máquinas de soldagem usadas para venda (1,829)

Fabricante / Tipo: MicroStep SPL-PA 6001.25 + S500 Área de processamento: 6.000 x 1.500 mm + eixo de 500 mm Unidade: servo drive DC sem folga dupla face Sistema de guias: Guias lineares Velocidade de posicionamento: até 44.000 mm/min Repetibilidade: de acordo com DIN 28206 / IRC 2500 Controle: MicroStep iMSNC incluindo painel de controle de toque e software Kjellberg HiFocus 160i Faixa atual: 10 – 160 A Tensão de funcionamento: 400V, 3~50Hz Potência: 33 kVA Gases: ar, oxigénio, azoto, árgon, hidrogénio Donaldson DFPRO 6 Cyclopeel – limpeza automática de filtros Eficiência de separação: 99,999 % a 0,5 μm Volume de extração: 4.500 m³/h Baixo ruído (< 75 dB(A)) Incluindo separador óleo/água e conexão de software

Soldador Fabricante: Merkle Tipo: HighPulse 552 RS Ano de Marca: 2019 Arrefecimento a água Alimentador de fios e lanterna incluindo fusível de encerramento Binzel

Corrente de soldadura a 25% ED máx.: 250 A Corrente de soldadura a 100% ED: 110 A Corrente de soldagem passo-a-passo. Ajustável: 5 - 250 A eletrizante. Conexão: 380 V Requisito de espaço: 650 x 600 x 1100/1500 mm de altura Peso: 55 kg

for sale is a MIG -MAG welding machine from Ess Schweißtechnik Bad Waldsee, HV 8534, Subject to prior sale, changes and errors!

Potência nominal: 63 kVA Projeção: 520 mm Espaçamento do braço do elétrodo: 200 mm Capacidade de soldadura em aço: aprox. 7 + 7 mm Desempenho de soldadura de metais não ferrosos: aprox. 2 + 2 mm eletrizante. Ligação: 380 V kW

Tipo de Máquina: Máquina de Solda Inversor TIG Sistema CC e CA refrigerado a água Faça Ess Tipo SquareARC 306 AC/DC Tensão de ligação 3 x 400 volts Faixa de ajuste 5 – 300 amperes Ciclo de trabalho 60% ED a 300 amperes 100% ED a 230 amperes Ajuste de corrente infinitamente variável espessura máxima do material soldável aço / aço inoxidável = 8 mm Alumínio = 5 mm Inversor de arrefecimento através de ventoinha incorporada Queimador de arrefecimento refrigerado a água Projeto de planta industrial móvel Fusível 16 amperes de sopro lento Dimensões L x W x H 950 x 435 x 980 mm Peso 120 kg Idade aprox. 10 anos estimada sem obrigação Oficina de condição testada, bom incluindo relatório de teste UVV Âmbito do sistema de soldadura de fornecimento com os seguintes acessórios: Tocha de soldadura TIG de 1 peça WHW 20/ ...

Working range X/Y: 1200mm/1600mm. Travel Z: 250mm. Max. table load: 80kg/m². Rapid traverse: 500mm/s. Machine dimensions X/Y/Z: approx. 2500mm/2000mm/1700mm. The machine is partially defective. On-site inspection is possible.

number: 70 Positionenweight: 90 kgcondition: neu : 28 mmWMT Set 7: 70-piece, 28mm system, consisting of:3x Pipe clamps D28 90° – Item No. 40283973x Pipe clamps D28 180° – Item No. 40283963x Pipe clamps D28 45° – Item No. 40283983x Pipe clamps D28 300x150 – Item No. 40283993x Pipe clamps D28 300x200 – Item No. 402840015x Ball lock pins D28x50 – Item No. 402766310x Locking pins D28x80 – Item No. 40288764x Universal Stop D28 100x50x25 mm – Item No. 40284694x Universal Stop D28 150x50x25 mm – Item No. 40284704x Universal Stop D28 225x50x25 mm – Item No. 40276572x Universal Stop D28 300x50x25 mm – Item No. 40276592x Stop Clamping Angle D28 75x50x75x25 mm – Item No. 40286572x Stop Clamping Angle D28 175x50x75x25 mm – Item No. 40286582x Stop Clamping Angle D28 175x50x175x25 mm – Item No. 40286492x Stop Clamping Angle D28 175x50x75x25 mm – Item No. 40286522x Stop ...

current intensivity: 200 Acapacity at 100% load: 150 A: 230 V: kVAweight of the machine ca.: 9,0 tdimensions of the machine ca.: 0,46 x 0,15 x 0,32 mTIG welding system- New- 3m hose package- Additional 8m hose package- Ground cable- Gas connection hose- DocumentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Precicut CNC laser precision machining system is available. 1) Fiber laser IPG Photonics YLR-150/1500-QCW-MM, year of manufacture: 2012, average laser power: 150W, pulse power: 1.5kW. 2) Collimator d25 f50, year of manufacture: 2012, focal length: 50mm, diameter: 25mm. 3) Coupling module for BAK 4, year of manufacture: 2012. 4) ProCom CNC300 control unit. Documentation available. On-site inspection is possible.

