Prensas mecánicas (30)

A prensa mecânica NIDEC ARISA S-2-500-240-120-FD foi construída em 2006 em Espanha pela Nidec Press & Automation Co. (NP&A). É uma prensa extremamente versátil utilizada na produção em série de componentes para a indústria automóvel ou de maquinaria de forma ampla. Permite até as operações de conformação metálica mais exigentes, ou seja, perfuração e estampagem precisas de peças metálicas. Para além do seu propósito padrão, com as ferramentas adequadas e sistemas de alimentação de materiais, a máquina pode também ser usada como prensa de transferência ou prensa progressiva. Todos os processos são realizados com uma força de pressão elevada de 500 toneladas. O sistema de acionamento da prensa NIDEC ARISA S-2-500-240-120-FD baseia-se num volante de inércia e numa engrenagem excêntrica, cooperando com duas bielas. Esta solução garante uma transmissão de ...

Rapid Toggle Press Auction-ID: A7-45416-82

A prensa mecânica ARISA S-2-630-240-120-LD foi construída em 2005 em Espanha pela Arisa S.A. (atualmente Nidec Press & Automation Co. (NP&A)). A máquina disponível é uma excelente escolha para a produção em série de componentes utilizados na indústria automóvel ou de maquinaria, de forma ampla. Permite mesmo as operações de conformação metálica mais exigentes, como a perfuração e estampagem precisas de peças metálicas. Para além do seu propósito padrão, dependendo das ferramentas e dos sistemas de alimentação de materiais utilizados, a máquina pode também ser usada como prensa de transferência ou prensa progressiva. Todos os processos de maquinação são realizados com uma força de pressão elevada de 630 toneladas. O sistema de acionamento, sob a forma de volante e engrenagem excêntrica, em cooperação com duas bielas, assegura uma transmissão de biná ...

• Pneumatic press • Table dimensions 125 x 125 mm • Actuating by pedal • Operating conditions of this machine: unchecked. • Transport dimensions approx. 1200 x 800 x 600 mm. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-44536-118

A prensa mecânica ARISA S-2-400-260-FD foi construída em 2000 em Espanha pela Arisa S.A. (atualmente Nidec Press & Automation Co. (NP&A)). A máquina disponível é uma excelente escolha para a produção em série de componentes utilizados na indústria automóvel ou de maquinaria, de forma ampla. Permite perfuração e estampagem precisas de peças metálicas. Todos estes processos de maquinação são realizados com uma força de pressão elevada até 400 toneladas, que, combinada com um deslizante altamente dinâmico, garante os melhores resultados de maquinação. O ARISA S-2-400-260-FD apresenta um design robusto de pórtico com alívio de stress, com uma parede lateral aberta. Este design mantém alta rigidez, parâmetros estáveis e repetibilidade mesmo durante as operações mais intensivas com elevada força de prensa. Distingue-se pelo uso de duas bielas, uma transmissão ...

Model No.: KFLU 008.002 Type: Toggle Press (Manual) Press force: approx. 8 kN Stroke: 0–220 mm (adjustable) Table size: approx. 130 × 110 mm Special features: High force at the bottom dead center Fine adjustment of the offset possible Robust steel construction Ergonomic hand lever Application: Assembly, Crimping, Stamping, Embossing, Small Batch Production Weight incl. packaging approx. 50kg Auction-ID: A1-45208-18

Ajax 1.000 Ton Prensa de forjamento mecânica de lado reto S/N/N 4410 10" Curso Altura de fecho de 33" Cama 36" x 36" 80 braçadas por minuto Parcialmente reconstruído Ajax 1.000 Ton Prensa de forjamento mecânica de lado reto S/N/N 4621 10" Curso Altura de fecho de 32" Cama 36" x 32" 80 braçadas por minuto Reforços estão incluídos. Ambas as prensas estão em condições de funcionamento e sob potência.

machine ready for transport and to be assessed on viewing day Auction-ID: A1-44905-65

Potência nominal: 400 ton Golpe par minuto: 16-48 Curso ajustável: 10-250 mm Dimensão da mesa: 1200 x 1200 mm Dimensão RAM: 1200 x 1200 mm Tabela de distância – slide: 1000 mm Corrediça de ajuste: 200 mm Motovariador: 22-66 HP

machine ready for transport and to be assessed on viewing day. Machine has recently been repaired, see photos Auction-ID: A1-44905-64

Qty. 1 Prensa em segunda mão para a produção de vasos e discos de alumínio Mfc.: SITI Construído: 2005 Renovado por especialistas Duração: 3-4 meses Força: 4000 Ton Production de discos de alumínio & indução & potes normais Altura dos vasos: 120 / 140 mm A imprensa será revista, renovada e vendida conforme especificado a seguir: Nova moagem de pistão do cilindro Nova Modificação da Tabela Flange Bombas novas Novas juntas, etc. Novas peças elétricas e eletrónicas Novo programa

