outras máquinas para trabalhar o metal usadas para venda (11,484)

Cabeça de suporte em aço Suporte Waldrich, Máquina de ranhura metálica longa, a Schepar Peso total de aproximadamente 100 a 150 kg. Bom estado de uso, funcionou até ao fim, só a engrenagem de apoio traseira mostra sinais de desgaste. A oferta é para a cabeça, que é ajustável em altura com o volante. Foi desmontada da máquina propriamente dita. A placa de suporte no braço, que está ligada ao grande O fuso trapezoidal NÃO está incluído. A cabeça lateral também ainda está em stock, mas NÃO está incluída nesta oferta. Com o coração pesado, desmontei as peças de uma máquina de plaina superbamente preservada. A máquina ficava na cave de uma fábrica de máquinas e não era economicamente possível substituí-la . Aparentemente, foi colocado ali mais cedo e depois uma parede foi tapiada. Receberá uma fatura em papel. Tributação diferencial ...

Two similar CNC rotary transfer machines Winema are available. 1) Winema RV20 Evolution Flexmaster, year of manufacture: 2016, stations: 8, cycle time: 12s, machining scope: turning/drilling/milling/grooving/slot machining, collet feed stroke: 400mm, bar diameter: 25mm, length: 4200mm, coolant pressure: 30bar, production output: approx. 2100parts/8h, control: Bosch MTX CNC. Including material handling, Knoll turbo filter system, cooling unit, discharge conveyor, oil mist extraction and bar loading magazine. 2) Winema RV20 Evolution Flexmaster, year of manufacture: 2015, stations: 8, cycle time: 12s, machining scope: turning/drilling/milling/grooving/slot machining, collet feed stroke: 400mm, bar diameter: 25mm, length: 4200mm, coolant pressure: 30bar, production output: approx. 2100parts/8h, control: Bosch MTX CNC (Sinumerik). Including material handling, Knoll turbo filter system, cooli ...

Three smaller metalworking machines are available. 1) Behringer HBP-340 band saw, year of manufacture: 1984, max. round material cutting capacity: 340mm, max. square material cutting capacity: 340mm/340mm, miter range: +/-45°, cutting speed: 100m/min, machine dimensions X/Y/Z: approx. 3100mm/1100mm/1700mm, weight: approx. 2000kg. 2) Löser SO 0337 belt grinder attachment, year of manufacture: 1999. 3) Knoll PF 70/180 belt filter system with filter fleece, year of manufacture: 1999, filter capacity per minute emulsion/oil: approx. 70l/50l, fleece width: approx. 540mm, tank volume: approx. 280l, machine dimensions X/Y/Z: approx. 1700mm/1200mm/750mm, weight: approx. 200kg. An on-site inspection is possible.

Ano de construção: 2016

Pipe sealing bags, leak sealing bags, sealing plates, pipe seals, shut-off rings-Pipe sealing cushions: DN1200-Diameter: 1180 mm-Dimensions: 1180 x 500 mm-Weight: 140 kg

Depth gauge, caliper, vernier caliper, vernier caliper -Measuring range: 0-300 mm -Fine-tuning -long measuring jaws -Number: 4x depth gauges available -Price: per piece -Weight: 0.6 kg

Vernier caliper, caliper, vernier caliper -Measuring range: 0-300 mm - Fine-tuning -for internal measurements Price: per piece -Quantity: 2 available -Weight: 0.7 kg

Cutting device, pneumatic press, punch -Type: 290 908 -Max. pressure: 8 bar -Dimensions: 300/340/H270 mm -Weight: 25 kg

Punching tools for window construction -various types: AM 06 93 -993333/993352-1/993335/993334/94-234907 -Sale: only complete set -Total weight: 50 kg

Assembly star, assembly table, workbench, welding table, clamping plate, gluing press, gluing star, glue press, gluing stand, rotating device, container rotating device, welding rotating device -Cube size: 750 x 750 mm -Working width: 750 x 4000 mm -Geared motor: 0.18 kW -pneumatic disc brake -Foot switch -Dimensions: 5250/1100/H2750 mm -Weight: approx. 800 kg

Thread cutting chuck, thread chuck, tap chuck, thread cutting apparatus -with slip clutch -Integrated reversing gearbox with quick return -Thread cutting sizes: M5-M20 -Recording: MK4 -Dimensions: 380/95 mm -Weight: 4.1 kg

Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Collet chuck holders: Ø 1x12/2x18/2x20 mm -Price/Sale: complete -Weight: 1 kg

Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head -Diameter: Ø 100 mm -Number of teeth: 6 -Indexable inserts: Carbide -Recording: SK50 -Weight: 4.5 kg

