outras máquinas para trabalhar o metal usadas para venda (10,917)

A Schüco roll crimping machine for joining aluminum half-shells with polyamide insulating bars in thermally broken profiles is available. Profile throughput speed: approx. 34m/min, max. profile installation depth: 250mm, max. profile height: 400mm, max. insulating bar spacing: 300mm, machine dimensions X/Y/Z: approx. 900mm/900mm/1650mm, weight: approx. 750kg. Including infeed and outfeed. Documentation available. An on-site inspection is possible.

Basket dimensions: 1100x1100mm, usable height: 800mm, max. load weight: 700kg, spray pressure: 4.3bar, ambient temperature: 5-40°C, max. washing temperature: 90°C, material of media-contact parts: stainless steel V2A, power connection: 55A. With control cabinet and documentation. An on-site inspection is possible.

GeneralCTX beta 1250 4A Two spindle turning centre with - partial hollow clamping device for main spindle and counter spindle internal diameter of draw tube Ø67 mm (2.63 in) x 700 mm (27.55 in) deep - 2 C-axes and spindle brakes (hydr.) - 2 12 fold Sauter star turrets reception VDI 40, DIN 69880-40 with precision interface (Trifix) and tool drive connection/drive acc. DIN 5480 - Y-axis, slide I - counter spindle slide; Control: CELOS X with Siemens 840D SL Operate Headstock, leftClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range0-5000 rpmC-Axis Speed2000 rpmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWC-Axis Speed2000 rpmTorque (100% DC)280 NmSlide 1Lo ...

A glass cutting machine Lenhardt with a Tränker automation and control is available. Strip width: 777mm, strip length: 2366mm. Documentation available. An on-site inspection is possible.

A Krollmann pointing and rolling machine for pointing wire, round, and bar material in preparation for drawing processes is available. Machine body swivel: 90°, shear: available. Wire diameter range: 0.5mm-8mm. An on-site inspection is possible.

A Heinrich Müller rotary swaging machine for wire and tube production is available. Tool system: hammer jaws, tool set: 4/set, tool angle: 2.5°, tool length: 100mm, tool width: 32mm, tool heights: 50.5mm/51.5mm/52mm, tool diameter range: 15mm-31mm, initial diameter: 7.5mm, final diameter: 3.2mm, total cross-sectional reduction: 81%, reduction range per forming stage: 12%-20%, cycle time: approx. 15s, max. taper angle: 10°/side. Documentation available. An on-site inspection is possible.

A Wafios wire straightening and cutting machine with a straightening attachment of 1000mm is available. Wire diameter range: 1.5mm-7mm, cutting length range: 20mm-3000mm, straightening rotor speed: 6800rpm, pitch: 71/69, cutting stroke: 270/min, machine dimensions X/Y/Z: approx. 3300mm/1200mm/1800mm, weight: approx. 1400kg. An on-site inspection is possible.

LNS PB 80 / Máquina de Chanfrar Barras / Máquina de Afiar -Marcação CE - Diâmetro chanfrado - 30 graus 8-80mm - Diâmetro do chanframento - 45 graus 8-60mm -Diâmetro de giro 10-60mm - Comprimento máximo de viragem 40mm -2x velocidades -Potência 0,0-1,65 KW -Chuck de três mandíbulas -Suporte de material ajustável -Documentação Dimensões: LxLxH 1x0,7x1,6 metros / Peso 400 kg

Dados técnicos: Fabricante: Tesa Brown&Sharpe Tipo: Derby Etalon 454 Ano de Fabricação: 1998 Intervalo de medição X/Y/Z: X 457 mm, Y 508 mm, Z 406 mm Transdutor: Renishaw TP-ES Dimensões e peso Peso: aprox. 250 kg Condição Condição: Usada Funcional: Testado e totalmente funcional

A Rohde chamber kiln is available. Volume: 600l, max. temperature: 1000°C, internal dimensions X/Y/Z: 710mm/870mm/920mm, power: 40kW, insulation layers: 2, heating directions: 4, heating element: grooved refractory brick. Machine dimensions X/Y/Z: approx. 1100mm/1500mm/2300mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible.

