3536 results

similar results found in category recogedoras de pedidos

Número de artículo: 136070173
1475 KW Caterpillar G3516C Natural Gas Sound Enclosed Generator Sets\(25) 1475 KW Caterpillar G3516C Natural Gas Sound Attenuated Containergenerator Sets, Die Doppelfrequenz wird auf 50 HZ oder 60 HZ, 1500/1800 U/min, 400/480 Volt, Jahr 2012 bis 2014 wurden alle Leistungspakete nach OEM-Wartungsplan gewartet. Alle Erdgas-Strompakete sind in gutem Zustand und können an jeden weltweiten Standort transportiert werden, um sofort Strom zu produzieren. Bitte kontaktieren Sie uns.
Número de artículo: 136070172
1475 KW Caterpillar G3516C Natural Gas Sound Enclosed Generator Sets Twenty Five (25) 1475 KW Caterpillar G3516C Natural Gas Sound Attenuated Containerized Generator Sets, dual frequency will operate on 50 HZ or 60 HZ, 1500/1800 rpm, 400/480 volt, Year 2012 to 2014, all power packages were maintained in accordance with OEM maintenance schedule.All natural gas power packages are in good condition and can be transported to any worldwide location to produce immediate power. Please serious inquiries contact us.
Número de artículo: 135928792
Peristaltic pump. Brand Name: DL. Type: 55 Year: 1998 8, 2M3/h 4 Kw 1420/40 Rpm 10 bar pressure Dimensions: 1.000 mm wide, 1,000 mm long, 2,000 mm high.
Número de artículo: 135891098
MCS BEAM DYEING FOR FABRIC, YEAR 1973WORKING WIDTH 2.000 MMMANUAL PROGRAMMER TIME/TEMPERATURE \ r \ nINTERNAL DIAM. 1.100 MMCAPACITY 2.000 LTWO BEAMS UND ONE TROLLEY
Número de artículo: 135891096
NOSEDA BEAM DYEING FOR FABRIC, YEAR 1978WORKING WIDTH 3.200 MMTHERMOELETTRONICA PROGRAMMER CT 401nINTERNAL DIAM. 1.100 MMCAPACITY 5.000 LONE BEAM AND ONE TROLLEY
Número de artículo: 135891091
NOSEDA BEAM DYEING FOR FABRIC, YEAR 1979WORKING WIDTH 3.200 MMTHERMOELETTRONICA PROGRAMMER CT 401nINTERNAL DIAM. 1.100 MMCAPACITY 5.000 LTWO BEAMS UND ONE TROLLEY
Número de artículo: 135891084
MCS BEAM DYEING FOR FABRIC, YEAR 1970WORKING WIDTH 2.000 MMTHERMOELETTRONICA PROGRAMMER CT 411INTERNAL DIAM. 1.120 MMCAPACITY 3.000 LTWO BEAMS UND ONE TROLLEY
Número de artículo: 135840410
BETA DYEING PADDER, ROLLER WIDTH 2.100 MM, YEAR 1989-JusING UNIT FULLY UPGRADED MITH MIXING KITCHEN UND DOSING PUMPIN PERFERCT WORKING CONDITION
Número de artículo: 135840409
BETA DYEING PADDER, ROLLER WIDTH 2.100 MM, YEAR 1989 DYEING UNIT FULLY UPGRADED WITH MIXING KITCHEN AND DOSING PUMP IN PERFERCT WORKING CONDITION
Número de artículo: 135839981
-
3.300 €
country-es ES
B&R 2005 PLC SPS CONTROLLER 3BP 152.4 FULL CPU SOLD €3300 VAT NOT INCL. Status: AS NEW! Transport (fixed price up to 5kg: 35.49 EUR): Bulgaria, Denmark, Slovenia, Finland, Greece, Hungary, Ireland, Latvia, Lithuania, Malta, Poland, Rep. Czech Republic, Romania, Sweden. NO warranty is provided for this product.
