fresadoras usadas para venda (2,492)

x-travel: 480/500 mmy-travel: 230/250 mmz-travel: 380/400 mmspeeds: 45 - 2240 U/mintable surface area: 1000 x 250 mmtool taper: SK 40 control: HEIDENHAIN TNC 124 total power requirement: 3 kWweight of the machine ca.: 1550 kgdimensions of the machine ca.: 2600 x 2200 x 1800 mm- horizontal + vertical milling spindle- Cooling device- swiveling table- Chip tray- Feed X/Y/Z - axis infinitely adjustable 8-1680 mm/min- Rapid traverse X/Y/Z - axis 4000 mm/min- Control HEIDENHAIN TNC 124- Operating hours: 4764 hours- Machine light- Machine feet- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mmy-travel: 150 mmz-travel: 340 mmtable-size: 600x260 mmspindle taper ISO: 40 spindle turning speed range: 40-2000 U/minweight of the machine ca.: 700 kgVisit us on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 300 mmz-travel: 400 mmtotal power requirement: 3 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 222 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmtotal power requirement: 3 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 2 x 2 x 2 mNo. 2392Universal tool milling machineHERMLE UWF 801Working area: 500 x 430 x 400 mmDrive: 3 kWControl: TNC 135With manual control: Working area 520 x 450 x 410 mm,fixed table 800 x 400 mmTool holder SK 4018 spindle speeds from 40 - 2000 1/minFeed stepless x,y 4 - 1600 mm/minz 4 - 1000 mm/minDimensions 2.3 x 2.3 x 1.7 mWeight 1350 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mmy-travel: 300 mmz-travel: 400 mmtotal power requirement: 3 kWweight of the machine ca.: 2,5 tdimensions of the machine ca.: 2,52,52 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mmy-travel: 160 mmz-travel: 290 mmtable surface area: 210 x 600 mmtool taper: SK 40 spindle turning speed range: (16) 40 - 2000 U/minfeeds -stepless-: 5 - 500 mm/minrapid traverse: 1,2 m/minspindle motor: 1,5 / 1,9 kWtotal power requirement: 9,5 kVAweight of the machine ca.: 730 kgdimensions of the machine ca.: 2000 x 2200 x 1655 mmThe machine comes from a training center.Equipment:3-axis active digital readout made by HeidenhainFixed angle tableCoolant equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 350 mmz-travel: 375 mmdigital readout: AKTIV - Digitalanzeige turning speed range: 63 - 4000 U/minspindle taper ISO: 40 table surface area: 800 360 mmtotal power requirement: 3 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2 2 2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-axis: 4000 mmy-axis: 3200 mmz-axis: 1200 mmdistance between columns: 2700 mmspindle motor: 50 / 65 kWspindle turning speed range: 15000 U/mindistance spindle nose and table: 200 - 1400 mmrapid traverse: m/mintable-size: 4020 x 2400 mmworkpiece weight: 15 tControl: Heidenhain TNC 640 total power requirement: - kWweight of the machine ca.: 44 tdimensions of the machine ca.: - mMachine equipped with:X, Y, Z, B, C five axes simultaneous movement control- CNC control Heidenhain TNC 640- 40-position tool changer (HSK-A100)- 2-axis milling head TCH-19F-- B- & C-Axis- X,Y,Z-axis linear scales- IKZ 20bar- Tool off-set- Oil skimmer- Chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: - mmx-travel: 1250 mmy-travel: 630 mmControl: Heidenhain TNC 426 / 430 total power requirement: 48 kWweight of the machine ca.: 12 tdimensions of the machine ca.: ca. 5 x 6 x 4 m mCNC jig boring machine / vertical machining centreoverhauled in 2000Spindle ISO 50,speed range 30-3000 min-1max. torque 522 Nmfeeds 3-2000 mm, rapid traverse 10 m/minmax. distance spindle nose - table surface 725 mmProjection spindle centre - stand 800 mm.Space requirement approx. 5 x 5 m,Weight approx. 12 tonnesThe machine was completely overhauled and modernised in 2000 with digital drives anddrives and Heidenhain controlFixed table 1200 x 71036-fold tool changer,coolant system,the pictured magnetic clamping table is not included in the scope of delivery ! -Working area: 1250 x 630 x 560Drive: 44 kWControl: Heidenhain TNC 426 PBThe data for this ad was created with ModulMWS - the software so ...