As good as new machine Operating hours in motion: 29.5 Hour meter: 2244 Strokes: 159328 incl. interchangeable decoiling device, strip straightener and Scrap ejection. Mains voltage: 3LNPE/400V/50Hz Control: Beckhoff/PNOZ multi Electrical wiring diagram: E$-M02070 Pre-fuse: 160 A Nominal power: 37 KW Nominal force: 2000 KN Working capacity: 16000 J Stroke rate in continuous stroke: 30-150 min-1 Max. stroke rate in single stroke: 30 min-1 Max. clutch cycles in single stroke: 20 per min Runtime: 0.158 s Min. safety distance: 317 mm Clutch pressure: 5.0 bar System pressure: 6.0 bar Stroke length: 20-220 mm Max. plunger adjustment: 150 mm Usual stopping point of the ram: OU Table dimensions: 1800x1100 Plunger dimension, max. tool dimension (WxD): 1800x1100 mm Max. weight tool top: 1700 kg Mass without additional equipment: 29000 kg Auction-ID: A7-44908-1

Auction-ID: A7-44908-4

Toggle hand presses >br>HK 1700 stroke 60 mm with crank with working height fine adjustment>br>height of the stand 450 mm>br>Even more pressure in production without additional effort.>br>Maximum pressure output shortly before the end of the stroke thanks to knee lever technology.>br>Particularly stable construction of spindle head and stand>br>pressure 17.0 kN>br>stroke 60 mm>br>projection 105 mm>br>working height from up to 75 -180 mm>br>table surface 170 x 130 mm>br>spindle diameter 25 mm>br>machine weight approx. 35 Kg>br>Dimensions L x W x H 260 x 130 x415 mm >br>condition: never used / new (5) Auction-ID: A7-44817-154

Toggle press>br>• Working height adjustable by simply loosening the clamping screws on the stand>br>• Fine working height adjustment with HK 800 = millimetre-precise adjustment of the >br> press head to the desired working height. Fine adjustment is >br> forcibly arranged in both directions via a threaded spindle>br>• Hand lever arranged in a user-friendly manner, return via spring>br>pressure 8.0 kN>br>stroke 40 mm>br>projection 90 mm>br>Working height of up to 50 - 200 mm>br>Table surface 120 x 160 mm>br>Machine weight approx. 22 Kg>br>Dimensions L x W x H 160 x 230 x 410 mm >br>Condition: never used / new (5) Auction-ID: A7-44817-187

Model No.: KFLU 008.002 Type: Toggle Press (Manual) Press force: approx. 8 kN Stroke: 0–220 mm (adjustable) Table size: approx. 130 × 110 mm Special features: High force at the bottom dead center Fine adjustment of the offset possible Robust steel construction Ergonomic hand lever Application: Assembly, Crimping, Stamping, Embossing, Small Batch Production Weight incl. packaging approx. 50kg Auction-ID: A1-45208-80

The Dorst TPA 70S is a used powder compaction press, known for its precise and reliable performance. It delivers a maximum pressing force of 700 kN with a withdrawal force of 400 kN, making it suitable for diverse compaction needs. The machine features a pressing travel of up to 30 mm, with a maximum filling height of 70 mm and operates at speeds between 14 to 40 strokes per minute. This ensures efficient throughput, ideal for high-demand production environments. With an upper punch stroke of 120 mm and adjustable travel of 200 mm, the Dorst TPA 70S offers flexibility in application. It requires a compressed air supply with an intake of approximately 200 liters per minute, and operates on a total connected load of about 20 kW. To enhance functionality, the machine is constructed robustly, maintaining a workplace-related sound level of 78 dB(A), and features a press housing capacity of 19 ...

The Dorst TPA 20/3 is a reliable used powder compaction press known for its robust construction and precise operations. It offers a maximum pressing force of 200 kN and a withdrawal force of up to 100 kN. With a maximum filling height of 140 mm and pressing travel extending to 70 mm, it accommodates a range of powder compaction tasks efficiently. The press is capable of operating at speeds ranging from 5 to 22 strokes per minute, supporting a variety of production needs. It features an upper punch stroke of 200 mm, with an adjustable travel of 160 mm for flexibility across different applications. The machines air supply intake is approximately 160 liters per minute, and it has a connected load of about 15 kW. Constructed with dimensions of around 2000 mm in width, 1700 mm in depth, and 3250 mm in height, the Dorst TPA 20/3 weighs approximately 4,900 kg. It maintains a workplace sound lev ...

