522 results
similar results found in category prensas offset de pliegos: 3 colores
Número de artículo: 130075535
DE
State. 150 T force, with light sensor.
Was last properly.
Technical data:
Brand: Essa
Type: UP 1500
Year 1993
Pressing force: 150 t
Stroke: Max 150 mm min: 50 mm
Ejector top: max 50 mm, min 50 mm
Rest: See data sheets.
Número de artículo: 130040223
PL
hydraulic press 250 tonns with table size 1000x1000mm.
Daylight: 1200mm. Travel: 600mm.
Machine in working condition with lower ejector 64t.
Número de artículo: 129986032
IT
Code: 0494
Brand: COLOMBO
Model: HPC
Hydraulic hot press
Platens mm 3500 x 1300
With new aluminium platens
Opening mm 400
N° 6 pistons
Thrust tonn 140
Heating of the platens by water
Equipped with boiler
Overall dimensions : mm 4600 x 1600 x 2000 h
Weight kg 7500
Número de artículo: 129985975
CH
Pressure 45to
Spec. Pressure 70N/cm2
Dimensions of the press channel cross-section H 800 mm; B 800 mm
Filler B 750 X 1350 mm
Cycle time theo. 20 sec
Performance theo approx. 140m 3/h
Motors 380 Volt
Three-phase 50 Hz
Pump motor 22kW + 9kW. No. 18'536
Built in 1992
Availability now, pricing reserved factory Wikon, sale
Net price from space as seen
Número de artículo: 129985922
Used hydraulic press 400 tonns with table 1250 x 1250.
The machine has two heating plates 11kW/each size: 1240 x 1400mm
Travel: 630mm
Daylight: 1250mm
Motor power: 10kW
Machine weight: 10300kg
Machine height: 4000mm
Machine in good working condition, currently under power.
Número de artículo: 129915447
ES
Drücken Sie Rotary KBA Commander 70; Technische Beschreibungen:
Gericht: 578 mm; Entwicklung: 1.156 mm; Coil Breite: 1400 mm bis zu
1.680 mm; (x 2)-Ordner KF 96; ABB-Kontrollsystem; Antrieb: 4 Motoren
durch mechanische Übertragung verbunden; Manöver ABB Automation;
Alle Operationen werden vom Zentralrechner gesteuert; Nass-System:
Turbo KBA; Configuracion:4 Sat 4-0/0-4; 4 Affen 1-1; Biegemaschinen
mit (x 2) doppelte angesammelt, Produktion in Format Tabloid und
Savanne; (x 8) Porta 2 Arme KBA Spulen; Beinhaltet ...
Número de artículo: 129915197
Year of construction 1997
maximum diameter: 12 mm
Max length: 440 mm
maximum wire section: 465 mm
Capacity: 30-40 PCs / min.
good condition!
Número de artículo: 129791185
New machine!
EPS Compactor C50
Press polystyrene EPS-C50 compacts EPS waste at a ratio of 40: 1.
Ironing polystyrene by using offered compactors EPS reduces the cost
and the space occupied by the EPS waste. EPS presses are very easy to
use and safe, can be operated by one person. In addition, the
compression of waste polystyrene foam and its re-use can help us to
care about the environment.
Technical specifications:
• Total power consumption: 6,2 kW
• Compactor size: 2000 x 600 x 1700mm
• Weight: 69 ...
Número de artículo: 129758243
gebr. Hydr. Double column frame press make KNUTH
Model KP 100. No.: 118538 built in 1999
To print power 100
Table size 900 x 600 mm
Tappet surface 700 x 400 mm
Piston stroke 500 mm
Clearance between the stands 1050 mm
Height 500 mm
Lifting speed 2 mm / s
Rapid traverse 22 mm / s
Motor 2,2 kW
External dimensions: Width 2000 mm
Depth 1000 mm
Height 2300 mm
Weight approx. 1600 kg
Número de artículo: 129758216
Swan neck TYPE
Ton. 30 MACHINE
FLOOR 900 x 520 mm.
POKER RIDE 400 mm.
MAX. 600 mm.
10 Hp POWER.
WEIGHT 3000 Kg.
