fresadoras usadas para venda (2,492)

Machine number: F39455Operating voltage: 400 VControl voltage: 230 VFrequency: 50 HzRated current: 100 AConnection: 50 kVAControl: SIEMENS SINUMERIK 840 CTravel X-axis: 5000 mmTravel Y-axis: 1200 mmTravel Z-axis: 1000 mmRapid traverse: 0 - 10 m/minFeed: 0 - 4 m/minSpeed: from 20 to 2800 rpmMilling head position vertical/horizontal/middle/horizontal right/horizontal left/horizontal topUniversal milling head particularly suitable for milling with 5-fold spindle positioning DrillingTable dimensions: 3750 x 1250 mmwith 9 groovesTool holder: SK 50Rotary table dimensions: 1250 x 1250 mmwith 9 grooves and an attached RÖHM three-jaw chuck, diameter: 500 mmincl. large batch of clamping devices and a large batch of SK 50 tool holders, corresponding carriersincl. 60-fold tool changerincl. the tool holders in the tool changer shown in the photosincl. chip conveyor and coolant systemAttention: the m ...

Machine number: 344169Operating voltage: 400 VFrequency: 50 HzRated current: 20 AConnection: 12 kVAControl: HEIDENHAINTable dimensions: 650 x 350 mmwith 5 groovesGroove spacing: 63 mmMax. load: 250 kgTravel X-axis: 400 mmTravel Y-axis: 320 mmTravel Z-axis: 400 mmMax. distances top of the table to horizontal spindle center: 140 - 540 mmTop of the table to vertical head bottom edge: max. 430 mmTool holder: SK 40Speed: from 0 - 4000 rpmQuill stroke vertical: 60 mmVertiakl head swivel on both sides: 90° Feed longitudinal and transverse: 0 - 2000 mm/minRapid traverse longitudinal and transverse: 5 m/minFeed vertical: 0 - 2000 mm/minRapid traverse vertical: 4 m/min Auction-ID: A7-49089-475

INDUMA MBM-22 Bed Milling Machine, Milling Bench, Large Capacity Milling Machine, with HEIDENHAIN TNC 355; With many accessories. Can also be used conventionally in manual mode; Voltage: 380 volts; Table size: 2200x900mm; T-slot: 18mm; Travel X-axis: 2000mm; Y-axis travel: 900mm; Travel Z-axis: 900mm; approx. 15t Auction-ID: A1-48979-3

Auction-ID: A1-49365-4

machine ready for transport and to be assessed on viewing day Auction-ID: A1-48649-75

Milling head tiltingly adjustable, including tool trolley with tool holders, including: collet holders, push-on milling holders. including clamping tool and work table with contents; Auction-ID: A1-49001-1

Mori Seiki CV 500 Machining Center X-axis: 510 mm Y-axis: 510 mm Z-axis: 510 mm Pallet length: 750 mm Pallet width: 550 mm Spindle Type: BT-40 Max. workpiece weight: 200 kg Spindle motor power: 7.5 kW Number of tools: 24 Spindle speed: 8000 rpm Dimensions: L 2000 x W 3600 x H 2750 mm Machine weight: 4400 kg Auction-ID: A7-49053-28

Grinding range: 400 × 800 mmControl cabinet: SiemensCircuit diagram: 170525_1Rated current: 27 ANet: 3 Phase-50 HZ-400 V. Auction-ID: A7-49604-12

Including attached clamping table 3000x2000x300 Auction-ID: A7-32339-9

Chuck and cylinder mounted on this machine: Marker: KITAGAWA Chuck: B106A515 Cylinder: F1241H-15 Max. Press: 500 PSI; 35 kgf/cm2 Max. RPM: 500 RPM Auction-ID: A7-49053-80

CNC FIDIA CXR Axis Travel: X mm 2500 Y mm 1000 Z mm 1200 rapid feedrate mm/min 15.000 TABLE: Dimensions mm 2700x900 MAx load on the table 8000 kg n. 7 T slots 22 mm RAM square section mm 390x390 spindle motor power 20 Kw SPINDLE automatic birotative milling head 1 / 3 degree Spindle nose ISO 50 Max spindle speed 4500 rpm Max torque Nm 760 EQUIPPED WITH: n.2 chip conveyor Movable and rotating operator panel Cooling unit Auction-ID: A1-48745-14

