retificadoras usadas para venda (2,503)

: neu : ca. 6 Monate ab Auftragse : Taiwan : 50290 €: 950.48 €: 610 mm: 600 mm: 610 x 305 mm: 300 x 600 mm: 650 mm: 700 mm: 5 - 25 m/min: 1.100 mm/min: 1 - 12 mm: 370 mm: 1.5 kW: 0.004 kW: 0.19 kW: 7,4 kW: 2670 mm: 1810 mm: 2050 mm: 2100 kg: 355 x 50 x 127 mm: 1.450 U/min: 3,7 kW: 4 mm: 0,02 mm: 0,2 mm: 0,002 mmcontrol panel on swiveling armaut. vertical feedhardened slide ways in all 3 axes with needle rollersgrinding wheel spindle on 4 high precision angular contact bearingselectro-magnetic chuckcoolant equiptment with aut. paper filter and magnetic separatormanual extractor with diamondgrinding wheelgrinding wheel flangegrinding wheel balancing scalebalance arborLED machine lampmachine and equipment according to the CE-regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 11300 €: 216.96 €: 5 kW: 265 kg: 10-114 mm: 2 : 3-22 m/s: (2x) 50 x 940 mmto grind and polishfor round and oval tubesopening of sanding belts by footpedalmachine and equipment accordingto the CE regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2015 : 5434 : prompt, Zwischenverkauf v : China : 2200 €: 1 : 1580 €: 2.000 x 50 mm: 250 x 50 mm: 400 - 2800 1/min: 35 mm: 2.2 kW: 1160 mm: 700 mm: 1850 mm: 150 kgbelt grinding- and polishing machine in one devicecontinuous variable revs by frequency converter2 clamping mandrelsquick action clamping chuckincl. underframeusers manual in ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : 162560 €: 3072.38 €: 1200 mm: 730 mm: 1200 x 600 mm: 1200 x 600 mm: 1300 mm: 5 - 30 m/min: 0-2250 mm/min: 0,001-32 mm: 685 mm: 560 mm: 0-675 mm/min: 500-2200 1/min: 11 kW: 5.5 kW: 3.1 kW: 3.1 kW: 4790 mm: 3207 mm: 2305 mm: 8100 kg: 1150 kg: 1600 kg: 405 x 75 x 127 mm: 0,0001 mmiSurface control with Touch screen for 3 axes fully automatic surface and plunge grinding system10.4” TFT high resolution color control to ensure ease of operationRough increment, finish increment, spark out (0-9 times), and automatic grinding cycleCycle interrupt, flip over for part inspection &, final dimensions setWheelhead will rise up to end, start or reference positionnd table parks at left or right side after cycle is completedDisplay accuracy 0.0001mmI/O diagnosis &, alarm displayMax. table speed (X axis) 30 m/minIntegrated machine-body temperature controlDoub ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 119920 €: 2266.49 €: 610 mm: 600 mm: 600 x 300 mm: 600 x 300 mm: 0 - 20 m/min: 0 - 3000 mm/min: 0,001 mm: 350 mm: 440 mm: 0 - 3000 mm/min: 0.001 mm: 500 - 1800 1/min: 11 kW: 3160 mm: 2450 mm: 2080 mm: 3400 x 2200 x 2530 mm: 4000 kg: 975 mm: 195 kg: 370 kg: 355 x 50 x 127 mm: 1,1 / 1,1 kW: 3.9 kW: 0,005 mm: 0,003 mmSmart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel- RS232, USB I/O connection- SMART Grind Cam (dxf transfer in G code)-PC based control with graphical dialog programming or G-code programmingInfinitely variable speedSurface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycleSpindle with 4 angular contact ball bearings (P4, class 7)Longitudinal and cross guides with heavy duty needle roller bearing for lo ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 109520 €: 2069.93 €: 610 mm: 600 mm: 600 x 300 mm: 600 x 300 mm: 5 - 25 m/min: 0 - 3000 mm/min: 0,001 mm: 350 mm: 440 mm: 0 - 3000 mm/min: 0.001 mm: 500 - 1800 1/min: 11 kW: 2.2 kW: 4020 mm: 2450 mm: 2080 mm: 3400 x 2220 x 2530 mm: 3700 kg: 975 mm: 195 kg: 370 kg: 355 x 50 x 127 mm: 1,1 / 1,1 kW: 0,005 mm: 0,005 mmSmart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel- RS232, USB I/O connection- SMART Grind Cam (dxf transfer in G code)-PC based control with graphical dialog programming or G-code programmingInfinitely variable speedSurface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycleSpindle with 4 angular contact ball bearings (P4, class 7)Longitudinal and cross guides with heavy duty needle roller bearing for lo ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 171210 €: 3235.87 €: 610 mm: 590 mm: 600 x 300 mm: 600 x 300 mm: 0 - 25 m/min: 0 - 4000 mm/min: 0,001 mm: 350 mm: 450 mm: 0 - 3800 mm/min: 0.001 mm: 600 - 3600 1/min: 11 kW: 3103 mm: 3933 mm: 2480 mm: 5800 kg: 810 mm: 314 kg: 420 kg: 405 x 50 x 127 mm: 2,4 / 3,9 kW: 3.9 kW: 0,005 mm: 0,003 mmRigid machine construction with a movable columnfor effective stability to ensure high grinding performance and machining accuracySmart iControlIV control with 15", touchscreen with electronic wired handwheelPC-based control with graphical dialog programming or G-code programmingInfinitely variable speedSurface grinding cycle, cross grinding cycle, plunge grinding cycle, multi-groove grinding cycle, contour grinding cycle, dressing cycleSpindle with 6 angular contact ball bearings (4 front and 2 rear)All 3 axes with precision ball screws and AC ser ...

