máquinas de bebidas usadas para venda (2,097)

Overview This electronic empty bottle inspector (EBI) for returnable glass bottles was manufactured in 2008 by Germany HEUFT. The machine is designed for inspection of returnable glass bottles in beverage production lines. It is currently still installed and can be visited on request. Technical data Capacity: up to 60,000 bottles/hour (machine) / up to 54,000 bottles/hour (filler) Formats: 20 cl returnable glass bottles (Coca-Cola, multiproduct, Sprite formats) Application: Empty bottle inspection (returnable glass bottles) Configuration: Single-lane installation between bottle washer and filler Inspection technology: HEUFT reflexx inspection system Inspection systems: Base inspection (foreign body detection) Finish inspection (mouth / finish defects) Double sidewall inspection with 90° rotation Residual liquid detection (Dual High Frequency + Infrared) Detection & rejection: Detec ...

Overview  The pressure filler was built in 2013 by the German manufacturer KHS. The pressure filler is still in use at a large German brewery and can be inspected at any time.  Technical data  Capacity: 22,000 - 65,000 bph  Number of filling stations: 168 Number of capping stations: 24  Pitch circle filler: 5040 mm Scope of delivery  Valve node Vacuum unit Hygienic inlet Fill level and closure inspection Rejection and rejection belt Technical documentation Incl. program backup Extensive transporters available, which can be purchased additionally

Overview This isobaric PET bottle filling and capping machine was manufactured in 1996 by German company Krones. The block machine includes an ALCOA capping machine for screw caps and a cap feeding system from Gassner. It is suitable for carbonated soft drinks. The machine is out of production but still connected.  Technical data  filling and capping machine as a block system number of filling stations: 132 number of capping stations: 30 isobaric filling system suitable to carbonated soft drinks capping system: ALCOA Kupi 30/1080 for screw caps  cap feeding system: Gassner  capacity: 36.000/h at 1,0L  including neck handling system  bootle lifting cylinders direction: left-right / clockwise

Overview  The empty bottle inspector was built in 2004 by the German manufacturer Krones. It is installed in a mineral water company in Germany. On the line, where it is installed, the owner also does contract bottling. Therefore it has many detections and formats available. Technical details  Output: up tp 50,000 bph Last used for:  0,25 l Vichy bottle 0,5l Set 1 0,5l Set 2 0,5l Set 3 0,7l GDB 0,75l GDB Inspection modules Bottom inspection camera Sealing surface inspection camera Thread inspection camera with cone optics Side wall inspection camera Contour detection and color detection with camera Accessories/scope of delivery    Ejector some spare parts available some conveyors

Overview The brewhouse, including fermentation and storage tanks and a KEG washer, was built in 2013 by the Austrian manufacturer Flecks. The whole equipment is in a very good condition and can be visited. Equipment Mash and brew kettle incl. whirlpool function, agitator, stainless: 1.000 L net Lauter tun, stainless: 1000 L net Calandria system (outdoor cooker), electrical heating, stainless. Integration of existing gas, heating + electrical: 72 kW Vapour-condensation system Whirlpool- system Mash and wort pump: 2,2 kW Hot water tank with electrical heating, stainless: 1000 L, 9 kW Wortcooler GEA 2-stages pT 100, electron. Thermometers Incl. all pipes, fittings, valves in stainless. Full automation upgrade: electrical switch board for full automatic process control switches, fuses: 100 kW Main connection 400 V Emergency switch PC-databus and modem Visualisations and automation software  ...

Overview This ALWID Matador-HV linear filling machine was manufactured in 1997 and is designed for filling liquid products into various bottle formats in small to medium production environments. The machine operates with a high-vacuum filling principle, enabling level-controlled filling and ensuring consistent fill heights. The filler is equipped with five filling stations and achieves a capacity of approximately 1,000 bottles per hour at 0.7 L. One advantage of the system is that the filler itself does not require format parts, allowing flexible processing of different bottle sizes. The associated capping system can process both PP screw caps and swing-top closures (grip corks). For this purpose, the machine includes two cap sorting bowls, one for each closure type. Approximately ten format sets are available for the capper, covering round and square bottles from 0.2 L to 1.0 L. With it ...