Technical data Manufacturer: HURCO Type: VMX50/40T Front designation: VMX50 Year of Make: 2004 Control: HURCO ULTIMAX with dual screen Power supply: 3-phase Frequency: 50 Hz Connected load: 30 kVA, according to the nameplate Dimensions: approx. L 3,300 x W 2,300 x H 2,800 mm Weight: approx. 7,000 kg Configuration CNC vertical machining center with closed work area, automatic tool changer, chip conveyor and coolant system. Including separate CNC dividing head or rotary table with 3-jaw chuck and connection cables as well as two machine vices. Remarks According to the client, the machine was in use in production until the end. The controls are turned on in the pictures. Auction-ID: A7-49302-76

table size: 500 x 1200 mm,feeds:X axis: 1000 mm,Y axis: 550 mm,Z axis: 600 mm,spindle taper: ISO 40,spindle speed range: 60-2700 rpm,spindle drive: 10 kW,electrical connection: 380 V 20 kVA Auction-ID: A7-49398-26

machine ready for transport and to be assessed on viewing day Auction-ID: A1-48648-107

Contimac Drill-milling machine with stand, Column drill, Milling machine; Voltage: 230 volts; Recording: MK-3; Extension: 200 mm; Table dimensions: 730 mm x 210 mm; T-slot: 16 mm; Weight approx. 280 kg Auction-ID: A1-48979-19

Type: C1050 3 Axis Machining Center Year of construction: 2010 Machine type: Machining center Condition: energized, ready for immediate use. Operating hours: approx. 29800h Spindle hours: approx. 9000h Control: iTNC 530. Spindle Rotation Number: 10,000rpm Tool magazine: 30 x-axis (mm) 1,050 Y-axis (mm) 530 z-axis (mm) 630. Spindle/Table Distance (mm) 85-715 Accessories: Documentation Chip conveyor Coolant Setup Tool changer 30 pos. incl. tool holder Linear scales in all axes X / Y / Z 3D Buttons electr. Handwheel . Incl. tools in the turret Note: without vice! Auction-ID: A7-49053-24

Auction-ID: A1-49365-58

Technical data Manufacturer: Friedrich Deckel, Munich Type: FP1 Design: conventional universal tool milling machine Travel X / Y / Z: 300 / 150 / 340 mm (Source: Online research) Spindle speed range: 40–2,000 rpm, 16 steps (source: online research) Feed range: 10–500 mm/min, 16 steps (source: online research) Tool holder: standard taper 40 for normal version; Special version Morse taper 4 possible (Source: Online research) Clamping surface: 195 × 600 mm for normal version (source: online research) Drive power: 1 / 1.4 kW in the researched version (source: online research) Net weight: approx. 660 kg including control cabinet (source: online research) Configuration With vertical milling head, T-slot work table, manual handwheels, mechanical speed and feed selection as well as CEE connection plug as shown. Remarks The machine comes from a plant closure, was actively used in productio ...

x-travel: 1120 mmy-travel: 350 mmz-travel: 400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Including attached clamping table 3000x2000x300 Auction-ID: A7-32339-8

Incl. accessories, consisting of: a.o. INTERLIFT - TMF300/ 600 - Filter system, dimensions (LxWxH) approx: 1550x1400x1600 mm, weight approx. 450 kg LAHNTECHNIK - OKM 593-331 - Heat exchange station, dimensions (LxWxH) approx: 1000x760x1600 mm, weight approx. 190 kg KNOLL - 340 K-1/205 - Chip Conveyor HASLINGER - ChipCarrier SQ 450 - Chip trolley, dimensions (LxWxH) approx: 1100x950x1030 mm, weight approx. 99 kg ROEMHELD - Hilma EL 160 - Machine Vise DELBAG - KNA/W 1/1-AFec-re - Filter extraction Workbench, with contents, dimensions (LxWxH) approx: 1210x600x850 mm Auction-ID: A1-49674-1

FPT mod. MOVING COLUMN CNC MILLING MACHINE RONIN M60 SELCA 4045 numerical control X-axis 6,000 mm Y-axis 1,250 mm Z-axis 2,000 mm Rapid feed 30,000 mm/min Working feed 15,000 mm/min 42 kW spindle motor Indexed head ISO 50 spindle mount Maximum speed 5,000 rpm Spindle extension head ISO 50 spindle mount Maximum speed 7,500 rpm Table 7,000 x 2,500 mm 12-position tool changer Total installed power 74.4 kW Complete with: - 3-position head magazine - Chip conveyor angular plates not included - Tool lubricating coolant - Remote control panel with display - Tool verification probe Auction-ID: A1-48745-1

