outras máquinas para plástico usadas para venda (521)

Costarelli inclined Conveyor Belt, Sturdy and reliable construction, Dimensions 5.300 x 950 mm, adjustable height (now loading 500 - discharging 1.600 mm), 1,5 kw motor, PVC carpet with drive lugs, 800 mm pitch, 200 mm roller diameter, 650 mm sidewall height, Constructed in 2001, very good working conditions, working width: 950 mm wide x 5,3 mt.long, conditions: used, checked, type: inclined

Amut Vertical centrifugal dryer under efurbishing, mm.400 rotor diameter,, length mm.1.900 mm.,, 120 mm.long paddles on the whole length,, AISI 304 steel basket from diam.mm.650,, height : 1.975 mm., mm.3,0 holes,, self-cleaning system through water sprays., Rolling type bearings., 55 kw, 1.550 tpm engine., About 1.000 kg./hr. with film and depending on material and water content, Construction year 1998., Machine is offered totally reconditioned, feeding auger and discharging cyclon can be quoted on request, See how a similar machine was refurbished, [here](.germanplast/pages/photo-gallery#&gid=1&pid=2), installed power - used power in work: about 60-65% : 55 kW, availability: 5 weeks ca, options available: loading auger à discharging cyclon, capacity: 1.000 kg/h with film ,more with rigid plastics, depending on material and water %, conditions: refurbished, type: Vertical

HOT MICROPERFORATOR, Maximum working width 1.200 mm, Total roll width 1.300 mm., Maximum working speed 80 mt./min, Inner Ø 118 mm., Fitted with n.12 x 100 mm.bronze needle holding pieces, Nr.9 needles/sqcm, needle Ø 1,42 mm. (or bespoke to project),, 380 V 3Ph+N+E 50 Hz., Electric panel with digital thermometer to pre-set the working temperature, You can select the temperature on the different heaters (central and side), Pneumatic system to open/close the perforating roll., Roll rotation when in stand-by posittion, to avoid material overheating, Easy replacimg counter-roll in organic bristle., Micro-metric adjustment of needles pressure in work, The needle-holding roll can be very easily replaced to a different needle pattern., conditions: new machine, type: Hot microperforator for plastic films

WATER COOLING TANK, for strand pelletizers, Constructed in AISI4304 stainless steel, On 4 wheels (2 with brakes), Overall dimensions : LxWxH 2,5 x 0,5 x 1,0 mt., tank : LxWxH 2,5 x 0,5 x 0,25 mt.

Vertical mixer, 8000 lt., Power 11 kw, Year 2004

PLASTIC WASHING. LINE for GRAVIMETRICAL SEPARATION, including:, collection hopper, auger, STAINLES STEEL GRAVIMETRICAL SEPARATION TANK, size mm.5.800 x 1.600 ca, n.4 moving rolls, sinking screw, drained screw for collection of floating material, n.2 additional sinking screws, lifting screw for sunk material, n.2 TECNOFER CENTRIFUGAL DRYERS in sequence, 18,5 kw, 720 x 1.500 mm, connection screws, collection hopper, sucking unit, The line is offered as is, where is, Vertical mixer available separately, capacity: ca.500 kg/h depending on material and contamination

WASHING LINE for PLASTIC SCRAPS, for 350-550 kg/h average capacity depending on contamination and material, material loading screw conveyor with hopper, equipped with vibrating motor, made of stainless steel, stainless steel tank size 5,0 x 1,5 x 2,0 mt. complete with 2 horizontal skimming screw conveyors for material handling. 8.2 kW, 50 Hz., horizontal screw conveyor at the bottom + diagonal screw conveyor for extracting sunk material, stainless steel safeti grate on the upper part, diagonal material collection drainage screw conveyor, drying centrifuge, material extraction fan, electrical panel, the line was built in 2008 and is offered completely reconditioned

USED VERTICAL MIXER, 24 m3 capacity, total height approx 5.400 mm including transmission group + cyclon, max Ø 2.800 mm., constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower loading hopper with safety grid and sampling shutter,, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, electric voltage: 400 V, 50 Hz,, conditions: good working conditions, availability: immediate, width: 2800 mm. special transport

n°1 Máquina de solda de PVC Balacchi BR4SSB Ano 2004 -n°1 Balacchi BR12PT Máquina de solda PVC ano 199

USED VERTICAL MIXER, constructed in sturdy carbon steel, Total height 3.400 mm., Diameter 1.300 mm., Legs 2.150 mm., Barrel height 1.250 mm., Cone height 750 mm., inner screw 180 mm. diam., Nominal capacity 1.800 lt.ca, side discharging pipe, Discharging point 860 mm. from floor., hatch on barrel mm. 500 x 700, 1,5 kw drive, installed power - used power in work: about 60-65% : 1.5, capacity: 1800 lt.

