outras máquinas para trabalhar o metal usadas para venda (10,346)

Digital, Portable, LCD Display, Never Used Overall dimensions: 300 x 300 x 300 mm Weight: 3 kg Auction-ID: A7-48621-126

Composed of 2 pcs: base size 30 x 45 mm Overall dimensions: 200 x 300 x 200 mm Weight: 4 kg Auction-ID: A7-48621-308

Composed of 2 pcs: base size 30 x 45 mm, never used Overall dimensions: 200 x 300 x 200 mm Weight: 4 kg Auction-ID: A7-48621-227

Sharpening machine for bits, chisels, knives and scissors, never used Overall dimensions: 300 x 300 x 100 mm Weight: 2 kg Auction-ID: A7-48621-252

Lot of 2 magnetically based dial gauge holders with dial gauges, never used Overall dimensions: 200 x 200 x 150 mm Weight: 2 kg Auction-ID: A7-48622-239

- Machine designed for automatic shot blasting of castings, stamped parts and other hooked parts. - Maximum load per hoist: 2,000 kg. - Maximum dimensions of the pieces: Ø2,000 x 2,400 mm in height. - First theoretical shot load: 2,000 kg. - Installed power of the machine with STM separator: approx. 40 kW total - Acceptable ambient temperature: from -5 ºC to +40 ºC. - Pneumatic equipment with a operating pressure of 580 kPa. - Compressed air consumption: approx. 3 N m³/h. - Includes shot blast chamber protected with anti-wear material. - It has an overhead conveyor for handling the parts. - Incorporates a vacuum system and dust filter. - It has 4 turbines - The machine is prepared for connection to the vacuum/filter assembly. - The working system allows the rotation and translation movement of the hook for a uniform finish. - Operating conditions of this machine: uncheck ...

Polishing machine for car bodywork, power 1100 W, never used Overall dimensions: 400 x 200 x 200 mm Weight: 32 kg Auction-ID: A7-48621-226

Lot of 2 magnetically based dial gauge holders with dial gauges, never used Overall dimensions: 200 x 200 x 150 mm Weight: 2 kg Auction-ID: A7-48621-288

Case kit with riveter for threaded inserts complete with all accessories, never used Overall dimensions: 400 x 400 x 300 mm Weight: 10 kg Auction-ID: A7-48622-205

1 piece gas-heated chamber furnace with air circulation and hearth trolley Type: KLWg 220/180/650 Gas-heated chamber furnace for unsupervised operation, designed for three-phase three-phase current 400 volts / 50 Hz. Suitable for temperatures up to 700°C and for natural gas \"H\". Technical data External dimensions approximately: Width: 3400 mm Width with control cabinet: 3800 mm Height: 3200 mm Length with retracted hearth carriage: 8000 mm Length with extended hearth carriage: 15500 mm Interior clear dimensions approximately: Width: 2400 mm Height above beams: 1800 mm Length: 6500 mm Volume: 25.7 m³ Max. batch dimensions approximately: Width: 2000 mm Height: 1500 mm Length: 6100 mm Max. weight: 20000 kg Equipment / Execution 4 Rule groups 8 burners Total burner power: 720 kW Burner air blower: 5.5 kW Circulating motors: 4 x 22 kW Bogie hearth drive: 5.5 kW Fuel absorption capa ...

Lot of 2 magnetically based dial gauge holders with dial gauges, never used Overall dimensions: 200 x 200 x 150 mm Weight: 2 kg Auction-ID: A7-48621-239

Electric sharpener for chainsaw chains, never used Overall dimensions: 400 x 400 x 400 mm Weight: 10 kg Auction-ID: A7-48621-408

Electric sharpener for chainsaw chains, never used Overall dimensions: 400 x 400 x 400 mm Weight: 10 kg Auction-ID: A7-48621-160

Machine number: 100226Table dimensions: 400 x 300 mmincl. three-axis digital display HEIDENHAIN Auction-ID: A7-48624-16

Manufacturer: Boschert Year of Manufacture: 2014 Model: Compact 1000 Rotation Type of Machine: CNC punching machine with rotating head TECHNICAL SPECIFICATIONS - Punching force: 28 t (280 kN) - Tool system: Trumpf tool system, sizes 1 to 3, up to diameter 105 mm - Rotating head: all tools infinitely rotatable 360 degrees - Control unit: Boschert CNC 32050 control unit with TFT control panel - Working area: 1060 x 2080 mm - Sheet thickness capacity: up to 6 mm steel - Power supply: 3 x 400 V / 50 Hz - Connection load: 18 kVA - Control voltage: 24 VDC - Required fuse protection: 3 x 20 A METER READINGS (FROM CONTROL UNIT) - Machine on: 5,722 hours - Hydraulics on: 1,285 hours - Stroke counter: 2.3 million strokes Find more here - / Contact us at -

