retificadoras madeira usadas para venda (663)

4 Band VIET Sander Auction-ID: A3-46142-6001

Auction-ID: A3-46142-6002

Vertical industrial belt sander Antique industrial belt sander mounted on metal frame, intended for sanding, deburring and finishing metal or mechanical parts. The machine is equipped with a vertical abrasive belt surrounded by a metal upper housing, with a front working area and a support table. It has an electric motor integrated into the lower part of the frame, as well as a side electrical switch. The transmission and mechanical elements are protected by the original housings. The machine is advertised as functional. The whole is in an old condition and strongly marked by use. The paint is peeling and the structure has many traces of oxidation, scratches and marks of use. The abrasive belt is worn, dusty and will probably need to be replaced before intensive use. General cleaning as well as a check of the electrical installation, motor, bearings and drive are recommended. The m ...

Auction-ID: A1-50656-138

Only the bench grinder for floor mounting will be auctioned. All devices in the background are not part of the auction. Auction-ID: A1-51071-6

Working width: 1600 mmNumber of sanding units: 2 st.Workpiece thickness max.: 200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Only the floor-mounted bench grinder is up for auction with the grinding wheels. Everything else that can be seen in the pictures is not up for auction. Auction-ID: A1-51071-28

Used horizontal mortiser (slot mortising machine). Condition: Used, in working condition Auction-ID: A7-50988-148

Condition: Used, ready for operation. Manufacture: Greek. Additional Notes: Sharpening machine for wood band saw blades. Maintains the cutting edge of the blade, ensuring a clean cut and extending blade life, reducing the need for frequent replacement. Auction-ID: A7-50988-98

Model: N001/1941. Used disc-type sharpening machine for sharpening wood band saw blades. Suitable for all wood band saw blades, helps maintain the cutting edge for smooth, precise cutting. In working condition, checked by our technicians. Auction-ID: A7-50988-99

Auction-ID: A7-50988-89

Auction-ID: A7-50988-88

Table dimensions: L x B 2.800 x 950 mmthroat: r & l 550 x 310 mmmotor power: 4,0 kwsanding belt measurements: 150 x 7.800 mm: : : 2.600 mm Working width: 1.000 mmMotor output: kWLength of sanding paper: mmDust suction hood: 180 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-50699-50

Wide belt sanding machine with two sanding units, conveyor feed table, pneumatic belt tensioning assemblies and overhead extraction connections. Equipped with a front control panel and emergency stop button. Year of manufacture: 2002. Serial number: AL/024026. Electrical supply: 400 V, three-phase, 50 Hz. Rated current: 59 A. Maximum pneumatic pressure: 8 bar. Approximate weight: 2,200 kg. Made in Italy. Auction-ID: A1-50699-40

grinding length: 450 / 400 mmgrinding width: 300 mmworkpiece height: 375 mmelectro magnetic clamping plate: 400 x 250 mmgrinding wheel size: Ø 300 x 50 x 76,2 mmdressing device automatic: + Kompensation coolant tank: 210 loil volume: H-LP 68 / ca. 110 lControl: SPS NK total power requirement: 12 kWweight of the machine ca.: 3 tdimensions of the machine ca.: 3,5 x 2,5 x 2,5 mFrom a training workshop—first-hand The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 6 st.sanding width: 45-165 mmSanding height max.: 45-92 mmweight: 2200 kgEcoline Q-SAND 6For sale on behalf of a customer--------------------------------------------Full text as PDF attachment!Short description:Machine with infeed conveyor and automatic height detection.It has two grinding discs on top and two grinding discs on the bottom, each connected to a brush unit.Technical manufacturers description:Ecoline Q-Sand: the ideal grinder for squared timber and more.Designed to work on both sides of the workpiece with three-dimensional adjustment, the Q-Sand guarantees maximum precision and uniformity. It is equipped with grinding discs, flap brushes, and a double disc for more effective material removal, thus improving adhesion for subsequent treatments. The Q-Sand can be installed in a production line or, due to its complete operational autonomy, can also be us ...

