outras máquinas para trabalhar o metal usadas para venda (11,068)

number of spindles: 4 bore capacity in steel (diameter): 25 mmbore stroke: 120 mmweight of the machine ca.: 0.85 tdimensions of the machine ca.: 1.55 x 0.65 x 2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 230 tthroat: 345 mmstroke: 40-160 mmno. of strokes: 45 Hub/minram - range of adjustment: 100 mmtable surface area: 1000x660mm mmram surface: 700x500 mmtable height: 800 mmtool hole in ram: Ø65 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC lathe Type: T-7 Manufacturer: Leadwell Year: 2006 Control: Fanuc Oi-TC with 8.4” LCD Max. machining diameter: 350 mm Max. machining length: 550 mm Max. bar diameter: 65 mm Chuck size: 210 mm Spindle speed: 4500 rpm Spindle taper: A6 Number of tool positions: 12 Max. tool holder diameter: 40 mm Spindle motor power: 15 / 18.5 kW Machine weight: 4600 kg Central lubrication system Hydraulic tailstock Chip conveyor Electrical cabinet cooling Collet clamping 3-jaw chuck Ø 210 mm Jaw clamping pressure control via M-code Hard jaws – set, soft jaws –set Coolant system 4 bar Bar feeder preparation Oil mist extraction Absolent year 2023 - extraction performance = 1,000 m3/hour. Machine in good condition, fully functional, under power Find more here - / Contact us at -

CNC lathe Type: GLS-200 Manufacturer: Goodway Year: 2016 Control: Fanuc Oi - TF Hours: 4851 Max. swing diameter: 500 mm Swivel seat diameter: 310 mm Max. turning diameter: 360 mm Max. turning length: 500 mm Max. load capacity: 85 kg HOWA chuck size: 8" Rod diameter: 65 mm Hole through spindle: 76 mm Spindle bearing diameter: 110 mm Spindle: A2-6 Spindle speed: 45 - 4500 rpm X: 1210 mm Z: 520 mm Turret: 12 positions Tailstock Bar feeder Tool probe Scoop for removing workpiece Machine weight: 3,200 kg Dimensions: 2432 x 1643 x 1727 mm Machine in good condition, fully functional, under power Find more here - / Contact us at -

Manufacturer: Nabertherm Model: RSRC 470/270/13S Year of Manufacture: 2019 Type of Machine : Large-diameter tube furnace Technical Specifications: - Maximum pipe diameter: 470 mm - Heated length: 2700 mm - Number of heating zones: 3 - Furnace chamber dimensions: 670 x 2700 x 670 mm - Maximum temperature: 1300 degrees C - Operating temperature: 1250 degrees C - Rotation control range: 1 to 5 rpm - Electrical power: approximately 120 kW - Nominal voltage: 400 VAC - Connection power: 120 kW/kVA - Outer dimensions (L x W x H): 3150 x 1560 x 1155 mm (without base frame) - Weight: under 3000 kg - Documentation: EC declaration of conformity and operating instructions included Find more here - / Contact us at -

We are selling a complete used strip processing line consisting of 6 machines offered together as a fully automated coil-to-press production system.Machines 1 to 3 form a strip processing unit with a shared control cabinet and hydraulic system with a total power of 35 kW. Common Material Specifications • Material grades: St 37, St 52, bright and galvanised • Material thickness: 1.0 mm to 6.0 mm • Material width: 50 mm to 500 mm • Maximum material cross-section: 1500 mm2 Machine 1 • Type: decoiler with expanding mandrel • Manufacturer: ARKU • Model: AH 5000/600/MSG-4Q • Year of manufacture: 2002 • Condition: used, operational, very good • Maximum coil weight: 5 tonnes • Maximum coil diameter: 2000 mm • Expanding range: 470 mm to 530 mm • Weight: 5500 kg • Special features: hydraulically driven expanding mandrel, pressure arm, and roller Machine ...

eccentric press Type: LE 250 P Manufacturer: VSS Year: 2008 Pressing force: 250 t Stroke: 30-140 mm Max number of strokes: 45/min Slide adjustment: 110 mm Worktable dimensions: 1120 x 800 mm Ram dimensions: 800 x 475mm Machine weight: 13000 kg Machine in good condition, fully functional, under power Find more here - / Contact us at -

