máquinas injetoras usadas para venda (856)

Persico SMART LEO V2.8 Rotary Molding Machine (2022) The Persico SMART LEO V2.8 is a biaxial rotary molding machine for the production of high-volume hollow parts. It integrates the loading, heating, rotation, cooling and unloading steps in a single cycle. Temperature control is provided by sensors and software, ensuring consistent quality. Available in automatic or manual versions, this machine is ideal for the manufacture of tanks (gases, liquids), buoys, outdoor games or technical parts. Designed for high reliability, it can operate standalone or be integrated into a production line. Technical characteristics: • Manufacturer: Persico Engineering Division (Italy) • Model: SMART LEO V2.8 • Year: 2022 • Serial Number: 59416 SM • Power: 210–290 kW • Power supply: 400 V / 50 Hz / 3 Ph • Mould dimensions: 2800 × 1800 mm • Moulded weight: max. 1000 kg • Rotation: I-axis ...

Technical data Manufacturer: ARBURG Model: ALLROUNDER 1200 T 800 - 100 Serial Number: 209339 Year of manufacture: 01/2009 Operating voltage: 400 V / 3~ / 50 Hz Control voltage: 230 V / 50 Hz Control voltage (2): 24 V Rated current motor/heater: 60 / 11 A Total rated current: 71 A Total connection: 37 kW Country of manufacture: Germany Configuration Hydraulic injection moulding machine of the ALLROUNDER series Machine size: 1200 T Version: 800 - 100 Auction-ID: A1-46503-322

Clamping Force: 100 Ton Holding force: 110 Ton Maximum opening stroke: 380 mm Minimum mould height: 200 mm Maximum mould height: 430 mm Distance between plates: 610 mm Plate size: 600×600 mm Distance between columns: 420×420 mm Maximum weight supported: 700 kg Extraction stroke: 100 mm MORETTO receiver-hopper NOT included. WITTMANN granulate dispenser NOT included. SESOTEC metal detector NOT included. Screw diameter: between 25 and 35 mm - not accurately detected. Warning: the information reported has been taken from the manual and may not correspond to actual performance. For further information, on-site inspection is suggested. Approximate body dimensions: 4800×1900×2600 mm. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-46657-699

Clamping force: 200 Ton; piston closure; column passage: 520x520 mm; screw: 55mm; selogic control; Nr. 1 hydraulic jacks; Nr. 1 bellows; Euromap 12. Serial: 178453Estimated weight: 6700 kg Approximate dimensions: 5500x2000xh2200 mm Auction-ID: A7-46655-25

Clamping Force: 160 Ton Maximum opening stroke: 450 mm Mould height: between 250 and 550 mm Distance between plates: 1000 mm Plate dimensions: 795x795 mm Distance between columns approx.: 520 x 520 mm Maximum weight supported: 1110 kg on the moving plate. Extraction stroke: 200 mm MORETTO Receiver-Hopper NOT included. With WEMO manipulator With SESOTEC metal detector Screw diameter: between 25 and 35 mm - not accurately detected Warning: the information reported has been taken from the manual and may not correspond to actual performance. For further information, on-site inspection is suggested. Approximate dimensions of the machine body: 5700×1600×3500 mm. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-46657-697

Clamping force: 430 Ton; toggle closure; column passage: 760x680 mm; screw: 60mm; control B&R Columbia; Nr. 2 pneumatic jacks and 2 hydraulic jacks; Nr. 1 air blow; Euromap 12. Serial: 364-112Estimated weight: 19500 kg Approximate dimensions: 8200x1950xh2600 mm Auction-ID: A7-46655-26

Clamping Force: 100 Ton Holding force: 110 Ton Maximum opening stroke: 380 mm Minimum mould height: 200 mm Maximum mould height: 430 mm Distance between plates: 610 mm Plate size: 600×600 mm Distance between columns: 420×420 mm Maximum weight supported: 700 kg Extraction stroke: 100 mm WEMO manipulator NOT included. MORETTO receiver-hopper NOT included. WITTMANN granulate dispenser NOT included. SESOTEC metal detector NOT included. Screw diameter: between 25 and 35 mm - not accurately detected. Warning: the information reported has been taken from the manual and may not correspond to actual performance. For further information, on-site inspection is suggested. Approximate body dimensions: 4800 × 1900 × 2600 mm. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-46657-700

