máquinas de bebidas usadas para venda (2,035)

Overview  This fill level and closure inspection unit was manufactured in 2014 by the German company Krones AG. The Krones Checkmat 731 was used for overfill and underfill detection based on high-frequency (HF) measurement as well as closure control for metal caps via sensor technology integrated into the filler. The system was recently dismantled in full working condition after being replaced by a newer camera-based inspection system. All peripheral components such as trigger light barriers, encoder, and pusher were properly disconnected and are included in the delivery. Technical data Inspection functions: Overfill and underfill detection using HF (high-frequency) method Closure control via integrated sensor for metal caps (mounted in filler) Condition: Excellent, fully functional before dismantling Status: Dismantled and stored, ready for shipment Application: Bottling lines for beve ...

Linha Completa de Engarrafamento PET de CSD – 12.400 BPH Fabricado: 2008–2009 | Localização: Alemanha | Disponível: outubro de 2026 Esta linha completa de engarrafamento em PET (CSD (Refrigerante Carbonatado) foi concebida para a produção eficiente e fiável de bebidas gaseificadas. A linha é composta por equipamentos europeus de alta qualidade de fabricantes líderes como SIPA, GEA Procomac, Arol, SMI, PE Labellers, Ventilo, Robopac e TwinPak. O sistema ainda está atualmente em produção, garantindo excelentes condições operacionais e possibilidades imediatas de demonstração. Dados Gerais da Linha Capacidade nominal: 12.400 garrafas/hora Capacidade efetiva: aproximadamente 10.000 garrafas/hora Tamanhos das Garrafas: 0,5 L 0,75 L 1,5 L Tipo de Garrafa: Garrafas redondas de PET Tipos de Boné Tampa plana: PCO 1881 Boné Desportivo: Aptar PCO 1881  ...

Overview  This chamber pasteurizer was manufactured in 1996 by German company JOHA (Johannes Arno Hartenstein). According to available documentation, the machine was acquired in 2021 as a unit described as overhauled and partially renewed, and the control system was renewed in 2020. The machine is immediately available and can be viewed in person. Technical data  Type: Chamber pasteurizer Heating: Steam Capacity / Content: Total chamber volume: approx. 10.3 m³ Net usable volume: approx. 5,850 L Electrical connection: 230 / 400 V, 50 Hz Installed power: approx. 5.2 kW Current: approx. 10.5 A Fuse: 3 × 35 A (slow-blow) Protection class: IP54 Steam connection: DN 80 Condensate connection: DN 50 Max. steam pressure: approx. 0.2 bar Steam consumption: approx. 300 kg/h Noise level: < 70 dB(A)  

Linha Completa de Engarrafamento de Vidro para Enchimento a Quente e Enchimento a Frio (Krones / KHS) Capacidade: até 33.000 garrafas/hora (garrafas de vidro de 500 ml) YOM: 1999-2007 - muitas melhorias, veja abaixo! O sistema oferece máxima flexibilidade, permitindo enchimento a quente, enchimento a frio, bebidas calmas e gaseificadas, e múltiplos tamanhos de garrafas. Importante: O enchimento também pode ser usado em garrafas PET, oferecendo maior flexibilidade de produção. Dados Técnicos Chave Tipos de Garrafas Garrafas de vidro (não devolvíveis) Garrafas PET também podem ser enchidas Tamanhos das garrafas 250 ml – 1000 ml Produtos Sumos de fruta (laranja, maçã, tomate, etc.) Bebidas quentes Bebidas de enchimento a frio Refrigerantes gaseificados (CSD) Tipos de Cobertura Tampa de alumínio de 28 mm Tampa de alumínio ...

LINHA USADA DE PASTEURIZAÇÃO E ENGARRAFAMENTO DE LEITE FRESCO composta por: Separador de natas de leite Marca: Seital Modelo: SE13X Capacidade: 2500 l/h Ano de fabricação: 1993 Permutador de calor de placas - pastador de flash - Marca: KMA Modelo: K21-FS/4273 Capacidade: 2500 l de leite de 8ºC a 75ºC Ano de fabricação: 1998 Bomba centrífuga Marca: Südmo Válvula de disco operada manualmente e pneumática, amaturos, manómetro, sensor de pressão, etc. Homogeneizador Marca: Niro Soavi Modelo: NS 3018-H Capacidade: 2500 l/h Ano de fabricação: 1998 Alta pressão: 150 bar Quantidade do pistão: 3 Depósito de equilíbrio em aço inoxidável, capacidade de aproximadamente 50 l com topo aberto, tampa e suporte sobre três pés com torneira de saída. Válvulas de disco e amaturas operadas manualmente e pneumáticas. Sistema de garrafas de ...