Manufacturer: Rump Model: Strahlanlagen Xedura 1500 Year of Manufacture: 2017 Type of Machine : Wire belt blasting machine Condition: good to very good Maintenance: regularly, once a year Beam hours: 1,849 Total operating hours: 2,146 (approximately 200 hours per year) Operating voltage: 400 V, 50 Hz Control voltage: 24 V DC Rated power: approximately 82 kW Find more here - / Contact us at -

wire dia.: . mmwire length: . mmpulling capacity: 7 ttotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 760 mmwidth: 730 mmheight: 1120 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 760 mmwidth: 730 mmheight: 1500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 760 mmwidth: 730 mmheight: 1500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC horizontal boring machine Type: WHN 13.8 A-CNC Manufacturer: TOS Year: 1979 Overhaul: 2007 Control: Heidenhain TNC 530 Spindle diameter: 130 mm Spindle taper: ISO 50 Main motor power: 37 kW X: 3500 mm Y: 2000 mm Z: 1250 mm W: 800 mm Table: 1800 x 2200 mm Max table load: 12000 kg Machine weight: 36000 kg In good condition, fully functional Find more here - / Contact us at -

CNC wire cutter Type: CUT 200 mS Manufacturer: AgieCharmilles Year: 2013 Control: EDM Expert X: 350 mm Y: 220 mm Z: 220 mm U/V: 350 × 220 mm Max. bevel cutting: 45° Table size: 680 × 450 mm Max. workpiece weight: 750 kg Tub size: 1000 × 550 mm Processing type: Plunge cutting Automatic wire feeding: Yes Wire diameter: 0.10 – 0.30 mm Axis rapid traverse: 3 m/min Dielectric: 200 l Power supply: 380 V / 3 phases Dimensions: 2020 × 2200 × 2015 mm Weight: 2450–3500 kg Machine in good condition, fully functional, under power Find more here - / Contact us at -

Manufacturer: Avyac Model: NC540 Year of Manufacture: 2021 Type of Machine : Drill grinding machine Condition : Like new Operating Hours: 1200 approx Loading system: Yes, automatic loading system included Weight: 2,000 kg Certification: CE marked Application: Grinding of drill bits and single-lip drill bits Find more here - / Contact us at -

Manufacturer: Oerlikon Model: Plasmatome 20 HPC ( without cutting table ) Year of Manufacture: 2012 Cutting Range: 2,000 mm x 6,000 mm (2 x 6 meters) Material Thickness Capacity: Up to 35 mm Cutting Method: Plasma Cutting Find more here - / Contact us at -

Manufacturer: Fanuc Model: ARC Mate 100ic 8L Year of Manufacture: 2015 Type of Machine : Welding Robot Condition: Used Technical Specifications - Number of axes: 7 - Reach: 2,200 mm - Controller: Fanuc System R-30iB - Welding system: Kemppi KempArc Puls 450 System Dimensions - Length: 11,000 mm - Width: 5,000 mm - Height: 2,500 mm - Robot rail travel: 7,500 mm Included with the Machine - Full protective enclosure of the system as shown in photos - Rotary positioner (Drehtisch) included - Software for offline programming included - On-site operator training available on request - Dismantling support provided - loading assistance available on site Find more here - / Contact us at -

Manufacturer: AGIE Model: Challenge 2 eCut Year of Manufacture: 2005 Type of Machine : Wire EDM machine Condition: Used, fully operational All annual maintenance documented Operating Hours - Re: 94,635 hours - Eros. Std.: 29,232 hours Electrical Data - Weight: 4,400 kg - Voltage: 3 x 400 V - Frequency: 50 Hz - Power: 9 kVA - Rated current: 15.2 A - Short-circuit current: 10 kA Travel Distances - X axis: 350 mm - Y axis: 250 mm - Z axis: 256 mm - U axis: +/- 70 mm - V axis: +/- 70 mm Technical Features - Wire diameter: variable from 0.1 to 0.3 mm (open guides) - SF module generator for fine finishing: Ra 0.12 - 0.2 um - 3D measuring probe for automatic part alignment on the machine - Variocut - Easyrun - Purecut - Dynamic Corner Control - R module - CAM link - Pieceinser Find more here - / Contact us at -

Manufacturer: AGIE Model: Challenge 3 eCut Year of Manufacture: 2004 Type of Machine : Wire EDM Machine Condition: Used, fully operational All annual maintenance documented Operating Hours - Re: 109,008 hours - Eros. Std.: 27,172 hours Electrical Data - Weight: 4,400 kg - Voltage: 3 x 400 V - Frequency: 50 Hz - Power: 9 kVA - Rated current: 15.2 A - Short-circuit current: 10 kA Travel Distances - X axis: 500 mm - Y axis: 350 mm - Z axis: 256 mm - U axis: +/- 70 mm - V axis: +/- 70 mm Technical Features - Wire diameter: variable from 0.1 to 0.3 mm (open guides) - Konik-Plus for very precise conical cutting - Surface finish down to Ra 0.3 um - 3D measuring probe for automatic part alignment on the machine - 1 additional filter for very long runtimes - Variocut - Easyrun - Purecut - Dynamic Corner Control - R module - CAM link - Pieceinsert Find more here - / Contact us at - ...

