máquinas de soldagem usadas para venda (1,710)

Weight 14 kg, Dimensions 42 × 28 × 33 cm, Power source electric, Voltage/Frequency 220V/50Hz, No-load Voltage 55 V, IP-Code IP 21 S, Efficiency 85%, Cable length 2 meters, CE certifications, Model MIG300 Brand Kibani Auction-ID: A1-40417-210

unused Auction-ID: A1-40417-268

Electronic wire welding machine, model mig 400 -pl, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-44803-255

Auto-dimming welding helmet with test function, sensitivity and delay time infinitely adjustable Auction-ID: A1-40417-302

300 amps max. unused Auction-ID: A1-40417-148

Auto-dimming welding helmet with test function, sensitivity and delay time infinitely adjustable Auction-ID: A1-40417-301

Welding helmet model 2. This automatic welding hood is suitable for all welding processes. Viewing window size approximately 93x43 mm with UV and IR protection. Switches off automatically. Blackout degree infinitely adjustable from the outside from DIN 9 - 13. Filter switch-on speed: 1/25000 second, from light to dark. Response time filter 0.6 seconds, from dark to light. Fully adjustable bridle with washable sweatband. Works on solar cells and if necessary on AAA batteries, battery life approximately 4000 hours, including AAA batteries. CE approved. Auction-ID: A1-40417-191

Voltage 220V, inverter, output current 60 A max, never used Overall dimensions: 500 x 200 x 200 mm Weight: 2 kg Auction-ID: A7-44803-294

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 24400 €: 468.48 €: 3000 kg: 150 mm: 150 mm: 360 °: 135 kgm: 400 / 50 V / Hz: 1.1 kW: 1.1 kW: 1200 mm: 700 - 950 mmThe hydraulic positioners are available in standard sizes for load capacities from 1.000 kg to 3.000 kg.The frame is optimally designed for rotation and tilting operations.The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected.For heavy workpieces, the positioners are mounted to the floor.Tilting and rotation are controlled by steel gears.For safety, the positioner is equipped with a reduction gear that holds the table in the desired position.The rotation speed can be adjusted via a potentiometer.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Welding helmet model 1. This automatic welding hood is suitable for all welding processes. Viewing window size approximately 93x43 mm with UV and IR protection. Switches off automatically. Blackout degree infinitely adjustable from the outside from DIN 9 - 13. Filter switch-on speed: 1/25000 second, from light to dark. Response time filter 0.6 seconds, from dark to light. Fully adjustable bridle with washable sweatband. Works on solar cells and if necessary on AAA batteries, battery life approximately 4000 hours, including AAA batteries. CE approved. Auction-ID: A1-40417-190

Electronic wire welding machine, model MIG 400-PL, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-44803-65

Electronic wire welding machine, model mig 400 -pl, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-44802-255

Auto-dimming welding helmet with test function, sensitivity and delay time infinitely adjustable Auction-ID: A1-40417-303

Voltage 220V, inverter, output current 60 A max, never used Overall dimensions: 500 x 200 x 200 mm Weight: 2 kg Auction-ID: A7-44802-243

Special set 93 pieces, 28mm systemincl. tool trolleyMaterial: burnished quality steelScope of delivery see picturesNumber 93 PositionsWeight 320 kgCondition newHole diameter 28 mmDimensions L x W x H 1.0 x 0.6 x 0.85 m Auction-ID: A7-44764-215