Overview This microbrewery had to cease operations in recently. The original plan was to continue operations, but as this did not happen for various reasons, the entire equipment is now being sold as a whole. Equipment Steam generator with gasoil burner and its tank. Three-phase mill for grain grinding. 800-liter brewhouse with steam jacket consisting of boiler, filter tank, lung, liquor tank, tubular cooler, accumulated osmotized water tank, and 3 necessary pumps for its operation. Industrial osmosis and descaling equipment. 4 atmospheric cylindrical-conical fermenters with refrigeration jacket and a capacity of 1000 liters. 3 atmospheric cylindrical-conical fermenters with refrigeration jacket and a capacity of 1300 liters. 1 cooling system for fermenters with temperature control panel by PLC. 1 cleaning pump. 1 transfer pump. Several hoses necessary for transfers and packaging. 1 atmo ...

An empty bottle inspection machine Heuft including a pre-sorting unit Heuft Spectrum SX TB 72 and Gateway II is available. Inspector: rated throughput: 72000bottles/h, bottle types: Ale/NRW/Euro/Krombacher swing top/swing top, bottle colors: green/brown/clear, closure types: crown cap/screw cap/embossing, bottle volume: 330ml/500ml, pre-sorting: bottle type/bottle height, inspection types: sidewall/finish/thread/base/residual liquid/labels/test bottles. Including defective bottle reject systems and infeed and outfeed conveyor. Documentation available. An on-site inspection is possible.

Filler SEN Combi RE com 124 válvulas de enchimento, bloqueadas com Tampa de Parafuso Zalkin de 20 Dígitos Capacidade: 19.900 bph a 1,5 litros. Garrafas PET Ano de Fabricação: 1991 Sistema de enchimento: Sistema de enchimento isobárico Formatos das garrafas: 1,5 litros. PET e 0,5 litros. PET Direção da corrida: esquerda - direita A máquina é adequada para encher refrigerantes carbonatados. incluindo sistema de alimentação por fecho: Gassner A máquina já não está em produção, mas continua ligada.

Máquina de Moldagem por Sopro Kosme Modelo n.º: KSB 6R com 6 cavidades Ano de Fabricação: 2017 Diâmetro do pescoço: PCO 1881 Capacidade: 12.000 bph Tamanho do recipiente: máximo 3,0 litros incluindo o sistema de alimentação de pré-forma incluindo refrigerador (unidade de arrefecimento) sem moldagem por sopro já desmontada no final de janeiro de 2026.

No pasteurizador de câmara de vapor, as garrafas podem ser pasteurizadas em caixas sobre paletes com vapor quente. Os parâmetros para o aumento de temperatura e o tempo de manutenção da temperatura de pasteurização definida podem ser definidos conforme desejado. Condição: em funcionamento e bem mantida Capacidade nominal (1 l garrafas): 480 garrafas/h Electr. Potência: 4,00 kW Cargas ligadas: 400 V / 16 A / 50 Hz / 5-pH Ligação a vapor: 3/4 de polegada Ligação de ar comprimido: 6 bar Dimensões da máquina (LxDxH): 1400 x 2000 x 2700 mm Peso: 700 kg

Preenchimento de latas tipo Leibinger Canvasa Capacidade: aprox. 1.000 latas por hora Concebido para latas padrão: tipo de lata 211 / 202 Sem uma mesa de lata incluindo o controlo do Siemens S7 Princípio de enchimento: Tecnologia de enchimento por contrapressão Absorção de O2: 10-60 ppb Área de encaixe: corresponde ao tamanho de uma palete Euro padrão A Canvasa é uma máquina compacta e semi-automática de encher latas. É adequado para bebidas gaseificadas e calmas. A máquina continua em produção numa cervejeira até julho de 2026 e pode ser vista durante a operação contínua.

Overview The components of this PET filling line were manufactured between 1997 - 2014 by different European manufacturers. The line is designed for carbonated beverages such as lemonades and also suitable for water with CO₂. With an output capacity of 33.000 bph, it offers a complete solution from bottle blowing to palletizing. The equipment becomes available as the seller replaced it by more modern machines. Technical Data Capacity: 33.000 bph at 1,5l Format: 1,5l Filling product: carbonated water and soft drinks  OPP wrap-around label from a reel with hotmelt and glue labelling station Packaging formats: shrink wrapping without tray Pallet: Euro pallet (1.200 x 800 mm)  condition: regularly maintained, stopped   Preform kipper | Sidel | EBHS 2050 | 2010 Preform feeding system | Sidel | EBHS 2050 | 2010 Blow mold chiller | Trane | RTAC 185 | 2003 Blow molding machine | Sidel  ...

