Centros de processamento universal (70)

CNC Bar Machining Center for Aluminum, Machine No. 6100013187, control Beckhoff C6140 renewed in 2020, infeed of extrusion profile magazine length max. approx. 6000 mm, machining units (drilling / milling: vertical top 1 piece / vertical bottom 4 pieces / horizontal front 1 piece / horizontal rear 1 piece) and (sawing 3 pieces: 45 / 90 / 45 degrees), outfeed belt max. approx. 2700 mm, chip conveyor belt (The article is in condition as existing and unchecked. The article is sold from the foundation and without content/material! For the dismantling and loading of the item, there are no pallets, other packaging material available on site and the buyer must rent a forklift, tank rollers, machine jacks, etc. at his own expense if necessary! Mediation of dismantling and loading possible. Contact: Dejan Ducic / dejan.ducic@surplex.com Auction-ID: A7-45878-14

x-travel: 500 mmy-travel: 450 mmz-travel: 400 mmControl: SIEMENS 840D table - swivable +/-: +110 / -5 °-C-axis table rotating: 360° tool piece magazine with: 16 Werkzeugplätzen weight of the machine ca.: 3.9 tdimensions of the machine ca.: 2.9 x 2.0 x 2.5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mmy-travel: 700 mmz-travel: 550 mmControl: Heidenhain TNC 530 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2800 mmy-travel: 2200 mmz-travel: 800 mmControl: Heidenhain iTNC 530 table surface area: 3000 x 1200 mmtool taper: HSK-A-63 spindle turning speed range: 12000 U/minpower capacity: 18 kWfeed range: 35000 mm/mintotal power requirement: 68,7 kWweight of the machine ca.: tdimensions of the machine ca.: 12,4 x 3,5 x 4,6 mThe FPT DINO is a 5-axis portal milling machine designed for the precise machining of large components.With a cross travel of 2200 mm and a high-speed spindle with 12,000 rpm, this machine combines high machining volume with outstanding dynamics in finishing.Heidenhain iTNC 530 CNC path controlNumber of controlled axes (simultaneously): X/Y/Z/C/BTravels:X-axis (longitudinal travel) 2800 mmY-axis (cross travel) 2200 mmZ-axis (vertical travel) 800 mmMachine length: 12,434 mmMachine width: 3,597 mmMachine height: 4,622 mmCoolant equipment (no coolant through spindle)C ...

CONTROLS  CNC controls HEIDENHAIN MILL PLUS WORKING RANGE -CUBIC-  number of processing axes (excl parallel axes): 5   X-axis travel: 500 mm  Y-axis travel: 420 mm  Z-axis travel: 380 mmSPINDLE / HEAD  spindle revolutions (max): 18000 /min  tool fixture: HSK A63 AXIS DRIVES  feed velocity (max): 20000 mm/min  rapid traverse: 50000 mm/minTOOL MAGAZINE  number of positions: 60 ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 2500 mm  space requirements -front/back-: 2600 mm  total height: 2440 mm  total weight approx.: 6000 kgATTACHMENTS  zero-point workholding system: yes   chip conveyor: yes   coolant unit: yes    ...

x-travel: 800 mmy-travel: 700 mmz-travel: 600 mmturning speeds: 12000 1 U/min: control: Heidenhain total power requirement: 59 kWweight of the machine ca.: 10,6 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CONTROLS  CNC controls HEIDENHAIN ITNC 530 WORKING RANGE -CUBIC-  number of processing axes (excl parallel axes): 5   X-axis travel: 600 mm  Y-axis travel: 450 mm  Z-axis travel: 450 mm  rotating range B-axis from: -115 °  rotating range B-axis up to: 30 °  rotating range C-axis from: 0 °  rotating range C-axis up to: 360 °TABLE  clamping surface diameter: 450 mm  workpiece load (max): 200 kgSPINDLE / HEAD  spindle revolutions (max): 20000 /minAXIS DRIVES  rapid traverse X: 22000 mm/minTOOL MAGAZINE  number of positions: 220 ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 4400 mm  space requirements -front/back-: ...

x-travel: 800 mmy-travel: 800 mmz-travel: 800 mmcontrol: SIN840D spindle turning speed - stepless: 5 - 10.000 U/minpower capacity at 40 % load: 38,00 KWpower capacity at 100 % load: 25,00 kWmax. torque at 40% / 100% load: 288 / 187 kWspindle diameter in front bearing: mmspindle taper: HSK 100 feed X/Y/Z/-axis: 0 - 60.000 mm/minrapid traverse X/Y/Z: 60,00 m/minfeed capacity X/Y/Z: 12,00 kNB - axis: 180 x 0,001 °rapid travel B-axis: 10,00 U/minsize of pallet: 800 x 630 mmtable load: 0,80 tC-axis: 360 x 0,001 °rotary table speeds infinitely variable: 1 - 800 U/minpower capacity - table: 13,85 kWmax. torque on the faceplate: 1.550 Nmtoolpiece magazine: chain magazine: 60 Stücktool diameter: 110 mmwotkpiece diameter with 2 vacant positions: 230 mmtool length - max.: 450 mmweight of tools max.: 30,00 kgtotal power requirement: 80,00 kWweight of the machine ca.: 18,00 tdimensions of the mac ...