Serial number: 4038Operating voltage: 380 VFrequency: 50 HzRated current: 13 ASpeed range: 40 – 2000 rpmTool holder: SK 40Feed range: infinitely adjustable, all axes: 5 – 500 mm/minCreep traverse: 4 mm/minRapid traverse: 1200 mm/minRange of movement: X: 290 mm / Y: 150 mm / Z: 330 mmVertical milling head can be moved on spindle block: 100 mmMovement spindle: Rotation of the dial for longitudinal movement: 4 mm Transverse and vertical movement: 2.5 mmGraduation of the scale disc: 0.02 mmTable dimensions: 600 x 210 mmwith 4 groovesReference: Showroom Auction-ID: A7-49056-30

With accessories Auction-ID: A1-49382-30

Mikron VCE 600 Pro CNC Machining Center Manufacturer: Mikron Type: VCE 600 Pro Condition: used, energized and in production Control: Heidenhain iTNC 530 Incl. tools in the turret Auction-ID: A7-49053-27

MTCut V110 4 Axis Machining Center (2012) Manufacturer: MTCut Type: V110 Year of Make: 2012 Condition: used, very good, in production. Switch-on hours: 14150h Spindle hours: 3710h Control: Itnc 530 Travel range. X x Y x Z = 1100 x 640 x 610mm – 30-fold tool changer ISO 40 – 4th axle Lehmann, 200mm lining with hydr. Workpiece clamping and 350mm face plate. – Internal coolant supply 50bar – Spindle cooling – Measuring Buttons – Dimensions approx. L x W x H 3.2 x 3.2 x 3.1m (Transport height 2.5m). Incl. tools in the tool turret Auction-ID: A7-49053-17

Machine Brand: Friedrich Deckel, Munich Type: FP1 Serial Number: 35968 Features: universal milling machine with vertical and horizontal spindle head, adjustable height, cross table with handwheels on X/Y, protective cover/splash guard above the spindle Speeds and feeds (type plate cutting data) Horizontal spindle speeds (positions I/II): 60-1200 rpm in multiple steps (60, 95, 120, 150, 190, 235, 300, 375, 475, 600, 750, 1200) Vertical spindle speeds: 95-1900 rpm in steps (95, 120, 150, 190, 235, 300, 375, 475, 600, 750, 950, 1200, 1900) Feed (mm/min): from 0 to 475 mm/min in several steps, adjustable both horizontally and vertically via lever positions Cutting speed diagram (m/min) present on nameplate for cutter diameters 4 to 130 mm Associated fate Cabinet with attachments/parts is offered with this machine Auction-ID: A3-46152-11324

machine ready for transport and to be assessed on viewing day. 3 extra loading meter / cooling tray / adjustable feet and books. Chip conveyor not included Auction-ID: A1-48649-39

Kunzmann WF 7 CNC Milling Machine TNC 410 Control Manufacturer: Kunzmann Type: WF 7 Year of Make: 2001 Condition: used, under power Control: Heidenhain TNC 410 X-Weg 610 Y-Path 400 Z-Weg 400 Pick-up SK 40 Speed 1-5000rpm Tilting/swivel table Scope of delivery: – Documents - Approx. 10 tool holders - Without vice Auction-ID: A7-49053-2

Operating voltage: 230 VFrequency: 50 – 60 HzRated current: 2.8 AControl: EMCO EASY 2 CONTROL (HEIDENHAIN TNC 640, SIEMENS SINUMERIC 840)Tool holder: probably SK 30Max. tool clamping length: 35 mmTable dimensions: 420 x 120 mmwith 2 grooves and a special EMCO viceJaw width: 60 mmTravel - X: approx. 190 mm, Y: approx. 140 mm, Z: approx. 260 mmincl. matching mobile workbench with various suitable contentsincl. 7-fold tool changer, collets and various matching tool holders Note: An identical and completely identical machine will be delivered and not exactly the one that can be seen in the photos. The illustrations serve only as examples. It cannot be guaranteed that the accessories shown are included in the scope of delivery Auction-ID: A7-49056-35