF BUILDING 2000 CLAMPING FORCE 1.100 kN
Número de artículo: 135612484
400 tons ENGEL tie-bar-less injection mouding machine with integrated ENGEL robot. Technical details INJECTION VOLUMEN 848cm3 SCREW DIAMETER 60mm NOMINAL CAPACITY OF PUMP MOTOR 45 kW TRAVEL OPENING 950 mm PLATEN SIZE 1.300 x 740 mm CLAMPING FORCE 4.000 kN YEAR OF BUILDING 2002 WORKING HOURS 69900 DAYLIGHT MAX 1.300 mm MIN. MOULD HIGHT 350 mm
Número de artículo: 135612482
175 tons Krauss-Maffei injection moulding machine reconditioned. New seals in the clamping unit. Technical details WORKING HOURS 54600 SHOTWEIGHT 250gr DAYLIGHT MAX 1050mm YEAR OF BUILDING 2002 INJECTION VOLUMEN 275cm3 SHOTWEIGHT 1878 bar SCREW DIAMETER 45mm DISTANCE BETWEEN TIE BARS (h x v) 560x560 MIN. MOULD HIGHT 350mm TRAVEL OPENING 700mm PLATEN SIZE 915x915 CLAMPING FORCE 1750 kn
Número de artículo: 135612480
300 tons tie-bar-less IMM built in 2008 with CC 200 control, integrated Engel robot ERC 33/2-F, crane for mould fixing (2tons), 16 hot chanel, accumulator for fast injection and parallel movements. 2 core puller fix platen, flow meter, transport belt. Plastizising screw bimetalic. Technical details DAYLIGHT MAX 1.300 mm MIN. MOULD HIGHT 400 mm YEAR OF BUILDING 2008 WORKING HOURS 73506 INJECTION PRESSURE 1.616/2.053 bar INJECTION VOLUMEN 511 cm3 NOMINAL CAPACITY OF PUMP MOTOR 45 kW TRAVEL OPENING 900 mm  ...
Número de artículo: 135612478
KRAUSS-MAFFEI KM 350/1900 C1 , año 2000 . This machine will be delivered complete checked repaired and tested and can be shown under power ! Possibility to buy machine with Sepro robot ! Equipment: 6 core-pullers, robot interface. Technical details CLAMPING FORCE 3.500 kN YEAR OF BUILDING 2000 PLATEN SIZE 1.100 x 1.120 mm DISTANCE BETWEEN TIE BARS (h x v) 710 x 710 mm MIN. MOULD HIGHT 530 - 1.450 mm TRAVEL OPENING 920 mm DAYLIGHT MAX 1.300 mm SCREW DIAMETER 60 mm INJECTION PRESSURE 2.420 bar INJEC ...
Número de artículo: 135577749
Double column Vertical Lathe CNC Niles 4000 Retrofitted in 2008, CNC Fagor 8070, diameter 4000 mm, 2500 mm height, 2 columns Good condition
Número de artículo: 135575725
Engel 60 to tie-bar less IMM increased clamping force to 800 kN by Engel. Machine complete checked and tested an with new cast body on clamping side. Technical details WORKING HOURS 45.855 INJECTION VOLUMEN 154 cm3 INJECTION PRESSURE 1.581/2.190 bar YEAR OF BUILDING 2003 SCREW DIAMETER 35 mm TRAVEL OPENING 457 mm PLATEN SIZE 670 x 600 mm CLAMPING FORCE 800 kN
Número de artículo: 135466797
WORKING RANGE-DEBURRING MACHINE Design trough vibrator Total volume 283 ltr ELECTRICAL SPECIFICATIONS Total power consumption 7.5 kW Mains power supply 14 kVA Mains voltage 460 V Mains frequency 60 Hz
Número de artículo: 135432062
-
40.000 €
country-es ES
Distance between centers: 10000mm. Swing: 870mm. Swing over carriage: 580mm. Swing over gap: 1100mm. Spindle: 104mm. 18 speeds (10-780rpm) Equipped with chuck and steady rest. Motorized charriot.
Número de artículo: 135070615
Potatoes BMA-Ref.8045 Fryer Brand: BMA Nederland Model: RF1000 Year of manufacture: 2007 Produccion:1000 Kgs/hour capacity Deep-fat fryer for potatoes used occasion. This machine is in charge of frying the potatoes into a band of hot oil.