- Sanding width 2600 mm. - Variable feed speed. - It consists of: • Automatic charging station. • STEINEMANN sander for board calibration with sanding rollers. • STEINEMANN sander for finishing with sanding pads. • STEINEMANN dust filter system. • CASSEL digital metal detector. • Slitting station. • Automatic unloading station with 3-position gantry stacker. The roller tables on which the boards are unloaded are NOT included. • Intermediate conveyors. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-49881-19

Number of sanding units: 4 Stsanding width: 190 mmSanding height max.: 4-180 mmweight: 4200 kgHess Expert 4-belt single wood sanding machinemachine will be checked by our technicians--------------------------------------Ø Grinding at the bottom/topØ With 2 offset grinding units each (bottom and top)Ø Grinding units (bottom and top) connected in series according to theDressing principleØ Pre-sanding with coarse grit (calibrate)Ø Regrinding with fine grit (finish)Ø Central motorized height adjustment of the lower grinding unitsØ Central motorized and synchronous height adjustment of the entire upperGrinding and brushing units including the upper transport unitsØ Oscillating sanding belt utilization (during the sanding process)Ø Absolute power connection thanks to 5.5 KW motors and large dimensionsdrive drumsØ Oxide ceramic grinding shoe for- exact surface geometry- no adjustment  ...

Number of sanding units: 2 st.sanding width: 180 mmSanding height max.: 150 mmMAWEG Robert Hildebrand Saturn DuoProfessional two-belt finish sanding machine with brushing unitDouble-sided, sands from top and bottomPneumatic belt oscillationPneumatic belt tensioningFeed via top and bottom conveyor belts with spring-loadedhold-down rollers, infinitely variable speed (5–15 m/min)Workpiece thickness adjustment with pre-selectable stock removal amount atmachine infeed, based on sensing the raw timber thicknessAdjustment to wood thickness via motorized positioning of themachines upper sectionDigital thickness setting via mechanical counter with 0.1 mm display andzero-point adjustmentSafety switch for oversized wood thickness at machine infeedDouble-sided brushing unit with integrated workpiece blow-offSanding belt blow-off (top and bottom)Belt breakage monitoring switch with automatic shutdo ...

Working width: 910 mmNumber of sanding units: 1 st.Workpiece thickness max.: 3 - 160 mmsanding belt measurements: 2.200 x 1.010 mmFeed motor: 0,55/0,75 kWFeed speed: 4,5 / 9 m/min.Weight: 1.210 kg: 18,5 m/secoutput: 11 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 2 st.sanding width: 190 mmSanding height max.: 4-150 mmHess Junior single wood sanding machine--------------------------------Machine in checking process at the moment!Basic structure:Stable, heavy welded construction made of thick-walled rectangular hollow profiles with additional, statically calculated reinforcements for optimalVibration dampening.Staggered grinding units with large dimensionsBelt drive drums for slip-free belt running. Two-point suction for directand airborne dust extraction with integrated blow-off device. grinding unitsin heavy steel plate construction as the basis for vibration-damped,quiet tape running. All guides as a ball linear set on hardened andpolished waves. Permanent precision thanks to dust and dirt protectionthe ball linear sets. Contact roller and sanding pad in a balanced ratiofor sanding belt grain load. The large-sized drive  ...

Table dimensions: 1250 x 750 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 500 mmgrinding width: 200 mmworkpiece height: 250 mmturning speeds: 1000 - 4000 U/mintable surface area: 600 x 200 mmgrinding wheel size: 225 x 20 x 51 mmgrinding spindle drive: 1,5 kWtable feed: 1 - 20 m/mintotal power requirement: 2,6 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 2,6 x 1,6 x 1,8 mAutomatic feed, 2-axis digital display, stepless speed control,Water-cooled sine angle magnetic clamping plate 400x135mm, 10mm magnetic pitchSony digital display with scales for transverse and height adjustmentSwing-out dresser on the grinding headTable direction reversal with contactless inductive switchesLOSMA belt filter coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 4 St.sanding width: 190 mmSanding height max.: 180 mmLÖWER-DoubleSander Solid DSM 2004----------------------------------Double-sided four-belt single wood sander forSanding solid wood such as window frames etc.Highly stable top design with innovative details. Suitablefor high continuous loads even with higher chip removals.- sanding units arranged one after the other for pre-grinding,Fine sanding and finishing sanding, each from above and below1. Belt sanding unit with heavy steel roller2. Belt sanding unit with rubberized roller and shoe3. Finishing unit with fiber brush- Directly driven grinding rollers for slip-freePower transmission- maintenance and wear-free CERMET-coated grinding wheelsshoes with very good thermal conductivity and absoluteDimensional accuracy- External cooling of the grinding zones for cooler grindingand longer sanding belt service life- f ...