Overview This pallet labeler was manufactured in 2007 by the German company Logopak.  Manufacturer: Logopak Model: 920 PF Self-adhesive label for pallets. Label size: A5

Overview  This set of ten stainless steel isobaric tanks was manufactured between 2012 and 2024 by the Spanish company EtD (Talleres Esteban Tolosa). The lot includes five fermenters and three lagering tanks, all pressure-rated at 3 bar. All tanks are in good condition, fully functional, and well maintained. The newer 2024 models have seen minimal use. The tanks can be purchased as a complete set or individually upon request. Technical data  Type: Isobaric fermenting and lagering tanks Manufacturer: EtD (Talleres Esteban Tolosa) Years of Manufacture: 2012 – 2024 Total Units: 10 (7 fermenters + 3 lagering tanks) Working Pressure: 3 bar Material: AISI 304 stainless steel Scope of Delivery  Fermenting Tanks 3× 45 hL (net 45, gross 47) | EtD | 2012 2× 50 hL (net 50, gross 55) | EtD | 2024 2× 50 hL (net 50, gross 55) | EtD | 2020 Lagering Tanks 3× 50 hL (net 50, gross 55) | EtD | 012 ...

Overview  The swing top closing machine was built in 2004 by the German manufacturer Rico. The machine is still in operation and can be inspected at any time.  Technical data  Output: 12,000 bottles/h  Formats: 0.33 l (Steinie bottle)  14 capping stations  Running direction: clockwise Touch panel for operation  Control system: Siemens S7 

Carcaça de filtro de cartucho de 8 vezes com novos elementos filtrantes a pedido, mediante custo adicional

Vende-se uma caixa de filtro de 3 compartimentos A pedido e mediante um custo extra com novos elementos filtrantes

Some plant components from a bottle filling plant are available. 1) Indexed rotary bottle capper Kematec MBK 1 AR. 2) Belt station Cornelis Costamat-PP-1. 3) End-of-line packaging machines Normpack. An on-site inspection is possible. The offer is not a complete line, but plant components that have been decommissioned.

com altura adesiva de 200 mm Direção da corrida: esquerda - direita Controlo de frequência

Máquina de sopro KRONES Contiform S 8 Ano de fabrico: 2003 Capacidade: 14.000 BPH Tamanho do pescoço: PCO 28 - 1881 Tamanho da garrafa: 1,5 litros. Garrafa de PET incluindo unidade de arrefecimento incluindo Sistema de Alimentação de Prestação incluindo contentor de preform incluindo dispositivo de inclinação de preformação Está disponível um sistema de transportadores de ar imediatamente disponível na Alemanha A máquina está em bom estado.

Direção da corrida: esquerda - direita com revestimento de segurança Capacidade: 1.500 - 7.000 bph incluindo bomba de cola Condição máxima

Linha de enchimento asséptica de PET Sidel Existem 2 capacidades: 18.000 litros/hora e 27.000 litros. / h - dependendo do tamanho das garrafas Capacidade: 36.000 BPH por 0,5 litros. e 0,4 litros. 18.000 bph por 1,5 litros. Ano de fabrico: 2006 - 2025 A linha Aseptic produz produtos assépticos e está em funcionamento desde 2006. Todas as atividades de manutenção foram realizadas duas vezes por ano de acordo com as especificações OEM e com peças originais OEM por técnicos de serviço OEM. A linha inclui áreas de processamento (misturador, pasteurizador e tanque asséptico), plataforma APA (solução para esterilização das garrafas e tampas de PET), enchimento, módulos CIP para processamento e enchimento, 4 câmaras, inspetor de garrafas completas (360 graus), mesa de acumulação, máquinas de rotulagem (roll on e sleever), empacotador, paletizador e invólucro el ...

Overview The rotary filling and capping machine manufactured by Bertolaso in 2022 is currently used for vinegar production. It features 30 filling valves and 4 capping stations and operates based on the atmospheric filling principle. The machine can be used with a wide range of shape-stable containers and is suitable for filling low-viscosity, non-carbonated liquids. Technical details:  Filler: 30 valves (Ø16 mm), model Olimpia 30/1050 Capper: 4 Pick & Place heads, model Sigma P&P 4/350 Bottles: 600 ml & 1000 ml cylindrical (range Ø55–95 mm, H160–360 mm) Caps: Pre-threaded plastic Output: 8,000 bph (600 ml) / 6,000 bph (1000 ml) Material: All product-contact parts in AISI 316 stainless steel Bowl: Electrically height-adjustable, mechanical float level control Features: Automatic valve opening/closing Centralized fill-level adjustment (±50 mm) Maintenance-free lifting cylinders Au ...

