outras máquinas para trabalhar o metal usadas para venda (11,237)

: 8 St.range L-W-H: 880 x 580 x 1000 mmweight: 156 kg: 100Kg je Lade Stable tool cabinet with 8 drawers, lockable.2 x 75, 4 x 100, 1 x 150 and 1 x 200mmInternal dimensions: 770x450 mm. Maximum load per drawer 100kg!Furnishings:32x boxes 75 x75 mm.16x boxes 75 x 150 mm.8x boxes 150 x 150 mm.12x dividers long32x short dividers1x stacking trayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing diameter: 90 mmstroke: 490 mmthroat: 400 mmtotal power requirement: 10 kWweight of the machine ca.: 3.500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

degree: 650 working heigth: 250 mmlength: 250 mmwidth: 250 mmdepth: 450 mmtotal power requirement: 8 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

largura: 33 mmparafuso-diâmetro: 60 mm

press capacity: 148 tomaterial: Hartmetallstangen quality: Extrusionspressvorgang 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 180 mmworkpiece length: 0 mmwork piece width: 1350 mmtotal power requirement: 65 kWweight of the machine ca.: 7.500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 700 mmtable width: 400 mmtable load: ttotal power requirement: kWweight of the machine ca.: 250 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 0,2-40 tmax. workpiece diameter: 70 mmthreading length: 120 mmControl: total power requirement: 29 kWweight of the machine ca.: 9,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1000 mmy-travel: 1600 mmz-travel: 800 mmControl: WENZEL WPC 2040/FW31.351 total power requirement: kWweight of the machine ca.: 5500 kgdimensions of the machine ca.: mCoordinate measuring m/c, software QUARTIS R12/16, Renishaw PH10MplusThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2800 mmy-travel: 800 mmz-travel: 1300 mmtotal power requirement: kWweight of the machine ca.: 3 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

temperatura máxima: 1150 tamanho gradde abertura: 260 x 160 mmprofundidade da câmara: 450 mmpotência total necessária: 8 kWpeso da máquina ca.: tForno de endurecimento

HSK63-B, F Test Mandrel Adequado para os tipos de máquinas Vollmer: QWD 750 / QWD 760 / QWD 750 H / QWD 760 H / VPulse 500 e todos os modelos da série QXD (200/250/400)

diâmetro máximo da roda: 400 mmlargura da engrenagem: NA mmmódulo máximo: módulo de 5 min.: requisito de potência total: kWpeso da máquina ca.: tdimensões da máquina ca.: mTestador manual de engrenagens de dois flancos

Elementos de guia de arame para metal, espaçamento 100-200 mm, 15 mm mais comprido A utilização destes elementos de guia de arame reduz o diâmetro das peças que podem ser maquinadas. Adequado para tipos de máquinas Vollmer: QWD 76 P / QWD 750 / QWD 760 / QWD 750 H / QWD 760 H / VPulse 500

Adaptador para eixo A HSK63-B, F Para carregamento manual e automático. Adequado para os tipos de máquinas Vollmer: QWD 750 / QWD 760 / QWD 750 H / QWD 760 H / VPulse 500 e todos os modelos da série QXD (200/250/400)

diâmetro máximo da roda: 120 mmlargura da engrenagem: 160 mmmódulo máximo: 3 min. módulo: requisito de potência total: kWpeso da máquina ca.: tdimensões da máquina ca.: mTestador de engrenagens de dois flancos

diâmetro máximo da roda: NA mmlargura da engrenagem: NA mmmódulo máximo: módulo mínimo: requisito de potência total: kWpeso da máquina ca.: tdimensões da máquina ca.: mTestador de engrenagens de 2 flancos operado manualmente

The high-end PRECIOUS M 080 system from EOS was developed for the additive manufacturing of precious metal parts for the watch and jewelry industry. Designs can be realized within a few hours and without investing in tools. The system builds the parts layer by layer, melts fine metal powder with a laser and creates extremely complex shapes such as free-form surfaces, hollow shapes and moving parts., The machine offered is fully functional., - Last maintenance unknown, - Machine parameters for red, white and yellow gold, technology: DMLS (Direct Metal Laser Sintering), Construction volume: Diameter 80 x 95 mm, Dimensions machine unpacked: 800 x 950 x 2250 mm, Weight machine unpacked: 580 kg, Power connection: 200-240V, network connection: Ethernet, software: EOS RP Tools (optional), EOSPRINT, laser: Yb-Fibre Laser 100W, scanner: High-speed scanner, F-Theta lens, scanning speed: up to 7.0  ...