grinding diameter: 500 mmgrinding length: 1000 mmcentre height: 250 mmControl: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m-major maintenance-New table geometry-partial painting of the interior grinding wheel equipment LEFT 400x63x127mm (standard)grinding wheel equipment RIGHT 300x40x127mmInternal grinding unit Ø120mm for HF spindles CNC control KELCO 120 C-axis for non-circular grinding. Kel-PolyB-AXIS: CNC-controlled B-axis KELCO 120: v constant 35m/s or 45m/sHigh-frequency internal grinding spindle Operating unit for MFV and MFZ spindles Hydraulic quill retraction for the tailstockNO micro-adjustment on the tailstockSpring-loaded quill insertTop table cooling Standard workpiece headstock MK 5 DIN 55026 size 5Micro-adjustment for the standard workhead Dressing device on the lower table Active longitudinal positioning KELPOS, MARPOSS, moun ...

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 2580 €: 150 mm: 150 x 2000 mm: 200 x 150 mm: 530 mm: 3.5 kW: 35 m/s: 475 - 1240 mm: 1100 mm: 550 mm: 1035 mm: 115 kgIndustrial-belt grinding machinePowerful motorEnclosed grinding head ensure a very effective extraction systemThermal overload protectionEmergency stopElectronic motor brakeAdjustable supportEye protectionStepless adjustable working heightSelf adjusting belt tensionerOperating manual in German or EnglishALTERNATIVEVersion TAS 150X/2 with 2 speeds € 2.960,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 247940 €: 2100 mm: 850 mm: 2000 x 600 mm: 2x 1000 x 600 mm: 0 - 20 m/min: 0 - 5000 mm/min: 0,001 mm: 685 mm: 0 - 2000 mm/min: 0.001 mm: 675 mm: 500 - 2200 1/min: 11 kW: 7710 mm: 3320 mm: 2850 mm: 6530x3200x3350 mm brutto mm: 10200 kg: 900 mm: 1240 kg: 2000 kg: 405 x 50 x 127 mm: 3,1 / 3,1 kW: 7.5 kW: X: 0,008, Y/Z: 0,005 mm: X: 0,006, Y/Z: 0,003 mmSmart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel- RS232, USB I/O connection- SMART Grind Cam (dxf transfer in G code)-PC based control with graphical dialog programming or G-code programmingInfinitely variable speedSurface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycleSpindle with 6 angular contact ball bearings (P4, class 7)Longitudinal guides with double-V-shape w ...