Overview The filling line was manufactured in 2021 by the German company ALWID. The filling line is new and can fill  chemical products into plastic containers. With the exception of the bottle feeder and Posimat, glass bottles can also be processed. Due to ATEX certification, explosive products can be processed with the line. The equipment comes with a 2-year warranty (in single-shift operation) and all components of the equipment can be purchased separately.  Technical details Capacity: 9000 containers/h (varies according to bottle volume and product).  Container  Max. Diameter: 100mm  Max. Height: 300mm  Control Siemens S7 Single machines  Bottle Hopper | ALWID | POSIMAT-ACCESS-N15  Bottle feeder with hopper 2000 l, in stainless steel, chassis and supports in mild steel painted Positronic control system for optimal adaptation to downstream filler Machine, completely internally ...

Overview  This rotary roll-fed labelling machine was manufactured in 2009 by France SIDEL. The Rollquattro F15 18T is designed for roll-fed labelling of PET bottles in beverage production lines. The machine operates with a rotary system with 18 bottle plates and is configured with mechanical cam control and manual label splicing.  Technical data Capacity: approx. 18,000 bottles/hour Formats: 0.5 L / 1.0 L / 1.5 L / 2.0 L Application: Roll-fed labelling of PET bottles Configuration: Rotary machine with 18 plates, mechanical cam drive, manual label splicing Utilities: 400 V / 50 Hz / 23 kW / 46 A Scope of Delivery  Labelling machine | SIDEL | Rollquattro F15 18T | 2009 | Rotary roll-fed labeller with 18 plates Cooling unit | Kelvin Cool-Power | External cooling unit Control system | Control panel with process indicators

Overview This complete brewing equipment is mainly from 2014 and is becoming available because the company is closed. The equipment is already dismantled and stored properly. Scope  Water Softener Compressor | Josval Sauber 240 D Mill | Robix ROPPI 250 Thermindus Boiler Ps(Barg 6) PL (Barg 10.4) Ts Max 165, Ts min 10, kW 34 Portable Pump 2.20kw INOX Hoses, cones, keys Manual Isobaric Bottling Machine 4 spouts Automatic Labeler | Arca L10-8128 2x Rotating Table with Regulator 100cm Diameter, for input and output of bottles or cans Videojet 1220 Batch Coder Infrico Undercounter Refrigerator with 3 Doors Brewhouse | Spadoni | MBS 600 VAP | 2014 Spadoni 600, Masher 680 Liters, Bottom Filter, Rotating Blades, Transfer and Recirculation Pump Boiler 720lt with Whirlpool, with Boiler Pump and Spadoni Plate Cooler Hot Water Tank | Spadoni | 10hl Cold Water Tank | Spadoni | 10hl Mixing Tanks | Sp ...

Overview  This complete brewhouse was manufactured in 2012 and enables the production of 1,000-liter brews. The system works with steam and includes brewing, fermentation and storage tanks. It is immediately available and is currently installed and ready for operation in the production facility. The seller confirms that the system has worked perfectly until recently. The boilers have a copper coating, while the rest of the system is made of stainless steel. Details Wort yield: 1,000 liters per brew Heating system: Steam Current status: Installed and ready for operation Availability: Immediately Scope of delivery  Brewhouse | Mini Brewery System | CI T 10 | 2012 2 kettles (mash tun above the whirlpool as one unit + separate boiling kettle) Steam boiler | Mini Brewery System | - | 2012 (electric) Plate heat exchanger Hot water tank | 1,500 L Reverse osmosis system | ALFA | compact model  ...

Overview This keg handling package consists of a M+F Keg Technik Monomat + RMT keg washing system, a keg filling unit, and a large quantity of stainless steel kegs in various sizes, complemented by beer taps. The system is suitable for small to medium-scale brewery operations, enabling cleaning and filling of kegs for beer distribution. The washer was manufactured in 2019 and offers a compact and efficient solution for keg processing. Technical data Keg washer manufacturer: M+F Keg Technik Keg washer model: Monomat + RMT Year of manufacture: 2019 Capacity: approx. 12 kegs/hour Keg filler: Included (manufacturer unknown) System type: Semi-automatic keg washing and filling setup Equipment Keg Technik Monomat + RMT keg washer Keg filling system (standalone unit) 195 x 30 L stainless steel kegs (Type S/A) 39 x 50 L stainless steel kegs (Type S) 22 x 20 L stainless steel kegs (Type A) 22 x 10 ...

