sierras usadas para la venta (1,223)

diámetro de corte: 260 mmband longitud: 450 x 40 x 2 mm capacidad 60 grados: cuadrados: 240 mm: 260 x 180 potencia total requerida: 2,0/2,6 kWweight de la máquina aprox. 1,4 tdimensiones: 2,1 x 1,7 x 1,0 m Los datos de este anuncio fueron creados con ModulMWS, la solución de software de LogoTech oHG.

Diámetro de corte: 320 mmband Longitud: 535 x 40 x 2,0 mm Capacidad 90 grados: cuadrados: 300 mm Capacidad 90 grados: plano: mm Velocidad de corte: m/minno. de carreras: 45 - 62 - 90 - 125 Potencia total de buje/mínimo requerida: 3,0 kWweight de la máquina aprox: 0,35 Kgdimensiones: 1,4 x 4 x 1,2 m Sierra hidráulica de arco con:- Sistema de refrigerante - Dispositivo de parada de emergencia Los datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

cutting diameter: 450 mmsaw band length: 6600 x 41 x 1,3 mmtable height: 800 mm: 450 mm: 450 mm: 450 x 270 mmworkpiece weight: 15 - 95 m/min: 7,5 kWwork height max.: 3000 kgconnected load: 3750 x 1400 x 2100 mmControl: NEW PRICE ~ 40.700 EUROvery good conditionSemi-automatic bandsaw, two-column guidedEquipment:- hydraulic vice- infinitely variable cutting speed- chip conveyor- line laser- driven chip brush- coolant device- operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 220 mmcapacity 90 degrees: square: 220 x 220 mmturning speed range:: 20 - 140 m/minsaw band length: 3720 x 34 x 1.1 mmheight of material-table: 825 mmcoolant capacity: 80.0 ltotal power requirement: 2.5 / 3.5 kWweight of the machine ca.: 1500 kgrange L-W-H: 2350 x 2050 x 1500 mm- in checked conditions - machinevideo - https://www.youtube.com/watch?v=joc0EbemYC8Equipment:- electro-hydraulic band saw - FULLY AUTOMATIC- for sawing hollow profiles and solid materials made of steel, stainless steel,. tool steel, non-ferrous metals and plastic- control panel on the front right including button for manual operation (setup/individual cut)- electro-hydraulic material clamping- stepless cutting speed .. 20-140 m/min.- electro-motor chip conveyor- manual adjustment of the material feed range via handwheel including analogue value display- automatic height adjustment of the saw fra ...

Diámetro de corte: 325 mm Longitud de la banda de la sierra: 4200 mm Ancho de corte: 500 mm: 15 - 150 m/min Altura máxima: 750 mm Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Dimensiones de la banda de sierra: 4200 x 34 x 1,1 mm Capacidad 90 grados: redondo: 325 mm Capacidad 90 grados: plano: 500x300 mm: 300 mm: 300 mm: 300x300 mm: 200 mm: 200x200 mm Peso de la máquina aprox. 1250 kg Dimensiones de la máquina aprox. 2250 x 2100 x 1280 mm Los datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

capacity 90 degrees: round: 260 mmcapacity 90 degrees: square: 260 x 260 mmcapacity 90 degrees: flat: 400 x 260 mm: 250 mm: 240 x 240 mm: 240 x 260 mm: 250 mm: 250 x 250 mm: 290 x 250 mmcapacity 60 degrees: round: 160 mmcapacity 60 degrees: square: 160 x 160 mmcapacity 60 degrees: flat: 110 x 260 mm: 190 mm: 190 x 190 mm: 210 x 190 mmdimensions of the machine ca.: 1700x2000x1600 mmweight of the machine ca.: 960 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Número de serie: 1106479 : 400 mitra: JA Refrigeración: JA Los datos de este anuncio fueron creados con ModulMWS, la solución de software de LogoTech oHG.