Número de artículo: 135727756
-
35.000 €
country-pt PT
Mandriladora Scharmann WF 140 Opticut Drill head with deep hole drilling with TBT drill Table size 3000 x 2500 mm X 5500 mm Y 3000 mm Z 2300 mm Digital Heidenhain 3 axes Nominal drilling Depth: 1500 mm Drilling Height: 1500 mm Motor power: 18 kw Speed: 50-4800 RPM Maximum speed: 7800 RPM Spindle Head Bracket: 4 DIN 55021 size
Número de artículo: 135727173
MCS HT JIGGER DYEING MACHINE, MODEL COMBY, YEAR 1997HIDROLIC DRIVETERMOELETTRONICA PROGRAMMER
Número de artículo: 135727172
MCS HT JIGGER DYEING MACHINE, MODEL COMBY, YEAR 1997 DIAMETER 1.100 MM HIDROLIC DRIVE TERMOELETTRONICA PROGRAMMER
Número de artículo: 135727167
OSTHOFF SINGEING RANGE, ROLLER MIT 1.800 MM, YEAR 1983SINGEING UNIT MIT 2 OSTHOFF BURNERS\DESIZING TANK UND PADDEREXIT BY A-FRAME BATCHERPREPARATION TANK mit 2 MIXERSDUST UND SPARKS abholung
Número de artículo: 135727166
OSTHOFF SINGEING RANGE, ROLLER WITH 1.800 MM, YEAR 1983 HIGH ENTRANCE WITH GUIDERS SINGEING UNIT WITH 2 OSTHOFF BURNERS BRUSHING DESIZING TANK AND PADDER EXIT BY A-FRAME BATCHER PREPARATION TANK WITH 2 MIXERS DUST AND SPARKS COLLECTION
Número de artículo: 135688284
LISA SUEDING MACHINE FÜR KNITS UND WOVEN MODEL 3E-DP, YEAR 2003SUEDING UNIT MIT 3 CARBON BRUSH CYLINDERSEXIT BY FOLDER UND A-FRAME BATCHERDUST COLLECTOR MIT 7 Ärmel
Número de artículo: 135688283
LISA SUEDING MACHINE FOR KNITS AND WOVEN MODEL 3E-DP, YEAR 2003 HIGH ENTRANCE WITH BIANCO DOGAL SPREADING DEVICE ROLLER WIDTH 2.100 MM SUEDING UNIT WITH 3 CARBON BRUSH CYLINDERS EXIT BY FOLDER AND A-FRAME BATCHER DUST COLLECTOR WITH 7 SLEEVES
Número de artículo: 135688280
CIBITEX SANFOR FÜR WOVEN UND KNITS, YEAR 2002INKING UNIT: RUBBER WIDTH 1.900 MM, CYLINDER WIDTH 2.400 MM. Mit dem EXISTING RUBBER BELT DIE WW IS 1.800 MM, INSTALLING A WIDER RUBBER BELT THE WW WILL REACH UP TO 2.300 MMPALMER FOR FIXATION WITH DRUM DRYER, KONVEYOR BELT FÜR ACCUMULATION UND COOLING CYLINDEREXIT BY A-FRAME BATCHER
Número de artículo: 135688279
CIBITEX SANFOR FOR WOVEN AND KNITS, YEAR 2002 ENTRANCE WITH UNWINDING STATION FOR A-FRAME AND CORINO DOGAL SPREADING DEVICE STEAMING DRUM SHRINKING UNIT: RUBBER WIDTH 1.900 MM, CYLINDER WIDTH 2.400 MM. WITH THE EXISTING RUBBER BELT THE WW IS 1.800 MM, INSTALLING A WIDER RUBBER BELT THE WW WILL REACH UP TO 2.300 MM PALMER FOR FIXATION WITH DRUM DRYER, CONVEYOR BELT FOR ACCUMULATION AND COOLING CYLINDER EXIT BY A-FRAME BATCHER
Número de artículo: 135688272
Komplette Zig-Zag-Futterlinie: Für die Zickzack-Bandfütterung, MODEL AEZD-1300-5-8000/RB, mit Feeder + Streightener + Decoiler in einem Block, mit folgenden Eigenschaften: \ r-Maximale Breite des Bandes ... mm 1306-Maximum Riemen Dicke ... mm 5-Maximaler Teil des Bandes, 420 N/mm ... mm ² 1000 x 3.0-Maximaler Teil des Bandes, 420 N/mm ... mm ² 650 x 4.0-Maximaler Teil des Bandes, 420 N/mm ... mm ² 350 x 5.0-Maximales Gewicht der Spule ... 8000 kg-Maximaler Außendurchmesser der Spule ... 400-Adjustable Dorndur ...
Número de artículo: 135688271
Complete Zig-Zag feed line: for zig-zag band feeding, MODEL AEZD-1300-5-8000 / RB, with feeder + streightener + decoiler in a single block, with the following characteristics: - Maximum width of the strap ...mm 1306 - Maximum strap thickness . mm 5 - Maximum section of the strap, 420 N / mm .. mm² 1000 x 3.0 - Maximum section of the strap, 420 N / mm .. mm² 650 x 4.0 - Maximum section of the strap, 420 N / mm .. mm² 350 x 5.0 - Maximum weight of the coil ... 8000 kg - Maximum outside diameter of the co ...