: neu : ca. 2 Wochen ab Auftragse : Italien : 17940 €: 344.45 €: 350 mm: 300 mm: 500x160 mm: 350x150 mm: 300x150x55 mm: 2800 1/min: 3,6 kW: 1020 mm: 820 mm: 2170 mm: 440 kg: Dm. 200x78x78 mmThis Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it isequippedwith a long column supported by four bearings and is opportunely stiffenedby a sturdy column support.This Surface grinding machine, due to its stiffness and geometrical stability,is highly suitable for grinding with precision pieces of notable height: single or mass-produceddie-shop components, moulds, punches, gears and others.Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motorto the axis,equipping this model of Grinding machine with fixed table,allow preserving perfect work conditions over the years, too.CAST IRON BED to maintain the geometric s ...

grinding length: 600 mmgrinding width: max. 320 mmworkpiece height: max. 500 mmmagnetic clamping plate: 300 x 605 mmhoriz. table movement: longitudinal: man. max. 750 mmhorizontal table movement: cross: max 340 mmsanding disc diameter: 355 mmtable load: max. 420 kggrinding wheel width: 50 mmbore: 127 mmspindle turning speed range: 1500 U/minrapid traverse vertical: 400 mm/minControl: weight of the machine ca.: 2500 kgdimensions of the machine ca.: ca. 2800x2000x1800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 5549 : prompt, Zwischenverkauf v : Taiwan : 63870 €: 1207.14 €: 1 : 1 : 610 mm: 610 mm: 600 x 300 mm: 300 x 600 mm: 650 mm: 700 mm: 5 - 25 m/min: 0 - 2,250 mm/min: 3 - 32 (0,001) mm: 320 mm: 5,5 kW kW: 0.74 kW: 1 kW: 1 kW: 2950 mm: 1490 mm: 2080 mm: 2200 kg: 355 x 50 x 127 mm: 1.450 U/min: 0,001 mm10.4", graphic NC control on a swivel arm with touchscreen for:Operating mode selectionCycle selection and program creationSurface grindingCross grindingPlunge grindingDressing with automatic compensationSemi-automatic balancing in the machineAutomatic spindle speed for constant surface speedSpindle load visualizationUnbalance controlGraphical status monitoringAlarm listaut. vertical feedservo drive for grinding wheel feed and table cross feedhardened slide ways in all 3 axes with needle rollerselectro-magnetic chuckcoolant equiptment with aut. paper filter and magnetic s ...

width of the strips: 50.0 mmband length: 940 mmband speed: 3.0 - 22 m/minturning speeds: 1450 U/mintube diameter: 16.0 - 114 mmradius: 180 °total power requirement: 4.75 kWweight of the machine ca.: 265 kgrange L-W-H: 1000 x 750 x 1300 mmFurnishing:- stationary pipe belt grinders- Automatic material feed with separate drive motor- Replacement sanding belts- Stepless speed adjustment- Manual adjustment of tube tension- Polish bent pipes up to 180 (angle).- Manual work possible without feed- CE mark / declaration of conformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 100 mmband length: 2000 mmband speed: 15/30 m/stotal power requirement: 3,0 kWweight of the machine ca.: 159 kgdimensions of the machine ca.: 768 x 1185 x 1417 mmMobile belt sander PASOVEC 75 RUNNERPasovec 75 RUNNER - the special belt grinder developed forSurface grinding applications, especially for grinding weld seams in thematerial surface. Pasovec 75 Runner removes unwanted layers that occur whenSheet metal rolling or after sheet metal cutting with plasma oroxygen arise.Innovative, multifunctional machineStepless adjustment of the grinding depthEquipped with a dead mans switchStation for flat grinding small workpiecesLow running costsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 232970 €: 1700 mm: 850 mm: 1600 x 600 mm: 2x 800 x 600 mm: 0 - 20 m/min: 0 - 5000 mm/min: 0,001 mm: 685 mm: 0 - 2000 mm/min: 0.001 mm: 675 mm: 500 - 2200 1/min: 11 kW: 6165 mm: 3320 mm: 2850 mm: 5730x3200x3350 mm brutto mm: 9500 kg: 900 mm: 1335 kg: 1850 kg: 405 x 50 x 127 mm: 3,1 / 3,1 kW: 7.5 kW: X: 0,008, Y/Z: 0,005 mm: X: 0,006, Y/Z: 0,003 mmSmart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel- RS232, USB I/O connection- SMART Grind Cam (dxf transfer in G code)-PC based control with graphical dialog programming or G-code programmingInfinitely variable speedSurface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycleSpindle with 6 angular contact ball bearings (P4, class 7)Longitudinal guides with double-V-shape wit ...