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mmweight: 980 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 900 mmtable load: 1.000 kgFrontal Loading Center (A): 150 mmSide Loading Center (B): 150 mmRotating speeds: 0,1 - 1,1 UpMT-slots: 6 x M16 Tilt Angle: 90-180-105 °Tilting Speed: 30 sn min./90°dimensions: 2100x920x1100 mmweight of the machine ca.: 930 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1000 mmtable height: 900 mmtable load: 3000 Kgweight of the machine ca.: 0,45 tdimensions: 2,0 x 1,0 x 0,9 mWelding table / perforated tableincluding accessory set WMT Basic-Set 2.0The table is made of 25mm high-alloy, plasma-nitrided steel S355J2+N (St 52/3)Surface hardness 850 VickersSurfaces that have been ground down and planed smooth.Hole diameter: 28mm, countersunk by 3mm100 x 100mm gridSide panels 200mmHole spacing in the side panels 50mm, diagonal gridHeight adjustable from approx. 830 - 890mmSubstructure reinforced with 140 x 15mm flat steelIncluding base bearings, 110mm diameterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mmtable width: 800 mmtable height: 980 mm: kgweight of the machine ca.: 0.95 tWorkstation- Hole diameter: 28 mm- Grid: 100 x 100 mm- Side panels: 150 mm- Panel thickness: 10 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 93 Positionenweight: 320 kgcondition: neu : 28 mmdimensions: 1,0 x 0,6 x 0,85 mSpecial 93-piece set, 28mm systemIncludes tool trolleyMaterial: Burnished high-quality steelScope of delivery: see imagesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 102 Positionenweight: 320 kgcondition: neu : 28 mmdimensions: 1,0 x 0,6 x 0,85 mSpecial 102-piece set, 28mm systemIncludes tool trolleyMaterial: Burnished high-quality steelScope of delivery: see imagesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 80 Positionenweight: 150 kgcondition: neu : 28 mmdimensions: 0,8 x 0,6 x ,05 mSpecial 80-piece set, 28mm systemMaterial: Burnished high-quality steelScope of delivery: see imagesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 10 Stk.clamping range: 25 mm: 28 mmweight: 10 kgdimensions: 0,3 x 0,3 x 0,2 m10 Quick-release clamping bolts- 28mm hole system- for 25mm table thicknessThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Set 1 - 33 pieces, 28mm system, consisting of:12x quick-release bolts with twist lock short, without O-rings 4x universal stop 150 L - Nitrided 4x universal stop 225 L - Nitrided 2x stop and clamping angle 175 L - Cast iron 2x stop and clamping angle 300 G left - Nitrided 2x prism Ø60-135° burnished - with collar complete with blade and countersunk head 4x Professional screw clamp - Nitrided 2x Professional screw clamp 45°/90° - Nitrided 1x accessory set consisting of: eccentric, Allen key, brush, whetstone, Probe CleanBasic, Probe non-stick and torch holder. Condition: never used / new (5) Auction-ID: A7-44764-128

Welding helmetProtection level 9 -13 MPower supply 2 x CR2032 Weight 460 gramsDimensions 250 x 270 x 230 mm Condition: never used / new (5) Auction-ID: A7-44764-167

Set 4: 110-piece, 28mm system, consisting of:Clamps: 14 x 280610.NClamps: 10 x 280630.NPrism: 6 x 280648.1.NBolts: 30 x 160511Magnetic bolts 8 x 280740Stroke: 10 x 280410.NStroke: 10 x 280420.NStroke: 4 x 280430.NAngle: 8 x 160110.NAngle: 2 x 280152.NAngle: 2 x 280162.NAngle: 1 x 280164.NAngle: 1 x 280165.NAngle: 1 x 280166.NAngle: 1 x 280167.NTrolley: 1 x 280910Accessory set. 1 x 283999Number 106 PositionsWeight 283 kgCondition newHole diameter 28 mm Auction-ID: A7-44764-159

Welding table \"SIGMUND Professional 750 + Plasma Nitrided\" is made of high-quality steel S355J2+N.Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm increments on the table top, parallel hole arrangement in 50 mm increments on the sides.Incl. basic foot equipment. Without accessories shown. Table length 2400 mmTable width 1200 mmTable height 850 mmHeight adjustment 50 mmMachine weight approx. 0.99 tDimensions L x W x H 2.4 x 1.2 x 0.9 m Condition: never used / new (5) Auction-ID: A7-44764-32

Siegmund workbenchPerforated plate made of high-quality steel S355J2+N + plasma nitriding- 16 mm hole- Holes in 50x50 mm grid- Material thickness approx. 12 mm- Height adjustable from 800 to 975 mm- Frame made of aluminium profilesTable length 1200 mmTable width 800 mmTable height 800-975 mmTable load 250 KgMachine weight approx. 108 KgDimensions L x W x H 1.2 x 0.8 x 0.85 m Condition: never used / new (5) Auction-ID: A7-44764-236

Workstation- Hole diameter: 28mm- Grid 100 x 100mm- Side walls 150mm- Table thickness 10mmTable length 1200 mmTable width 800 mmTable height 980 mmLoad capacity kgMachine weight approx. 0.95 t Auction-ID: A7-44764-10

Welding table on lift table: Hole diameter: 28mmThe table is made of 15mm thick steel S355The surface is stained and oiled.Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Sidewalls 150 x 10mmRibbed underside for reinforcement.Table length 1300 mmTable width 800 mmLoad capacity 1000 kgLifting height 510 - 1550 mmTotal connected load 1.5 kWConnected voltage 230 VMachine weight approx. 0.55 tCondition: never used / new (5) Auction-ID: A7-44764-27