Número de artículo: 129707120
Code: 0490
Brand: ITALPRESSE
Model: V/3
Mechanical cold press
Platens size mm 3000 x 1200
Opening mm 650
n° 3 pressure screws
Installed power Hp 1
Electrical up/down movement
Overall dimensions: mm 3350 x 1200 x 1650 h
Weight kg 1100
Número de artículo: 129707100
Eccentric press with 35 to pressure performance
The engine was to the end in a concatenation with other machines in
use.
Was then stored, because it was intended for other missions, but it no
longer happened.
State and execution: see images
Loading the machine by forklift
Contact person Mr. Mueller see also our over 200 more deals at.
(Changes and errors in the technical data, information
and prices and subject to prior sale!)
Número de artículo: 129703612
Drucklstg.: 25 to.
Table size: 445 x 305 mm
Throat depth: 155 mm
Height: 350 mm
Stroke adjustment: 10-60 mm
Tappet adjustment: 45 mm
Total power: 1.1 KW / 400 V
Machine weight: 1000 kg
Equipment / Accessories:
height-adjustable machine table
All technical data are created according to our best knowledge and
existing documents; Expressly reserved by mistake.
Each party has the opportunity to test the machine before making a
purchase in our factory under power.
Número de artículo: 129532123
PDS-E
PCS-H Farb- und Registerfernsteuerung
Ryobimatic Filmfeuchtwerke mit Technotrans Umwälzung und Kühlung
S-APC halb-automatischer Plattenwechsler
automatische Farbwalzenwascheinrichtung
automatische Gummituch- und Druckzylinderwascheinrichtung
IR-Trockner Baldwin
Puderapparat
Tiefstapelauslage
Serienzubehör
Número de artículo: 129532116
Lackturm
CP2000 Center mit Fernsteuereinrichtung für Farbzonen, Farbduktoren
sowie Umfang-, Seiten- und Diagonalregister mit Job Memory Card und
Touch Screen
Alcolor Vario Filmfeuchtwerke mit Umwälzung und Kühlung
Farbwerktemperierung
Autoplate automatisches Plattenwechselsystem
Preset automatische Formateinstellung
automatische Farbwalzenwascheinrichtung
automatische Gummituch- und Druckzylinderwascheinrichtung
Puderapparat
IR-Trockner
verlängerte Hochstapelauslage mit AirTransfer System
Serienzubeh ...
Número de artículo: 129497148
FR
ERCA-shape SEAL thermoforming machine for round pots, type: EFO 1000,
number: 67605, year of construction: 2007, 400 V, 50 Hz, 209 A, 145
KVA capacity: 36000 pots per hour, volume pots: 125 ml, production
hours: 17000 hours, including film unwind film for jumbo roll, film
width: 1600 mm , plastic cutter for residual film, preheating table
and heating system, crusher in soundproofing cabinet, suction system
with big bag loader, 2 silo's for pots, suitable for 385000 pots for
each silo, switch cabinet and various spa ...
Número de artículo: 129497097
Four pillar press 12, 5to SCHULER Presse pressure power punch
Four pillar press of Schuler
According to the rating plate to 12.5
The machine was taken out of production some years ago because the
production ran out.
Since you stand in the camp.
We have taken it over so and sell them exactly so; unchecked -
as"tinkering" or obtaining spare parts.
Contact person Mr. Mueller see also our over 200 more deals at.
(Changes and errors in the technical data, information
and prices and subject ...
