outras máquinas para trabalhar o metal usadas para venda (11,074)

Manufacturer: Hurco Model: VMX24i Year of construction: 2021 Type of Machine: CNC milling machine Controller: Hurco Max 5 Spindle taper: SK 40 Spindle speed: max. 12,000 rpm Working feed rate: max. 38,000 mm/min Table size: approx. 760 × 510 mm Travel distances: X 610 mm / Y 508 mm / Z 610 mm Tool changer: 30 positions Machine power: max. 19 kW Weight: approx. 4,750 kg Condition: - Used (like new), very good overall condition - Fully functional and ready for use Equipment / Accessories: - High-pressure cooling system for coolant supply through the spindle (20 bar) - Cooling air via coolant nozzles or through spindle - Workpiece position detection with 3D probe - Tool measurement using touch probes - Chip conveyor (scraper belt conveyor) - Machine vises - Various collet sets / tool holders SK 40 - Toolbox with worktop and hand vice - Further accessories available upon req ...

Manufacturer: Weeke Model: Profiline ABL 220 Year of Manufacture: 2008 Type of Machine : CNC drilling machine with fitting units CE Certified: Yes Electrical Specifications - Operating Voltage: 400 V / 50 Hz - Power: 24 kW - Current: 50 A - Control Voltage: 24 V DC - Workpiece Dimensions - Length: min. 250 mm / max. 2400 mm - Width: min. 240 mm / max. 850 mm - Thickness: min. 12 mm / max. 60 mm The machine processes rectangular workpieces made of melamine-coated chipboard and similar panel materials. Machine Performance - Machining capacity: approximately 300 to 350 furniture frames per 7.5-hour working shift. - Axis Speeds: - X-axis: 80 m/min - Y-axis: 80 m/min - Z-axis: 20 m/min - Drilling Unit - V18 High Speed 7500 - Configuration: 18-spindle vertical drill unit (CONFIG-V18) - Spindle Speed: 1500 to 7500 rpm (variable speed controlled) - Direction of Rotation: Right / Left - ...

Manufacturer: Fasti Model: 902-315/40 Year of Manufacture: 1990.The machine was last retrofitted in 2019. Type of Machine : Bending Machine Technical Specifications - Total Weight : 25,000 kg - Nominal Pressing Force : 3150 kN - Stroke Length: 250 mm - Working Width: 4050 mm - Maximum Working Pressure: 30 MPa - Stopping Time: 71 ms - Two-Hand Release Safety Distance : 114 mm Find more here - / Contact us at -

Manufacturer: Biglia Model: B501 M Year of Manufacture: 1996 Type of Machine : Lathe CNC Control: GE Fanuc 0-T Turning Capacity - Maximum turning length: 500 mm - Maximum diameter over the bed: 520 mm - Maximum workpiece diameter: 68 mm - Maximum diameter per pass: 250 mm Spindle Specifications - Spindle bore: 80 mm - Spindle motor: 22 kW - Maximum spindle speed: 4000 rpm Axis Travel X-axis travel: 2105 mm Z-axis travel: 500 mm C-axis minimum programmable step: 0.001 degrees High-speed traverse: up to 80 rpm Turret and Tooling - Turret positions: 12 - Motorized tool positions: 6 - Motorized tool speed range: 50 to 3000 rpm - Motorized tool motor: 3.7 kW - Tailstock - Tailstock travel: 100 mm (automatic) - Tailstock taper: CM4 - Additional Equipment Included - Autoblok 210 BB chuck with hardened jaws - Filtermist FI4/8 fume extractor - Chip conveyor Machine Dimensions and ...

Manufacturer: Trumpf Type: Tru Laser 3040 5000 (5kW laser power) CO2 Working area: 4,000mm x 2,000mm Year of manufacture: 2009 Laser on: 24,146 hours Beam in: 10,319 Bh - Cool Line - High-speed cutting head - The machine has always been meticulously maintained by Trumpf under a maintenance contract and is in very good condition Find more here - / Contact us at -

Manufacturer: RUD Model: 16t Type of Machine : Turning Device Load Capacity: 16,000 kg Dead Weight: 4,400 kg Tilting Angle: 90 degrees Tilting Time: approx. 50 seconds Table Surface (Length x Width): 1,600 x 1,600 mm Table Height from Floor: approx. 1,100 mm Electric Power: 3.0 kW Overall Dimensions (L x W x H): approx. 2,600 x 1,800 x 2,800 mm Find more here - / Contact us at -

