86 HBM máquina utilizada para venda

corrente de soldadura: 20 - 60 A capacidade de corte: 1 - 20 mm tensão de circuito aberto: 104 V Pressão de ar necessária: carga mínima de 4 bar ligada: 7,9 kW Frequência de carga ligada: 400 V peso: 16 kg Dimensões (CxLxA): 480 x 260 x 360 mm Visor digital. Proteção contra surtos. Tocha de plasma. Cabo de terra. Válvula redutora com separador de humidade. Equipado com tecnologia IGBT Fornecido sem ficha CEE.

range L-W-H: 790 x 460 x 960 mm weight: 70 kg : 7 St. Tool trolley with 7 drawers equipped with tools - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - Drawer 1 1/4 premium ratchet. 1/4 knee joint 45 mm. 1/4 extension 100mm. 1/4 socket wrench 4, 4.5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm. 1/4 long buttons 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 mm. 3/8 premium ratchet. 3/8 knee joint 55 mm. 3/8 extension 150mm. 3/8 socket wrench 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm. 3/8 long socket wrenches 10, 11, 12, 13, 14, 15, 17, 19 mm. 1/2 premium ratchet. 1/2 knee joint 75 mm. 1/2 extension 125mm. 1/2 Sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 22, 24, 27, 30, 32mm. 1/2 Long Sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22mm. - DRAWER 2 Ring, ratchet and socket wrench set consisting of. Sockets 8, 9, 10, 11, 12, 14, 15, 16, 17, 19, 21, 22 ...

cutting diameter: 355 mm dimensions of saw-band: 3770 x 34 x 1,1 mm cutting speed: 20 - 80 m/min cutting width: 490 x 280 mm : 290 mm Impact energy: 250 mm : 230 mm : 180 mm connected load frequency: 400 Volt total power requirement: 2,2 kW weight of the machine ca.: 0,7 t dimensions: 1,43 x 0,72 x 1,7 m Semi-automatic miter band saw - Miter cuts up to 45° left + right - Miter cuts up to 60° right - Vice with quick release device - Tape tension control via manometer - Electr. automatic cooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 25 mm throat: 175 mm bore stroke: 50 mm : 16 mm spindle taper: ISO 30 spindle turning speed range: 50 - 3000 U/min : 380 mm : 175 mm table surface area: 700 x 180 mm connected load frequency: 230 V max. distance between table and spindle-nose: max. 320 mm total power requirement: 0,75 kW weight of the machine ca.: 150 Kg dimensions of the machine ca.: 670 x 550 x 910 m Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right switch Pan head left/right 90° spindle protection. incl. tool box with various tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 30 mm throat: 200 mm bore stroke: 70 mm : 16 mm spindle taper: MK3 spindle turning speed range: 50 - 3000 U/min : 565 mm : 220 mm table surface area: 840 x 210 mm connected load frequency: 400 V max. distance between table and spindle-nose: max. 470 mm total power requirement: 1,1 kW weight of the machine ca.: 230 Kg dimensions of the machine ca.: 0,75 x 1,05 x 1,3 m Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right switch Pan head left/right 90° Recording MC 3 - B16. Drill chuck 3 - 16 mm. spindle protection. Machine stand. incl. tool box with various tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Largura do material: 300 mm espessura do material: 2,0 mm : máx. 90 Grad peso: 12 Kg dimensões: 400 x 250 x 100 m Máquina de trabalho combinado de chapa metálica com: - Flexão, largura da ferramenta 25 - 50 - 75 - 75 - 105 mm. - Rolos, diâmetro de rolo 38 mm - tesouras, máx. 1015 x 1mm

saw-blade dia.: 210 mm Cutting height: 70 x 305 mm Cutting height at 45°: 35 x 305 mm saw blade turning speeds: 4500 U/min Motor output: 1,5 kW machine weight ab.: 9 kg Dimensions (L/W/H): 340 x 500 x 740 mm Cross-cut saw The machine is equipped with many adjustment options and tools to support and secure the workpiece to be cut. A line laser indicates where the cut should be made. The protective cover folds away automatically. Delivery including: saw blade (installed) 6mm allen key anthers 2x side supports The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

largura das tiras: 100 mm de comprimento da banda: 915 mm dimensões da roda de moagem: 100 x 915 mm quadro de trabalho:: 225 x 155 mm total de potência: 0,44 kW peso da máquina ca.: 0,018 t dimensões da máquina ca.: 0,56 x 0,26 x 0,3 m