CONTROLS  electronic controls SIEMENS S7 300 PRESS DESIGN  drive system: eccentric / crank   openings in uprights: yes   number of suspensions: 2   table cushion: no   quick die change system: yes PRESS FORCES  total force (nominal): 250 toPRESS TABLE  table surface (left-right): 2000 mm  table surface (front-back): 1100 mm  height above floor level: 1105 mm  opening in bed (left-right): 1700 mm  opening in bed (front-back): 305 mmSLIDE  table surface (left-right): 2080 mm  table surface (front-back): 1000 mm  stroke rate (max.): 120 /minSLIDE (MECHAN. PRESS)  slide adjustment: 120 mm  stroke adjustment: yes   stroke min.: 20 mm  stroke max.: 180 mmTOOL ASSEMBLY DIMENSIONS  shut height (str ...

The Dorst TPA 15/3 is a used mechanical powder compaction press designed for precision and efficiency in industrial applications. It provides a maximum pressing force of 150 kN and a withdrawal force of 100 kN, supporting a variety of compaction tasks. With an upper punch stroke of 100 mm and a range of 70 mm for adjusting the travel, this machine offers flexibility for different requirements. Operating at speeds of 7 to 32 strokes per minute, it ensures a reliable production throughput. This press allows for a maximum filling height of 70 mm and pressing travel up to 35 mm, suitable for a range of powder compaction needs. The machine is fitted with a compressed air system that has an intake of around 70 liters per minute and a total connected load of approximately 6 kW. It is compact yet robust, with dimensions of about 1400 mm in width, 1300 mm in depth, and 2650 mm in height, weighing ...

The Dorst TPA 6 is a used mechanical powder compaction press suitable for various industrial applications due to its robust performance and flexibility. It boasts a maximum pressing force of 60 kN and a withdrawal force of 30 kN, addressing a wide range of compaction needs. The machine supports a maximum filling height of 70 mm and a pressing travel of 30 mm, with an upper punch stroke of 95 mm and an adjustable travel of 50 mm. This ensures precise control over the compaction process. Operating at speeds between 7 to 32 strokes per minute, the Dorst TPA 6 consumes approximately 70 liters of compressed air per minute and has a total connected load of about 3.5 kW. It measures 2220 mm in width, 1060 mm in depth, and 2250 mm in height, weighing around 1,200 kg. With a gear oil capacity of 12 liters and a workplace-related sound level of 75 dB(A), it is designed to endure continuous use whi ...

The Dorst TPA 50/4 is a reliable, used mechanical powder compaction press designed for precision and efficiency. Offering a robust maximum pressing force of 500 kN and a maximum withdrawal force of 400 kN, it supports a variety of powder compaction tasks. With a filling height up to 180 mm and a pressing stroke of up to 90 mm, this machine is adaptable to diverse requirements. Equipped with an upper punch stroke of 120 mm and an adjustable travel of 220 mm, the Dorst TPA 50/4 provides flexibility for different applications. It operates at a speed of 7 to 32 strokes per minute, ensuring efficient production. The press requires a compressed air supply, consuming approximately 200 liters per minute, with a total connected load of around 18 kW. Constructed with durability in mind, the press measures approximately 2000 mm in width, 1700 mm in depth, and 3250 mm in height, and weighs around 5, ...

The Dorst TPA 50/2 is a used mechanical powder compaction press engineered for precision and efficiency, making it suitable for demanding industry applications. With a maximum pressing force of 500 kN and a maximum withdrawal force of 400 kN, this machine is robust and reliable. This model press allows you a maximum filling height of 180 mm and a pressing travel of up to 90 mm. Designed for versatility, it features an upper punch stroke of 120 mm and an adjustable travel of 220 mm, operating at speeds ranging from 7 to 32 strokes per minute. It requires a compressed air supply with an intake of approximately 200 liters per minute and has a total connected load of around 18 kW. The construction is sturdy and occupies a footprint with dimensions of approximately 2000 mm in width, 1700 mm in depth, and 3250 mm in height, weighing approximately 5,500 kg. The press operates at a workplace-rel ...

The Dorst TPA 5 is a refurbished mechanical powder compaction press, designed for precision and efficiency in industrial applications. It offers powerful performance with a maximum pressing force of 50 kN and a withdrawal force of up to 40 kN. This makes it suitable for a variety of powder compaction tasks, with a filling height of 50 mm and pressing travel capability of 25 mm. This machine provides flexibility with an upper punch stroke of 85 mm and an adjustable travel span of 70 mm, operating at 6 to 30 strokes per minute. It consumes around 50 liters of compressed air per minute and has a total electrical load of approximately 4.00 kW. With durable construction, the Dorst TPA 5 maintains a quiet operation at a sound level of 70 dB(A). The presss compact dimensions, approximately 1200 mm in both width and depth and a height of 2150 mm, with a weight of about 1,200 kg, make it a manage ...

