5 GM GERA maquina usada para la venta

Overview   This ARCADE GEL 6 bottle washer was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and must be replaced due to an increase in performance.   Technical details   Nominal output: 33,000 bph   Control range: 13,200 - 36,300 bph   Chain pitch: 169 mm   Cell pitch: 110 mm   Bottle cells per row: 30 pieces   Total bottle cells: 7,860 pieces   Bottle cells, loaded: 7,680 pieces   Consumption  Compressed air: 1m³   Steam (operation): 489 kg/ h   Steam (heating): 4,430 kg/ h   Electrical power: 48.4 kW   Water: 7.35 m³/ h   Bath volume   Pre-soak: 2,263 l   Pre-caustic: 7,240 l   Caustic 1: 31,755 l   Caustic 2: 350 l   Hot water 1: 350 l  Hot water 2: 350 l   Cold water: 350 l 

A washing machine for cleaning glass bottles prior to beverage filling. The soiled empty bottles are loaded into bottle baskets and pass through the system for approximately 14 minutes. First, the bottles pass through a pre-soaking bath and a lye bath in the lower section, and are then rinsed in the upper section with lye, twice with hot water, cold water and finally fresh water. The cleaned bottles are discharged onto the bottle conveyor above the bottle inlet., Additional title: single-ended machine for cleaning glass bottles, Operating hours: 5259, Nominal capacity: 33000 Fl/h ; mechanical control range: 13.200 - 36.000 Fl/h, Number of basket holders: 269 pcs. ; of which 259 were filled – total number of bottles: 7.770 pcs., Processing time: 14,14 min, Heating / Cooling: 1.352.712 kJ/h, Water: 7,92 m³/h, Formats: 0,5 l NRW bottles, Material: housing from stainless steel, Position:  ...

Máquina de limpiar, Fabr. GM Gera, tipo: Arcade GEK2.1RV1, para 4.000 bph, 9 b/row, con botella NRW de 0,5 lt, paso de la celda 95mm, con pre-remojo, baño cáustico 1+2, baño de agua caliente 1+2, pulverización de agua fría y agua dulce, año 2007

Máquina de limpiar, Fabr. GM Gera, Tipo: Arcade, para 24.000 bph, rango de control 7.600 - 26.400 bph, 25 bph, paso de la jaula 95mm, paso de cadena 140mm, con control Siemens S7

Un sistema de limpieza de botellas GM Gera está disponible. Capacidad de producción con botellas de PET de 1 l: 13000 botellas/h, celdas de botellas: 3240 piezas, celdas por fila de canasta: 18, paso de celda: 110 mm, paso de cadena: 169 mm, tiempo total de tratamiento: aprox. 15 min, tiempo total de inmersión: aprox. 7,5 min, material de la carcasa: acero inoxidable (SST). Dimensiones del sistema X/Y/Z: aprox. 8900 mm/4200 mm/3350 mm, peso: aprox. 23650 kg, horas de funcionamiento (09.2025): aprox. 14300 h. Documentación disponible. Es posible realizar una inspección in situ. Se espera que esté disponible a partir de mediados de marzo de 2026.