máquinas para produtos farmacêuticos e cosméticos usadas para venda (368)

Bomba centrífuga, entrada/saída 51/51mm, motor ABB Motors 4kw 1420 rpm 20m3/h

Bomba centrífuga, motor 1,5kw, impulsor tamanho 160mm, máximo 18bar 55m3/h, 2800rpm, entrada/saída 65/51mm

Tamanho do impulsor 130mm, máximo 18bar, 33m3/h 2800rpm, entrada/saída 51/51mm

Unimix SRC1600 vaso de processamento a vácuo (vaso -1/2bar, 133C, capacidade total 2145Ltr, capacidade de trabalho 1600Ltr; camisa 4bar, 151c, 130Ltr., fundo difundido, elevação hidráulica para abrir o topo, com EKATO S-Jet Homogeneizer SJ 1000 SO EX no fundo do tanque (380 V, 18kw, 3000rpm, novo 2009), agitador/raspador de âncora (novo 2022) com motor ATEX PTB no topo (380'V, 13,5kW), , bomba de vácuo Elmo Rietschle L300 2BV5111 incorporada no interior do corpo principal, pressão de trabalho -1/+3bar, tamanhos exteriores do reator 1950x2300x2900 de altura (incluindo motor), montada na estrutura (tamanho do chão 2200x3300, altura da estrutura 300mm), material em aço inoxidável, novo software operacional 2022, o reator ainda está em uso para produção de cosméticos, Ano de construção do vaso principal 1992, todos os dados de recondicionamento disponíveis. A um preço redu ...

YSTRAL InLine Mixer Conti TDS-3, potência 15 kW, 3000 rpm, temperatura máxima do líquido para mistura 135ºC, motor elétrico PTB 98 ATEX 1106, incluindo armário de potência, controlo de frequência e controlo de operação. A máquina está em condições de funcionamento, utilizada para produção de cosméticos. A um preço reduzido comparado com o novo. Pronto para envio. Está convidado a inspecionar a máquina em Tallinn. Informação detalhada disponível mediante pedido.

ADMV Alimentador de tubo A máquina tem sido usada como um alimentador de tubo de rímel Painel de controlo Siemens

Alimentador de tampas para vários tipos de tampas, tubos, pequenas garrafas, etc. Weckerle Kappen B Aço inoxidável Ano 1998 2 pc disponíveis

GRACO pneumatic pump, Max Flow: 9.5 L/MIN / 2.5 GPM, Max Air WPR: 1.2 MPa / 12 bar / 180 PSI , Max Fluid WPR: 6.2 MPa / 62 bar / 900 PSI

Disinfecting washer for laboratory., Upper basket for injection, Lower basket, Maximum cold water temperature (°C): 20 °C , Maximum hot water temperature (°C): 70 °C , External dimensions (mm): 730x900 H 845 , Interior dimensions (mm): 500x540 H 600

Ventilated safety cabinet with KOTTERMANN brand tray retention, Total retention volume 21.3 litres, With doors equipped with a cylinder to lock the doors open or to close them automatically., To connect to a centralized suction system via two DN70mm air inlets, 3 fixed shelves with retention:, - 1 shelf unit 385x515 H 220 mm (retention volume 5.8 Liters), - 1 shelf unit 385x515 H 220 mm (retention volume 5.8 Liters), - 1 shelf unit 285x1010 H 275mm (Retention volume 9.7 Liters), External dimensions (mm): 570x1200 H 745 mm

Motorized curved stainless steel belt conveyor, Width of strip 100mm, Adjustable feet in height up to 150 mm, Motorized conveyor: Yes, Conveyor belt width (mm): 90 , Maximum working height (mm): 1055, Electric: Motor: SEW-USOCOME: 230 V / 50 Hz / 0.55 kW

METTLER TOLEDO weigher feeder of type XS1, From left to right, Balance model: METTLER TOLEDO Type: BF2-L-P, Max weighing range (g): 100 g, Mini weighing range (g): 5 , e:: 0.01 g , d :: 0,01 , T=- :: 90 g , Dimensions (mm): 900x700 H 174 mm , Conveyor belt width (mm) :: 100 mm , Balance belt width (mm) :: 57 mm

ZALKIN capping machine, Type TM3

Vertical VAI packaging machine with dosing screw for powder., Sold with its platform and format., Pouch, Stopped in December 2025, Electrically renovated in SIEMENS S7, Mini format bag (mm): 40x30 h , Maxi format sachet (mm): 270x380 h , Cadence (bpm): 60, maxi format sachet (mm): 270x380 h , Elec: 380 V , Machine dimensions (mm): 2030x132 H 1670 , Platform (mm): 1810x180 H 2900 , Power (kW): 4

Security cabinet with forced ventilation from the KOTTERMANN brand, Ventilité tested and functional (230Volt), to be connected via a DN70 outlet, 3 shelves with mobile drawers and containment bins:, - 500x435 H 295 mm (volume of the tray 12 Litres), - 500x435 H 215 mm (volume of the tray 12 Litres), - 500x435 H 285 mm (volume of the tray 12 Litres), 1 fixed shelf, - 210x555 H 240 mm, Elec: 230 V / 50 Hz / 15 Watt , External dimensions (mm): 530x1200 H 720

Motorized belt conveyor., Motorized conveyor: Yes, Conveyor belt length (mm): 3000, Conveyor belt width (mm): 500 mm , Working height (mm): 390 mm , Electric: GYROS: 230 / 400 V / 50 Hz / 1.45/ 0.84 A / 0.25 KW , Speed variation: Yes

Pneumatic dimensional measurement device Solex Metrology, PNEUMATIC VERSION, Pneumatic metrology is a dimensional measurement technique for parts, presenting two important advantages:, - the great measurement precision, - measurement speed, This device is used for dimensional control of parts with holes whose dimensions must comply with very tight tolerances, parts that cannot be touched due to their surface condition, or parts with complex geometry., It has thus been present for many years in industrial sectors such as biomedical (prostheses), cosmetics (sprays), pharmaceuticals (dosing pumps), aerospace or automotive (mechanical parts), where it is recognized for its robustness, reliability and very high measurement precision., PRINCIPLE OF OPERATION, The principle is based on a pneumatic flowmeter that operates by direct reading of the drop or rise in pressure corresponding to the cha ...