cutting diameter: 255 mmdimensions of saw-band: 2750 x 27 x 0,9 mmcutting width: 200 x 320 mmcutting speed: 20 bis 80 m/min: 125 mm: 125 x 125 mm: 195 mmImpact energy: 350 mmconnected load frequency: 400 Volttotal power requirement: 1,5 kWweight of the machine ca.: 290 Kgdimensions: 1,1 x 0,8 x 1,75 mDouble miter band saw-Miter cuts up to 60° left and 45° right-Vice with quick clamping device-Band tension control-Electr. Automatic coolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 235 mmdimensions of saw-band: 2645 x 27 x 0,9 mmcutting width: 280 x 190 mmcutting speed: 45/90 m/min: 120 mm: 120 mm: 190 mmImpact energy: 170 mmconnected load frequency: 400 Volttotal power requirement: 1,1 kWweight of the machine ca.: 290 Kgdimensions: 1,2 x 0,8 x 1,2 mDouble miter band saw-Miter cuts up to 60° left and 45° right-Vice with quick clamping device-Band tension control-Electr. Automatic coolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 510 mmcutting diameter: 150 mmcapacity 90 degrees: flat: 450 x 150 mmcapacity 90 degrees: square: 150 mmturning speeds: 29 / 58 m/min.total power requirement: 4,2 kWweight: 1,55 trange L-W-H: 1,8 x 1,7 x 1,7 mmLong-cut cold circular saw, semi-automatic- with miter adjustment left 50°, right 60°- digital cutting angle display- hydraulically adjustable feed speed- hydraulic workpiece clamping- 4 spare saw bladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 110 mmcapacity 90 degrees: flat: 200x88 mmcapacity 45 degrees: round: 115 mmcapacity 45 degrees: square: 110 mmcapacity 45 degrees: square: 150x80 mmtotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,59 tdimensions: 1,9 x 1,4 x 1,8 mHydropneumatic Fully Automatic• Mitering Left/Right• Bevel cuts up to 45° (shifter) a. b.• Pneumatic double clamping device• Pneumatic vertical clamping device• Integrated coolant spray systemMPS control:• Save cutting start/end position• Display of power consumption, piece count, cutting time, etc.• Adjustable water cooling• Cutting pressure regulatorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sawblade width max.: 120 mmWeight: 350 kgMotor output: 1,3 kWWINTER AUTOMATIC BAND SAW GRINDING MACHINE BANDSAWMAX 120 PNK-ABPNK-AB is specially designed for grinding the teeth of various band saw blades used in various forms, width and thickness.Compact and rigid grinding unit moving on linear bearings of PNK-AB machine provides precise and stable grinding.Technical specifications:- Band Saw Width 15-120mm- Tooth pitch Max. 60mm Tooth depth 0-30mm- Tooth forms PV,NV,KV,PU,NU- Hook angle -10° to +30°- Feeding rate 0-90 teeth/min.- Motor quantity 2- Grinding wheel motor – 1.1kW, 1400 r.p.m.- Gearbox motor double-rev. – 0.55kW, 1400 r.p.m- Grinding wheel diameter Ø250mm- Grinding wheel bore diameter Ø20mm- Grinding wheel thickness 8mm/10mm/13mm (depending tooth pitch)- Operating voltage 400V, 3Ph, 50-60Hz- Total power ~1,3kW- Dimensions 80120175cm- Net/gross weight 350/375kgPNK-AB  ...

cutting diameter: 320 mmsaw band length: 3400 x 27 x 0.9 mmcapacity 90 degrees: flat: 320 x 400 mmcapacity 45 degrees: flat: LI 320 x 280 mmcapacity 45 degrees: flat: RE 320 x 260 mmcapacity 60 degrees: flat: RE 320 x 140 mmband speed: 35 + 70 m/minwork height max.: 930 mmvoltage: 400 Vtotal power requirement: 2.67 kWweight: 950 + 250 kgrange L-W-H: - mm well-maintained condition () current new price incl. accessories ~ 40.000 Euro special price on requestEquipment:- electro-hydraulic vertical mitre bandsaw- with large cutting range and small footprint- Robust material support table- miter cuts are carried out fully automatically electro-hydraulic miter adjustment left right- Up to 99 cutting programs- Central operation of all machine functions from the front- Loading also possible from above- Precise positioning thanks to accurate measuring system- electro-hydraulic miter adjustment lef ...

roll diameter: 315 mmthroat: 295 mmworkpiece height: 190 mmMotor Capacity: 0,37/0,8 kWtable-size: 470 x 450 mmsaw band length: 2220 mmcutting speeds: 450 + 900 m/minweight of the machine ca.: 110 kgdimensions of the machine ca.: 640 x 510 x 1600 mmElectric 380 Volt: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 450 mmcutting diameter: 150 mmturning speeds: 6 / 12 / 24 / 48 U/mincapacity 90 degrees: flat: 240 x 70 mmcapacity 60 degrees: flat: 170 x 70 mmcapacity 30 degrees: flat: 120 x 70 mmcapacity 90 degrees: round: 150 mmcapacity 60 degrees: round: 145 mmcapacity 30 degrees: round: 120 mmcapacity 90 degrees: square: 140 x 140 mmcapacity 60 degrees: square: 125 x 125 mm: 100 x 100 mmtotal power requirement: 3,6 kWweight of the machine ca.: 1150 kgdimensions: 1450 x 1610 x 1900 mmSemi-automatic mitre sawEquipment:- miter 30° / 60° / 90°- digital display- roller conveyor- Hydraulic clamping- Hydraulic saw blade feedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: max. 225 mmsaw band length: 2.480 mmwidth of saw-band: 27 mmdimensions of saw-band: 2.480 x 27 x 0,9 mmcutting angle: 0 - 60 °band speed: 20 - 90 m/minCuttingrange 90°: max. 225 mmcapacity 90 degrees: square: 190 mmcapacity 90 degrees: flat: 150 x 245 mmcapacity 60 degrees: round: 90 mmcapacity 60 degrees: square: 90 mmcapacity 60 degrees: flat: 120 x 90 mmcapacity 45 degrees: round: 145 mmcapacity 45 degrees: square: 150 mmcapacity 45 degrees: flat: 190 x 150 mmtotal power requirement: 1,5 kWweight of the machine ca.: 185 kgdimensions of the machine ca.: 1,5 x 1,2 x 1,6 mDocuments: Saw Bands: 1x Coolantsystem: Metal BandsawOPTIMUM - OPTIsaw S 275 PVThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ancho de corte: 3,400 mm Potencia del motor: 2 x 1,1 kWweight de la máquina aprox. 400 kg diámetro de la hoja de la sierra: 330 mm giratoria: -45, 90, +45 : 45, 90 Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Diámetro de corte: 270 mm Velocidad de corte: 20 - 110 m / Ancho de corte min: 270 mm: 750 mm Longitud de la banda: 2835 x 27 x 0,9 mm Requisito total de potencia: kW de la máquina aprox. 0,9 tDimensiones de la máquina aprox: 2,0 x 2,0 x 2,0 m Sierra de cinta automática - alimentación de materiales hasta 750 mm, múltiples avances posibles. - Sistema de refrigerante Los datos para este anuncio se crearon con ModulMWS - la solución de software de LogoTech oHG.