Oferta 05394 Especificações: - Dispositivo de extração de suor testado pela BIA - Braço de extração articular 3000 mm - Fluxo de volume de ar aprox. 1000 m³/h - Pressão estática máxima 2700 pa - Área do filtro aprox. m² - Controle de filtro - luz para troca de filtro - Eficiência de separação 99,9% - Conexão de ar comprimido 6 bar - Acionamento - Ventilador 400 V / 1,5 kW - Necessidade de espaço aprox. L 700 x A Mínimo 1800 x P 950 mm - Peso aprox. 250 quilogramas

Oferta 24587 Especificações: - Filtro eletrostático com luz indicadora - O ar extraído e purificado é devolvido à área de trabalho - Design de parede com dois braços de extração articulados - Comprimento do braço de sucção articulado aprox. 9000 milímetros - Fluxo de volume de ar aprox. 4700 m³/h - Área do filtro ativo 9,2 m² - Acionamento - Ventilador 400 V / 0,75 kW - Necessidade de espaço aprox. L 700 x A 1600 x P 550 mm - Peso aprox. 120 quilogramas

Número: 31 Posição: 22 mmEstado: neu Peso: 43 kgConjunto 1 33 peças, sistema de 22mm, composto por: Braçadeiras: 4 x 220610.1Braçadeiras 2 x 220630.1Parafuso: 12 x 220511Paragem: 4 x 220410.NParagem: 4 x 220420.NÂngulo: 2 x 220110.NÂngulo: 2 x 220152.NConjunto de acessórios. 1 x 223999Preço mais embalagem e transporte.

number: 96 Positionenweight: 600 kgcondition: neu : 28 mmSpecial set 96 pieces, 28mm system, consisting of:1x tool trolley30x quick release bolts with twist lock short, without O-rings8x universal stop 150 L - nitrided4x universal stop 225 L - nitrided8x stop and clamping angle 175 L - cast2x stop and clamping angle 500 G left - nitrided1x stop and clamping bracket 750 G left - nitrided1x stop and clamping bracket 750 G right - nitrided1x stop and clamping bracket 500 G left - nitrided1x stop and clamping bracket 500 G right - nitrided4x stop and clamping angle 300 G left - nitrided8x prism Ø60-135 ° burnished - with collarcomplete with screw collar and countersunk head16x professional screw clamps - nitrided6x Professional screw clamp 45 ° / 90 ° - nitrided4x universal stop 300 - nitrided1x accessory set consisting of:Eccentric, Allen key, brush, sharpening stone, Probe CleanBasic,  ...

table diameter: 1000 mmtable load: 1200 Kgswivelling range: 0 - 135 Gradturning speeds: 0,1 - 1,0 U/minheight adjustment: 1000 - 1450 mmmax. torque on the faceplate: 2000 Nmengine output: 0,75 / 0,55 kWwelding current: 500 Ampere- Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate.The D-HBE series comes as a standard version with a cable remote control and a footswitch.Welding power transmission for max.500Ampere.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 780 mmtable load: 1,0 tswivelling range: 0 - 135 Gradturning speeds: 0,15 - 1,5 U/mintable height adjustment: von 780 bis 1560 mmmax. torque on the faceplate: 1000 Nmwelding current: 500 Ampereincluding remote control and welding current transmission.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 33 Positionenweight: 52 kgcondition: neu : 28 mmSet 1: 33 pieces, 28mm system, consisting of:Clamps: 4 x 280610.NClamps: 2 x 280630.NPrism: 2 x 280648.1.NBolt: 12 x 160511Stop: 4 x 280410.NStop: 4 x 280420.NAngle: 2 x 160110.NAngle: 2 x 280152.NAccessory set. 1 x 283999Price plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 150 tworkpiece diameter: 1000 - 6300 mmdrum diameter: 500 x 300 mmfeed: 100 - 1000 mm/mintotal power requirement: 8 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 560 mmtable load: 0,3 tswivelling range: 0 - 90 Gradturning speeds: 0,25 - 4,0 U/min: 360 Nmwelding current: 500 Amperetotal power requirement: 0,4 / Hand kW• Self-locking gear, therefore no forward and backward at eccentric Load.• Electronic components from Schneider, Siemens and Delta.• Frequency-controlled stepless speed of the turntable.• High stability due to the robust construction.• welding power transmission• CE certificate.• Very good price / quality ratio.• The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1400 mmtable load: 5 tswivelling range: 0 - 135 Gradturning speeds: 0,05- 0,5 U/mintable height adjustment: von 1100 bis 1950 mmmax. torque on the faceplate: 7000 Nmwelding current: 700 Ampereincluding remote control and welding current transmission.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Número: 37 Posição: 28 mmEstado: neu Peso: 29 kgConjunto básico 1 37 peças, sistema de 28mm, composto por: Braçadeiras: 4 x 280604Parafuso: 8 x 280511Parar: 6 x 280420.NÂngulo: 2 x 280110.GParafuso roscado 8 x 280543Stop 8 x 160415Conjunto de acessórios. 1 x 163999Preço mais embalagem e transporte.