Número de artículo: 135653096
Husky 1,650 Tonnen Spritzgießmaschine inkl. Roboter TE 14Technische Details CLAMPING FORCE 16.500 kNPLATEN SIZE 2.520 x 2.120 mmDISTANCE BETWEEN TIE BARS (h x v) 1.800 x 1.400 mmMIN. MOULD HIGHT 900/1.600 mmDAYLIGHT MAX 3.400 mmSCREW DIAMETER 100 mmINJJECTION PRESSURE 2.20 barINJECTION VOLUMEN 3.927 cm3YEAR OF BUILDING 2002
Número de artículo: 135653095
Husky 1.650 tons injection moulding machine incl. robot TE 14 Technical details CLAMPING FORCE 16.500 kN PLATEN SIZE 2.520 x 2.120 mm DISTANCE BETWEEN TIE BARS (h x v) 1.800 x 1.400 mm MIN. MOULD HIGHT 900 / 1.600 mm DAYLIGHT MAX 3.400 mm SCREW DIAMETER 100 mm INJECTION PRESSURE 2.20 bar INJECTION VOLUMEN 3.927 cm3 YEAR OF BUILDING 2002
Número de artículo: 135613214
Baujahr: 2012 (nie genutzt) NuevoRoboter Engel, Modell Viper 20 RC 200 für den Einsatz auf Engel-Spritzgießmaschinen mit integriertem Anschluss. \ r \ n \ r \ nAxis travel = X = 500 mm, Y = 400 + 400 mm (Tandem), Z = 1.400 mm , C = 0-90 º. \ r \ n \ r \ nDieser Roboter kann auf Engel-Spritzgießmaschinen eingesetzt werden!
Número de artículo: 135613213
Year of building : 2012 ( never used ) Nuevo Summary Robot Engel, model Viper 20 RC 200 integrated for use on Engel injection moulding machines with integrated connection. Axis travel = X = 500 mm, Y = 400 + 400 mm (tandem), Z = 1.400 mm, C = 0-90º. This robot can be used on Engel injection moulding machines !
Número de artículo: 135612855
Engel Roboter Viper 20 Speed, kann auf allen Engel-Spritzgießmaschinen eingesetzt werden. Nur ca. 13.000 Arbeitsstunden X-Achse: 500 mm, Y-Achse 800 mm, Z-Achse 3.320 mm
Número de artículo: 135612854
Engel robot Viper 20 Speed, can be used on all Engel injection moulding machines. Only approx. 13.000 working hours X-axis: 500 mm, Y-axis 800 mm, Z-axis 3.320 mm
Número de artículo: 135612726
SEPRO Robot 3051 BZ PIB 7843 X = 4.000 mm, Y = 1.200 mm, Z = 2.300 mm
Número de artículo: 135612490
ENGEL ERC 74/2-E integrated robot built in 2004 with its own electrical cabinet, machine complete checked.
Número de artículo: 135612487
Engel 110 Tonnen ungeschaltendes IMM. Diese Maschine hat neue Schraube und Fass. Maschine wird komplett überprüft und getestet. \ r \ n \ r \ nTechnische Details INJECTION VOLUMEN 154 cm3WORKING HOURS 65.725\w\ENING 500 mmINJECTION PRESSURE 1.600 bar MOULD HIGHT 250 mmSCREW DIAMETER 35 mmYEAR OF BUILDING 2000CLAMPING FORCE 1.100 kN
Número de artículo: 135612486
Engel 110 tons tie-bar-less IMM. This machine has new Screw and barrel. Machine will be delivered complete checked and tested. Technical details INJECTION VOLUMEN 154 cm3 WORKING HOURS 65.725 TRAVEL OPENING 500 mm INJECTION PRESSURE 1.600 bar MIN. MOULD HIGHT 250 mm PLATEN SIZE 730 x 600 mm SCREW DIAMETER 35 mm YEAR OF BUILDING 2000 CLAMPING FORCE 1.100 kN
Número de artículo: 135612485
400 Tonnen ENGEL, gebundungsloser Spritzgussmaschine mit integriertem ENGEL-Roboter. \ r \ n \ n \ nTechnische Details INJECTION VOLUMEN 848cm3SCREW DIAMETER 60mmNOMINAL CAPACITY OF PUMP MOTOR 45 kWTRAVEL OPENING 950 mmPLATEN SIZE 1.300 x 740 mm \ RCLAMPING FORCE 4.000 kNYEAR OF BUILDING 2002WORKING HOURS 69900DAYLIGHT MAX 1.300 mm MOULD HIGHT 350 mm