x-travel: 800 mmy-travel: 450 mmz-travel: 500 mmControl: CNC 332 / TNC 355 total power requirement: 5,5 kWweight of the machine ca.: 4 tdimensions of the machine ca.: ca. 3 x 3 x 2,5 mNo. 2213Universal tool milling machine MAHO MH 800 TWorking area: 800 x 450 x 500(800 longitudinal / 450 vertical / 500 transverse)Drive: 5.5 kWControl: Heidenhain CNC 332 / TNC 355Universal built-in rotary tableCoolant deviceChip traySplash guard half cabin, tool clampTechnical documentationTool holder ISO 40,Table clamping surface 600 x 900 m, max. table load 500 kg,quill stroke 80 mmSpeed range 63 - 3150 rpmFeed rate 1 - 1500 mm/minRapid traverse: 4.5 m/minWeight: approx. 4 tonsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 6000 mmy-travel: 3000 mmz-travel: 1000 mmControl: HEIDENHAIN TNC 640 table surface area: 6000 x 3000 mmtable weight: 8000 Kg/m²rapid traverse X-axis: 60000 mm/minrapid motion - y-axis: 60000 mm/minnumber of spindle speeds: 15000 U/min/rpmSpindle power: 35 / 42 kWtaper ISO: HSK A 100 distance between columns: 3000 mmdistance spindle nose and table: 280 - 1280 mmA-Axis: +125 / -125 °c-axis: 360 °total power requirement: - kWweight of the machine ca.: 65 tdimensions of the machine ca.: - mm- CNC control Heidenhain TNC 640- Universal milling head 2-axis- 5-axis automatic Compensation system- Automatic tool changer 40-fold (HSK 100)- Internal spindle cooling- Blum tool measuring system- Blum workpiece measuring system- Heidenhain linear scales- Portable handwheel- Chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 275 mmmax. module: 6 min. module: 1,5 Control: SINUMERIK 840 C tooth width: 5,5 mmspiral angle: min. 0 / max. 60 °max. number of teeth: 120 min. number of teeth: 5 ratio of transmission: 1:10 min. ratio of transmission: 1:1 work piece spindle speed: max. 110 U/minblade head turning speeds: 20 - 110 U/mintotal power requirement: 100 kWweight of the machine ca.: 16,7 tdimensions of the machine ca.: 5,20 x 2,30 x 2,40 mInternal deburring device U axis / Q spindlechip conveyorcoolant deviceElectrostatic air purifier ELBARONno toolsNo workpiece clamping device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2023 : 4546 : prompt, Zwischenverkauf v : Taiwan : 32800 €: 1 : 65 - 2600 U/min: ISO 40 : 420 x 220 x 380 mm: 840 x 390 mm: 2.2 kW: 1600 mm: 1700 mm: 2000 mm: 1145 kg: 840 x 390 mm: 1000 mm/min: 5 : 14 x 63 mm: 200 kg: 420 mm: 220 mm: 380 mm: 0 - 600 mm/min.: 0 - 600 mm/min.: 65 - 2600 : 90 - 310 mm: 65 - 2600 : +/- 90° °: 100 mm: manuell : 2,2 kW: 950 x 250 mm: 90 - 310 mm: 100 - 480 mmdemo machine / mint conditionnet price (price for new machine € 41.800,00)swiveling operating panel3 axes digital read out Fagor 40i Innovamotor for horizontal- and vertical spindle: 2,2 kWfeed motors with inverter for X/Y/Z: 0,35 / 0,35 / 0,75 kWball screw spindles for X/Y/Z axesmanual gear box for spindle speeds1 pc. long milling arbor 27 mm3 pcs. recustion sleeves (MK1, MK2, MK3)1 pc. drawing bar ISO40 for horizontal or vertical spindlespindle protection with switchtable safety guar ...