Número de artículo: 129496991
gebr. Hydr. Workshop press make metal force
Model WPP 160 MVZ. No.: 12P0065 year of 2012
Pressure power 160 to
Stroke 400 mm
Stand width 1100 mm
Mounting height approx. 900 mm
Press speed 2.3 mm / S
Feed speed 8.9 mm / S
Reverse speed 12 mm / S
Oil tank contents 30 l
Connection voltage 400 V
Motor power up to 3 kW
External dimensions:
Width 2000 mm
Depth 1200 mm
2270 mm
Weight approx. 1575 kg
Número de artículo: 129466816
Workshop press 150 T
Data:
-Elektohydraulisch or hand pump
-Electric
-Hydraulic
-adjustable cylinder (right / left)
Force 150 t
-AussenmaÃ?e: 2500x1500x600mm
Hub of the cylinder approx. 300mm
Weight approx. 1500 kg
Pressure display
-Height-adjustable table
Get out of table width: 1150 mm
Price: On request
Número de artículo: 129466808
Workshop press 100 T
Data:
-Elektohydraulisch or hand pump
-Electric
-Hydraulic
-adjustable cylinder (right / left)
Compressive force 100 t
-AussenmaÃ?e: 2500x1500x600mm
Hub of the cylinder approx. 300mm
Weight approx. 1000 kg
Pressure display
-Height-adjustable table
Get out of table width: 1000 mm
Price: On request
Número de artículo: 129466804
Workshop press 60 T
Data:
-Elektohydraulisch or hand pump
-Electric
-Hydraulic
Pressure power 60 t
-AussenmaÃ?e: 2400x1400x600mm
Hub of the cylinder 300mm
Weight 600 kg
Pressure display
-Height-adjustable table
Get out of table width: 900 mm
Price: On request
Número de artículo: 129397459
SANGIACOMO SG 20 IN THE
Built in 1987
Machine Nr. 4079
20 to
Tappet adjustment 60 mm
Stroke adjustment 0-60 mm
Hub 145/min
Clamping pin 25 mm
Tabletop 300x450mm
Número de artículo: 129152451
Narrow band press for abrasive hydraulic knuckle-joint glue press,.
380 volts 50 Hz.
Foot operated
Número de artículo: 129152436
Hydraulic glue press with heating base,
infinitely variable temperature setting,
stuffenlose setting of the adhesive holding time,
Power: 5 kW, 380 v 50 Hz;
Two-hand operation.
Número de artículo: 129050166
Force of pressure: 25 t
Adjustable stroke: 5-80 mm
Slide adjustable: 60 mm
Plunger strokes p. min: 120
Adjustable table: 150 mm
Table transmission rate: 100 x 150 mm
Security clearance: 160 mm
Overtravel distance: 36
Weight: 1750 kg
Facilities/features:
Two-hand operation
-Emergency off pushbutton
-Adjustable table
Número de artículo: 129050147
It is a used Fortuna bun press Gr. 4 (semiautomatic, 30-teilig)-BJ
2015 for sale. The sandwich press is fully functional in almost like
new condition and runs very quietly. The press plate and the knife
star are in impeccable condition. The machine has been repainted. The
weight of the machine is 40gr. -110 gr. each piece of dough
(30-teilig). Dough deposit: 1200gr. -3300gr. Dough should be just
pressed and cut a higher weight range is possible.
Incl. 3 x effect plates (active panels more upon request).
Height: 1 ...
Número de artículo: 129050092
Machine in working condition, clutch facing requires replacement.
Número de artículo: 128981524
RS
BRUDERER BSTA 30
Pressure 30 ton
up to 600 number of strokes/min feeder from left to right
Table size: 545 x 470 mm
Central lubrication
Total power requirement: 5.5 kw
Weight of the machine: 2.5t
Número de artículo: 128980660
Technical data:
-Stamping of frames, cutting adhesive holes, glue injection
-Max profile height 120 mm - smallest frame dimension 400 x 400 mm -
punch up to 105 mm
-Working pressure 6-8 bar
-with: - trimmer - gluing equipment - 2 vertical pneumatic presser
-Abutment foldaway
-adjustable punch heads
-2 stk support arms swivel
-Foot switch
-separate compressed air storage
-separate chip cleaner - total approx. footprint
B 1200 x H 1500 X 1500 mm
-Weight approx. ...
Número de artículo: 128898659
Technical data:
-Max profile height 120 mm - min. frame size 400 x 400 mm - punch up
to 80 mm
-Nutmass of adjustable 35 - 50 mm
-Cutting force at 7 bar 60 kN
-Working pressure 7 bar
-with:-separate movable control panel
-Footswitch - 2 vertical pneumatic presser
-Abutment foldaway
-adjustable punch heads
-2 stk support arms swivel
-separate cement - pump Cabinet - total approx. footprint B
2500 x H 1300 / 1800 X 2400 mm
-Weight approx. 950 kg
Número de artículo: 128800935
NL
AYEL-TECH WORKSHOP PRESS
TYPE WP 15
-Capaciteit 15 ton
-Cilinderslag 260 mm
-Werkbreedte 500 mm
-Electric of hand-mat bedienbaar
-Pressure gauge
-Noodstop
-400V
DUTCHMACH
Metal working machinery
ENSCHEDE - NETHERLANDS
(3 km from the German border)
Número de artículo: 128740801
UK
This listing is for an Kelpack 300XL waste compactor previously used
for the newspaper industry to compact newspapers and magazine waste.