Número de artículo: 135070353
-
800 €
country-de DE
Torque / angle / preload Analyzer Testing and measuring instrument Brand: Treasure Type: 5143-2012 G Other details: Please see photos All information without guarantee
Número de artículo: 135070349
-
700 €
country-de DE
Screws and small part scoop Brand: Hammer Type: SKP-M-300 Other details: Please see photos All information without guarantee
Número de artículo: 134857776
Engel 110 tons tie-bar-less IMM. This machine has new Screw and barrel. Machine will be delivered complete checked and tested ! Technical details INJECTION VOLUMEN 154 cm3 WORKING HOURS 65.725 TRAVEL OPENING 500 mm INJECTION PRESSURE 1.600 bar MIN. MOULD HIGHT 250 mm PLATEN SIZE 730 x 600 mm SCREW DIAMETER 35 mm YEAR OF BUILDING 2000 CLAMPING FORCE 1.100 kN
Número de artículo: 134857774
400 tons ENGEL tie-bar-less injection mouding machine with integrated ENGEL robot. Technical details INJECTION VOLUMEN 848cm3 SCREW DIAMETER 60mm NOMINAL CAPACITY OF PUMP MOTOR 45 kW TRAVEL OPENING 950 mm PLATEN SIZE 1.300 x 740 mm CLAMPING FORCE 4.000 kN YEAR OF BUILDING 2002 WORKING HOURS 69900 DAYLIGHT MAX 1.300 mm MIN. MOULD HIGHT 350 mm
Número de artículo: 134857772
Husky 1.650 tons injection moulding machine incl. robot TE 14 Technical details CLAMPING FORCE 16.500 kN PLATEN SIZE 2.520 x 2.120 mm DISTANCE BETWEEN TIE BARS (h x v) 1.800 x 1.400 mm MIN. MOULD HIGHT 900 / 1.600 mm DAYLIGHT MAX 3.400 mm SCREW DIAMETER 100 mm INJECTION PRESSURE 2.20 bar INJECTION VOLUMEN 3.927 cm3 YEAR OF BUILDING 2002
Número de artículo: 134857769
175 tons Krauss-Maffei injection moulding machine reconditioned. Technical details WORKING HOURS 54600 SHOTWEIGHT 250gr DAYLIGHT MAX 1050mm YEAR OF BUILDING 2002 INJECTION VOLUMEN 275cm3 SHOTWEIGHT 1878 bar SCREW DIAMETER 45mm DISTANCE BETWEEN TIE BARS (h x v) 560x560 MIN. MOULD HIGHT 350mm TRAVEL OPENING 700mm PLATEN SIZE 915x915 CLAMPING FORCE 1750 kn
Número de artículo: 134857763
300 tons tie-bar-less IMM built in 2008 with CC 200 control, integrated Engel robot ERC 33/2-F, crane for mould fixing (2tons), 16 hot chanel, accumulator for fast injection and parallel movements. 2 core puller fix platen, flow meter, transport belt. Plastizising screw bimetalic. Technical details YEAR OF BUILDING 2008 CLAMPING FORCE 3.000 kN PLATEN SIZE 1.100 x 1.000 mm SCREW DIAMETER 55 mm INJECTION PRESSURE 1.616/2.053 bar INJECTION VOLUMEN 511 cm3 NOMINAL CAPACITY OF PUMP MOTOR 45 kW TRAVEL ...
Número de artículo: 134857759
KRAUSS-MAFFEI KM 350/1900 C1 , year 2000 . This machine will be delivered complete checked repaired and tested and can be shown under power ! Possibility to buy machine with Sepro robot ! Description Equipment: 6 core-pullers, robot interface. Technical details CLAMPING FORCE 3.500 kN YEAR OF BUILDING 2000 PLATEN SIZE 1.100 x 1.120 mm DISTANCE BETWEEN TIE BARS (h x v) 710 x 710 mm MIN. MOULD HIGHT 530 - 1.450 mm TRAVEL OPENING 920 mm DAYLIGHT MAX 1.300 mm SCREW DIAMETER 60 mm INJECTION PRESSURE 2 ...
Número de artículo: 134857754
2003 Summary Engel 60 to tie-bar less IMM increased clamping force to 800 kN by Engel. Machine complete checked and tested with new cast body on clamping side an. Technical details WORKING 45.855 HOURS INJECTION volume 154 cm3 INJECTION PRESSURE 1.581/2.190 bar YEAR OF BUILDING 2003 SCREW DIAMETER 35 mm TRAVEL OPENING 457 mm PLATEN SIZE 670 x 600 mm CLAMPING FORCE 800 kN
Número de artículo: 134823672
Pop Glace (Frozen pop) pleine entière fabrique des batons of glace. Usine d'Occasion entière pour liquide le entièrement rénové. Chaque machine avec 4 ou 5 ou 6 voies jusqu' à l'exigence du client. Piece mécanique rénovée. Partie entièrement rénovée avec électrique the plupart des composants PANASONIC, PLC, écran tactile, photocellule électrique pour Spot. The peut être variable length juste sur l' écran tactile. L'usine est compoused avec 3 machines pour production: 15,000 PCs par heure  ...
Número de artículo: 134570986
Digital program Central air table Side tables with air Light guards Under power, ready for test Available immediately
Número de artículo: 134193797
In Transitus S.L. we have a lot of diferent Hydraulic Valver for Injection Moulding Machines, diferent brands. Visit our homepage www.transitus.es and check the stock, also we can find your spareparts!
Número de artículo: 134193795
In Transitus S.L. we have a lot of differents electronic cards for Injection Moulding Machine, all brands. Check our stock in our homepage www.transitus.es and ask us we can find it!
Número de artículo: 134193791
Número de artículo: 134193789
Número de artículo: 134158449
Número de artículo: 134158443
Complete plastification unit for DEMAG 2.300 unit with 80 mm screw and barrel
Número de artículo: 134158435
Complete toggle for DEMAG ET 330 with reaction plate, and movil plate.
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)