max. workpiece diameter: 500 mmthreading length: 1250 mmmax. module: 10 min. module: 1 workpiece dia. over saddle: 250 mmspindle bore of workspindle: 102 mmquill stroke: 100 mmworkpiece turning speeds: 0,0032 - 2,6 U/minfeeds - rolls: 0,027 - 5,66 mm/WUfeeds - longitudinal: 0,3 - 198 mm/minmain drive: 4 kWswivel angle for work spindle: 90/120 °diameter of hob: 150 mmmilling width: 100 mmhob turning speeds: 45 - 560/900 U/mintotal power requirement: 9,5 kWweight of the machine ca.: 4,2 tMachine equiped with:- Heavy Duty Hob Head ApFw- change gears- Milling Head ApFF- Single Indexing Device ETE- Bush Rest- Coolant TankThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mmy-travel: 210 mmz-travel: 340 mmtable-size: 600 x 400 mmspindle turning speed range: 40-2000 U/minspindle taper ISO: 40 quill stroke: 60 mmrange L-W-H: 1200x2000x1700 mmdigital readout: PHILIPS weight of the machine ca.: 1.4 tActive Digital read outMisc.accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 4000 mmy-travel: 1500 mmz-travel: 3500 mmControl: Siemens 840D tool taper: ISO 50 spindle turning speed range: 5000 U/minpower capacity at 100 % load: 37 kWmax. torque on the spindle: 1296 Nmrapid traverse X/Y/Z: m/minmilling head -swivable: Gradtoolpiece magazine: chain magazine: 40 Stücktable surface area: dia 1500 mmtable load: ja 12 ttotal power requirement: kWweight of the machine ca.: tTravelling column milling machine with- control Siemens 840D- autom. Bi-rotativ milling head, 1x1°, 5000 U/min- tool changer 2x 40-fold (ISO 50)- chip conveyor- 2 Rotary Tables (dia 1500mm)- Renishaw RMP 60- Laser Sensopart- Coolant (Through Spindle and External)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 0,75 kWdegree: 45° Gradturning speeds: 10.000 U/minmilling height: 4,0 mmmotor: 400 Voltrange L-W-H: 560 x 300 x 450 mmweight: 44,0 kgDescription :- Advantage of the sliding guide rail: the workpiece is not moved and therefore cannot be scratched- Ideally suited for deburring and chamfering (visible edges) of various- Materials e.g .: steel, aluminum, non-ferrous materials, plastics, etc.- Ideal for producing visible edges with excellent surface quality- High dead weight for vibration-free workscope of delivery- Slidable guide rail 500 mm- milling head- HM indexable inserts- Operating tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2005 : 4541 : prompt, Zwischenverkauf v : China : 5700 €: 1 : 40 - 1.300 U/min: ISO 30 : 465 x 230 x 380 mm: 1000 x 280 mm: 2.2 kW: 1400 mm: 1300 mm: 2200 mm: 1120 kg: 90 °: 115 - 1.750 (115, 230,290 U/minMilling head rotatable and swivellable +/- 90° with manual quill 120 mm travel rangeSpindle sleeve feed takes place via a turnstile or with the fine feed by means of a handwheelSpindle head 350 mm manually traversableMax. drilling capacity 30 mmManual tool clamping vertical/horizontal by means of tightening screwAutomatic feed in X Axis,(8) 12 - 370 mm/minCoolant unitChip trayLighting1x Collet chuck set1 Stk Drill chuck with mounting4 Milling cutter holdersDoes not comply with the German UVV &, Austrian AMVOBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos ...