Overview  This glass bottle filler and capper was manufactured in 2018 by the Italian company GAI. The MLE 661 Bier model is a compact and precise filling monoblock designed for small to medium-sized breweries and beverage producers. It features Pick & Place technology for pilfer-proof aluminum screw caps (30x20 mm) and an electronic fill height adjustment system for easy format changes. With a capacity of up to 900 bottles per hour, the unit is suitable for bottles ranging from 0.25 L to 1.0 L. The machine is in very good condition and ready for operation. Technical data Filling system: Isobaric (for beer and other carbonated beverages) Capacity: 900 bottles/hour Bottle formats: 0.25 L – 1.0 L Closure type: Pilfer-proof aluminum screw caps (30x20 mm), Pick & Place system Electronic fill height adjustment Stainless steel construction

Overview  This stretch blow-moulding machine was manufactured in 2008 by Italian company KOSME (Krones Group). The machine is in good working condition and remains in production until end of November 2025. It will then be dismantled and craned out through the roof. Technical data  Capacity: 10,200 bph Working hours: ~50,000 h Formats: Neck finish: 29/21 (can be modified to 1881 or others) Preforms used: R-PET by Plastipak & Resilux Number of moulds: 6 (moulds not included) Equipment & Features: Quick change for shell molds Kosme linear oven 8 heating modules Kosme preform tipper with conveying system Kosme preforms feeding rail Kosme electrical cabinet Kosme Danfoss VLT drive Kosme touch screen control panel Set of spare parts (list on request) Service history: Kosme FBA maintenance Complete Kosme service in October 2024 Ongoing service by in-house technicians Scope of Delivery  Stret ...

Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers. The line is suitable for still and carbonated soft drinks and includes a blow moulder with compressed air generator, rinser/filler/capper, labeller, packer, palettizer, stretcher, conveyors inspection systems, mixing- and CIP-unit. The line reaches up to 8,000 bph at 1,5 l and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  Capacity: 8,000 bph at 1,5 l  Formats: 0,5 l and 1,5 l bottles Filling product: Water and carbonated soft drinks Closure system: Plastic screw caps Sport caps Packing: Shrink pack: 3x2 formation at 0,5 l and 1,5 l PET bottles Pallet type: Euro (1,200 x 800 mm) Düsseldorfer (600 x 800 mm) Scope of Delivery  Blow moulder: SIPA, year 2002 Compressed  ...

Capacidade: 18 litros.

Semi-automatic 5l Party Keg filling line, including 6-headed filler, capper, transport conveyors, washer and turner., Additional title: semi-automatic, Capacity: 240 cph, Power: 0.3 kW, Current: 1,85 A, Voltage: 400 V, Frequency: 50 Hz, Compressed air: 3.2 cbm/h at 6 bar, Length: 5000 mm, Width: 3000 mm, Height: 2300 mm, Operation / Control: SPS S7-200, Features: Single-point, semi-automatic canner Transport unit washer and turner

Overview This filler was manufactured in 2016 by CIMEC and comes with an Arol crown capper. The filler has an output of 1,800 bottles per hour, processes bottle sizes from 0.33 l to 0.75 l and is in very good condition. The machine can be viewed in person at any time. Technical details  Filler | CIMEC | AM DPS 9-8-1C | 2016 Output: 1,800 bottles/hour Number of rinsing nozzles: 9 Number of filling valves: 8 Bottle sizes included: 0.33 l - 0.75 l (with other set also 0.5 l) Electrical power: 6 kW, 400V, 50Hz Dimensions Width: 1,400 mm Length: 3,200 mm Complete length with labeler: 8,800 mm Operating hours: 1,370 hours Complete documentation available Capper | Arol | TSI-Eagle C | 2016 Pitch diameter: 410 mm Number of heads: 1 Type of closure: Standard crown cork Complete documentation available

Overview  This complete 1,500 L brewhouse system was manufactured by Spanish company Inox GC. It includes a three-vessel hot side, a 2,000 L mash/whirlpool tun, a 2,500 L lauter tun, and a 1,800 L hot water tank. The brewhouse comes with pumps, heat exchanger, CIP features, and a new AEM automatic gas burner for heating. The equipment is in good condition. Technical data Brewhouse System – Inox GC (1,500 L) Capacity per batch: 1,500 L Vessels: HLT, mash/lauter tun, kettle/whirlpool Material: AISI 304 stainless steel Heating: Compatible with automatic gas burner Includes: Temperature control panel, integrated pumps Isothermal Mash & Whirlpool Tun (2,000 L) Capacity: 2,000 L Insulation: 50 mm rock wool Features: Hinged lids, agitator with VFD, CIP system, PT100 probe Isothermal Lauter Tun (2,500 L) Capacity: 2,500 L Features: 5° sloped bottom, 500 mm manway, German V-screen, automatic  ...

