16 GEMINIS máquina utilizada para venda

turning diameter over bed:1450 mm turning diameter over slide rest:1000 mm turning length:8000 mm spindle bore:160 mm turning speed range:2,8 - 560 U/min bed width:850 mm faceplate diameter max.:1400 mm turning diameter in the gap:1800 mm length of gap:600 mm dimensions of the machine ca.:12 x 2 x 2,5 m with Digital Readout 2 fixed steadies dia 1070 mm chip conveyor

control: FAGOR 8055 TC workpiece weight: 10.000 kg handwheel: inkl. Chip coveyor: inkl. centre height: 500 mm greates pass round over bed: 1300 mm Swing diameter face slide: 1000 mm centre distance: 5000 mm travel of cross-slide: 680 mm rapid traverse x + z axis: 8 m/min bed width: 900 mm spindle nose: DIN 55026-11 number of spindle speeds: 0-800 U/min/rpm spindle bore: 104 mm spindle diameter in front bearing: 180 mm turning speed range:: Anzahl 4 main drive: 37 kW Torque: 10.000 Nm : Sauter 300 x 300 diameter of quill: 180 mm quill stroke: 300 mm Height: BIS ZUR FLACHFÜHRUNG 805 mm total power requirement: 45 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: m Equipment -4-jaw faceplate (independent jaws) Ø 800 mm -3-jaw faceplate (independent jaws) Ø 400 mm -Steady rest (4-point support) Ø 750 mm -Chuck guard -Full rear enclosure The data for this ad was ...

turning diameter: 1.300 mm turning length: 3.000 mm control: FAGOR 8055 TC/C swing diameter over slide transversal: 940 mm feeds: X /Z 8.000 mm/min c-axis: Inkl. speeds:: 0 - 800 u/min transmission ratio: 4 spindle nose: DIN-55026-B11 : 46 kw spindle passage: 104 mm max. workpiece weight between centres: 13.000 kg chip conveyor: Inkl. total power requirement: 50 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 7.925 x 2980 x 2585 m Turret positions 8 Turret type VDI 50 (Ø 470 mm) Driven tool power 5.5 kW Tailstock Tailstock quill diameter 180 mm Tailstock quill stroke 300 mm Additional equipment 3-jaw universal chuck Ø 900 mm 3-point steady rest Ø 750 mm 3-point steady rest Ø 400 mm 2 axial driven tool holders 1 radial driven tool holder 20 VDI 50 tool holders Air-conditioning unit for electrical cabinet Portable handwheel High-pressure coolant  ...

turning diameter over bed: 1450 mm turning diameter over slide rest: 1000 mm turning length: 8000 mm spindle bore: 160 mm turning speeds: 2,8-560 U/min faceplate: 1400 mm 3-jaw chuck: mm bed width: 850 mm turning diameter in the gap: 1800 mm length of gap: 600 mm steady: 1070 mm steady: 1070 mm steady: 650 mm Rapid travel: chip conveyor: kW digital readout: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Multifix steel holder with inserts The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business ...

turning diameter: 870 mm turning length: 3000 mm control: Siemens type: 810 mm bed width: 620 mm turning diameter over slide: 560 mm 3 jaw chuck Forckrath: 630 mm type: 3KTN 630 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software ...

Horizontal turning machine manufactured in 2014. This Geminis GT5 G2-1000x2000 features a maximum swing over bed of 1000 mm and a spindle speed of up to 1400 rpm. It also has a distance between centers of 2000 mm and a main spindle hole diameter of 104 mm. If you are looking to get high-quality turning capabilities, consider the Geminis GT5 G2-1000x2000 machine we have for sale. Contact us for further details.

turning diameter: 720 mm turning length: 3.000 mm control: FAGOR 8055 TC/B turning diameter over bed: 470 mm spindle bore: 92 mm spindle nose: DIN-55027-11 spindle diameter: 150 mm spindle drive: 17 / 20,5 kW total power requirement: 28 kW weight of the machine ca.: 5,7 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fabricante GEMINI Modelo GHT 6 G2 1.300 x 3.000 Ano 2007 CNC FAGOR 8055 TC/C Capacidades Máximo a rodar na cama 1.300 mm. Diâmetro máximo da plataforma giratória: 1.300 mm. Max. Ligar a Carro Transversal 940 mm. Distância entre os pontos 3.000 mm. Eixos Avanço rápido no eixo X, Z 8 m/min Eixo C e ferramentas motorizadas INCLUÍDAS Cabeça Velocidade 0-800 rpm Não. de alcances automáticos 4 Potência do motor principal 46 kW Tipo de nariz DIN-55026-B11 Passo da haste da cabeça 104 mm. Torre Posições das Torres 8 Torre tipo VDI 50 (470 mm) Potência das ferramentas motorizadas 5,5 kW Contraponto Diâmetro da haste do contraponto 180 mm Curso do eixo do contraponto 300 mm Equipamento adicional Placa universal de 3 mandíbulas 900 mm. INCLUÍDA Moldura de 3 pontos 750 mm INCLUÍDA Bezel de 3 Pontos 400 mm INCLUÍDO 2 unidades. Suporte de f ...