weight max.: 3000 kgworkpiece diameter: 20 - 1500 mmdrum diameter: 100 x 200 mmconnected load frequency: 230 Vtotal power requirement: 0,12 kWdimensions: 0,8 x 0,37 x 0,36 mspeed: 100 - 1000 mm/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 900 mmtable load: 3000 Kgweight of the machine ca.: 0,64 tdimensions: 2,4 x 1,2 x 0,9 mWelding table / hole table:Hole diameter: 28.3mmThe table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N(St 52/3)Plasma nitriding provides a hard surface layer.height adjustable from approx. 880 - 980mmBottom ribbed for reinforcement.including ground storageAccessories optional Surcharge for 25mm material thickness: 340, -EURThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 5 tworkpiece diameter: 100-2500 mmgear diameter: 250 mmgear width: 140 mmtotal power requirement: 0,8 kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: 2,0 x 1,4 x 1,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 10 tworkpiece diameter: 100 - 3200 mmdrum diameter: 300 x 120 mmfeed: 100 - 1000 mm/mintotal power requirement: 2 x 0,55 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 10 tworkpiece diameter: 100 - 3200 mmdrum diameter: 300 x 120 mmfeed: 100 - 1000 mm/mintotal power requirement: 2 x 0,55 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 850 - 900 mmweight of the machine ca.: 0,65 tdimensions: 2,4 x 1,2 x 0,95 mWelding table / perforated table:Hole diameter: 28mmThe table is made of 15mm thick, high-alloy steel S355 JR T=15The surface is untreated.Side panels 165mmBottom ribbed for reinforcement.Incl. floor bearingAccessories optionalSurface evenness 0.2 - 0.4mm over 1000mm.- with drawer unit- Grid shelf- Heavy-duty castors steerableWelding accessories shown not included!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mmtable width: 800 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 0,19 tdimensions: 1,2 x 0,8 x 0,85 mSiegmund workstation including 2 drawersPremium Light, through hardened tool steel X8.7,plasma nitrided and BAR coated.Drilling Ø 28 mm, drilling surface 100x100 mm grid.Material thickness approx. 15 mmWith the new workstation from Siegmund, you can create your ideal workplace in a modular system. The Siegmund Workstation can be individually adapted and expanded to meet your needs and wishes. Whether sawing, drilling or welding - the absolute all-rounder in every workshop!Consisting of:1x 004002 (Siegmund Workstation)1x 804004.X7 (perforated plate)1x 284030 (clamp holder)1x 004020 (shelf)1x 284035 (bolt and prism holder)1x 004025 (tool wall including shelf)2x 004210 (drawer)Spacer ring 800653.N is required for clamping with bolts 280510/280511. ...

number: 10 Stk.clamping range: 15 - 50 mm: 28 mmweight: 10 kgdimensions: 0,3 x 0,3 x 0,2 mBasic set 4 / 53 piecesfor table top thickness 15mm and 25mm6 pcs screw clamps14 pcs. quick clamping bolts2 pcs. universal stop 100mm6 pcs. universal stop 150mm6 pcs. universal stop 225mm2 pcs. universal stop 300mm6 stop and clamping angles 175mm4 stop and clamping angles 275mm2 pcs. prisms 60mm1 piece torch holder1 pc. Eccentric stop 100mm diameter1 piece perforated brush 30mm2 pieces separating lotion 500ml, on a natural, biological basis2 pcs. Welding table cleaner 500ml, on a natural, biological basisThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 106 Positionenweight: 283 kgcondition: neu : 28 mmSet 5: 125 pieces, 28mm system, consisting of:Ferrules: 14 x 280610.NFerrules: 10 x 280630.NPrism: 6 x 280648.1.NBolt: 36 x 160511Magnetic bolt 8 x 280740Stop: 12 x 280410.NStop: 12 x 280420.NStop: 4 x 280430.NAngle: 12 x 160110.NAngle: 2 x 280152.NAngle: 2 x 280162.NAngle: 1 x 280164.NAngle: 1 x 280165.NAngle: 1 x 280166.NAngle: 1 x 280167.NAngle: 1 x 280144.NAngle: 1 x 280146.NTrolley: 1 x 280910Accessory set. 1 x 283999Price information plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.