CONTROLS  PLC SIEMENS S7 PRESS DESIGN  drive system: knuckle-joint   frame design: H-frame, monoblock   openings in uprights: yes   number of suspensions: 2   feedstock transport direction: left to right PRESS FORCES  total force (nominal): 315 to  nominal work capacity: 38 kNmPRESS TABLE  table surface (left-right): 2000 mm  table surface (front-back): 1200 mm  thickness of bolster plate: 200 mmSLIDE  slide force: 315 to  table surface (left-right): 1995 mm  table surface (front-back): 1100 mm  stroke: 160 mm  stroke rate (max.): 80 /minSLIDE (MECHAN. PRESS)  slide adjustment: 140 mm  stroke rate (min.): 20 /min  stroke rate (max.): 80 /min  main drive power: 90 kWTOOL ASSEMBLY DIMENSIONS& ...

The Dorst DK 250 is a robust used powder compaction press engineered by DORST, offering a substantial pressing force of up to 2500 kN. It supports operations with a maximum withdrawal force of 150 kN and a supporting force in the pressing position reaching 120 kN. Designed for precision, this model includes a 220 mm upper punch stroke with an adjustable travel of 120 mm. The press accommodates a pressing travel and withdrawal travel, each up to 50 mm, making it versatile for various pressing tasks. Operational performance ranges from 6 to 25 strokes per minute, and it provides a filling height of up to 100 mm. The Dorst DK 250 is efficient, consuming approximately 500 liters of air per minute and demanding a connected load of around 60.0 kW. Its dimensions, at 2500 mm in width, 1900 mm in depth, and 4800 mm in height, alongside a weight of approximately 18,500 kg, underscore its solid co ...

Pressing Force max.: 2000 Kn, Withdrawal force max.: 1500 Kn, Supporting force in pressing position max.: 1200 Kn, Die return force max.: 50 Kn, Upper punch stroke: 220 mm, Upper punch adjusting travel: 200 mm, Number of strokes: 5-18 1/min, Filling height max.: 180 mm, Pressing travel max.: 90 mm, Withdrawal travel max.: 90 mm, Top pressing travel max: 18 mm, Upper punch pneumatic preload max.: 60 mm, Compressed air supply , Air consumption, Intake air aprox.: 140 1/min, Total connected load aprox.: 26,0 Kw, Width aprox.: 2350 mm, Depth aprox.: 3500 mm, Height aprox.: 5900 mm, Weight of the press aprox.: 19.900 Kg, Press housing: 260 l (gear oil), Workplace-related sound: 78 dB (A)

Mechanical Dorst TPA 45, Pressing Force max. 450 Kn, Withdrawal force max. 250 Kn, Supporting force in pressing position max. 130 Kn, Die return force max. 60 Kn, Upper punch stroke 120 mm, Upper punch adjusting travel 70 mm, Number of strokes 6-22 1/min, Filling height max. 120 mm, Pressing travel max. 60 mm, Withdrawal travel max. 60 mm, Top pressing travel max 6 mm, Upper punch pneumatic preload max. 30 mm, Compressed air supply , Air consumption , Intake air aprox. 70 l/min, Total connected load aprox. 14,0 Kw, Press dimensions:, Width aprox. 1550 mm, Depth aprox. 1650 mm, Height aprox. 2200 mm, Weight of the press aprox. 3900 Kg, Oil filling quantity :, Press housing 45 l (gear oil), Workplace-related sound 79 dB (A)

Pressing Force max.: 1000 Kn, Withdrawal force max.: 800 Kn, Supporting force in pressing position max.: 600 Kn, Die return force max.: 40 Kn, Upper punch stroke: 220 mm, Upper punch adjusting travel: 200 mm, Number of strokes: 5-18 1/min, Filling height max.: 180 mm, Pressing travel max.: 85 mm, Withdrawal travel max.: 95 mm, Top pressing travel max: 18 mm, Upper punch pneumatic preload max.: 80 mm, Compressed air supply , Air consumption, Intake air aprox.: 140 1/min, Total connected load aprox.: 23,0 Kw, Width aprox.: 1950 mm, Depth aprox.: 1550 mm, Height aprox.: 3900 mm, Weight of the press aprox.: 9.900 Kg, Press housing: 180 l (gear oil), Workplace-related sound: 78 dB (A)

Pressing Force max: 1400 Kn, Withdrawal force max: 1100 Kn, Die return force max: 70 Kn, Upper punch stroke: 220 mm, Upper punch adjusting travel: 220 mm, Number of strokes: 5-18 1/min, Filling height max: 180 mm, Pressing travel max: 90 mm, Withdrawal travel max: 90 mm, Top pressing travel max: 18 mm, Total connected load aprox: 25,0 Kw, Width aprox: 1950 mm, Depth aprox: 1750 mm, ISO 9001: 2008 CERTIFIED COMPANY, Height aprox: 4380 mm, Press housing: 240 l (gear oil), Workplace-related sound: 78 dB A