Injection Unit Screw Diameter: Ø 65 Injection Volume: approx. 1,075 cm³ Injection Pressure: up to 1,750 bar Injection Rate: approx. 400 cm³/s Plasticizing Capacity: approx. 85 g/s (PS) Nozzle Contact Force: 110 kN Clamping Unit Clamping Force: 5,500 kN (550 t) Clamping System: ENGEL Duo two-platen design Platen Size (H × V): approx. 1,350 × 1,300 mm Mould Opening Stroke: 850 mm Max. Daylight Opening: approx. 1,450 mm Min. Mould Height: 400 mm Ejector Stroke: 220 mm Ejector Force (fwd / back): 95 / 65 kN Drive & Control Drive Type: Hydraulic (pre-ecodrive generation) Hydraulic System Pressure: up to 160 bar Pump Motor Power: 45 kW Total Installed Power: approx. 65 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL EC88 digital control panel Equipment / Features Clamping System: Robust two-platen design for high rigidity and precision Platen Area: Large platen  ...

Injection Unit Screw Diameter: Ø 50 Injection Volume: approx. 392 cm³ Injection Pressure: up to 2,100 bar Injection Rate: approx. 200 cm³/s Plasticizing Capacity: approx. 30 g/s (PS) Screw L/D Ratio: 22:1 Nozzle Contact Force: 50 kN Clamping Unit Clamping Force: 1,900 kN (190 t) Clamping System: Zhafir Zeres all-electric with servo-hydraulic auxiliaries Platen Size (H × V): approx. 770 × 720 mm Mould Opening Stroke: 450 mm Max. Daylight Opening: approx. 900 mm Min. Mould Height: 200 mm Ejector Stroke: 150 mm Ejector Force (fwd / back): 40 / 30 kN Drive & Control Drive Type: Hybrid electric / servo-hydraulic (Zeres series) Connected Load: 45 kW Full Load Current: 76 A Short Circuit Current: 25 kA Power Supply: 400 V / 50 Hz / 3-phase Control System: SIGMATEK CNC-based control with Zhafir HMI touchscreen Equipment / Features Drive Concept: Hybrid Zeres system combining electric p ...

Injection Unit Screw Diameter: Ø 50 Injection Volume: approx. 490 cm³ Injection Pressure: up to 1,800 bar Injection Rate: approx. 350 cm³/s Plasticizing Capacity: approx. 50 g/s (PS) Nozzle Contact Force: 65 kN Clamping Unit Clamping Force: 2,600 kN (260 t) Clamping System: ENGEL Victory tie-bar-less design Platen Size (H × V): approx. 1,000 × 950 mm Mould Opening Stroke: 600 mm Max. Daylight Opening: approx. 950 mm Min. Mould Height: 350 mm Ejector Stroke: 150 mm Ejector Force (fwd / back): 50 / 30 kN Drive & Control Drive Type: Hydraulic Hydraulic System Pressure: up to 160 bar Pump Motor Power: 22 kW Total Installed Power: approx. 30 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL CC300 touchscreen control Equipment / Features Clamping Concept: Tie-bar-less design for improved mould accessibility and compact footprint Hydraulics: Energy-saving hydraulic  ...

Injection Unit Engine not working Screw Diameter: 65 Ø Injection Volume: approx. 1,025 cm³ Injection Pressure: up to 1,800 bar Injection Rate: approx. 450 cm³/s Plasticizing Capacity: approx. 80 g/s (PS) Nozzle Contact Force: 100 kN Clamping Unit Clamping Force: 5,000 kN (500 t) Clamping System: ENGEL Duo two-platen design Platen Size (H × V): approx. 1,300 × 1,200 mm Mould Opening Stroke: 800 mm Max. Daylight Opening: approx. 1,400 mm Min. Mould Height: 400 mm Ejector Stroke: 200 mm Ejector Force (fwd / back): 90 / 60 kN Drive & Control Drive Type: Servo-hydraulic (ecodrive inside) Hydraulic System Pressure: up to 160 bar Pump Motor Power: 37 kW Total Installed Power: approx. 55 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL CC300 touchscreen control Equipment / Features Clamping System: Two-platen design for high rigidity and space efficiency Energy Efficie ...