cutting diameter: 450 mmsaw band length: 4150 x 34 x 1.1 mmcapacity 90 degrees: flat: 450 x 480 mmcapacity 45 degrees: flat: LI 450 x 310 mmcapacity 45 degrees: flat: RE 450 x 290 mmband speed: 35 + 70 m/minwork height max.: 930 mmtotal power requirement: 2.35 kWvoltage: 400 Vweight: 950 kgrange L-W-H: 2150 x 1150 x 2115 mm well-maintained condition () current new price incl. accessories ~ 50.000 Euro special price on requestEquipment:- electro-hydraulic vertical mitre bandsaw- with large cutting range and small footprint- Robust material support table- electro-hydraulic mitre adjustment left right Only the saw frame swivels, everything else remains fixed incl. ELGO digital value display- electro-hydraulic material clamping- electro-hydraulic infeed from the saw frame Infinitely adjustable (cutting pressure control)- Operating instructions Special accessories included :- approx. 3.000 mm ...

Dimensiones (L/W/H): 800x800x1350 mmweight: 35 kg consumo total de potencia: 0 kW Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Dimensions (L/W/H): 13000x1700x1700 mmWeight: 1950 kgTotal power requirement: 13,5 / 17,5 kW kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 700x1000x1300 mmWeight: 115 kgTotal power requirement: 0,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 13000x1700x1700 mmWeight: 1650 kgTotal power requirement: 10 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 420 mmcapacity 90 degrees: round: 130 mmcapacity 90 degrees: flat: 160 x 100 mmcapacity 45 degrees: round: 110 mmcapacity 45 degrees: square: 130 x 80 mmturning speeds: 3000 U/minengine output: 2,0 kWtotal power requirement: 2,0 kWweight of the machine ca.: 190 Kgdimensions: 3,0 x 1,0 x 1,3 mUnderfloor aluminum circular saw- Hydropneumatic semi-automatic- pneum. Workpiece clamping deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diámetro de corte: 260 mmCapacidad 90 grados: redondo: 260 mmCapacidad 90 grados: cuadrados: 250 x 400 mmLongitud de la banda: mmAltura de la tabla: mmVelocidad de corte: 20 - 80 m/minControl: konventionell Consumo total de potencia: 2,0 kWpeso de la máquina aprox.: kgDimensiones (LxWxH): 2,0 x 1,4 x 1,2 mSierra de cinta horizontal, semiautomáticaLos datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

diámetro de la hoja de la sierra: 450 mm número de serie: 120317 Doble inglete: 5 metros Länge : documentación: ja peso de la máquina aprox: 1,8 t Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Diámetro de la hoja de sierra: 350 x 2,5 x 32 mm Capacidad 90 grados: cuadrados: 90 x 90 mm Capacidad 90 grados: redondo: 100 mm capacidad 90 grados: plano: 170 x 90 mm Potencia del motor: 1,8 kW Peso aprox. 500 kg Dimensiones: 1200 x 800 x 2000 mm Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

cutting diameter: 220 mmsaw band length: 2480 mmtable height: ca. 910 mmcapacity 90 degrees: flat: 245 x 115 mmcapacity 90 degrees: square: 195 x 195 mmcapacity 45 degrees: round: 150 mmcapacity 45 degrees: square: 140 x 140 mmcapacity 60 degrees: round: 85.0 mmcapacity 60 degrees: square: 85 x 85 mmturning speed range:: 45 + 90 m/mindimensions of saw-band: 2480 x 27 x 0.9 mmclamping width: max. 270 mmtotal power requirement: 0.75 + 1.1 kWweight of the machine ca.: 200 kgdimensions of the machine ca.: 1430 x 720 x 1700 mm New price in 2010 .. 2.400 Euro Special price on requestEquipment:- For cutting profiles, pipes, solid materials made of iron- and non-ferrous materials- The saw arm can be tilted up to 60° for mitre cuts- Infinitely variable lowering via hydraulic lowering cylinder- Torsion-free, heavily dimensioned cast iron saw arm- 2 saw blade speeds for optimum cutting results ( ...