Comprimento da tabela: largura da mesa de 910 mm : 500 mm altura da mesa: 350 - 1300 mm de peso máximo.

bore capacity in steel (diameter): 35 mm throat: 230 mm bore stroke: 125 mm spindle taper: ISO 40 spindle turning speed range: 115 - 1750 U/min : 560 mm : 175 mm table surface area: 1000 x 240 mm max. distance between table and spindle-nose: 375 mm connected load frequency: 400 V total power requirement: 0,85/1,5 kW weight of the machine ca.: 0,95 t dimensions of the machine ca.: 1,3 x 1,2 x 2,1 m Domestic equipments: automatic feed and handwheel. Drill chuck with MK4 holder Digital depth display Left / right switch. Emergency stop switch Pivot head swiveling Spindle protection. Small toolbox Machine base and X-axis feed optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw-blade dia.: 305 mm Cutting height: 105 x 340 mm Cutting height at 45°: 60 x 340 mm saw blade turning speeds: 5000 U/min Motor output: 2,0 kW machine weight ab.: 25 kg Dimensions (L/W/H): 700 x 570 x 980 mm Cross-cut saw The machine is equipped with many adjustment options and tools to support and secure the workpiece to be cut. A line laser indicates where the cut should be made. The protective cover folds away automatically. Delivery including: saw blade (installed) 6mm allen key anthers 2x side supports The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

largura das tiras: comprimento banda de 100 mm: 1220 mm velocidade da banda: 1140 m/min. : 0,62 x 0,4 x 0,35 cm potência máxima: 1,5 kW pelho da máquina ca.: 0,04 t dimensionais: 0,97 x 0,67 x 0,37 m

Gama L-W-H: 1045 x 5050 x 1010 mm peso: 100 kg : 7 Carrinho st. Tool cheio de: 3 pcs. Conjuntos de tomadas diferentes, chave de fendas de dupla extremidade Tovel de chaves de anel, chaves, alicates diferentes, Scretas, chave de fendas Allen, ficheiros, hammersSaw, etc. Aço da ferramenta: Chrome Vanadium 5 pcs. Gavetas cheias de ferramentas 2 pcs. Gavetas vazias

weight max. in kg: 800/400 kg stroke: 6/12 mm stroke speed: 5/8 m/min output: 1,25 kw connected load frequency: 230 V weight: 21 kg dimensions: 420 x 180 x 280 mm Due to the low installation height, the maximum lifting height remains available. Control with emergency stop. (required by law) Suspension with safety hook. Overload protection with slip clutch. Built-in limit switch. Collection bag for chain. Control console with 1.6 m cable. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 320 mm turning diameter over slide rest: 220 mm turning length: 600 mm turning diameter in the gap: 320 mm turning speeds: 60 - 1650 U/min centre height: 160 mm spindle bore: 38 mm tailstock quill taper MT: 3 MK connected load frequency: 400 V total power requirement: 1,1 kW weight of the machine ca.: 340 Kg dimensions of the machine ca.: 1,4 x 0,75 x 0,7 m Center lathe with: 3-jaw chuck 160 mm. 4-jaw chuck 200 mm. Faceplate 200mm Fixed bezel Continuous bezel 4-way steel holder. Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Longitudinal and cross feed Complete coolant system Forage protection Set of change gears Machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

comprimento da tabela: 820 mm largura da mesa: 520 mm de altura do curso: 730 mm peso máximo. em kg: 300 kg : 260 mm de peso da máquina ca.: 0,065 t dimensões da máquina ca.: 1,0 x 0,6 x 0,82 m