Injection Unit Screw Diameter: Ø 70 Injection Volume: approx. 1,540 cm³ Injection Pressure: up to 1,800 bar Injection Rate: approx. 500 cm³/s Plasticizing Capacity: approx. 95 g/s (PS) Nozzle Contact Force: 120 kN Clamping Unit Clamping Force: 6,500 kN (650 t) Clamping System: ENGEL Duo two-platen design Platen Size (H × V): approx. 1,600 × 1,500 mm Mould Opening Stroke: 900 mm Max. Daylight Opening: approx. 1,600 mm Min. Mould Height: 450 mm Ejector Stroke: 250 mm Ejector Force (fwd / back): 110 / 70 kN Drive & Control Drive Type: Servo-hydraulic (ecodrive inside) Hydraulic System Pressure: up to 160 bar Pump Motor Power: 45 kW Total Installed Power: approx. 65 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL CC300 touchscreen control Equipment / Features Clamping System: Two-platen design for compact footprint and high stability Energy Efficiency: Servo-hy ...

Injection Unit Screw Diameter: Ø 70 Injection Volume: 1,239 cm³ Injection Pressure: up to 2,000 bar Injection Rate: approx. 500 cm³/s Plasticizing Capacity: approx. 95 g/s (PS) Screw L/D Ratio: 22:1 Nozzle Contact Force: 120 kN Clamping Unit Clamping Force: 4,500 kN (450 t) Clamping System: Two-platen design (Jupiter II series) Platen Size (H × V): approx. 1,140 × 1,040 mm Mould Opening Stroke: 950 mm Max. Daylight Opening: approx. 1,650 mm Min. Mould Height: 400 mm Ejector Stroke: 200 mm Ejector Force (fwd / back): 100 / 70 kN Drive & Control Drive Type: Servo-hydraulic system Main Motor Power: 62 kW Full Load Current: 104 A Short Circuit Rating: 25 kA Power Supply: 400 V / 50 Hz / 3-phase Control System: Haitian KEBA touchscreen control Equipment / Features Clamping Concept: Two-platen system for space efficiency and high rigidity Energy Efficiency: Servo-hydraulic driv ...

Machine type: Injection moulding machine Manufacturer: ENGEL Model: Duo 3550/400 Pico Year of manufacture: 2013 Serial number: 191000 Clamping force: 400 t Clamping system: Two-platen Hydraulic system pressure: up to 160 bar Drive system: Servo-hydraulic ecodrive inside” Pump motor power: 30 kW Total installed power: approx. 45 kW Power supply: 400 V / 50 Hz / 3-phase Control system: ENGEL CC300 control unit Control features: Colour touchscreen, integrated process monitoring Equipment / Features: - Automatic central lubrication system - Safety interlocks on operator and service sides - Energy-efficient servo-hydraulic drive - Designed for large technical and automotive moulding applications Overall dimensions (L x W x H): approx. 6800 x 1900 x 2400 mm Own mass: approx. 11,000 kg Auction-ID: A7-46307-1

clamping force: 1500 kNinjection volume: 141 g/PSscrew diameter: 35 mmplaten size: 470 x 470 mmCondition: used,Specification: horizontal injection moulding machine, Type: Allrounder 470C 1500-400 GE GOLDEN EDITIONInjection unit:- Screw diameter: 35 mm (wear-resistant)- Centring ring diameter: 125 mm- Max. shot weight: 141 g (PS)- Injection pressure: 2,500 barClosing unit:- Clamping force: 1,500 kN- Max. opening stroke: 750 mm- Mould installation height: min. 250 mm- Mould clamping plates: 470 x 470 mm- Approx. operating hours: 79,000 h (still in use)- Operating voltage: 3x 400 V, 50 Hz- Nominal motor heating current: 75 / 40 A- Total current: 115 A- Total connection: 65 kW- Core pulls: 1x- Hot runner control points: 6x- Temperature control unit interfaces: ...

