outras máquinas para trabalhar o metal usadas para venda (11,238)

diâmetro: 32 - 50mm der Buchsenlength: 350 mm largura de 250 mm: 10 - 12 - 14 mmpesos: 20 kgdimensional: 400 x 150 x 250 mmGroove largura 10 - 12 - 14mmDiametro dos arbustos-guia:32 - 34 - 35 - 36 - 38 - 40 - 42 - 44 - 45 - 46 - 48 - 50mm

: 8 St.range L-W-H: 710 x 510 x 900 mmpeso: 67 kgDrawer com 8 gavetasDrawer dimensões 600 x 435mmDrawer altura:Drawer 1 - 7, 81mmDrawer 8, 173mm

length: 6000 mmwidth: 3250 mmnumber: 4 T-slot - width: 32/48 mmT-slot - distance: 180 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe Palttenfeld consists of 4 plates, size per plate 3250x1500 mm, number of T-grooves per column 7, price 1000 €/m²The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ram weight: 1000 kgstroke: 1000 mmthroat: 800 mmimpact capacity: 4200 mkptotal power requirement: . kWweight of the machine ca.: tdimensions of the machine ca.: mSteam driveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

comprimento: largura7000 mm: 7000 mmnumber: 8 Saderssness: 350 mmT-slot - largura: 36/58 mmT-slot - distância: 285 mmdepth dos T-nuts: 62 total prescrição de potência: kWpelho da máquina ca.: tdimensionais da máquina ca.: mPanel é composto por 8 painéis Tamanho por painel 3500x1750x350Numbre de ranhuras T por painel 7 peças Total 49 m²

floor-plate length: 6000 mmfloor-plate width: 2000 mmfloor-plate height: 350 mmwidth of T-slots: 36/60 mmT - slots distance: 285 mmnumber of T-slots: 8 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

comprimento da placa de chão: 4000 mm largura da placa de piso: 1600 mm altura da placa de piso: 300 mmT-ranhura - distância: 175 mmT-ranhura - largura: 28/0 número 48 mm de ranhuras T: 9 despeitotal: kWpeso da máquina ca.: 10 tescaços da máquina ca.: 4000x1600x250 m

workpiece weight: 4 kgworkpiece length: 200 mmdia. on complete length: 200 mmControl: Schenck-Lauer electrics - voltage/frequency: 400 / 50 V/Hzdimensions: 4,1 x 4,2 x 2,5 mconnected load: 12 kVAflange diameter: 250 mmweight: 4,5 tBalancing machine for rotors - Turbocharger fuselage groups- hydraulic measuring station- Compensation station- Pulsation measuring table- Chip extraction- Measuring instrument CAB 950T- feeding device- Schenck/Lauer Control on Dase of WindowsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

floor-plate length: 6000 mmfloor-plate width: 2400 mmfloor-plate height: 300 mmwidth of T-slots: 45/78 mmT-slot - distance: 300 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: 50 x 50 x 5 mmround steel bars: 30 mmU-iron on the x-axis: 60 x 40 x 6 mmroll diameter - bore: 40 mmroll diameter -toolpieces: 118 - 148 mmturning speeds: 9,3 U/minvoltage: 400 V / 50 Hztotal power requirement: 1,5 kWweight of the machine ca.: 0,425 tdimensions of the machine ca.: 1,5 x 0,8 x 0,8 m• Machine has got a standard roller set for profiles: flat upright 50 x 10, flat 50 x 15, upright 30, square tube 50 x 50 x 2,5, retangular tube 50 x 25 x 2,5.further roller sets optionally:for exampel: 1 set (6 rolls) for round pipe D = 3/8 + D = 3/4,Surcharge for each extra roller set: € 440,-/setMachine in unused condition.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Comprimento da placa: 5000 mm largura da placa de piso: 2100 mm altura da placa de piso: 300 mmT-ranhura - largura: 40/63 mmdespeitotal: kWpeso da máquina ca.: tdimensionais da máquina ca:m

ram hammer weight: 480 kgstroke: 710 mmthroat: 550 mmimpact capacity: 1250 kpmno. of strokes: 210 Hub/minram hammer stroke: 710 mmwork height max.: 720 mmtotal power requirement: . kWweight of the machine ca.: 7,4 tdimensions of the machine ca.: mpressure: 400 kgSteam driveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width: 520 mmheight: 700 mmdepth: 350 mmthickness of clamping plate: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThere are 2 pieces Width: 300 mm Height: 1200 mm Depth: 510 mmAbout usmore than 500 machines in the warehouse over 8500 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshop You want to sell machines production lines or your company, then talk to us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Length: 800 mmmeasuring range X-axis: 520 mmTable dimensions: 700 mmweight: 900 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: 40 x 40 x 5 mmU-iron on the x-axis: 80 x 45 x 5 mmroll diameter - bore: 40 mmroll diameter -toolpieces: 150 mmturning speeds: 10 U/minvoltage: 400 V / 50 Hztotal power requirement: 1,5 kWweight of the machine ca.: 0,3 tdimensions of the machine ca.: 0,8 x 0,92 x 1,4 m• Machine has a standard set of rolls for profile: flat (upright) 60 x 10, flat 80 x 15, Square 35, square pipe 45 x 45 x 2, rectangular pipe 60 x 30 x 3, Further sets of rolls can be supplied optionally,The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity: 3000 kgProduction capacity: 1500 kg/hdegree: 1200 °cheating capacity: 1700 kcal/KWtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

comprimento: 800 mm largura: 500 mmatéia: 1000 mm potência: kWpeso da máquina ca.: 0,3 tdimensionais da máquina ca.: m2 unidades

dia de 12 mmse de leitura: 20 mmse de potência: 400 U/minse: 500 - 1600 mmpelho da máquina ca.: 25 Kgdimensional da máquina ca.: m• dispositivo de corte pneumático, m• dispositivo de corte pneumático, M3 - M12,• com 6 adaptadores de estacas, tamanho 1,• válvula de controlo com lubrificação • encomenda nº 31681,