largura das tiras: comprimento 150 mm: 2000 mm band velocidade: 33 m/seg total de potência: 4 kW peso da máquina ca.: 100 t dimensionais da máquina ca.: 1,2 x 0,5 x 0,85 m

range L-W-H: 780 x 480 x 1050 mm weight: 79,5 kg : 6 St. The tool trolley is equipped with 6 storage drawers. The tool trolley is equipped with 2 normal and 2 swivel wheels, one of them with a brake. The tool trolley is fully lockable thanks to an integrated lock. Drawers can be locked per drawer. All drawers are equipped with a quick release and a cushioning fitted. Height-adjustable storage compartment behind the door. Central locking with 2 keys. Tool trolley is equipped with 155 pieces of tool parts: 3 pcs. Socket sets: 1/4 , 3/8, 1/2 . Ratchet ring spanner set from 6 - 22mm, Extension for socket sets, different allen keys from 1 - 10mm, Various screwdriver sets. Pliers assortment. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

range L-W-H: 780x480x105 mm weight: 79,5 kg : 7 St. Tool trolley filled with: 3 pcs. Different socket sets, double end wrench, Double ended ring spanners, wrenches, pliers different, Screwdrivers, Allen screwdrivers, files, hammersSaw, etc. Tool Steel: Chrome Vanadium 5 pcs. Drawers filled with tools 2 pcs. Drawers empty The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

range L-W-H: 745 x 525 x 915 mm weight: 93,5 kg : 7 St. Tool trolley filled with: 3 pcs. Different socket sets, double end wrench, Double ended ring spanners, wrenches, pliers different, Screwdrivers, Allen screwdrivers, files, hammersSaw, etc. Tool Steel: Chrome Vanadium 5 pcs. Drawers filled with tools 2 pcs. Drawers empty The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 8 bar Effective free air delivery: 120/85 L/min Receiver capacity: 30 Liter weight of the machine ca.: 50 kg. Number of cylinders: 2 0 motor: 230V / 0,75KW V / KW range L-W-H: 570 x 640 x 800 mm Quiet professional 30 liter compressor Noise level approx. 40 - 45 DB (A) This compressor is delivered as standard with: Safety valve, pressure reducing valve, pressure gauge, coupling and Drain valve at the bottom. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 16 mm throat: 170 mm bore stroke: 50 mm : 16 mm spindle taper: MK2 spindle turning speed range: 50 - 2250 U/min : 320 mm : 145 mm table surface area: 500 x 140 mm connected load frequency: 230 V total power requirement: 0,5 kW weight of the machine ca.: 90 Kg dimensions of the machine ca.: 0,5 x 0,45 x 0,84 m Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content but without digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gama de moagem: ângulo 20 mm de canto min./máx.: 90 - 135 Carga grad connected: 230 V pes de peso da máquina ca.: 8,6 Kg dimensionais da máquina ca.: 0,35 x 0,2 x 0,2 m

largura das tiras: comprimento banda de 100 mm: 915 mm dimensionais da roda de moagem: 200 mm caminha:: 170x125 / 265x150 mm Requisito de potência máxima se de 0,5 kW da máquina ca.: 26 Kg dimensionais da máquina ca.: 0,6 x 0,5 x 0,3 m

range L-W-H: 780x480x105 mm weight: 79,5 kg : 7 St. Tool trolley filled with: 3 pcs. Different socket sets, double end wrench, Double ended ring spanners, wrenches, pliers different, Screwdrivers, Allen screwdrivers, files, hammersSaw, etc. Tool Steel: Chrome Vanadium 5 pcs. Drawers filled with tools 2 pcs. Drawers empty The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 680 x 450 x 430 mm pressão de funcionamento: 3 - 6 bar Consumo de ar: 250 l/min. peso da máquina ca.: 28 Kg : 0,76 x 0,5 x ,75 cm