grinding band dimension: 75 x 2000 mmband speed: 33 m/secweight of the machine ca.: 90 kgengine output: 4 kWturning speeds: 2800 U/minAccessories / equipment:- Vibration-free running smoothness- Adjustable working height- S1 motors with 100% duty cycle- Surface and contact grinding possible- Removable protective cover for surface grinding- Connection piece for double suction- Built according to the CE standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel size: 200 x 25 mmShaft diameter: 20 mmturning speeds: 2.800 U/minsaw band speed: 20 m/stotal power requirement: 0,75 kWmachine weight ab.: 17 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rotary table dia.: mmmax. dia. of grinding wheel: mmwith manual ongoing: 0manually feed: 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 2000 mmband length: 75 mmband speed: 16,5/33 m/sturning speeds: 1400/2800 U/minweight of the machine ca.: 75 kgVolume: 83 dBThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding band dimension: 150 x 2000 mmband speed: 33 m/sek.total power requirement: 3 kWweight of the machine ca.: 95 kgturning speeds: 2800 U/minStandard equipment:- Removable dust catcher- Fine adjustment of the band adjustment- Sanding belt- Eye protection- Motor protection switch- Operation manual- Sanding table- working height adjustment- surface grinding padThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 156920 €: 2965.79 €: 1200 mm: 850 mm: 1200 x 500 mm: 1200 mm: 1200 500 mm: 5 - 30 m/min: 0 - 5000 mm/min: 0,001 mm: 560 mm: 0 - 2000 mm/min: 0.001 mm: 500 - 2200 1/min: 11 kW: 3.7 kW: 3.1 kW: 2.4 kW: 4600 mm: 2950 mm: 2745 mm: 4610 x 2290 x 2500 mm: 6400 kg: 900 mm: 930 kg: 1250 kg: 405 x 50 x 127 mmSmart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel- RS232, USB I/O connection- SMART Grind Cam (dxf transfer in G code)-PC based control with graphical dialog programming or G-code programmingInfinitely variable speedSurface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycleSpindle with 6 angular contact ball bearings (P4, checkout 7)Air purge spindleLongitudinal guides with double V shape, with Turcite-B coatingTransv ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 122570 €: 2316.57 €: 600 mm: 500 mm: 600 mm: 325 mm: 600 mm: 205 kg: 450 mm: 500 - 2200 1/min: 5,5 kW: 19 kW: 2800 mm: 2800 mm: 2610 mm: 2850 x 2000 x 2470 mm: 3500 kg: 820 mm: Dm. 355 x 38 x Dm. 127 mm: 0,001 mm: 1.7 kW: 2.4 kW: 10 - 150 1/min: 0.005 mm: 0.003 mmiSurface control with 10,4", touchscreen for fully automatic grindingin machine manual wheel balancingtraveling column rib structureAC servo motors für Y/Z axes and rotary table1 pc. wheel flange1 pc. grinding wheel Dm. 355 x 38 x Dm. 127 mmCoolant equipment with automatic paper filter and magnetic separatorautomatic dresser on the table, with compensationfully enclosed splash guardelectromagnetic round chuck, fine pole pitch (1+3 mm)working lampwarning lampoperating manual in German and EnglishALTERNATIVE:model version FRG-600S with Smart iControl for profile grinding morepr ...