BJ Band Saw Kasto SBL 280 U 1998 Torno convencional E3N01 Torno Hurco TM8i Máquina de moagem superficial FSG-1640AD Wagner 1997 Empilhador Silent E R20-15 Fresadora de 3 eixos Hurco VMX24 Fresadora de 3 eixos Hurco VMX24 Fresadora de 3 eixos Hurco VMX30t Fresadora de 3 eixos Hurco VMX64 Máquina de EDM por fio Mitsubishi FA20 Máquina de Medição de Coordenadas CNC Zeiss Contura G2 2007

An automatic Munder blow-off system for cleaning cylindrical air filter cartridges is available. Compressed air supply: 6bar-8bar, quality: 5, nozzle pressure: 6bar, volumetric flow rate: 190m³/h, vacuum: 20kPa, max. filter height: 1400mm, max. filter diameter: 540mm. Documentation available. An on-site inspection is possible. Expected to be available June 2026.

A CNC laser marking and engraving system for component marking is available. Laser class: 1, laser type: diode-pumped Yb laser, laser power: 20W, axis travel X/Y/Z: 390mm/560mm/275mm, max. workpiece dimensions X/Y/Z: 730mm/365mm/445mm, max. workpiece weight: 50kg, control system: AC-Laser. Documentation available. An on-site inspection is possible.

Renovado em 2022 Distâncias de deslocação: X= 350 mm, Y= 250 mm, Z= 256 mm Curso do eixo U/V: +/- 70 mm Conicidade máxima: 30° a 100 mm de altura Dimensões máximas da peça: 750 x 550 x 250 (150 na banheira) mm Peso máximo da peça: 200 (em banho) / 450 (sem banho) kg Qualidade de superfície alcançável: Ra: 0,30 μm Tolerância média ao contorno: +/- 6 μm Taxa máxima de corte: 300 mm²/min Diâmetros de fio disponíveis: 0,20 – 0,33 mm Máquina de banho-maria com autom. Enfiamento e reenfiamento de fios após quebra de fio

GeneralUniversal machining centre; Control: 3D control Heidenhain iTNC 530 Working area 1Longitudinal500 mmCross420 mmVertical380 mmTechnical DataDrive power (100% DC)25 kWDrive power (40% DC)35 kWSpeed range20 -18000 rpmSpindle taperHSK-A 63 Pick-up toolchangerPick-up tool changerNumber of tools 32NC rotary table w. swivel axisNC rotary table with swivel axisRotary air leadthroughRotary air leadthrough for NC rotary table with swivel axis 2x G1/8 interfaceRotation Speed 5. Axis 26 rpm5. Axes (swivelling range) 0 - 180 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 33 rpmDistance between T-Slots 63 mmNumber of Slots 5Slot width 14 mmMaximum load (table centre) 200 KgCentre bore 30H7 mmTable surface 500 x 380 mmType of Measuring system Direct measuring systemSpecial equipmentSealing air in swivel rotary table

Olá, à venda está uma máquina de EDM por fio usada muito boa da marca Fanuc Robocut Alpha C400iC. A máquina EDM tem apenas 3288 horas de funcionamento e é do ano 12/2021. O Fanuc ainda está energizado e disponível com pouca antecedência. Venda anterior e erros excetuados.

Máquina de EDM com afundimento de matrizes Fabricante: Exeron Tipo: 312 Ano de Fabricação: 2004 Controlo MF10 Percursos de deslocamento X/Y/Z: 450 x 300 x 300 mm Mesa de trabalho: 820 x 400 mm Contentor de trabalho: 900 x 520 mm Mesa de distância / pena: 150 / 450 mm Massa máxima do eletrodo: 30 / 150 kg Peso máximo da peça: 800 kg Bacia de trabalho com altura de enchimento: 300 mm Trocador de ferramentas 20 vezes Corrente do gerador: 60 A Fonte de alimentação: 400 V Corrente trifásica: 50 Hz Consumo de energia: 8 kVA Dimensões totais L/D/H aprox.: 1.910 x 1.798 x 2.300 mm

A CNC tube welding system Weil Technology for longitudinal seam welding is available. Tube diameter range: 76mm-600mm, Tube length range: 250mm-1550mm, Material thickness range: 0.8mm-2mm, Welding process: Laser, Max. welding output: approx. 80pieces/h. Documentation available. An on-site inspection is possible.

A CNC 10 axis pipe cutting system HGG including a plasma source Kjellberg HiFocus 280i is available. Pipe diameter range: 30mm-330mm, max. pipe load: 20kN, max. pipe length: 13000mm, max. workpiece weight: 2000kg, max. cutting angle: 70°, max. plasma cutting current: 280A. Documentation available. An on site inspection is possible.