Overview  This fermentation tank package was manufactured between 2012 and 2019 by Oxinox and Slowbeer. It consists of isobaric and atmospheric stainless-steel fermenters with different capacities. Personal inspection is possible. Technical data  Total tanks: 8 units Isobaric tanks: 5 units Atmospheric tanks: 3 units Material: Stainless steel (316-L for Oxinox tanks) Scope of Delivery  Isobaric Fermenter (4x) | Oxinox | Oxi-19 | 2019 | 1,600 L each Atmospheric Fermenter (3x) | Slowbeer | Plano 1200L | 2012 | 1,200 L each Isobaric Fermenter | Oxinox | Oxi Clooper | 2016 | 1,400 L  

OVERVIEW his TecnoBodega Ingeniería / TB Ingeniería C1EL self-adhesive labelling and capsule machine, manufactured in 2022, is designed for the application of front labels, back labels, tax stamps and capsules on bottles. The machine is suitable for compact bottling lines in wine, spirits, liqueur and beverage production. The machine is equipped with 3 labelling heads and can process bottle formats with a height range from 140 to 370 mm and a diameter range from 50 to 100 mm. It works with paper self-adhesive labels and supports label sizes from 40 to 105 mm in length and 18 to 150 mm in height. The system includes a bottle transport conveyor, infeed timing screw, independent self-adhesive labelling heads, capsule distributor and capsule application unit. It also features automatic speed regulation according to bottle flow and integrated machine safety systems. The machine is built in  ...

Overview  This diatomaceous earth filter was manufactured in 2013 by Spadoni (Italy) and later adapted by In.VIA (Spain). The mobile filtration unit is equipped with an integrated pumping and control system for fine filtration with diatomaceous earth. It is on sale because the owner upgraded to a newer model. The filter is in good condition and available immediately. Technical data Capacity: Approx. 80 hL/h Filtration system: Diatomaceous earth Tank: Pressurized stainless steel Pump 1: OBL MHBN100PP, 100 l/h capacity, 10 bar max pressure Pump 2: EBARA 2CDX/E 120/30, stainless steel liquid transfer pump Valve system: Stainless steel, precise flow control Design: Mobile filtration unit with integrated control system

Overview The micro brewery was manufactured in 1999 by theGerman manufacturer BERAPLAN. All equipment is in good condition. A new wort copper was added in 2018.  List of equipment: 1. Mash Tun Made by Beraplan in 1999 Cylindric shape with conical ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1600 mm Height conical part: 20 0mm Volume: maximum 38 Hl Double sidewall Insulation Heated by steam, which can be regulated Hot and cold water inlet at the bottom Can be emptied through the bottom 4 CIP balls PT100 2 agitators Mach pump with variable speed drive 2. Lauter Tun Made by Beraplan in 1999 Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1200 mm Volume: maximum 37 Hl Filtering ground with trapezoidal perforations High precision valve to regulate the flow rate Hot and cold water inlet at the bottom 4 CIP ball ...

Overview This tray former and case sealer packaging module was manufactured in 2016 by Denmark SOCO SYSTEM A/S. The system consists of an automatic tray former and a case sealer designed for fully automated carton handling in packaging lines. The tray former erects flat carton blanks into trays, which are transferred via conveyor to downstream processes, while the case sealer applies self-adhesive tape to close cartons after filling. Technical data  Capacity: 12 – 14 cycles/min (tray former) Application: Carton forming and sealing Configuration: Automatic tray former with pneumatic forming system and automatic case sealer with tape sealing Utilities: Voltage: 3 × 400 V Frequency: 50 / 60 Hz (tray former), 50 Hz (case sealer) Air consumption: approx. 31.3 Nl/cycle (tray former), approx. 0.6 Nl/cycle (case sealer) Air pressure: 0.6 – 1.0 MPa Rated current: 2 A (tray former), 3  ...

Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers, including SIG Corpoplast, KHS, Sacmi, Kisters, Paxona, and others. The line is suitable for still and carbonated soft drinks and includes a blow moulder, filler, labeller, packer, and various conveyor and inspection systems. The line reaches up to 36,000 bph at 1.5L and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  Capacity: 36,000 bph at 1.5L water 35,000 bph at 1.5L soft drinks (sweet) 32,000 bph at 1.5L soft drinks (light) Formats: 0.5L and 1.5L bottles PCO 28-1881 closure Filling product: Water and carbonated soft drinks (7.5g CO₂) Closure system: Screw caps, fed via chute and tipper (Zalkin + NSM) Packing: Shrink pack: 3x2 bottles (double lane) Pallet type: Eur ...