Número de artículo: 135612484
400 tons ENGEL tie-bar-less injection mouding machine with integrated ENGEL robot. Technical details INJECTION VOLUMEN 848cm3 SCREW DIAMETER 60mm NOMINAL CAPACITY OF PUMP MOTOR 45 kW TRAVEL OPENING 950 mm PLATEN SIZE 1.300 x 740 mm CLAMPING FORCE 4.000 kN YEAR OF BUILDING 2002 WORKING HOURS 69900 DAYLIGHT MAX 1.300 mm MIN. MOULD HIGHT 350 mm
Número de artículo: 135612483
175 Tonnen Krauss-Maffei-Spritzgießmaschine saniert Neue Dichtungen in der Spanneinheit. \ r \ n \ r \ nTechnische Details WORKING HOURS 54600SHOTWEIGHT 250grDAYLIGHT MAX 1050mmYEAR OF BUILDING 2002INJECTION VOLUMEN 275cm3SHOTWEIGHT 1878 barSCREW DIAMETER 45mmDISTANCE BETWEEN TIE BARS (h x v) 560x560MIN. MOULD HIGHT 350mmTRAVEL OPENING 700mmPLATEN SIZE 915x915rCLAMPING FORCE 1750 kn
Número de artículo: 135612482
175 tons Krauss-Maffei injection moulding machine reconditioned. New seals in the clamping unit. Technical details WORKING HOURS 54600 SHOTWEIGHT 250gr DAYLIGHT MAX 1050mm YEAR OF BUILDING 2002 INJECTION VOLUMEN 275cm3 SHOTWEIGHT 1878 bar SCREW DIAMETER 45mm DISTANCE BETWEEN TIE BARS (h x v) 560x560 MIN. MOULD HIGHT 350mm TRAVEL OPENING 700mm PLATEN SIZE 915x915 CLAMPING FORCE 1750 kn
Número de artículo: 135612481
300 Tonnen gebundene IMM im Jahr 2008 mit CC 200-Steuerung gebaut, integrierter Engel-Roboter ERC 33/2-F, Kran für die Formenbefestigung (2Tonnen), 16 Heißkanel, Akku für schnelle Einspritzung und Parallelbewegungen. 2 Kernzieher fixieren platen, Durchflussmesser, Transportband. Das Plastizisierungs-Schrauben bimetalic. \ r \ n \ nTechnische Details DAYLIGHT MAX 1.300 mmMIN. MOULD HIGHT 400 mmWORKING HOURS 73506INJECTION PRESSURE 1.616/2.053 bar\T. 511 cm3NOMINAL CAPACITY OF PUMP MOTOR 45 kWTRAVEL OPENING 900 mm ...
Número de artículo: 135612480
300 tons tie-bar-less IMM built in 2008 with CC 200 control, integrated Engel robot ERC 33/2-F, crane for mould fixing (2tons), 16 hot chanel, accumulator for fast injection and parallel movements. 2 core puller fix platen, flow meter, transport belt. Plastizising screw bimetalic. Technical details DAYLIGHT MAX 1.300 mm MIN. MOULD HIGHT 400 mm YEAR OF BUILDING 2008 WORKING HOURS 73506 INJECTION PRESSURE 1.616/2.053 bar INJECTION VOLUMEN 511 cm3 NOMINAL CAPACITY OF PUMP MOTOR 45 kW TRAVEL OPENING 900 mm  ...
Número de artículo: 135612479
KRAUSS-MAFFEI KM 350/1900 C1, año 2000. Diese Maschine wird komplett repariert und getestet geliefert und kann unter Strom gezeigt werden! Es besteht die Möglichkeit, die Maschine mit dem Roboter Sepro zu kaufen! Equipment: 6 Kernzieher, Roboterschnittstelle. \ r \ n \ r \ r \ n \ r \ nTechnische Details CLAMPING FORCE 3.500 kNYEAR OF BUILDING 2000PLATEN SATEN IZE 1.100 x 1.120 mmDISTANCE BETWEEN TIE BARS (h x v) 710 x 710 mm\ Nmin. MOULD HIGHT 530-1.450 mmTRAVEL OPENING 920 mmDAYLIGHT MAX 1.300 mmSCREW DIAMETER  ...
