outras máquinas para trabalhar o metal usadas para venda (11,102)

turning diameter: 850 mmturning length: 2200 mmcontrol: Siemens 840 D The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

travel -x axis: 180 mmtravel -z axis: 370 mmTotal weight, approx.: 65 kgdimensions of the machine ca.: 2,0 x 1,2 x 2,0 mTool PresetterDMG Microset - ECO 1The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 450 mmwidth: 250 mmheight: 1.250 mmaccuracy +/-: 1 °distance between tapping holes: H: 130 mmdistance between tapping holes: V: 150 mmdistance between tapping holes: H: 70 mmdistance between tapping holes: V: 200 mmweight: - kgJOHANN FISCHER - Measuring AngleThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

travel -x axis: 300 mmtravel -z axis: 400 mmtool taper: VDI 40 / VDI 50 Total weight, approx.: 141 kgdimensions of the machine ca.: 1,2 x 0,8 x 0,85 mTool PresetterULMER - Präzisa 400The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

filling amount: ca. 250 lbasket dimensions: 560 x 260 x 40 mmdimensions of the machine ca.: 1,25 x 0,70 x 1,20 mSYSTEM CHEMIE - T 50Dive Wash Unit- Immersion Tank Dimensions: 585 x 385 x 500 mm- Draining Area Dimensions: 400 x 375 mm- 2x Storage Rack Dimensions: 400 x 350 x 210 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

5-axis CNC machining center Type: UMC-750 Manufacturer: Haas Year: 2020 X: 762 mm Y: 508 mm Z: 508 mm Tool magazine 30+1 positions Spindel taper: ISO 40 Max spindle speed: 12000 rpm Chip conveyor Machine in good condition, under power. Find more here - / Contact us at -

max. wheel diameter: 500 mmgear width: 200-400 mmmodule: 12 turning speeds: 0-3250 U/minbracke pressure: bis max. 95 Nminner taper: Konus #39 Control: Fanuc 16total power requirement: 15 kWweight of the machine ca.: 6 tdimensions of the machine ca.: 2.350 x 2.240 x 2.500 mmHIGHLY FLEXIBLE TESTING OF HARD, FINISHED AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETSThe T 60 bevel gear testing machine is a CNC testing machine with three linear axes for the fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers versatile objective and subjective testing options with speeds up to 3,250 min and braking torques up to max. 95 Nm.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 630 mmturning diameter over slide rest: . mmturning length: 3150 mmhollow: mmNumber:: 16304188/ turning diameter: mmweight: 4,8 tThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Rösler Model: F60 Motor Power: 3.3 kW / 400V / 3 phases / 50 Hz Technical Specifications: - Voltage: 400V - Frequency: 50 Hz - Power: 55 kW - Control Voltage: 24V DC - Max Current: 75 A The 2008 Rösler F60 finishing machine is part of Rösler´s line of surface finishing equipment, specializing in mass finishing processes such as deburring, polishing, cleaning, and edge radiusing for a variety of materials. Rösler, a well-known German manufacturer, focuses on advanced technology in vibratory and blast finishing, making the F60 suitable for applications across industries, including automotive, aerospace, medical devices, and general manufacturing. Key Features of the Rösler F60 Finishing Machine: - Process Type: - Vibratory Finishing: The F60 typically employs vibratory finishing, a method where parts are placed in a tub with abrasive media, which gently polishes ...

Manufacturer: Trotec Model: Rayjet Type of Machine : CO₂ laser cutting and engraving machine Find more here - / Contact us at -

Manufacturer: Servent Model: OTC-IRB-AX-V 6 L Year of Manufacture: 2006 Machine Type : Welding robot System type: Robotic MIG/MAG welding system MIG/MAG power source: OTC DP 400 Positioners: 2 x S40.1-4 / 1000 kg Linear track with gantry: S80.1-4 / S70.1 Travel length: 8000 mm Electrical connection: 3/N/PE, 400 VAC, 50 Hz, 100 A CE marked System configuration: - Overhead-mounted 6-axis robotic arm on 8 m linear track - Robot controller: OTC Daihen - Control software upgraded from AX-C to AX-2 - 2 welding stations - Each station equipped with 1-axis positioner - Positioner load capacity: 1000 kg - Positioner torque: 1000 Nm Welding equipment: - Power source: OTC DP 500 - Duty cycle: 100% at 350 A - Duty cycle: 60% at 500 A - Push-pull welding torch - Water-cooled gas nozzle - Wire feeding via roller liner - Torch alignment gauge included Sensors and automation: - Touch se ...