Overview  The filler + capper block was manufactured in 2021 by the German company ALWID. It is part of a new filling line and can fill chemical products into plastic containers. The machine has ATEX certification, which allows it to process explosive products. The machine can be purchased with warranty.  Technical data  Fully automatic rotary filler Filling system: mass flow meter system, type: Endress+Hauser LPG MASS Number of filling stations: 16 filling stations Max. container dimensions: Height: 50-300 mm, Ø: 20-100 mm Pressurized feed tank for constant flow through flow meter  Below level filling to avoid foam formation during filling  Adjustable bottle neck centering  Electr. level measurement  CIP capable  Designed for riser pipe processing Fully automatic round capper Number of capping heads: 5 With torque adjustment via slip clutches With fully automatic cap sorting an ...

Overview  This cold glue labelling machine was manufactured in 2004 by German company KHS. The machine was running until January 2025 and is now stored in the company. The labeller has a camera system for the orientation of the labels in the neck area for swing-top glass bottles. Technical data  Capacity: Up to 26,000 bottles per hour Working direction: anticlockwise Formats: 330 ml Longneck glass bottles 330 ml Steinie glass bottles 330 ml Swing-top glass bottles 500 ml NRW glass bottles Label positions: Front (up to 2 labels) Back (up to 1 label) With a Siemens S7 control New HMI touch panel in 2019

Overview  This filling line for non-carbonated beverages in PET bottles was manufactured in 2011 and comprises a filtration system, a filling and capping machine, a labeling machine and a pallet wrapping machine. It is designed for bottle sizes from 1.5L to 5L. The line is being sold as the factory has been closed. All machines are professionally stored and can be inspected on site. Technical details  Filtration system | GYM Internacional | 8000 | 2011 Manufacturer: GYM Internacional Model: 8000 Year of manufacture: 2011 Capacity: 8,000 L/h Power consumption: 4 kW Dimensions: 2,500 x 1,500 x 100 mm Weight: 1,110 kg Bacteriological filtration through housing system Automatic filling monoblock | GYM Internacional | Grupo 9-1. PK | 2011 Bottle formats: 1.5L & 5L PET Output: 1,600 bottles/hour (1.5L) 700 bottles/hour (5L) Filling heads: 9 Capping heads: 1 (screw cap) Bottle diameter: Min.  ...

Overview  This PET filler was manufactured in 1999 by Germany-based KRONES. It is suitable for filling carbonated soft drinks in PET bottles and is equipped with a Pick&Place neckhandling system. The machine is immediately available and can be inspected upon request. Technical data  Capacity: 27,000 b/h at 1.0l PET 25,000 b/h at 1.5l PET 22,500 b/h at 2.0l PET Formats: 1.0l, 1.5l, 2.0l PET bottles Closure: PCO 1881, plastic screw caps Filling system: Isobaric Number of filling valves: 126 Capper: Screw capper 720-18-126 (Alcoa) Running direction: Right-Left (anti-clockwise) Neckhandling with Pick&Place-System Product: Carbonated soft drinks (8 g/l CO₂, 20°C) Machine pitch: 144 Machine safety: Full guarding – lifting version Control Unit: Siemens S7 Accessories: Krones Checkmat Scope of Delivery Krones Sensometic VP-I-PET filler Screw capper by Alcoa (720-18-126) Krones Checkmat Pi ...

Overview These fermenters (iso tank) were manufactured in 2018 by Germany BrauKon GmbH. The equipment consists of 3 fermenters, designed for beer fermentation. The tanks are still installed and connected to energy and are available immediately. The equipment can be visited in production on request. Technical data  Capacity: 10 hl each Application: Beer fermentation Configuration: 3 × iso fermenters  

Overview This high-performance can filling line was manufactured in 2013 by KHS and is designed for large-scale beverage production, particularly beer in aluminum cans. With a capacity of up to 48,000 cans per hour (500 ml), the line represents a modern, high-speed solution including depalletizing, filling, seaming, pasteurization, inspection, packaging, and palletizing. The core of the line consists of a KHS Innofill DVD 92 volumetric filler combined with a Ferrum F708G high-performance seamer, ensuring precise filling and reliable closing at maximum output rates. The line has been well maintained and remained in production until February 2026, and is available from Q1 2026. The overall installation features a compact, high-density layout with advanced conveyor and process integration, typical for modern KHS canning lines. Technical Data Capacity: 48,000 cans per hour (500 ml) 41,000 ca ...