BA.S.FF. AUTOMATIC 3,0 mt.LONG BAGS MAKING MACHINE, Type HORUS 1100, construction year 2002, working width 1.100 mm., n.2 reel holders, folding unit, for bags with min/max length 300/3.000 mm., linear speed 120 m/min, FINAL PRODUCT: 3 m.long bags, matress bags and such

PALLMANN AGGLOMERATOR PFV 250/20, Average thrpughput rate depending on materials - see pdf below, Including :, AGGLOMERATOR PFV250, n.2 disks Ø250 mm., It has been working with with PET and PS -possible different die on request, HOT MELT GRANULATOR, PS-HG 400x500, constructed in Stainless steel,, granulatiojn chamber mm.500 x 400, Screen size 10 mm, water cooled, Rotary air lock (PZSL 2.0 G), pneumatic system ro separate fines, Fan conveyor system, Storage bin PFST, Control cabinet, Voltage 415 -3Ph-50Hz, Constructed in 2001, this line is offered reconditioned., Possible addition of first granulator, on separate request, capacity: around 300 kg/h with PET and PS

FBM PLASTIC AGGLOMERATOR USED, RECONDITIONED, for film, fibers, flakes of LDPE LLDPE HDPE PP PA PS EPS, etc, Average output 200-400 kg/h depending on materials and moisture content, Including LOADING BELT with side walls to feed the machine 1.000 mm. diam.steel barrel, complete with vacuum vent prepared to convey steam into an exhausting steam system (not included), sturdy steel rotating and fixed knives on bottom of the barrel, 110 kW, Hp 150 main engine,, side hatch, with safety device, for inspection and knives replacement, Grease lubricating system for motor bearings Control panel Driven discharging hopper 1,5 Hp This machine is offered totally RECONDITIONED, Compliant to CE regulations, You might be interested also in our [ROTO-CLASSIFIER](.germanplast.eu/listings/4115659-roto-classifier), [VERTICAL MIXER](.germanplast.eu/listings?q=VERTICALMIXERS), [BAG FILLING STATION](.germanplas ...

COSTARELLI PLASTIC AGGLOMERATOR USED, RECONDITIONED, for film, fibers, flakes of LDPE LLDPE HDPE PP PA PS EPS, etc, Average output 200-450 kg/h depending on materials and moisture content, Including LOADING BELT with side walls to feed the machine 1.000 mm. diam.steel barrel, complete with vacuum vent prepared to convey steam into an exhausting steam system (not included), sturdy steel rotating and fixed knives on bottom of the barrel, 110 kW, Hp 150 main engine,, side hatch, with safety device, for inspection and knives replacement, Grease lubricating system for motor bearings Control panel Driven discharging hopper 1,5 Hp This machine is offered totally RECONDITIONED, Compliant to CE regulations, You might be interested also in our [ROTO-CLASSIFIER](.germanplast.eu/listings/4115659-roto-classifier), [VERTICAL MIXER](.germanplast.eu/listings?q=VERTICALMIXERS), [BAG FILLING STATION](.ger ...