Manufacturer: Hydrap Model: HPSK 80 Year of Manufacture: 1994 Type of Machine : Hydraulic Press Condition: Used Operating hours: 27,436 h Press Performance - Nominal force: 800 kN - Maximum ram stroke: 300 mm - Overrun distance: 30 mm - Overrun time: 120 ms - Safety distance: 196 mm - Drive type: Hydraulic - Press orientation: Vertical - Number of cylinders: 1 - Cylinder diameter: 210 mm Working Area - Throat depth to ram centre: 250 mm - Minimum daylight table to ram: 500 mm - Clamping table length: 700 mm - Clamping table width: 500 mm - T-slots to DIN: 650 mm - Slot width: 22 mm - Slot arrangement: Diagonal - Clamping plate thickness: 150 mm Electrical Data - Voltage: 400 V - Frequency: 50 Hz - Current type: DC - Drive power: 22 kW - Rated current: 45 A - Mechanical Data - Weight: 6.5 tonnes - Oil viscosity: HLP 46 - Oil quantity: 485 litres Find more here - / Contact us ...

Manufacturer: OPS-Ingersol Model: EAGLE-V5 Precision-Line Year of Manufacture: 2025 Type of Machine : Milling Machine with Multi Change Automation Condition: Used.Ready for operation, connected to power Travel Distances - X axis: 550 mm - Y axis: 400 mm - Z axis: 400 mm Rotary Table - Swivel/rotary table with torque drives Spindle - Spindle type: HF spindle HSK-E40 with DDF by Fischer - Spindle speed: 1 to 42,000 rpm - Spindle power: 15 kW - Torque S6 (60%): 6.7 Nm Tool Magazine and Control - Tool magazine capacity: 100 positions - Control: Heidenhain - Weight: 8,500 kg Extra Accessories can be negotiated into the offer. - 20x Erowa ITS 148 Palette Type G with clamping studs for automation - 13x HSK E40 shrink fit chuck d3 by Haimer - 28x HSK E40 shrink fit chuck d4 by Haimer - 14x HSK E40 shrink fit chuck d5 by Haimer Find more here - / Contact us at -

CNC lathe Type: T1 Manufacturer: DMG MORI Year: 2023 Control: Siemens Sinumerik One + JobShop and ShopTurn Swing over bed: 550 mm Swing over support: 320 mm Max. turning diameter: 300 mm Diameter of clamping chucks – main spindle: 210 mm X: 232.5 mm Z: 410 mm Rapid traverse X/Z axes: 30/36 m/min Spindle nose: A2-6 Inner diam. of front bearing: 120 mm Spindle bore: 73 mm Max. diam. of machined bar: 65 mm Max. spindle speed: 4500 rpm Turret VDI: 12 positions Number of driven tool stations: 12 Max. speed: 5500 rpm Hydraulic tailstock Automatic tailstock travel range: 410 mm Tailstock sleeve taper: MK 4 Chip conveyor Machine weight: 3400 kg In very good condition, fully functional, under power Find more here - / Contact us at -

Wire cutter Type: AU-1000 iA Manufacturer: ACCUTEX Year: 2015 Max size of the work piece:1330 x 900 x 595 mm Max. weight of the work piece: 5000kg X/Y/Z/U/V 800 / 600 / 400 / 150 / 150 mm Diameter of the wire: 0.15-03 mm Continuously controlled 4 axes X, Y, U, V Drive system using AC servo drives Max. cut cone ± 22.5 °/ 100 mm Accuracy class of ball screws rpm C1 - the highest Filter system capacity l Main tank 1630 l, secondary tank (Z=600) 1280 l Max. cutting speed mm²/min 250 Dielectric conductivity measurement Auto – 5  200 k-cm Auto dielectric temperature measurement with an accuracy of ± 1°C Input kVA 15 Weight of the machine: 8500 kg Windows CE control system product for vertical alignment paper filter 2 pcs deionization resin - 1st filling container for deionization resin upper and lower nozzles – 2 pcs diamond guide 2 pcs tool for removin ...