We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Tipo de máquina
Fabricante
- Bomba (7)
- Bomba de vácuo (54)
- Bomba de vácuo de garra seca (6)
- Bomba de vácuo de vane rotativa (16)
- Bomba
de pressão e vácuo (10) - Cabine de pintura (11)
- Compressor (7)
- Câmara de teste de temperatura (7)
- Equipamento de Laboratório (15)
- Forno (5)
- Granulador (5)
- Gravador de gravura granito+vidro (6)
- Máquina de lavar pressão (76)
- Máquina de medição por coordenadas CNC (5)
- Reboques pesados (20)
- Separador (11)
- Serra de mesa deslizante (5)
- Servo motor 3000 rpm (10)
- Sistema de refrigeração (5)
- Sob jack (5)
- Tanque de armazenamento/ tanque de vinho/ tanque de sumo de fruta (9)
- Tanque de aço inoxidável (5)
- Tanque de água de extinção (8)
- Transmissão (5)
- Ventilador (9)
- 3D SYSTEMS (1)
- ABB (26)
- ABEL (1)
- ABI TRAILERS (1)
- ABS Trading (2)
- Abus (6)
- ACHENBACH (1)
- ACTIVATEC (1)
- ADL (2)
- AEG (11)
- AEL GMBH LEISNIG (1)
- AEROTECNICA (1)
- AERZEN (1)
- Aerzener (2)
- AFS (1)
- AGILENT (1)
- AGILENT TECHNOLOGIES (1)
- AGRAMKOW (1)
- AHRENS + BODE (1)
- AICHELIN (1)
- AIRCRAFT (2)
- AIRPOWER EUROPE (1)
- Airtec (4)
- AL-KO THERM (1)
- ALBIAN (1)
- ALBIS (1)
- Alcatel Adixen (2)
- ALDURO (4)
- ALEXANDERWERK (1)
- Alfa Laval (15)
- ALFA LAVAL, WESTFALIA (1)
- ALFAMACCHINE (1)
- ALKO (3)
- Allgaier (4)
- ALLROUND (1)
- ALLWEILER (2)
- Alpha Technologies (3)
- ALPHASTAUB (1)
- Alpine (3)
- ALPMA (1)
- Alsthom (2)
- ALTENBERG ? (1)
- ALTENDORF (7)
- ALUP (1)
- ALUP KOMPRESSOREN... (1)
- AMACKER + SCHMID (1)
- AMAFILTER (1)
- Amandus KAHL (3)
- AMETEK (1)
- AMIS (1)
- AMOB (1)
- AMSLER (1)
- AMSY (1)
- ANALYTIK JENA (1)
- Ankom (2)
- Anritsu (3)
- ANTON PAAR (1)
- APS (1)
- APV / ZAMET / AMOS (1)
- AQUILA TECHNIC (1)
- AREVA (1)
- ARISTO (1)
- ARJO HOSPITAL EQUIPMENT (1)
- ARMATEC BYSTRONIC (1)
- ARO (1)
- AROS HYDRAULIK GMBH (1)
- ASCA (1)
- ASHTON (1)
- ASM / SIPLACE (1)
- ASM SESOTEC (1)
- ASTED-MICROVERK APS (1)
- ASYS (2)
- ASYS/ROMMEL (1)
- ATG (1)
- Atlas Copco (9)
- Atom (6)
- ATOTECH (1)
- AUDI, VW,BMW.FORD, (1)
- AUTEL (1)
- AUTOBOND (1)
- AUTOMAC (1)
- AUTOMATECH/ALTIX (1)
- AUTOMAX (1)
- AZO (2)
- B+M (1)
- BABCOCK (1)
- BAHMüLLER (1)
- BAIONI (1)
- BAJLER ZEMBROD (1)
- Balkancar (8)
- Balzers (2)
- Bar Gar (2)
- BARBARIC (1)
- BARETTA (1)
- BARRERA (1)
- BASSRA (1)
- BATES, FANUC, REVITEC (1)
- BAUDIN (1)
- BAUMBERG (1)
- BAUPLYS (1)
- ... mais
A indicação da distância não é possível, porque não foi possível determinar sua localização. O pré-requisito é que seu navegador permita cookies e determinação de localização.
