outras máquinas para trabalhar o metal usadas para venda (10,678)

Plasma cutter with: Digital display. Surge protection. Plasma torch. Underground cable. Reducing valve with moisture separator. Equipped with IGBT technology Welding current 15 - 40 A Cutting capacity 1 - 16 mm Open-circuit voltage 96 V Compressed air connection min. 4 bar Connected load 3.6 kW Connection voltage 230 V Weight 9.0 kg Dimensions LxWxH 371 x 153 x 232 mm Condition: never used / new (5) Auction-ID: A7-50084-134

Box Width:750 Box Height:1000 dimensions of the machine ca.:1200 m2Powder Coating Line EISEMANN very less used and in very good condition. New Price of the plant 2.600.000,- EUROPower & Free conveyor system with 250 car trains, 5-Zone Spray Pre-Treatment System, stainless steel - water drying cooling zones.2 nos.of WAGNER stainless steel powder cabins each with ABB robots & double-automatic powder guns, as well aseach cabin is equipped with a hand-powder device.Powder Curing Oven, direct gas heated three-zoneSpray cleaning equipment, Stainless Steel - Sewage Treatment Plant, Evaporator with Reverse Osmosis System & Fresh-Air Device.Opening Cross Section Areal: Width 750 mm, Height 1000 mmTechnical Details: Pretreatment conveying speed 2.3 m / min.Pretreatment surface area approx. 200 m2 / h.Painting Surface approx. 120 m2 / h.Throughput of workpieces approx. 4,000 kThis Poweder Coatin ...

Sheet metal bending machine with special dimensions: - Capacity 700 x 4 mm - Conical bending - Swing-out upper roller - Safety device emergency exit line - Documentation - 400V Sheet width 700 mm Sheet thickness 4.0 mm Stand width 720 mm Top roller diameter 95 mm Total power requirement 1.1 KW Machine weight approx. 0.37 t Dimensions approx. 0.95 x 0.76 x 1.25 mm Auction-ID: A7-50084-68

measuring range X-axis:150- 300 mmmeasuring range Y-axis: mmTable dimensions: mmmeasurement range Z =:450 mmenlargement:20 X fine adjustment:+/- 5 mmcompressed air:6 bardimensions:2 x 1,5 x2 mmachine weight ab.:150 kg

length:1000 mmwidth:800 mmheight:1050 mmweight:200 kgSchubladenschrank mit 5 AuszügenMit AMF Spannsystem Elementen

Cable stripper and processor, can separate metals from the residual product. 937 operating hours Auction-ID: A3-46161-17426

max. wheel diameter:275 mmgear width:58 mmmax. module:8 min. module:0,5 weight of the machine ca.:10 tmax. number of teeth:200 min. number of teeth:5

Duo blast cabinet 10 PET sheets to protect the windows 10 PET plates to protect fluorescent lighting 2 foot pedals 2 blasting guns 6 ceramic nozzle inserts (6 mm diameter) Internal dimensions 2060 x 1270 x 86 mm Operating pressure 2.5 - 8.0 bar Machine weight approx. 0.23 t Dimensions L x D x H 2.08 x 0.73 x 0.8 m Condition: never used / new (5) Auction-ID: A7-50084-148

length:12192 mmwidth:2438 mmheight:2896 mmweight:4580 kgTotal weight:34000 kgcharge:29420 kgCooling ContainerInternal dimensions:Length 11585mmWidth 2290mmHeight 2545mmPallet spaces 23

plate thickness: mmsheet width: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m

weight of the machine ca.:11,2 tone spindle

tube diameter:40-90 mmwall strength:20 mmweight of the machine ca.:11 tdimensions of the machine ca.:4 x 1,6 x 1,35 mbending radius max.:270 mmThis machine is a mandrel bending machine that was designed exclusively for the production of pipe bends with pipes of 40 mm ? 90 mm outer diameter with a maximum wall thickness of 20 mm or for processing solid materials up to 70 mm outer diameter (max. section modulus 64.7 cm³) and is therefore intended only for this purpose. Scope of delivery, machine equipment, basic equipment ? Pipe length/usable length for mandrel bending: 3000 mm ? Radius range max. 270 mm ? Bending height 1050 mm ? Electro-hydraulic drive ? Clockwise bending direction ? With hollow shaft to achieve small radii ? Counter bearing rotates ? Rotates up to 180 degrees with a maximum tool radius of 270 mm ? Forward movement controlled via hydraulic cylinder with pressure valve  ...

screw size:60 mmclosing pressure:3500 kNweight of the machine ca.:25,5 t

Auction-ID: A1-49968-518

This sandblasting booth includes as standard: Front loader with two gas struts. Blasting gun 4-piece nozzle set Set of gloves Lighting Set of protective films Foot pedal. Pressure regulators Extraction with microfilter Original packaging Internal dimensions 1170 x 580 x 580 mm Operating pressure 2.2 - 5.5 bar Dimensions L x W x H 1.22 x 0.93 x 1.7 m Machine weight approx. 0.15 t The system is delivered in black Condition: never used / new (5) Auction-ID: A7-50084-94