Manufacturer: Nexturn Model: SA-20D Year of Manufacture: 2008 Machine Hours - Control ON Time: 36,985 hours - Automatic Running Time: 23,697 hours - Feed Time: 17,438 hours - Total Parts Produced: 1,188,215 Recent Maintenance & Overhauls - Sub-spindle replaced approximately 2 years ago including spindle bearings and sealing air - system retrofit - Y-axis fully overhauled in autumn 2025 (bearings and ball screw replaced) - X2-axis overhauled approximately 3 years ago Included Accessories - Loading magazine with additional channels - Various collets for main spindle and sub-spindle - Various guide bushings - Chip conveyors Find more here - / Contact us at -

diameter: 500 mmthickness of jaw: . mmhollow: 145 mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Reading type: . 0weight - pallet system: . kglength: . mm1 Posten Bügelmessschrauben400-500 mm700-800 mm800-900 mm900-1000 mmThe technical data is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to sell the machine prior to purchase, our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in stockOver 15,000 m² of storage space, 70 t crane capacityMore than 10,000 items and accessories for your workshopIf you are interested in selling machines, production lines, or your business, please contact us.You can find further offers on our website.Tours are possible by appointment.We look forward to your visit.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 Posten Wesswerkzeug siehe BilderThe technical data is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to sell the machine prior to purchase, our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in stockOver 15,000 m² of storage space, 70 t crane capacityMore than 10,000 items and accessories for your workshopIf you are interested in selling machines, production lines, or your business, please contact us.You can find further offers on our website.Tours are possible by appointment.We look forward to your visit.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 1x tool adaptor: VDI 50 Shank diameter: 50 mmtool adaptor: Capto C5 Torque: max. 100 NmMax. Speed: 4.000 min/-1weight: 19,7 kgDriven ToolWTO 410505081-50- Angle Drilling and Milling Attachment- Recessed- With Coromant Capto C5- Internal and external coolant supply- Max. coolant pressure: 80 bar---- MACHINE APPLICATION ----DMG Mori CLX/CTX 750 V1/V3/V4, ecoTurn 650DMG MORI CTX beta VDI50 Disc TurretDMG CTX gamma VDI50 Disc TurretEMCO Maxxturn 110 (VDI50)GILDEMEISTER CTX 620 linearGILDEMEISTER CTX 650 EcolineSAUTER Disc Turret VDI 50, DIN 5480, rightVICTOR VTurn-36/40/45/46CV (DIN5480)- Machine interface: VD50A- Drive coupling: DIN 5480- i (n1:n2): 1:1- Direction of rotation: same- Coolant supply: IC 80 bar- Functional length LF: 124 mm- Projection length LPR: 183 mm- Functional width WF: 34.75 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...

number: 1x tool adaptor: VDI 50 Shank diameter: 50 mmtool adaptor: Capto C5 Torque: max. 100 NmMax. Speed: 6.000 min/-1weight: 19,5 kgDriven ToolWTO 410105085-50- Drilling and milling unit- Straight with offset- with Coromant Capto C5- Internal and external coolant supply- Max. coolant pressure: 80 bar---- MACHINE APPLICATION ----DMG Mori CLX/CTX 750 V1/V3/V4, ecoTurn 650DMG MORI CTX beta VDI50 disc turretDMG CTX gamma VDI50 disc turretEMCO Maxxturn 110 (VDI50)GILDEMEISTER CTX 620 linearGILDEMEISTER CTX 650 EcolinePITTLER PV 630, right-hand turretSAUTER disc turret VDI 50, DIN 5480, right-handVICTOR VTurn-36/40/45/46CV (DIN5480)- Machine interface: VD50A- Drive coupling: DIN5480- i (n1:n2): 1:2- Direction of rotation: unequal- Coolant supply: IK 80 bar- Functional length LF: 160 mm- Cantilever length LPR: 160 mm- Functional width WF: 75 mmThe data for this ad was created with ModulMWS -  ...

Load per column: 0Load per cantilever: 0Cantilever lenght: 250-800 mmRack height: 2250 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 9 und 7 St.range L-W-H: 720x710x1000 mmweight: . kgweight max. in kg: . kgwith contents see photosThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 13 St.range L-W-H: 1000x730x1050 mmweight: . kgweight max. in kg: . kgwith contents see photosThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight: . kgtaper MK: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 750/630 mmwidth: 780/530 mmdepth: 470/320 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 600 mmtable width: 500 mmtable height: 500 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 600 mmtable width: 500 mmtable height: 500 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool adaptor: . weight: ca. 500 kgSpindle headsDrill rod extensionsMounts with drillsTrolley 830 high x 750 wide x 600 deeptechnical data is provided by the manufacturer or operator and is therefore not binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items of accessories for your workshop If you want to sell machines, production lines, or your business, then get in touch with us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch teamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.