Electrical injection moulding machine manufactured in 2021. This ZHAFIR ZERES III 3000 / 830 / B5 features a clamping force of 3000 kN and a maximum mould opening stroke of 600 mm. It includes a platen size of 1040 x 1040 mm and a screw diameter of 50 mm. If you are looking to get high-quality injection moulding capabilities, consider the ZHAFIR ZERES III 3000 / 830 / B5 machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2007. This Engel Victory VC1800/300 P features a clamping force of 3,000 kN and an opening stroke of 900 mm. It includes a robust control system with a 15 TFT touchscreen and a maximum injection pressure of 1,735 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory VC1800/300 P machine we have for sale. Contact us for further details. Identical Engel Victory VC 1800/300P (2008 model) also for sale — same configurations.

This Engel Insert 80V/40 was manufactured in 2011. A vertical injection moulding machine, its ideal for precision thermoplastic parts. Consider the opportunity to buy this Engel Insert 80V/40 vertical injection moulding machine. Contact us for more information.

This Husky HPETL230E-RSE95D-95 was manufactured in 2015. It is an all-electric injection molding system with a maximum throughput of 390 kg/h PET and a max shot weight of 2424 g PET. The clamping unit is fully electric with a toggle drive, and it features an integrated control system for additional equipment. Consider the opportunity to buy this Husky HPETL230E-RSE95D-95 electrical injection moulding machine. Contact us for more information about this machine.

Key data: 6500 kN, 105 mm

Localização é : América Latina

Key data: 20000 kN

Angebot/Oferta: Engel Duo 17060/2000 Robô Viper 60 aprox. 4900h Ano 2021

Key data: 4000 kN, 80 mm

Máquina + Robô Viper 12

Key data: 5000 kN

Oferta(4x): Engel Duo 1800/500 BJ./ANO 2016 38500h

Key data: 7000 kN, 40 mm

Engel E-DUO 740H/740L/700 combinado BJ./ANO 2017 aprox. 3871 hrs/h Visão geral da máquina: Força de fixação: 7000 kN Diâmetro do parafuso: 40 mm Velocidade do parafuso: 300 rpm Curso de dosagem: 200 mm Controlo: Engel CC300 Peso: 22 toneladas Horário: 3871 horas Caraterísticas: Gira-discos elétrico de 6 estações Ajuste elétrico rápido para o curso da placa da máquina Duas unidades de injeção, cada uma com parafuso de 3 zonas (D45 mm) 32 zonas para controlo de corredores quentes Unidades elétricas de plastificação Documentação completa incluída Estado: Pronto a utilizar (utilizado) Horário: 3871 Estado da máquina: Já desmontada Defeitos ou peças em falta: Sem defeitos conhecidos, com manutenção regular Documentação técnica: Completa e disponível (pode ser consultada no local)

Key data: 20000 kN, 135 mm

Dosagem 1: Plastificar 1: Diâmetro do parafuso mm 135 Diâmetro do parafuso mm 120 | Artigo 135.º | 150 Curso de dosagem Curso de parafuso mm 610 Capacidade máxima de injeção cm3 6899 | 8731 | 10780 Velocidade do parafuso min-1 125 Torque de minhoca Torque de parafuso Nm 14000 Velocidade máxima do parafuso torque reduzido min-1 135 Velocidade máxima do parafuso de binário reduzido Nm 12963 Velocidade de parafuso reduzida, torque máximo do parafuso, min-1 112 Torque máximo do parafuso velocidade do parafuso reduzida Nm 15630 Desempenho de plastificação (3 zonas) 1.2 Taxa de recuperação (parafuso de 3 zonas) 1,2 g/s 165 | 222,9 | 231,3 Desempenho de plastificação (barreira) 3 Taxa de recuperação (parafuso de barreira) 3 g/s 208,3 | 279,2 | 264,6 1) Valores para poliestireno até a unidade de injeção 2550 de acordo com ETR 10100 1) Dados para GPPS até a un ...

Key data: 4200 kN

Máquina em produção !1

Máquina de moldagem de injeção de anjo velha

máquina em stock !

com parafuso suplente, mangueira de alta pressão e várias peças sobressalentes - ver imagens

várias peças sobressalentes incl.