diameter: 315 mmbore: 95 mmtool adaptor: Din 55027 Gr. 8 revolutions per minute: max. 1500 U/minMachine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: INDEX Model: MS42C Year of Manufacture: 1998 ( Machine 1 ) 2002 (machine2 ) Machine 1 : Power supply: 3-phase / 50 Hz Rated voltage: 400 V Control voltage: 24 V Rated current: 125 A Rated power: 69 kW Electrical cabinet weight: 1500 kg Machine weight: 11000 kg Machine 2 : Power supply: 3-phase / 50 Hz Rated voltage: 400 V Control voltage: 24 V Rated current: 100 A Rated power: 72 kW Electrical cabinet weight: 1500 kg Machine weight: 11000 kg Working area Maximum bar diameter (bar feed, external): 42 mm Bar feed positions: spindle positions no. 1, 3, 4, 6 Spindle circle diameter: 320 mm Main spindle (turning spindle) Clamping system: Power clamping with INDEX spring-loaded hollow clamping cylinder and draw tube Maximum clamping stroke: 4 mm Clamping force: 26 kN Drives Main spindle drive (per spindle): Motor type: Variable-speed hollow-shaft  ...

CNC lathe Type: GLS-2800 Y Manufacturer: Goodway Year: 2021 Control: Fanuc Series Oi-TF Plus Working hours: 2564 Max turning diameter: 400 mm Max circulating diameter: 760 mm Max turning length: 680 mm Max spindle passage: 75 mm X: 250 mm Z: 750 mm Y: +-50 mm C-axis Rapid traverses X/Z/Y: 30/30/12 m/min Spindle motor power: 15 / 18.5 kW Max spindle speed (2 speed): 0–875 / 0–3500 rpm⁻¹ Turret power for powered holders: 3.7 / 5.5 kW (30 min) Max speed of driven holders: 6000rpm Performance of servomotors for X/Z/Y axes: 2.7 / 2.7 / 2.7 kW Cooling pump motor power: 0.5 kW Maximum torque on MK spindle: 527 / 757 (30 min) N·m Maximum torque of driven brackets: 35 N·m (15 min, 1500 rpm) Range of recommended clamping pressures for clamping: 0.35 MPa – 3 MPa Machine weight: 6000 kg Dimensions: 3230 × 2100 × 2252 mm Tailstock Chip conveyor Machine in very ...

temperature max.: °muffle size (length): 0muffle size (width): 0muffle size (depth): mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

temperature max.: °muffle size (length): 0muffle size (width): 0muffle size (depth): mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max: 1500 KGmin: 10 KGserial number: CO13136LG documentation: keine : 30 €The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

temperature max.: °muffle size (length): 0muffle size (width): 0muffle size (depth): mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

temperature max.: °muffle size (length): 0muffle size (width): 0muffle size (depth): mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

temperature max.: °muffle size (length): 0muffle size (width): 0muffle size (depth): mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Top Automazioni Model: ETL 10-65 Year of Manufacture: 2018 Machine Type : Automatic bar loader CE marked: Yes Technical data Maximum bar length: up to 3200 mm Weight: approx. 2500 kg Configuration and compatibility Originally installed on: Emco Maxxturn 65 Supplied as: Top Load version via Emco, manufacturer is Top Automazioni Included in sale: Bar loader including control unit Condition : The bar loader is in good, age-appropriate condition. No known damage. Fully functional before shutdown. Find more here - / Contact us at -

: mit Zubehör serial number: 71309 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

through-put width: mmworking heigth: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

current intensivity: bis 350 Aburner heads: . dimensions of the machine ca.: . mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.