Fabricante:
(Categoria: 1300)
ABB 26
ABEL 1
Abus 6
ADL 2
AEG 11
AERZEN 1
Aerzener 2
AFS 1
AGILENT 1
AGRAMKOW 1
AICHELIN 1
AIRCRAFT 2
Airtec 4
ALBIAN 1
ALBIS 1
ALDURO 4
Alfa Laval 15
ALKO 3
Allgaier 4
ALLROUND 1
Alpine 3
ALPMA 1
Alsthom 2
ALUP 1
AMETEK 1
AMIS 1
AMOB 1
AMSLER 1
AMSY 1
Ankom 2
Anritsu 3
APS 1
AREVA 1
ARISTO 1
ARO 1
ASCA 1
ASHTON 1
ASYS 2
ATG 1
Atom 6
ATOTECH 1
AUTEL 1
AUTOBOND 1
AUTOMAC 1
AUTOMAX 1
AZO 2
B+M 1
BABCOCK 1
BAIONI 1
Balzers 2
Bar Gar 2
BARBARIC 1
BARETTA 1
BARRERA 1
BASSRA 1
BAUDIN 1
BAUMBERG 1
BAUPLYS 1
BDF 2
Becker 22
BEDESCHI 1
BEFRAG 1
BENETTI 1
BESANA 1
BHT 1
Bickel 2
BIG 5
BIGASS 1
Binder 4
BIRIM 1
BIT 1
Bizerba 2
BKW 1
BLEFA 1
BLEYMEHL 1
BLOBEL 1
BLUE BOX 1
BMI 1
BOFA 13
BOGE 1
BOKI 1
BOMAG 1
BORSIG 1
Bosch 34
BOTT 1
Bottero 14
Bous 4
BRAGONZI 1
BRAMIDAN 1
BRAMIN 1
BRANCO 1
BRAND 1
BREDEL 1
BREHMER 1
Brinkmann 10
BTB 1
BTD 1
BTS 1
BUCHER 1
BUHLER 2
BUHMANN 1
BUSCH 67
BUSETTI 1
BüCHI 1
Bühlmann 2
BüHNEN 1
Bürkert 2
BüRSTNER 1
BüTER 1
BäUMER 1
BöLLHOFF 1
CARAT 1
Carrier 5
Caterpillar 31
CDE 1
CEAG 1
CEIA 1
CEM 1
CENTIOM 1
CEPHEID 1
CERESCON 1
CHENTA 1
Cimbria 2
CISART 1
Citronix 2
CLEAN 1
Cleanfix 2
CLEIA 1
Clena 14
CLEVER 1
CLIVET 1
CLOOS 1
CNC 1
CNC-STEP 20
COLGAR 1
COMP AIR 1
CompAir 4
COOLSOON 1
CORNING 1
COSEN 1
CPOAC 1
CSAT 1
D+L 1
DALEX 1
DANDREA 1
Danfoss 3
DATRON 1
DE CROWN 2
DECANTER 1
DECORAL 1
DEK 3
DELEO 1
DEMAG 21
DEMATIC 1
DEN-JET 14
DEUMA 1
DEUTZ 1
DHM 2
DIAMAC 1
DIASORIN 1
DIETZ 1
diverse 10
DIXI 1
DKF 1
DMG MORI 1
DOLLBERG 1
DORNIER 1
DORST 1
DRAIS 1
DSM 1
DUE EFFE 1
DUeRR 2
DULEVO 2
DVP 2
DüCHTING 1
DYNAJET 21
DüRR 1
EASYDUR 1
EBMPABST 1
EBNER 1
EBS 1
ECO LOG 1
ECON 2
EDELMANN 1
EDUR 1
Edwards 17
EHRET 1
Eigenbau 2
Eirich 5
EKATO 1
EKOMEGA 1
EKRA 1
ELGLI 1
ELMO 6
EMCO 1
EMERSON 1
EMMEGI 1
EMO 1
EPOKE 1
EPSILON 1
EPURO 1
ERICHSEN 1
ERICO 1
ERMAS 1
ERSA 2
Erweka 2
ESC 1
Essemtec 2
Esterer 2
ETERNA 1
Euchner 2
Euromac 2
revendedor
aprovado
aprovado
100 € Multifunctional clamp with rotation + tilt Capacity approximately 1000 kilos Width opening approximately 100cm Equipped with pallet fork connection Auction-ID: A1-40132-349
revendedor
aprovado
aprovado
equipment tested and working , sign of use are present Auction-ID: A7-45207-65
revendedor
aprovado
aprovado
Max lifting weight 2500 kilos max working pressure 180 bar equipped with 1997 Beco Lifting mast MZ1 with total lifting capacity of 3805 kilos with a own weight of 305 kilos Volvo Connection Pin diameter 50mm center distance approximately 630mm Rotation function is electronically controlled (can be converted back to direct hydraulic 4th function) Auction-ID: A1-40132-339
revendedor
aprovado
aprovado
- Width14cm and 16cm. - Lengths 604cm and 402cm. - as well as various accessories. Auction-ID: A1-44065-376
revendedor
aprovado
aprovado