x-travel: 800 mmy-travel: 600 mmz-travel: 500 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3.000 mmy-travel: 1.000 mmz-travel: 860 mmControl: Heidenhain iTNC-530 table-size: 3.600 x 1.050 mmT-slots: 7 x 18 T - slots distance: 125 mmdistance table - lower edge spindle: 25-366 mmtable weight: 4.200 Kgb-axis: +-105 °c-axis: +-360 0rapid travel x/y/z: 30.000 mm/minrotary table: Durchm. 1.000 mmmax. turning diameter: 1.400 mmnumber of spindle speeds: 9.000 U/min/rpmtool taper: ISO-50 DIN 69871-AD spindle drive: 28,5 kWmax. torque on the spindle: 240 Nmtool change unit: AITEK, 40 fach: 20 handwheel: Ink. Shuttle operation: Inkl Chip coveyor: Ink. Internal cooling system: 20 bartotal power requirement: 65 kWweight of the machine ca.: 24,8 tdimensions of the machine ca.: 8.056 x 5.496 x 3.790 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1.000 mmy-travel: 1.000 mmz-travel: 1.000 mmControl: SINUMERIK 840D pl spindle turning speed - stepless: U/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m5-axis machining center with SIEMENS SINUMERIK 840D pl control, electron. handwheel, NC swivel rotary table Ø1,000mm, coolant through the spindle, chip conveyor, 180-fold tool-magazine HSK100,The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: HEIDENHAIN iTNC-530 for axes: 5 x-travel: 712 mmy-travel: 508 mmz-travel: 515 mm-A-axis table swivelling: +30/-120 °-C-axis table rotating: 360 °rotary table dia.: 330 mmno. of tools in magazin: 60 max. tool diameter: 88 mmmax. tool-dia with free toolbox: 125 mmmax. tool length: 280 mmmax. tool weight: 7 kgspindle taper: SK40 Big Plus spindle turning speed range: -15000 U/minpower capacity - milling spindle: 25 kWweight of the machine ca.: 12.8 tdimensions of the machine ca.: 303x395x367 cm3D measuring tracer: RENISHAW Zero point clamping system:: LANG TECHNIK Coolant through spindle: pressure: 20 barThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: HEIDENHAIN TNC-430 x-travel: 800 mmy-travel: 600 mmz-travel: 500 mmB-axis (table): 280 mmtable swivelabel +/-: 220 (+/-110) °-C-axis table rotating: 360 °tool magazin:: 30 spindle taper: HSK63 spindle turning speed - stepless: -15000 U/minrapid traverse feeds rotary table: 36 U/minrapid travel x/y/z: 36 m/minOverall size: 3800X3600X3000 mmweight of the machine ca.: 8.5 tCoolant through spindle: pressure: 40 Bar3D measuring tracer: RENISHAW Chip conveyor: Coolant installation: SIEMENS 840Dwww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: HEIDENHAIN iTNC-530 x-travel: 885 mmy-travel: 800 mmz-travel: 520 mmB-axis (table): +30/-120 °c-axis: 360 °table-size: 600x500 mmtool magazin:: 60 spindle taper ISO: 40 Big Plusspindle turning speed - stepless: 15000 U/mintotal power requirement: 25 kWrapid travel x/y/z: 36 mm/minrapid traverse (slewing motion): 60 U/minrapid traverse feeds rotary table: 100 U/mindimensions of the machine ca.: 3.8x3.6x3.0 mweight of the machine ca.: 12,1 tCoolant through spindle: pressure: 20 bar3D measuring tracer: RENISHAW Chip conveyor: Coolant installation: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

curso x: 762 mmy-curso: 508 mmz-curso: 508 mmEixo B (tabela): +120/-35 Gradc-eixo: 360 Gradcontrole: HAAS für 5 Achsenrevista de ferramentas com: 40 Plätzennúmero de velocidades do eixo: 12000 U/mindimensões da máquina ca.: 4,3 x 2,35 x 2,8 mpeso da máquina ca.: 8,5 t

x-travel: 550 mmy-travel: 410 mmz-travel: 450 mmb-axis: +110/-110 °spindle turning speed range: -15000 U/minspindle taper: BT Big Plus 40 tool change unit: 40x size of pallet: 2x D-250 mmweight of the machine ca.: 8.6 t5 axes machining centerFANUC G-Tech 30iCoolant through spindle3D measuring probeTool measuring deviceMisc palletsMisc tool holdersMore details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 450 mmz-travel: 400 mmControl: HEIDENHAIN iTNC 530 Table dimensions: 500 x 380 mmtable weight: 500 Kgc-axis: 0.001º ( ± 360º) 0b-axis: 180 °rapid traverse X-axis: 80 m/minfeeds: 50 m/minspindle turning speed range: 18.000 U/minspindle taper: BT- 40 spindle drive: 30 kWInternal cooling system: 40 barhandwheel: HEIDENHAIN HR-410 total power requirement: 50 kVAweight of the machine ca.: 6,5 tdimensions of the machine ca.: mChip conveyor: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

curso x: 762 mmy-curso: 508 mmz-curso: 508 mmEixo B (tabela): +120/-35 Gradc-eixo: 360 Gradcontrole: HAAS für 5 Achsenrevista de ferramentas com: 40 Plätzennúmero de velocidades do eixo: 12000 U/mindimensões da máquina ca.: 4,3 x 2,35 x 2,8 mpeso da máquina ca.: 8,5 t

curso x: 1600 mmy-curso: 900 mmz-curso: 800 mmControle: Heidenhein iTNC tamanho da mesa: 1700x850 mmcone ISO: ISO 40 velocidades de giro: 10000 U/minpeça de trabalho: Aleatório 30 pos. peso da mesa: 2000 Kgde passagem rápida:: 20 m/minSistema de arrefecimento interno: 20 barnecessidade de potência total: 18 kWpeso da máquina ca.: 18600 kgdimensões da máquina ca.: m

x-travel: 630 mmy-travel: 560 mmz-travel: 560 mmControl: Heidenhain TNC 430 total power requirement: 26 kWweight of the machine ca.: 6500 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.