max. dia. of grinding wheel: 200 mm: 40 mmturning speeds: 1400/2800 U/minvoltage: 380 VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: mmgrinding length: mmcentre height: mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

band speed: 33 m/sgrinding band dimension: 75 x 2000 mmtotal power requirement: 3 kWweight of the machine ca.: 75 kgturning speeds: 2800 U/minStandard equipment:- Knife set for flat steel- Complete knife set for angle steel shears- Complete normal punching equipment- Quick release device for punches up to 31 mm- Support table for punching device, rectangular notching and flat steel shears- Bending stamp with matrices V 40 and V 70- Electric contact stop (1.000 mm)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 75.0 mmband length: 2000 mmband speed: 30.0 m/sekgrinding width: 500 Plantisch mmsuction capacity: 630 m³/htotal power requirement: 3.75 kWweight of the machine ca.: 90.0 kgrange L-W-H: 1100 x 550 x 1035 mm current new price incl. accessories approx. 2.500 euros incl. replacement sanding belts special price on requestEquipment :- High quality construction- Drive roller is crowned- This means that the sanding belt is automatically centered on the roller- Fully vulcanized contact roller for maximum service life and smooth running- Tool-free and therefore quick, uncomplicated change of the sanding belt- Stepless height adjustment- for optimum adjustment of the belt sander to the user- Freely adjustable metal fence- for optimum and safe guidance of workpieces when Use of the large surface sanding area- Belt speed optimized by design- to prevent the workpiece from burni ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 111670 €: 2110.56 €: 400 mm: 500 mm: 400 mm: 225 mm: 400 mm: 50 kg: 450 mm: 500 - 2200 1/min: 5,5 kW: 19 kW: 2800 mm: 2800 mm: 2610 mm: 2850 x 2000 x 2470 mm: 3450 kg: Dm. 355 x 38 x Dm. 127 mm: 0,001 mm: 1.7 kW: 2.4 kW: 10 - 150 1/min: 0.005 mm: 0.003 mmiSurface control with 10,4", touchscreen for fully automatic grindingin machine manual wheel balancingtraveling column rib structureAC servo motors für Y/Z axes and rotary table1 pc. wheel flange1 pc. grinding wheel Dm. 355 x 38 x Dm. 127 mmCoolant equipment with automatic paper filter and magnetic separatorautomatic dresser on the table, with compensationfully enclosed splash guardelectromagnetic round chuck, fine pole pitch (1+3 mm)working lampwarning lampoperating manual in German and EnglishALTERNATIVE:model version FRG-400S with Smart iControl for profile grinding price on requ ...

internal diameter: 150 mmgrinding depth: 200 mmstroke of the table: 425 mmbore: 80 mmspindle speed:: 17000 U / minworkpiece turning speeds: 125/176/246/350 U/minmax. swing dia.: 250 / 420 mmtotal power requirement: 2,2 / 0,5 / 0,9 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 2,40 x 1,20 x 1,45 mInternal grinding diameter: 150 mmMax. grinding depth: 200 mmTable travel: 425 mmBore diameter: 80 mmGrinding spindle speed: 17,000 rpmWorkpiece speeds: 125 / 176 / 246 / 350 rpmSwing diameter: 250 / 420 mmTotal power requirement: 2.2 / 0.5 / 0.9 kWMachine weight: approx. 2 tSpace requirement (L × W × H): approx. 2.40 × 1.20 × 1.45 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 5544 : prompt, Zwischenverkauf v : Polen : 1370 €: 1 : 75 mm: 2.000 x 75 mm: 200 x 75 x 42 ø mm: 605 mm: 3000 1/min: 3 kW: 1025 mm: 500 mm: 1000 mm: 76 kgIndustrial belt grinder with following features:- Separate emergency stop- Motor brake- Standard- Reliable- Simple and practical operation- Easy to adjust- Quick belt change without tools- 5-year guarantee on the motor- Optimal safetyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.