Table dimensions: 1200 x 500 mmsanding belt measurements: 90 mmWeight: 150 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 2 st.sanding width: 190 mmSanding height max.: 4-180 mmHESS - GLORIA 2 BELT SINGLE WOOD SANDING MACHINE-----------------------------------------------------Manufactur ers description:-----------------------------------------------------Compa ct design designed according to modern principles. Quiet andvibration-free operation thanks to rigid, stable machine housing andspecial insulation. Work safety device in accordance with the EC Machinery Directive with the dust-tested certificate.Offset grinding units with large-dimensioned tension rollers forgood heat dissipation and stable sanding belt guidance. Sanding units withforced sanding belt oscillation. 2-point sanding dust extraction directlyon the sanding roller. Airborne dust extraction on the large tension rollers. Integratedsanding belt blower for longer service life of the sanding belts. Integrated brushing an ...

Number of sanding units: 4 St.sanding width: 190 mmSanding height max.: 180 mmControl: ja weight: 3300 kgDimensions (L/W/H): 2600x920x1890 mmDust suction hood: 2x180, 2x120 mmLöwer DSM 2004 Double-Sided Sanding Machine---------------------------------------------4-Belt Sander + Disc Unit (Top/Bottom)Manufacturers Description:--------------------------------------------- Double-sided, four-belt, single-wood sander for sandingsolid wood such as window frames, etc.Highly stable, top-quality design with innovative details. Suitable for highcontinuous loads, even with high material removal rates.- Sequentially arranged grinding units for roughing, fine grinding,and finishing, each from above and below1. Belt grinding unit with heavy steel roller2. Belt grinding unit with rubberized roller and shoe3. Finishing unit with fiber brush (see optional equipment below)- Direct-drive grinding rollers ...

Number of sanding units: 8 St.sanding width: 25-240 mmSanding height max.: 15-140 mmB ROBA Fentech, Fully automatic sanding machineDesigned for sanding individual wooden components in window manufacturing, it is suitable for the following applications:- Fine sanding of wood- Sanding after impregnation- Intermediate lacquer sandingAdvantages of the ROBA Fentech system:- Automatic workpiece detection via scanner at the machine infeed- Motorized positioning of sanding units- Oscillating side units optimize abrasive utilization- 400 mm diameter sanding tools optimize sanding quality- Angled profiles are sanded at their optimal angle- Can be used as a straight-through machine or in reversing mode for one-person operation- Vacuum transport system for processing short parts- Enclosed design for enhanced workplace safety and a dust-free environment- Compact, space-saving design- Freely selectabl ...

Number of sanding units: 10 St.sanding width: 25-240 mmSanding height max.: 15-140 mmMB ROBA Fentech ORBITAL, fully automatic sanding machineDesigned for sanding individual wooden components in window manufacturing, it is suitable for the following applications:- Fine wood sanding- Impregnation sanding- Intermediate lacquer sandingAdvantages of the ROBA Fentech principle:- Automatic workpiece detection via scanner at the machine infeed- Motorized positioning of sanding units- Oscillating side units optimize abrasive utilization- 400 mm sanding tool diameter optimizes sanding quality- Angled profiles are sanded at their optimal angle- Can be used as a through-feed machine or in reversing mode for one-person operation- Vacuum transport system for processing short parts- Enclosed design for enhanced workplace safety and a dust-free environment- Compact, space-saving design- Freely selectabl ...