Dutch production; free span; trusses c.o.h. 5000mm; steel calculations; steel drawings; assembly drawings; anchor plan; steel numbered according to assembly plan; roof slope 20 degrees; 7 sets of intermediate trusses IPE 270/240; 2 sets of IPE 200/180 end trusses with wind posts, 1 set of which is equipped with a door recess; equipped with pressure tubes; wind bracing; purlin lips; nuts and bolts; dump anchors; steel construction according to product standard EN1090 (Certificate available after purchase); lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41454-9
revendedor
aprovado
aprovado
Extra long model - Technically inspected at 58738km without major comments - 6 gears - Slight damage to the bodywork and signs of wear inside, damaged mirror (see photos) - Otherwise neat condition - Starts, drives, brakes - Immediately deployable Auction-ID: A3-43365-10672
revendedor
aprovado
aprovado
equipment tested and working , sign of use are present Auction-ID: A7-45207-20
revendedor
aprovado
aprovado
Span of tie rod between the rafters; trusses c.o.h. 4000mm; box section as uprights and lattice trusses; steel drawing; 3D drawing; roof pitch 25 degrees; 10 sets of intermediate trusses; equipped with tie rods with suspension strips; wind bracing; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41454-31
revendedor
aprovado
aprovado
Number of bales: 28691 Auction-ID: A1-40132-27
revendedor
aprovado
aprovado
54 pieces of solid composite decking boards with co-extrusion layer with wood grain. Good for 39.9 m2. Can be used on both sides. Color anthracite/gray, unused. 400 cm long, 18 cm wide, 2 cm thick. Auction-ID: A1-40102-155
revendedor
aprovado
aprovado
Equipped with: cabin, rear linkage, rear PTO, lighting, rear hydraulic valves. Auction-ID: A1-40132-245
revendedor
aprovado
aprovado
Flat roof construction; steel construction with completely free span; trusses c.o.h. 5000mm; consists of 4 sets of intermediate trusses lattice girders with tubes as uprights; 2 sets of end façade trusses in IPE160 with wind posts; steel drawing; 3D impression; equipped with pressure tubes; wind bracing; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41454-25
revendedor
aprovado
aprovado
used to put chain hoist on ground level when using o-lattice-beam on top of layer tower (max load 1ton) Auction-ID: A7-45207-3
revendedor
aprovado
aprovado
Equipped with: 1x trestle with 18 pieces of glass plate. Auction-ID: A1-40102-118
revendedor
aprovado
aprovado
Equipped with: 4 gears, protective cage, tilting body, Deutz 1cylinder engine. License plate THL32H Auction-ID: A1-40132-244
revendedor
aprovado
aprovado
Equipped with PTO: 540 / 1000 rpm, Hydraulic output: ±45 l/min, Lifting capacity: ±5800 kg, torque 532 nm, front linkage, rear linkage, overhauled, radio, heater, Auction-ID: A1-40132-18
revendedor
aprovado
aprovado
Equipped with: 8 wheels, hydraulic tilting body, Mitsubishi diesel engine. Loading dimensions: 140 x 160 x 28 cm. Auction-ID: A1-40132-246
revendedor
aprovado
aprovado
Equipped with: year of construction: 2013, serial number V430702, steel spiral cleaning rollers, picking-off table, swiveling telescopic discharge belt, hydraulic swiveling soil drainage, remote control, bunker chain lubrication, tarpaulin canopy For picking-off table and bunker, hydraulically braked. Auction-ID: A1-40132-6