Fabricante GEMINI Modelo GHT-4 720 x 3000 Ano 1999 CNC FAGOR 8055 TC/B Capacidades Max a virar-se. Na bancada/carruagem 720 / 470 mm. Altura do ponto a partir do guia 366 mm. Distância entre os pontos 3.000 mm. Progresso Avanço Rápido do Eixo (X/Z) 8.000 mm/min Avanço do eixo (X/Z) 8.000 mm/min Cabeça Diâmetro do furo principal do eixo 92 mm. Cabeça do Nariz DIN-55027-11 Diâmetro do eixo no rolamento dianteiro 150 mm. Rotações da cabeça 0-1600 Não. de faixas de cabeças automáticas 2 Potência do motor principal 17 / 20,5 kW Motor principal de binário máximo 1590 / 1920 Nm Contraponto Avanço do contraponto com diâmetro de 100 mm Curso da haste do ponto de cauda 200 mm Alojamento da vara de Morse 6 Banco Largura 430 mm. Altura até à guia plana 775 mm. Torre Tipo torre Duplomatic VDI 40 Não. Torre de posições motorizadas 8 Equipament ...

This Geminis GHT-4 720 x 3000 was manufactured in 1999. It features a maximum swing over bed of 720 mm and a distance between centres of 3000 mm. The main spindle supports a speed up to 1600 rpm with a power of 17/20.5 kW. It includes a Duplomatic turret with 8 tool positions and a longitudinal chip conveyor. Consider the opportunity to buy this Geminis GHT-4 720 x 3000 horizontal turning machine. Contact us for further details regarding this machine.

Geminis GE870 torno usado. Distância entre centros: 2.000mm. Balanço: 870mm. Baloiço na carruagem: 580mm. Oscilação na folga: 1.100mm. Tubagem: 82mm. 18 velocidades (16-1250rpm) Equipado com chuck universal. Equipado com 4 mandíbulas chuck. Equipado com descanso constante Equipado com acompanhamento descanso constante. CE para máquinas europeias usadas.

Lathe Geminis GE650S paralela a reconstruir. Distância entre pontos: 1000mm. Vire no banco: 680mm. Vire o carrinho: 410mm. Vire o decote: 850mm. Buraco principal: 84mm. Carrinho motorizado e charriot. Velocidades: 18 (13-1000rpm). Motor principal: 15cv. Proteções de chapas e carrinhos e certificado CE RD1215/97. Placa de mudança rápida e torre.

engine lathe, year 2007, CNC 8055 TC. Used machine. More info & price on IndustrialBuyer.

- Full C-Axis 360.000 - Driven tools Axiaal & Radial  - Driven tailstock -  Steady rest C-Type - Front chuck with 180 bore - Rear chuck with 180 bore - 3 guide way bed width 750 mm

Key data: 870 mm, 3000 mm

Comprimento de giro: 3000 mm Diâmetro de giro: 870 mm acima da cama 560 mm sobre deslizamento transversal Peso entre pontas: 3.600 kg sem luneta 4.400 kg com 1 luneta 5.600 kg com 2 lunetas Velocidade do eixo: 0 - 900 rpm Furo do eixo: 162 mm Controle: Fagor Equipado com: - Mandíbula extra na parte traseira do eixo principal - 1 luneta fixa 420 mm - 1 luneta rotativa - Mandril de 4 mandíbulas 800 mm - Mandril de 3 mandíbulas 400 mm - 10 contentores de ferramentas - Refrigerante e recipiente de cavacos na parte traseira - Documentos da máquina País de origem: Espanha Potência do motor: 30 kW Peso da máquina: 9.000 kg Máquina CxLxA: 5.1 x 2.4 x 2.0 mtr.

turning diameter: 880 mm turning length: 6000 mm swing diameter over bed slide: 540 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: Geminis Type: GE870 Distance between centers: 6.000 mm Centre height: 440 mm Swing over bed: 880 mm ø Swing over support: 540 mm ø Swing in the gap: 1.100 mm ø Spindle boring: 85 mm ø Steadys: 400 mm ø + 600 mm ø 3 jaw chuck Digital read-out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.