Manufacturer: Traub Year of Manufacture: 2002, factory overhaul completed 2018 Model: TNK 36 Type of Machine: CNC automatic lathe Operating Hours: approximately 147,007 hours, as of June 2026 CONTROL SYSTEM - Control: TX8i (64 bit), 14 inch flat screen - Additional V24 RS232 interface in the control cabinet - MDE interface in control cabinet, machine running and piece counter - Thread cutting without compensating chuck - Polyform function for C-axis - Tool monitoring MAIN SPINDLE - Spindle bore: 36 mm - Maximum speed: 6,300 rpm - Drive power: AC 6.7 / 10.7 kW - C-axis - Change parts: Hainbuch - Mounting aid base body - Manual Hainbuch change device COUNTER SPINDLE - Counter spindle as motor spindle - Spindle bore: 32 mm - Maximum speed: 6,300 rpm - Travel Z4: 250 mm - Rapid traverse Z4: 30 m/min - C-axis - Device for counter clamping pressure - Workpiece ejector device - Increa ...

CNC lathe Type: PUMA 2000 SY Manufacturer: Doosan Year: 2005 Control: Fanuc Hours: 38000 Counter spindle Driven tools Collet chuck Spindle bore: 65 mm Max turning diameter: 330 mm Max turning length: 510 mm Swing over bed: 600 mm Swing over support: 550 mm X: 250 mm Z: 580 mm Turret: 12 positions Driven tools Chip conveyor Spindle overhaul in 2023 Machine in good condition, fully functional, under power Find more here - / Contact us at -

CNC lathe Type: LYNX 220 C Manufacturer: Doosan Year: 2008 Control: Fanuc Hours: 17100 Spindle overhaul in 2025 Max. turning diameter: 320 mm Max. turning length: 305 mm Swing diameter over bed: 510 mm Swing diameter over slide: 290 mm X: 175 mm Z: 330 mm Spindle speed: 4000 rpm Spindle passage: 76 mm Bar capacity: 65 mm Turret: 12 positions Machine in good condition, fully functional, under power Find more here - / Contact us at -

CNC lathe Type: Talent 6/45 Manufacturer: Hardinge Year: 2005 Control: Fanuc Max. turning diameter: 284 mm Max. turning length: 381 mm Swing diameter over bed: 457 mm X: 229 mm Z: 406 mm Max spindle speed: 6000 rpm Spindle bore: 45 mm Turret: 12 positions Driven tools Collet chuck Bar feeder Machine in good condition, fully functional, under power Find more here - / Contact us at -

spindle diameter: 100 mmx-travel: 1400 mmdismantled: ja tool adaptor: SK 50 digital: ja weight of the machine ca.: 14 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre distance: 1500 mm: 210 serial number: 1289 multifix: ja : ja weight: 1,45 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 220 mmcontrol: Fabnuc OSPL 500 L turning diameter: 150 mmweight of the machine ca.: 4 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

incl. SENSORTHERM - Metis M3 - Pyrometer, Frame Pick-up date:10.08 - 12.08 Auction-ID: A1-48584-26

Van Ingen Tube Puller / Heat Exchanger Maintenance Set Mobile Van Ingen service unit for work on heat exchangers, condensers and industrial coolers. Executed in a robust mobile transport box and equipped with pressure gauge, hoses and maintenance tools. Suitable for overhaul and maintenance work on shell & tube heat exchangers. Offered in used condition with normal signs of wear. Auction-ID: A1-47350-75

WITHOUT Measuring Calculator/ Software Incl. 1 MITUTOYO Control Box, 1 FUJITSU Monitor and 1 CHERRY Keyboard Pick-up date: 17.08 - 19.08 Auction-ID: A1-48584-80

PowCon 300 SM Plasma Cutting Machine Professional PowCon 300 SM plasma cutting machine in portable version. Suitable for cutting steel, stainless steel and aluminum within construction, maintenance and production environments. The machine has an adjustable power range and a robust industrial housing. Thanks to the compact design, the installation is easy to move and suitable for both workshop and site use. Offered in used condition with normal signs of wear. Auction-ID: A1-47350-74

Used unchecked Auction-ID: A7-48592-20

workpiece diameter: 5 - 1.000 mmmodule range: 0,2 - 25 helix angle: < 90 °Control: Wenzel GearTec faceplate diameter: 750 mmx-axis: 1.200 mmy-axis: 550 mmz-axis: 1.000 mmtotal power requirement: 6,5 kWweight of the machine ca.: 11 tdimensions of the machine ca.: 3,30 x 3,15 x 2,70 mSoftware:BMain, FPDFPPostAction, GrafTool, TAlign,TAnalyse, TApplication, TCali, TCut_INPUT,TCut_MEAS_EVAL, TGear_INPUT, TGear_MEAS_EVAL,THob_INPUT, THob_MEAS_EVAL, TMesblatt, TPlot,TRoot_INPUT, TShaft_INPUT, TShaft_MEAS_EVAL,TStat, TStylus, WMI, wingeco.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used unchecked Auction-ID: A7-48592-16