Overview The filler was manufactured in 2004. It was used in a brewery in France during the last years. The complete brewery was sold to a company in Belgium. The filler is not needed anymore and therefore for sale. It can be used for filling beer and soft drinks. The machine is disassembled and properly stored. Tech Specs: Capacity: 2500 b/h at a Volume of 0,75 l/b 3300 b/h at a Volume of 0,33 l/b 20 rinsing nozzles 20 filling valves 3 capping elements Formats: 0,33l; 0,75l Working direction: clockwise

Overview  This pilfer proof capping machine was manufactured in 2022 by the Spanish company CTM Ingeniería. It has been used for only 1.5 years under light operating conditions as part of an in-house production line. The company is now outsourcing its bottling operations, and therefore the machine is available for sale. It is in excellent condition and ready for immediate integration into a new production setup. Technical data  Capacity: approx. 1,200 bottles/hour (in a fully automated line) Cap type: Pilfer proof screw caps Head: Configured for 28 mm caps (interchangeable with other sizes) Bottle compatibility: Adjustable height, currently configured for small bottles Construction: Compact stainless-steel design Condition: Excellent, used for only 1.5 years Operation: Suitable for integration into automated bottling lines  

Overview The tray packer was built in 2015 by Italian manufacturer Atlanta. The machine is in a good condition, already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 15 trays per minute Specifications: Currently entry on single lane Full set of new parts for entry on double lane included in supply For carton thickness: 2 to 5 mm Flap closes from the bottom Current configuration:                        for bottles PET 0.25L & 0.50L 4 packs/tray in 3x4 for 0.25L bottles 4 packs/tray in 2x3 for 0.50L bottles in carton neutral or printed Machine control: Siemens S7 touch screen Machine equipped with entry & exit conveyors

Overview This labelling machine was manufactured in 2004 by the German company GERNEP. The model Labetta 4/3/12 784 2A 3SK is equipped with two wet glue stations and three self-adhesive labelling stations, offering flexible labelling configurations for a variety of bottle types. The machine has a capacity of 8,000 bottles per hour and is available immediately. Technical data  Capacity: 8,000 bph (6,500 bph with photoelectronic orientation) Number of bottle plates: 12 Number of labelling stations: 5 Station 1: Wet glue, labelling height 330 mm, steel glue roller Station 2: Wet glue, labelling height 230 mm, steel glue roller Stations 3–5: Self-adhesive Orientation: Photoelectronic bottle orientation via cap Prepared for orientation via bottle cam Electrical height adjustment Operating voltage: 400 V Frequency: 50 Hz Control unit: Siemens S7-200, Touch TD integrated Direction: Right to  ...

Overview  This fill level and closure inspection machine was manufactured in 2010 by German company KHS. The operation view will be done with the label inspection machine from Indspect. It is designed for checking the fill height, closure and label of full bottles. The machine was running until January 2025 and is now stored in the company. Technical data Capacity: up to 25,000 bph Scope of Delivery  Fill level and closure inspection system | KHS Label inspection system | Indspect

Overview   This capsule machine (model: PRISMA 200 R) was manufactured by the Italian manufacturer NORTAN in 1999. The machine has already been dismantled and stored, but is in good condition. It can be inspected at any time and is available immediately.  Technical details   Output: 13,000 bottles per hour Bottle formats processed: 0.375 L, 0.75 L, 1.5 L (Burgundy and Bordeaux bottles) Accepted capsule sizes: 45 mm and 55 mm length, 30 mm diameter Capsule loader included

Complete falling film vacuum evaporator, previously used for infant milk, consisting of 5 bi-thermal effect TVR Evaporator with a direct steam injection (DSI) pasteurizer and an expansion chamber. Still mounted in the Danone plant in France till end of March 2026. The product feed rates in the installation can vary between 14 and 23 t/h with a comparative temperature between 78 and 54°C from the 1st to the 5th effect. The system is heated primarily by injecting steam into the thermo-compressor. The preheating of the incoming product is achieved via tubular heaters supplied by vapours drawn from the beams. A direct steam injection pasteurizer and expansion chamber is provided to pasteurize the product in a range of 118 to 133 °C., Line modified in 2000 to replace the mixing condenser with a tubular condenser and installing the heat treatment with direct steam injection., The evaporator  ...