revendedor
aprovado
aprovado
equipment tested and working , sign of use are present Auction-ID: A7-45207-60
revendedor
aprovado
aprovado
6-axis industrial robot for oxy-fuel flame cutting Manufacturer: Kawasaki Type: FA06E with cutting torch RHÖNA BIR PMY Year of construction: 2012 Load capacity robot: 6 kg Reach: 1550 mm Repeatability: ±0.05 mm Cutting process: Oxy-fuel cutting Cutting torch: RHÖNA BIR PMY Suitable for oxygen/propane or oxygen/acetylene Robot controller: Kawasaki D40F-E002 Supply voltage: 400 V AC Mains connection: 3 phases / 50 Hz Current consumption under full load: 8 A Breaking capacity: 5 kA Weight: approx. 500 kg Media guidance via hose package on the robot arm Without protective enclosure / safety cage Suitable for automated cutting of steel parts and contours Auction-ID: A7-45256-16
revendedor
aprovado
aprovado
Equipped with: PTO, three-point suspension Auction-ID: A1-40132-235
revendedor
aprovado
aprovado
J&G Pro Mobile Air Conditioner 9000 BTU with Wifi and Heating Function Specifications: Brand: J&G Type: Pro Cooling capacity: 9000 BTU Air displacement: 330 m³/hour Functions: cooling, heating, drying, ventilating, sleep mode Power supply: 220–240 V Power: approx. 950 W Current: 4.3 A Noise level: approx. 65 dB Energy class: A Certification: CE, GS, RoHS Exhaust air hose length: approx. 150 cm Features: Wi-Fi functionality Remote control Wheels for moving Air filter (cleanable) Universal exhaust air kit (window kit) Exhaust air hose Instruction Manual Particularities: Suitable for cooling and heating living, working or sleeping areas Windowkit not suitable for tilt windows Advice store retail price per piece: €349,- Auction-ID: A1-40102-85
revendedor
aprovado
aprovado
Engine and turbo overhaul, Equipped with new brake pads, 3.0 turbo diesel. Auction-ID: A1-42011-9
revendedor
aprovado
aprovado
good driving car original mileage automatic Auction-ID: A1-42011-204
revendedor
aprovado
aprovado
Douven squirts Type: 48.23.903 Serial number: 90861 70 Pump: Douven 48.23.001 Pressure: Max 45 bar Liters per minute: 60 l/min Year of construction 1987 Tank capacity: 400 litres PTO speed: 540 1/min Features PTO, filter, steel frame, HMC 5/16\" hose reel with gun, strainer, pressure regulator, pressure gauge LxWxH: 95x135x214 cm Auction-ID: A1-40132-260
revendedor
aprovado
aprovado
flat roof steel construction; free span; trusses c.o.h. 4000mm; consisting of 5 sets of lattice girders with tubes as uprights; equipped with wind bracing and cross braces; steel construction is neatly ready for transport and must be picked up with 1 trailer; lots are loaded with a forklift for free Auction-ID: A1-41454-27
revendedor
aprovado
aprovado
revendedor
aprovado
aprovado
revendedor
aprovado
aprovado
revendedor
aprovado
aprovado
Equipped with brakes; Steering wheel functions; Dodge Viper Kit car; No documentation Auction-ID: A1-42011-195
Você não encontrar a sua máquina queria?
enviar inquérito procurado
a todos os revendedores (registo não é necessário)