Rotary table, rotary indexing table, dividing head, dividing head -Clamping surface: Ø 250 mm -Groove: 20 mm -Height: 108 mm -Dimensions: 580/350/H120 mm -Weight: 36 kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine-Dovetail: 118 by 160 mm 32 mm high-Drawing with the photos-Number: 1x counter bearing available-Price: per piece-Dimensions: 340/95/H220 mm-Weight: 15.4 kg

Tapping chucks, thread chucks, tapping chucks -with slip clutch -Cutting capacity: max. M16 -Recording: MK3 -Weight: 3.2 kg

Clamping plate, welding table, welding table, straightening plate -Width: 1500 mm -Length: 1500 mm -Height: 125 mm -Surface: good -Holes: Ø 50 mm -Transport dimensions: 1500/1500/H125 mm -Weight: 1500 kg

Clamping plate, welding table, welding table, straightening plate -Width: 750 mm -Length: 1000 mm -Height: 850 mm -Surface: milled -partly with threaded holes -Drawer -Plate thickness: 30 mm -with supporting ribs -Weight: 256 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outside: Ø 3x201/1x190 mm -Cone: 82 mm -Hole circle: Ø 105 mm -Number: 2x discs still available -Price: complete -Weight: 11 kg

Bezel, stick, lynette -Max. Passage: Ø 65 mm -Tip height: 83 mm -Edition: gray cast iron -technical drawing with the photos -Dimensions: 250/280/H65 mm -Weight: 6 kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Swallowtail: 75 by 110 mm 25 mm high -Drawing with the photos -Dimensions: 215/70/H200 mm -Weight: 10 kg

GeneralTraveling column machine; Control: CELOS X with HEIDENHAIN TNC7 Technical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal2000 mmCross800 mmVertical850 mmTool changerType of magazineChain Number of tools50 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmSwivelhead, B-axisControlled NC swivel milling head 12,000 rpm (B-axis) with clamping in position Continuously positioning NC- swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel speed: 50 rpm Swivel range: ±12Clamping System HSK-A 100Spindle taper HSK-A 100Speed range 20 -12000 rpmTorque (40% DC) 288 NmTorque (100% DC) 187 NmDrive power (40% DC) 44 kWDrive power (1 ...

Magazine drawer cabinet HAHN+KOLB 10 drawers, approx. 100x105x80t cm, small contents, without the items on the cabinet

Oferta 25447 Dados técnicos: - Horário de funcionamento 13598 h - Pressão de funcionamento 12,75 bar - Quantidade de entrega aproximada. 21,7 l/s - Transmissão 400 V / 7,5 kW - Velocidade do motor aprox. 3000 rpm - Filtro de ar - Requisito de espaço aproximado. L 1400 x H 1600 x D 800 mm - Peso aproximado. 270 kg

Tipo de máquina: Sistema de limpeza aquoso Marca: LPW Tipo: PowerJet 670T4 Ano de Fabricação: 2010 devido a uma mudança e à falta de uso, o sistema de limpeza é vendido a preços muito baixos. Preço original aprox. 450.000,00€ O sistema possui duas câmaras de trabalho e é adequado para tarefas exigentes de limpeza, incluindo a aplicação de proteção contra corrosão em regime aquoso. A máquina funcionou pela última vez em 2023 e necessita de grande manutenção antes de ser reativada.

Turning tool with indexable cutting jaws, clamping holder, turning tool, indexable insert holder, turning tool, indexable insert tool -Length: 300/230 mm -Height: 35 mm -Weight: 4 kg

Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool-Manufacturer: Sandvik Coromant R391.B03R-40F53 A-Socket: Ø 40 mm-Boring tool holder: 16 x 8 mm-Tool: Ø 435 mm-Weight: 6.1 kg

Machine vise, sturdy vise, drill vise -Jaw width: 250 mm -Back height: 50 mm -Clamping depth: 270 mm -Dimensions: 640/440/H220 mm-Weight: 79 kg

Gear, gears, gear shaft, pinion shaft, spur gear, spur gear, hollow ground gear -Gear: spur gear with hollow ground 63 teeth -Shaft holder: inner Ø 40 x 45 mm -Dimensions: see photos -Dimensions total: Ø 134 x 60 mm -Weight: 1.8 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker, clothes locker-Steel locker: double-winged, compartment width 30 cm-Width: 600mm-Depth: 500mm-Height: 1820mm-Doors: lockable, without lock-Number: 2x locker available (1x with 2 shelves)-Price per piece-Weight: 40kg / 42kg