Máquina de teste de tensão Fabricante: Karl Frank GmbH Tipo: 81559 Ano de construção: 1980 Teste de pato: altura: 1000mm, largura: 400mm, profundidade desgraenzt Intervalos de força: 2000N, 1000N, 500N, 200N, 100N, 50N Preço original na época: 49.855,00 DM ATENÇÃO: O dispositivo não foi testado para obter funcionalidades. Toda a informação sem garantia

Número de ferramentas: 36 St.dimensionais: 0,72 x 0,56x 0,95 mpeso: 27 kgNovo carrinho de ferramentas móveis para suportes de ferramentas com 40 fitas ou opcional para suportes de ferramentas VDI 40. Cada linha é facilmente removível. O carrinho será embalado para transporte e será entregue sem qualquer suporte de ferramentas. Variações de cor são possíveis.

Número de ferramentas: 30 St.dimensionais: 0,72 x 0,56x 0,95 mpeso: 27 kgNovo carrinho de ferramentas móveis para suportes de ferramentas com 50 taper. Cada linha é facilmente removível. O carrinho será embalado para transporte e será entregue sem qualquer suporte de ferramentas. Variações de cor são possíveis.

Comprimento da tabela: largura 1000 mm: carga 1000 mm: 1,5 tflange diâmetro: velocidade de 700 mmversa: máx. 0,04 U/minpelho da máquina ca.: 1,2 tdimensionals da máquina L x W x H: 1,60 x 2,0 x 1,50 m

stations: 10 / 22 tool taper: SK 40 control: SIEMENS SIMATIC OP 3 total power requirement: ca. 112 kW= transfer machineShift drum with 10 workpiece stations,22 machining units (drilling 7 units, drilling and thread cutting8 units, drilling and sinking 5 units, drilling, sinking and thread-cutting 2 unit),spindle taper SK 40 each, engine power of the individual unitsbetween 4.0 and 4.5 kW,SIEMENS control SIMATIC OP 3, assembly robot ABBAccessories.: chucks (without jaws), chip conveyor, coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

stations: 10 / 22 tool taper: SK 40 control: SIEMENS SIMATIC OP 3 total power requirement: ca. 130 kW= transfer machineShift drum with 10 workpiece stations,22 machining units (drilling 10 units, drilling and thread cutting5 units, drilling and sinking 3 units, drilling, sinking and thread-cutting 1 unit, thread cutting 3 units),spindle taper SK 40 each, engine power of the individual unitsbetween 4.5 and 5.5 kW,SIEMENS control SIMATIC OP 3, assembly robot ABBAccessories.: chucks (without jaws), chip conveyor, coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 450 mmy-travel: 400 mmz-travel: 320 mmtool taper: HSK 63 spindle turning speed range: 0 - 10000 U/minrapid traverse: 30 m/minSystem for processing fittings, valve housings, etc.consisting of1 used flexible manufacturing cell (transfer machine) make RIELLO, model VERTIFLEX VFX 450-2 / 1-0 / 1-V, YOM 2010, with 2 pcs. 3-axis machining modules, each with 8-pos. tool turret, travel paths module 1: X1 / Y1 / Z1 = 450/400/320 mm, travel paths module 2: X2 / Y2 / Z2 = 450/400/320 mm, tool fixture HSK 63, rotary table with 2 integrated workpiece carriers á 400 mmø (B axis per workpiece carrier 360 x 1 °), coolant through spindle Acc.: chip conveyor, coolant deviceconnected by ABB handling robot with1 used flexible manufacturing cell (transfer machine) make RIELLO, model VERTIFLEX VFX 450-2 / 2-0 / 1-V, YOM 2003, with 3 pcs. 3-axis machining modules, each with 8-pos. tool t ...

diâmetro: 400 mm= pneum. 3 maxilares mandril fazem RÖHM, 400 mmø, com flange CAMLOCK, comprimento da haste de puxar 780 mm, ø da haste de puxar 40 mm, com unidade de manutenção

0: 680 x 450 x 430 mm pressão de funcionamento: 3 - 6 bar Consumo de ar: 250 l/min. peso da máquina ca.: 28 Kg: 0,76 x 0,5 x ,75 cm

Sistema de jato de areia, cabine de explosão, cabine de explosão dupla, dispositivo de limpeza de explosão de caixa de núcleo usado O sistema é composto pela cabine de detonagem para 2 trabalhadores com mesa rotativa extensível, plataforma de trabalho e gabinete de controlo. Um sistema de sucção e filtro com purificação de ar ciclone e comprimido, bem como o dispositivo de explosão. Hesteller: desconhecido Tipo: BFA-2-2 Diâmetro rotativo da mesa aprox. : 1,1 m altura máxima da peça de trabalho: aprox. Dimensões cabine aprox. 2 x 1,8 x 3,7 m Dimensões totais com dispositivo de entrada: aprox. 4,9 x 2 x 3,7 m Dimensões pedestal: aprox.: 4,9 x 1 x 1,8 m Filtro de dimensões: aprox. 1 x 1 x 2,7 m Alterações e erros nos dados técnicos, informações e preços, bem como na venda intermédia reservada.

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...