Número de artículo: 135612478
KRAUSS-MAFFEI KM 350/1900 C1 , año 2000 . This machine will be delivered complete checked repaired and tested and can be shown under power ! Possibility to buy machine with Sepro robot ! Equipment: 6 core-pullers, robot interface. Technical details CLAMPING FORCE 3.500 kN YEAR OF BUILDING 2000 PLATEN SIZE 1.100 x 1.120 mm DISTANCE BETWEEN TIE BARS (h x v) 710 x 710 mm MIN. MOULD HIGHT 530 - 1.450 mm TRAVEL OPENING 920 mm DAYLIGHT MAX 1.300 mm SCREW DIAMETER 60 mm INJECTION PRESSURE 2.420 bar INJEC ...
Número de artículo: 135612471
5 axis-Vertical Machining Center SPINNER Modell U5-620 Serie Nr. UT0286 (neu im Jahr 2013) ausgestattet mit: Optik, Spindelgeschwindigkeit 12.000 U/min, Kühlmittel durch Spindel 22 bar, Werkzeugmagazin für 32 Werkzeuge, 10 Werkzeughalter, Chip-Fördergelnahmel-Typ, Papierfilter für die Kühlmittelreinigung, Renishaw-Sonde, Siemens 840DE-SL Control, Handbücher.
Número de artículo: 135612470
5 ejes-vertical centro de mecanizado SPINNER modelo U5-620 serie no. UT0286 (nuevo en 2013) equipado con: Básculas ópticas, velocidad del husillo 12.000 RPM, refrigerante a través del husillo 22 bar, herramienta para 32 herramientas, 10 portaherramienta, tipo de bisagra transportadora de chips, filtro de papel para limpieza de refrigerante, sonda Renishaw, control Siemens 840DE-SL, Manuales.
Número de artículo: 135577788
Telescopic Conveyor, NEW. The ergonomic design allows the operations to be done by one or two persons, by a simple and easy movement Extension:7.700 mm. Total length: 13.283 mm (include anti-collision bumper) Express Snoot. Band width: 600 mm. Equipped with PVC band with high resistance wear. The band movement is made by a motorized drum and the telescopic movement, by a motor reducer. controlled through a PLC. Moving is head up and down, and left and right, the Express Snoot put the goods where it is needed, by ...
Número de artículo: 135577783
Número de artículo: 135577271
2 Farben DDS Continuos Dämpfung Front Konsole mit Kontrollen Powder Spray Cooling Gerät Easy Plattenlader mit schnellen Action-Plate-Klemmen \ nElectronic Doble Blechdetektor Segment Klingen mit vertikalen Tintenreglern \ r Sehr gute Bedingungen \ nAvailable immediately
Número de artículo: 135577270
2 Colors DDS Continuos dampening Front console with controls Powder spray Straight Cooling device Easy plate loader with quick action plate clamps Electronic doble sheet detector Segment blades with vertical ink regulators Very good conditions Available immediately
Número de artículo: 135575726
Engel 60 bis Krawatte weniger IMM erhöhte Spannkraft auf 800 kN von Engel. Maschine komplett geprüft und getestet eine mit neuem Gusskörper auf Spannseite. \ r \ r \ nTechnische Details WORKING HOURS 45.855INJECTION VOLUMEN 154 cm3INJECECTION PRESSURE 1.581/2.190 barYEAR OF BUILDING 2003SCREW DIAMETER 35 mmTRAVEL OPENING 457 mm
Número de artículo: 135575725
Engel 60 to tie-bar less IMM increased clamping force to 800 kN by Engel. Machine complete checked and tested an with new cast body on clamping side. Technical details WORKING HOURS 45.855 INJECTION VOLUMEN 154 cm3 INJECTION PRESSURE 1.581/2.190 bar YEAR OF BUILDING 2003 SCREW DIAMETER 35 mm TRAVEL OPENING 457 mm PLATEN SIZE 670 x 600 mm CLAMPING FORCE 800 kN
Número de artículo: 135541794
LITTLE USED-MACHINE NOT UNDER POWER-SOLD \ "AS IS \" AT LOW PRICE.
Número de artículo: 135541793
POCO USADO-MÁQUINA NO BAJO EL PODER-VENDIDO "TAL CUAL" A BAJO PRECIO.
Número de artículo: 135466796
WORKING RANGE -DEBURRING MACHINE- design trough vibrator total volume 283 ltr ELECTRICAL SPECIFICATIONS total power consumption 7.5 kW mains power supply 14 kVA mains voltage 460 V mains frequency 60 Hz
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)