SALDOFLEX MODULA M-2011 S, for T-shirt bags, open top bags, sealing width 1.100 mm, min/max bag length: 400/1.200 mm, 3 lanes, Unwinder: 1.700 mm, Film speed: 160 m/min, Cycles: 300 cycles/min, Servo drive, Photocell, Gusseting units, control panel, Constructed in 2007, totally refurbished in 2021, availability: immediate, working width: 1100, conditions: very good, type: T.shirt and open top bags 1.100 max sealing width

OPTICAL VIS+NIR SORTER, increase the quality of your product with a very economical, highly performant solution., Effective separation: Removes impurities, different colors, and other contaminating materials., Sample memory: Learns from samples to separate based on texture and color., Improved quality: Enhances product quality, ideal for the recycled plastics market., Quick assistance: Fast intervention from an Italian company. 24/7 response and quick intervention and assistance from this small, versatile Italian Company., Suitable for various materials: Can sort PET, HDPE, PP, PVC, PC, ABS, PMMA, and more., Customizable: Available with 1-6 channels., NIR technology: Detects stones, glass, soil, and other dense bodies., Polymer detection: Identifies different polymers using short-waved infrared cameras., A.I. software: Learns from previous selections to improve over time., Compact size:  ...

with bespoke exchangeable screen (8-10-12-14-16 mm….), to obtain a more uniform size on agglomerated materials, new machine, complete with lifting auger which collects, material from the discharging hopper of the agglomerator. constructed in a state-of-the-art manner with safety devices side doors basket size about 1.500 mm x diam.600 mm. (or bespoke) gearmotor 0,75 kw screw diam. 220 mm 1,5 kw It can be completed with a pneumatic extraction system to bag filling station or vertical mixer, price options: new machine, bespoke to projecr

Hopper opening 560x1000mm Control panel with thermal motor protection only Available for: 3x230V / 50Hz or 3x400V / 50Hz 3x240V / 60Hz or 3x480V / 60Hz Capacity with fish boxes made of 25 kg/m3: 110-130 kg/h Capacity measured in fish boxes with lids (650 grams per piece: 170-200 boxes/h Wet boxes Non-corrosive Mobile on wheels Density 250-350 kg/m³ 11 kW 3-phase 400 V/50 HZ480 V/60 HZ LxHxW 3700x1600x870 mm, Possible additions: removable bottom, removable bottom drawer, Stainless Steel version, See the chart below for more sizes, installed power - used power in work: about 60-65% : 11

HOT-AIR SEALING SLITTER, to be positioned on top of rewinder in extrusion lines or on top of unwinder in bag makers., It creates a RIBBON SEAL. (adjustable width) on the web as per photo, while slitting, Adjustable air-blow to determine the sealed ribbon width Adjustable temperature Adjustable speed Adjustable width of the slit parts (200+1.400 mm./ 300+1.300 mm./ 400+1.200 mm.,…) minimum slitting at 200 mm. Complete with control panel, The machine is offered RECONDITIONED and TESTED

Description TURBO MIXING SYSTEM Turbo Mixer BFT 700 Horizontal cooler BFC 2500 Liquid additives scale

Description

Description including: 1 robot STAUBLI RX 160 2 flat conveyor belts 1 inclined conveyor belt with metal detector 1 PALBASE crusher, year 2018, XR3265 1 inclined conveyor belt for evacuation of parts 10 meters 1 suction hopper1 flat conveyor belt 1 flat and inclinedconveyor belt 12 meters 2 inclined conveyor belts 8 meters 1 flat conveyor belt 15 meters

Description including: 1 STAUBLI RX 130 robot 1 PALBASE XRT 3265 shredder with suction hopper 1 conveyor belt with metal detector 1 material feeder 1 weighing station

Description PVC PELLETIZING LINE Turbo mixing line, turbo mixer Plasmec TRM 600, Cooler Plasmec RFO 1500, Scale for liquid additives Plasmec DGL 150.3 Twin screw extruder Bandera diameter 110HT L/D 22 Electric motor D.C 110 kW Universal screws suitabble for Rigid PVC an Soft PVC Hydraulic screen changer BDO 140 Vibrating granule cooller Stock mixer for granule Bagging machine for 25 kg bags

Description Cold turbo mixer for Granule + Powder Nominal capacity 700 liters

Description Turbomixer Liters 800

Description including: 1 STAUBLI RX 130 robot 1 PALBASE XRT 3265 shredder with suction hopper 1 inclined conveyor belt with metal detector 1 material feeder 1 weighing station

Description including: 1 robot STAUBLI RX 130, year 2007 1 crusher PALBASE XRT 3265 with suction hopper 1 conveyor belt (9231) 1 material feeder 1 weighing station

Description Including: 1 TRIA crusher 1 STAUBLI RX 130 robot 1 inclined conveyor belt with metal detector 1 weighing station 1 material feeder