rolling capacity max.: NA tworkpiece diameter: 38 mmworkpiece length: 500 mmtotal power requirement: 24 kWweight of the machine ca.: 10 tdimensions of the machine ca.: mMax.Ø tool slide stroke 760 mmMax.Ø rack length 610 mmLength of workpiece between centres, approx. 500 mmMax. tooth width / profile width 92 mmMax. workpiece Ø 38 mmTailstock stroke on outboard support, hydraulic, approx. 500 mmModule range 0.3 - 1.3 Total electrical load, approx. 24 kW - 380 V - 50 HzWeight, approx. 10,000 kgAccessories / Special Features KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. Originally, external gears were formed on the machine using pinion cage ...

diâmetro da mesa: 800 mmcarga da mesa: 0,6 taltura da mesa: mmrequisito de potência total: kWpeso da máquina ca.: tdimensões da máquina ca.: mMesa de indexação circular diâmetro 800 mm, rotativo motorizado, giratório

max. wheel diameter: 2500 mmgear width: 0 mmmax. module: 34 min. module: 1 total power requirement: ca. 15 kWweight of the machine ca.: 15 tdimensions of the machine ca.: 4,20 x 2,00 x 2,90 mExtra große ZR-Prüfmaschine, GegenhalterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

força de tração - máx.: 0 tdayligth: 0 mmdiâmetro do fio.: mmrequisito de potência total: kWpeso da máquina ca.: tdimensões da máquina ca.: m

corpo de balanceamento min/máx.: 0,1 - 1 kgdiâmetro do corpo de balanceamento w / o unidade de usinagem: 300 mmdiâmetro do corpo de balanceamento com unidade de usinagem: - necessidade de potência total: 0,7 kWpeso da máquina ca.: 0,5 tdimensões da máquina ca.: 10,61,2 mNo. 0304Máquina de balancear vertical SCHENCK Z 35 EFaixa de trabalho: Peça de teste máxima 300Controlo: Peso da peça de ensaio 100 g - 1 kgMovimentação: .7

table length: 500 mmtable width: 250 mmampere: 50 Ax-axis: 290 mmy-axis: 200 mmz-axis: 300 mmtotal power requirement: 6 kWweight of the machine ca.: 1100 kgdimensions of the machine ca.: mCNC-Controlled Die SinkerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: M10 - M33 mm: 35/115 U/min.: 320 Nmair pressure: 6 - 8 barworking area: 400 - 2000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 900 mm, 600 mm, 370 mm

Os pórticos de laser compactos com scanner a laser NSP-9060-xx representam sistemas de processamento a laser NanoSec baseados em lasers de fibra de alta qualidade ou tecnologias de laser CO2. Os comprimentos de onda laser de 1064nm, ou 10600nm, são adequados para marcar todos os metais, plásticos, materiais orgânicos, bem como vidro. Portais e campos de varredura de tamanhos diferentes podem ser configurados uns com os outros. O novo conceito de sistema permite que os scanners com sua alta precisão e velocidade sejam combinados com os eixos x,y,z de um pórtico. Várias alimentações ou grandes formatos são processados com a mais alta precisão e velocidade de produção.

workpiece weight: 150 kgworkpiece length: 2500 mmdiameter: 160 - mmbalancing speed variable: 100 - 3000 U/mindia. axle journal: 160 - 350 mmvoltage: 400 Vtotal power requirement: 1,5 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: mBalancing unit: mControl: mSoftware TIRA X9000Operating System Windows XPSoftware update 2007Serial No.: R 32/98Max display sensivitiy: 0.5 gmmBalancing speed 100 - 3000 RPMThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

filling capacity: 750 kgmax. workpiece height: 900 x 300 mmworkpiece weight: total 550 kgmax. workpiece weight: 30 kg/Stck.revolutions per minute: 22 U/minfilling amount: 50-60 %Colour: blau 5015 RAL0: 1775 x 440 mmtotal power requirement: 3 kWweight of the machine ca.: 1995 kgdimensions of the machine ca.: 2,9 x 1,33 x 1,75 mVideo available on our website.: Electric 400 Volt: New deburring machine for safe and to efficiently deburr workpieces. Suitable for heavy applications. The EVO model is available for light to mediumworkpieces.6 - square drum lined with durable, vulcanized rubber thickness 36 mm, locking cover with gas pressure springs, roller shutters to protect againstthe rotating Container, stable design, easy operation.Control by timer on control surface, main and emergency stop switch. Themaximum fillingquantity is 40% of the container volume and corresponds to 800kg consist ...

Peso: 2 tcurso: 500 mm: ja

x-travel: 600 mmy-travel: 410 mmz-travel: 520 mmcontrol: Siemens type: 840 D Tool changer: 30 Pos.spindle taper: ISO: 40 spindle turning speed range: 40-6000 U/mintable surface area: 840x420 mmTable load: 500 kgspindle power: 8,5 kWtotal power requirement: 15 KVAweight of the machine ca.: 2,7 tdimensions of the machine ca.: mMachine has 4 axesThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hi ...