An alkaline based single chamber cleaning system wash system is available. Containers: 3, total tank volume: 12.9m³, working dimensions X/Y/Z: approx. 8000mm/1200mm/1600mm, overall system dimensions X/Y/Z: approx. 19500mm/7200mm/4300mm. Documentation available. An on site inspection is possible.

Three similar profile milling machines CMS are available. Two of the units were used as spare parts carriers, therefore only one functional machine with 2 spare parts donors is referred to here. Spindle power: 7.5kW, tool holder: BT30, speed: 15000rpm, machining dimensions X/Y/Z: 620mm/1200mm/193mm, machining dimensions W/V: 2440mm/629mm, feed rate: 12m/min, positioning accuracy: 0.001mm, control: IBH/ATEC 6000HS, years of manufacture: 1992/1995/1996. Documentation available. An on site inspection is possible.

A multi-station transfer machine Riello with drilling and tapping units is available. Horizontal working units: 2x drilling units, 2x tapping units, 1x combined unit. Radial working units: 1x drilling unit, 1x tapping unit, 1x combined unit. Quill stroke: 100mm, spindle holder: SK40, rotary table type: TG 320, turret stations: 5, chuck diameter: 200mm, jaw opening travel: 12mm+12mm, spindle holder-chuck center distance: 225mm, total connected load: 23kW. Machine dimensions X/Y/Z: approx. 3700mm/3400mm/3050mm, weight: approx. 5800kg. Documentation available. An on-site inspection is possible.

A complete painting system on two levels for engine manufacturing including all necessary aggregates and components is available. Workpiece carriers in the system: 118, cycle time: approx. 49s, complete throughput time: 97min, max. production capacity with 3 shifts: 258000/year, overall system dimensions X/Y: approx. 26000mm/9000mm. 1) Adsorption dryer. 2) Steam humidifier Carel. 3) Two- and three-stage filter boxes. 4) Compressor technology. 5) Air dryer Hygrex. 6) Robot with control cabinet and spray gun. 7) Paint dosing pump. 8) Paint preparation and cleaning. 9) Osmosis system. This is a complete painting system using a robot from cleaning to the drying process. Documentation available. An on-site inspection is possible.

A heating and drying oven Horo is available. Connected load: 12.5kW. Max. temperature: 120°C. Heating power: 12kW. Volume: 2736l. Documentation available. An on-site inspection is possible.

A relatively modern corona pretreatment system for single sided aluminum foil coating is available. Material: aluminum foil, intended use: coating, coating sides: 1, web width: 1350mm, treatment width: 1450mm, treatment speed: 3m/min, roll diameter: 125mm, roll length: 1550mm, generator type: Softal 9030, generator power: 3kW. Total system dimensions X/Y/Z: approx. 2000mm/1550mm/1700mm, weight: approx. 1500kg. Including ozone exhaust system RD 4. Documentation available. An on site inspection is possible.

1 x Sistema de Medição Duplex ZEISS-Stiefelmayer Bauj. 11/1995 1 x Sistema de Medição Duplex Stiefelmayer Bauj. 1985 1 x sistema de medição Stiefelmayer construído em 1987 1 x sistema de medição Stiefelmayer construído em 1987

This 3-axis Werth Scope-Check 400 was manufactured in 2013. It features a measuring range of 400 mm in the X and Y axes, and 300 mm in the Z axis. The machine is equipped with a tactile probe system and operates on Windows 7 Professional. If you are looking to get high-quality measurement capabilities, consider the Werth Scope-Check 400 CMM machine we have for sale. Contact us for further details.

2 máquinas EDM: Charmilles Robofil 2020 BJ 1994 e Charmilles Robofil 4020 BJ 1996

- Canal guia (amortecido a óleo) - Comprimento máximo da barra 3.200 mm - Canal guia incluído: D 52 mm - Comprimento da lâmina do material L - Centralização - Dispositivo síncrono - Última ligação a autómata de curva longa - Peso aprox. 900 kg - Dimensões LxWxH 4.000x700x1.200 mm

- Canal guia (amortecido a óleo) - Comprimento máximo da barra 3.200 mm - Canal guia incluído: D 52 mm (a pedido, novas peças de esgoto € 1.500,-, aproximadamente 4 semanas) - Comprimento da lâmina do material LL - Centralização - última anexada ao Gildemeister Twin 32 - Peso aprox. 900 kg - Dimensões LxWxH 4.000x700x1.200 mm