: gebraucht : 2004 : 4540 : ca. 2 Wochen ab Auftragse : Österreich : 19900 €: 1 : 63 - 3150 (18) U/min: 700 x 500 x 500 mm: 900 x 500 mm: 6.6 kW: 2150 mm: 2220 mm: 2120 mm: 2550 kg: 500 kg: 100 mmCNCHeidenhain TNC 41018. mech. feeds with rapid travel in X,Y,Z axesball screw spindlestoolmaker accuracyDIN 8615hyd. tool clamping with holdersSK40 vertical und horizontalvertical spindle+/- 30° swivelingswing out devicedigital 3D edge finderwork area protectioncoolant equiptmentaut. central lubricationfixed angle table with 10 t-slotschip collecting traymachine lampusers manual in GERMAN + CECOMPLIES WITH THE CURRENT INDUSTRIAL SAFETY REGULATIONS (AMVO &, UVV)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 630 mmy-travel: 500 mmz-travel: 500 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Heidenhain TNC 426electronical hand wheelmanual swivel headquillcoolant devicemeasuring feelerTechnische Daten: /technical detailsX Weg / x travel 630 mmY Weg / y travel 500 mmZ Weg / z travel 500 mmDrehzahlbereich 2-stufig / spindle speed range (2-steps) 20 - 7000 UpM / rpmEilgang / rapid feed 15 m/min.Spindelaufnahme / spindle taper SK 40 Gewicht der Maschine ca. / weight 4500 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Discharge 315mm. Including vise, cutters and accessories in and including cabinet Auction-ID: A1-48474-17

General Description Horizontal milling machine, exported by Stankoimport. Designed for milling, slotting and general machining operations. The machine is equipped with a horizontal arbor spindle and supplied with installed milling tooling and a table-mounted clamping fixture. Technical Details Machine type: Horizontal milling machine Exporter: Stankoimport Horizontal arbor spindle T-slotted work table Multiple milling cutters mounted on the arbor Table-mounted clamping fixture included Manual X/Y/Z table feeds Mechanical feed gearbox with feed and spindle speed selectors Condition Used industrial condition. The machine appears complete with horizontal spindle, arbor, milling cutters, T-slotted table and clamping fixture installed. Operational status, spindle condition and machining accuracy have not been tested. Auction-ID: A7-49124-24

Discharge 315mm. Includes machine clamp, collets in and including cabinet Auction-ID: A1-48474-16

x-travel: 500 mmy-travel: 300 mmz-travel: 380 mmtable surface area: 800 x 420 mmtable load capacity: 400 kgtool taper: ISO 40 spindle turning speed range: 40 - 2000 U/minfeeds longditudinal/cross/vertical: 10 - 500 mm/minrapid traverse: 1500 mm/minmain drive: 3 kWweight of the machine ca.: 1,3 tdimensions of the machine ca.: m 3-axis digital readout (Heidenhain) Adjustable vertical milling head with quill adjustment Additional horizontal spindle REPAR 2 safety device (www.repar2.com) Machine light Anti-vibration mountsThe machine is sold without a vise or tooling.Transport dimensions:The machine is loaded onto a heavy-duty pallet,Dimensions: 1800 x 1100 x 2100 mm (length x width x height)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Including workshop cabinet with contents Auction-ID: A1-48474-84

Table: 1850 x 800 mm Auction-ID: A7-32339-10

x-travel: 2.600 mmy-travel: 1.100 mmz-travel: 900 mmcontrol: 840 D sl Celos SiemensMain spindle:: turning speed range - main spindle: 20 - 20.000 min/-1power capacity - main spindel: 35 kWmax. Torque: 120 Nmtool taper: SK 40 DIN 69871swivellable: B: +/- 100 °work table:: table surface area: 3.200 x 1.100 mmmax. table load: 4.000 kgmax. workpiece height: 972 mmNC-Rotary table:: rotary table dia.: 1.050 mmC-Axis: 360 °max. workpiece weight: 1.200 kgtool magazin:: number of toolpositions: 120 pos.tool taper: SK 40 DIN 69871max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 300 mmmax. tool weight: 6,0 kgfeeds:: rapid traverse ( X / Y / Z ): 40 m/minfeed speeds: max. 40.000 mm/minfeed power: XYZ: 12 / 10 / 12 kNtotal power requirement: 68 kVAweight of the machine ca.: 28 tdimensions of the machine ca.: 9,0 x 6,0 x 3,3 mChip conveyor: Coolantsystem: hi ...

Reference: Lebendigig - Lot 83 Auction-ID: A7-49056-237

Reference: Lebendigig - Lot 84 Auction-ID: A7-49056-238

Speed: from 200 to 1250 rpmTable dimensions: 360 x 120 mmwith three grooves and a vice, jaw width: 75 mmReference: Lebtig - Lot 85 Auction-ID: A7-49056-239