Sheet metal roller Working width max. 610 mm. Sheet thickness max. 1 mm. Diameter of the rollers 38 mm. Packaging dimensions 95 x 27 x 36 cm. Weight 40 kg. Condition: never used / new (5) Auction-ID: A7-50084-46

x-travel:650 mmy-travel:450 mmz-travel:420 mmcontrol:MAKINO Hyper i U-axis:± 75 mmV-axis:± 75 mmmax. size of workpiece LxWxH:1000 x 800 x 400 mmworkpiece weight:max. 1500 kgTable dimensions:910 x 710 mmweight of the machine ca.:5 tDimensions (L/W/H):3 x 3 x 2,3 mmMemory:10 GB Wire EDM in good condition.

diameter:210 mmweight of the machine ca.:0,05 tturning speeds:4200 Bore:75 mmclamping diameter:254 mmdimensions of the machine ca.:0,6 x 0,5 x 0,4 m2-jaw power operating chuck with draw pipe and various jaw sets.

bore capacity in steel (diameter):12 mmthroat:300 mmbore stroke:80 mmtotal power requirement:1,5 kWweight of the machine ca.:1,2 tdimensions of the machine ca.:0,6 x 0,7 x 2,1 mAppr. 100 year old column boring machine, complete overhould and ready to operate- swivel table, base table- taper tool chuck- base motor with drive belt to overhead spindle

bore capacity in steel (diameter):40 mmarm length:1250 mmworkpiece height max.:1390 mmDist. spindle nose & working surface base:350 - 1260 Spindle travel:315 max. boring diameter:40 mmDistance between spindle axis and column:350 - 1260 spindle taper:4 MKRange of spindle speeds:22,4 - 2800 Number of spindle speeds:16 Number of spindle feeds:16 Table:500 x 630 Travel of spindle head:900 mmtotal power requirement:3,5 kWdimensions of the machine ca.:2150x1070x2840 mfeed:0,09 - 1,5 m/minweight of the machine ca.:3 t

Plasma Cutter with Cart - Incl. 7m hose package - Spare nozzles Welding current 20 - 100 A Cutting capacity max. 35mm mm Open circuit voltage 250 V Compressed air connection min. 4 bar Connected load 20 KVA Connection voltage 400 V Weight 70 kg Dimensions LxWxH 1.0 x 0.6 x 0.8 mm Auction-ID: A7-50084-99

length:1600 mmwidth:1000 mmplate height:200 mmweight of the machine ca.:1 tdimensions of the machine ca.:1,6 x 1,0 x 1,3 mHardstone measuring plate with support desk and 2 tailstocks

Used, functional. For sheet metal constructions/air ducts. Sheet thickness: 0.5–1.5 mm Flange height: 6–15 mm Loading conditions: Is loaded onto the truck Forklift and crane available Auction-ID: A7-50094-7

faceplate diameter:4000 mmswing diameter:4300 mmturning height:2500 mmmax. workpiece weight:63 ttotal power requirement:125 kWweight of the machine ca.:134 tdimensions:6100x10400x8400 mmUsed Vertical Turret Lathe with 2 plungers and CNC Siemens 840 table is hydrostatically. Machine equipped with a grinding head. CNC was overhauled in 2000.

working area:2500 mmFree moveable 6-axis measuring device- operating software- W-Lan- ball tracer

Technical specifications of the mobile blast vessel Capacity 40 liters. Length of the hose 2.5 m. Working pressure 60 - 125 PSI. Air consumption approx. 250 - 600 l / min Packaging dimensions 770 x 415 x 365 cm. Weight Approx. 20 kg Condition: never used / new (5) Auction-ID: A7-50084-9

Basket size LxWxH:600 mmMax. basket weight:80 kgNo. of washing chambers:1 Temperature for washing water:60 °CElectrical heating power:4 kWtotal power requirement:5 kWLoading:Höhe bis 300 tank capacity:50 lCapacity:60 l/minMachine size LxWxH:0,75 x 1,0 x 1,2 mStainless steel high pressure cleaning machine for industrial use with basket diameter 600 mmWorkpieces will be cleaned with hot water, cleaning compound and high pressure in turnable baskets- pneumatic spring supported machine lit- stainless steel driven basket- spraying bars and pump stainless steel design- loading basket with Jog function

- 2x Digital caliper. - External caliper. - Analogue dial gauge. - Barkomat adjustment set. - Altimeter. - Clay clock stand. - Voltcraft DT-300 LCD hand thermometer. Auction-ID: A1-49374-135

Box size 400x245x305mm; 15A/86V - 40A/96V; IP21S; digital display; Auction-ID: A1-50091-335