Número de artículo: 128705569
Tablet press pill machine
Serial - 40438-159
manual/auto single punch tablet press pill making machine,
pill diameter 25mm, pill height 10mm
Número de artículo: 128705560
Número de artículo: 128705558
Número de artículo: 128705556
Double press, hydr. /.
SMG DS 25 year / 1978
Pressing force / 250 kN
Hub / 150 mm
Table / 560 x 400 mm
Installation height / 400 m
Número de artículo: 128705554
Número de artículo: 128705552
Número de artículo: 128705548
Once change press C frame press, hydr. /.
Neff EP 50 year / 2001
Pressing force / 500 kN
Hub / 550 mm
Table / height: 600 x 600 mm / 800 mm
Número de artículo: 128705470
BRIQUETTE machine type POR JUNIOR . second hand
?Motor HP 7,5 – KW 5,5
?Diameter of briquetts 50 mm
?Max briquetts lenght 50 mm with pusher for short briquetts
?Nr. 10 cycles/min
?Nr. 03 hydraulic cylinders
?Production 0,468 m3/h (+/- 10% ) with max humidity 17% ( this value
is indicative and can change on the basis of physical structure of
material )
?Height 1500 mm
?Front 1100 mm
?Depht 1680 mm
?Weight kg 680
?Oil tank capacity lt 110
?Drum of feeding diameter 1000 mm
?Pump 40 lt/min
?Inspection d ...
Número de artículo: 128705468
MANUAL HYDRAULIC VERTICAL CLAMPING machine type SML SP 2600 PO
with manual hydraulic cylinders
composed of :
n.04 vertical cylinders
n.02 horizontal cylinders
useful length mm. 2600
useful height mm. 1800
cylindrical run mm. 60
Oledinamic cylinders thrust max. kgs. 1500
Número de artículo: 128669893
Stord Bartz twin screw press , stainless steel
Número de artículo: 128547876
For sale is a pneumatic press by Schmidt. It is functional, but a
valve is need of repair. It can build not the total pressure.
Número de artículo: 128474317
US
HEIDELBERG XL105-6LX(72 x 105cm), Alter c.2008, Seriennr. FS000926,
ca. 305 Millionen, 18.000 Sph, Pressezentrum, Achsen-Steuerung,
Printect Wallscreen, Alcolor Vario-Dämpfung, Preset Plus Anleger,
Preset Plus X2 Ausleger, Autoplate, Intercom, Heidelberg Drystar 3000
IR-Trockner (CAN), Heidelberg Airstar, Heidelberg Staticstar,
Preloader, Heidelberg Combistar Beta C kombiniert Kühlschrank/Tinte
temp Control (wassergekühlt), Heidelberg Scrollstar, Heidelberg
Powderstar AP500 können, Tresu Cameracle Coater, Techn ...
Número de artículo: 128439371
FORMING and EMBOSSING PRESS - VILMAR PS 120
platens dimension 1200x500 mm
opening 310 mm
total thrust 300 tons
No. 4 thrust cylinders diameter 160 mm each
hydraulic pump power 5,5 kw (7,5 hp)
Número de artículo: 128342123
SK
Work table area: 200x950 mm
Force: 4900KN
Weight: 44000kg
Dimensions bottom: 3300x1100x5500mm
Número de artículo: 128342100
Manufacturer: Germany Blättner - Pressen
Machine ID 922033
Pressure: 1300 tons
Work table: 1450 x 1600 mm
Número de artículo: 128342089
Manufacturer: Piesok
Weight: 22,6 t
Machine dimensions: 4500 x 1600 x 3800 (height)
Número de artículo: 128308343
Ott veneer press
Type: 300 K 150
3 floors
Press area 3000 x 1350 mm
Kgcm pressure 7.5
6 press piston
Heating with hot water
Número de artículo: 128280902
Used rolls press / divider W & P, type: Rotamat CN
of-Bäckereizustand - - including 2 working plates, Ã 30
bowls - condition: good, ready to use
-El. Connection: 380V 3ph, 50 Hz, 2.1 / 6 A
Inspection and test run are possible by arrangement like.
Usted no ha encontrado su máquina deseada?
enviar consulta
a todos los distribuidores (no hay registro necesario)