Motorized vertical test bench IMADA MV-100BA., Dynanometer Chatillon:, 100 x .05 Lb, 50 x 05 Kg, 500 x .5 N

Ventilator, BINDER CO2 incubator, Volume 150 litres, 2 shelves, Internal dimensions (mm): 490x495 H 595, external dimensions (mm): 820x757 H 1175, Number of shelves: 2, Elec: 230V / 7.4 A / 50 Hz , Maximum temperature (°C): 60

GLATT coating turbine, Glatt GC 750/500 enrobing machine from 1994 with interchangeable drums, explosion-proof version (Ex), - Processing equipment: Glatt GC 750 Coater (equipment used only for testing), - Perforated drums (diameters 500 mm and 750 mm) with:, Air intake and discharge housings for both drums, Drum capacity 750 mm: 50 – 75 kg/batch, Drum capacity 500 mm: 15 – 45 kg/batch, - Manual unloading, - Spray arm with nozzle adapter, Spraying system with 1 Schlick nozzle, - Control cabinet (pneumatic/electric) with Siemens S5 PLC, - Air handling unit (AHU) 7AIR comprising:, - Inlet air fan, - Filtration F7 and H12, - Preheating, - Dehumidification, - Heating, - HERDING Dust Collector, - Outlet air fan, - WIP spray nozzle (in-place cleaning) inside the drum and external nozzle, Elec: 3x400 / 24VDC / 50Hz , Useful volume: 500mm: 15-45kg 750mm : 50 - 75kg , Spray nozzles: X, ...

Laser marking Marken Imaje Smartlase 130x

Removal of label from the top with label dispensing system AVERY type ALX734LH, Sold with its stainless steel mast., Labeler / Stickerer AVERY DENISON type ALX 734LH :, - Printing speed: 50 to 400 mm/s, - Print width: 104 mm max, - Ribbon width: 20-140 mm, - Label production: Up to 400 labels, - Label width: 30 to 134 mm, - Label length: 25 to 225 mm, - Chuck diameter: 38.76,102 mm, - Roll diameter: 300 or 400 mm, Minimum label deposition height (mm): 1225, Maximum label deposition height (mm): 1400

Motorized curved stainless steel belt conveyor, Width of strip 100mm, Adjustable feet in height up to 150 mm, Motorized conveyor: Yes , Conveyor length (mm): 700mm, Conveyor belt width (mm): 90mm, Maximum working height (mm): 1050mm, Electric: Motor: SEW-USOCOME: 230 V / 50 Hz / 0.55 kW , Speed variation: no

The ZANASI 40 E model is a reciprocating motion machine designed for the processing and filling of two-piece hard capsules, as well as their sequential closing and ejection., Possibilities for powder dosing as well as granule dosing., Several powder formats available:, Full format:2,4, Cadence / hour: 40 000 capsules/hour , Positions: 6 , Machine absorption (Kw): 2.2 kW , Elec: 380 V / 50 Hz / 14.2 A

Markem Imaje UI 100 control panel., Connects to a MARKEM laser marking system

Dissolution tester SOTAX CE70., SOTAX CY 7-50 Pump, Sold with accessories., Positions: 7 , Elec: 230 V

Rimek Compressor, 10 stations, 6 tons of compression, For B-type tooling, Maximum diameter of tablets 16mm, Maximum filling 17mm, Maximum rate 18 000 tablets / hour, Number of revolutions per minute: 30, Sold with several formats:, round diameter 6 mm incomplete (1 die missing)., round diameter 7 mm complete, round diameter 12 mm complete, oblong diameter 18x7 mm complete, Elec: 230 V / 50 Hz , Dimensions (mm): 563x530, Cadence / hour: 18000, Number of revolutions/min: 30, Compression (kN): 6 tons , Maximum tablet dimensions (mm): 16, Maximum powder filling height (mm): 16, Machine height with hopper: 1565, Machine height without hopper: 1535, Format sold with the machine: Yes

High-pressure reservoir, Capacity (in L): 20 L, Max pressure (in Bar): 6,9 Bar, Maximum temperature (in °C): 121 °C, Capacity: 20 L, Dimensions (mm): ⌀ 230 mm, Height (mm): 640 mm, Max temperature (in °C): 121 °C

Gellulier LGA, Machines for filling 100 capsules with vibrator., Current format: size 2., Dimensions (mm): 355x260 H 210

Gelulleuse MACOFAR for CD20-type powder, Sold with 3 powder formats: 00, 0 and 1, Maximum theoretical speed: 20 000 / hour, 50Hz / 2.5kW, Net weight 800kg, Sold with its vacuum pump, Elec:: 3+N+P, Link to manufacturer: .romaco/products/product-details/cd-series