fresadoras usadas para venda (2,494)

x-travel: 700 mmy-travel: 500 mmz-travel: 500 mmControl: CNC 432 total power requirement: 10 kWweight of the machine ca.: 4 tdimensions of the machine ca.: 3 x 3 x 2,6 mNo. 0052Universal tool milling machine MAHO MH 700 CWorking area: 700 x 500 x 450Drive: 10 kWControl: Philips CNC-432Fixed tableFully protected cabin with 3 sliding doorsTool holder: ISO-40.Speeds: 20-3150 min-1Feed rate: 1-3000 mm/min,rapid traverse 6 m/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mmy-travel: 560 mmz-travel: 450 mmtotal power requirement: 4 kWweight of the machine ca.: 2,5 tdimensions of the machine ca.: 3 x 3 x 2,2 mNo. 0104Universal copy milling machineDECKEL KF 3 Sbuilt in 1979 with divided coordinate tableWorking area: 700 x 560 x 450 mmDrive power: 3 kWAccessories:Divided coordinate tableFinishing spindleLocking armControl handle with cableStylus holderColletsSpace requirement 3 m x 3mWeight approx. 2,380 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 25 mmx-travel: 500 mmy-travel: 260 mmcross-moving table: 880x320mm spindle turning speed - stepless: 100-9000 U/mincontrol: HEIDENHAIN TNC310 vertical movement: 480 mmquill stroke: 160 mmweight of the machine ca.: 2.2 tMisc accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 850 mmy-travel: 500 mmz-travel: 450 mmtable-size: 1250x500 mmspindle taper ISO: 50 spindle turning speed range: 35,5-1800 U/minweight of the machine ca.: 5.2 tHEIDENHAIN TNC-355Misc accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2.200 mmy-travel: 560 mmz-travel: 720 mmcontrol: iTNC 530 Heidenhainturning speed range - milling: 20 ~ 12.000 U/minpower capacity - milling spindle: 35 / 25 kWtool taper: SK 40 tool piece magazine with: 100 pos.table surface area: 2.600 x 600 mmrapid traverse X-axis: 100 m/minrapid traverse Y-axis: 50 m/minrapid traverse Z-axis: 50 m/minmax. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 300 mmmax. tool weight: 6 kgmax. table load: 2.200 kgtotal power requirement: kWweight of the machine ca.: 12 tdimensions of the machine ca.: 7,0 x 4,2 x 2,7 mChip conveyor: Coolantsystem: interface 4. axis: 4. axis: 560 mmSeperating wall: oil mist extraction: Tailstock: 350 mm / MK 5 elektr. hand wheel: through spindle coolant: 40 barTravelling column milling machineDECKEL MAHO - DMF 220 Linear- new spindle installed (April 2024)- incl. 4th Axis 560mm and  ...

x-travel: 1200 mmy-travel: 350 mmz-travel: 350 mmtable-size: 1800x405 mmspindle taper ISO: 50 spindle turning speed range: 30-1800 U/minweight of the machine ca.: 4.4 tMisc accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mmy-travel: 450 mmz-travel: 450 mmtotal power requirement: 4 kWweight of the machine ca.: 3,3 tdimensions of the machine ca.: 2 x 3 x 3 mNo. 1859Universal tool milling machine MAHO MH 800Working area: 700 x 450 x 450Universal built-in rotary table 1050 x 627 mm,quill feed gear 0.02-0.2 mm/revSpindle ISO-40,Speed range 32-1600 1/min,feeds 5-500 mm/min, rapid traverse 1.4 (0.7) m/min.Cross table movement by hand 225 mm,Table top rotation 360°Table swivels/tiltable +- 30° each.Space requirement approx. 2 x 3 x 3 m,Weight approx. 3.3 tons.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mmy-travel: 250 mmz-travel: 400 mmtool taper: ISO 40 spindle turning speed range: 30-6300 / 20-4200 U/minfeeds: 0 - 10.000 mm/minquill stroke: 90.0 mmtable-size: 600 x 320 mmT-slots: 5 x 14 x 63 mmControl: TNC 410 CA spindle: ein ~ 126 Std.engine output: 11.0 kWweight: 1300 kgdimensions of the machine ca.: 1600 x 1500 x 1900 mm Original price incl. special accessories ~ 72.000 euros Machine was very rarely used () with only approx. 126 spindle hours (spindle on)Furnishing :- MACMOM / INAS CNC universal milling and drilling machine- HEIDENHAIN CNC path control TNC 410 CA workshop-oriented path controls, with Programming in easy-to-understand plain text dialog HEIDENHAIN electr. Remote control with handwheel- Pivoting control panel, to the right of the machine- hydraulic tool clamping (tie bolt DIN69872-A)- Vertical milling head rotating on both sides - ISO 40- Vertical speed ...

x-travel: 720 mmy-travel: 220 mmz-travel: 450 mmtable surface area: 1000x310 mmweight of the machine ca.: 1.500 kgdimensions of the machine ca.: 2000x1200x1800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 710 mmy-travel: 600 mmz-travel: 455 mmControl: Dialog 11 total power requirement: 7,5 kWweight of the machine ca.: 5 tdimensions of the machine ca.: 4 x 3,5 x 2,5 mNo. 4430Universal tool milling machineWorking area: 710 x 600 x 455 mmDrive: 7.5Control: Dialog-11 controlSpindle holder SK 40Speed range up to 6,300Fixed tableCabinCoolant containerSpace requirement see data sheetWeight approx. 5 tonsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mmy-travel: 160 mmz-travel: 340 mmtotal power requirement: 2 kWweight of the machine ca.: 1 tdimensions of the machine ca.: 1,5 x 2 x 2 mNr. 3287Universal tool milling machine DECKEL FP 1Working area: 300 x 160 x 340Control: Active digital displayDrive: 1.5 kWSpeed range 2000 rpmTool holder SK-40Rigid angled table 210 x 600 mmDocumentationOptional / available on request:- Universal table- counter holder- Rotary table Ø 380mm- Dividing headThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mmy-travel: 160 mmz-travel: 340 mmtotal power requirement: 2 kWweight of the machine ca.: 1,2 tdimensions of the machine ca.: 1,5 x 2 x 2 mNo. 3934Universal tool milling machine DECKEL FP 1Working area: 300 x 160 x 340Control: Active digital displayDrive: 1.5Tool holder SK 40Speed range 2000 rpmRigid tableDocumentationOn request / optionally available:-Universal table / fixed table- Hydraulic machine vice- Tool cabinet- Rotary table Ø 380 mm-Cutting attachment-Collets and arborsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 315 mmy-travel: 180 mmz-travel: 320 mmtaper in main spindle: ISO 40 table surface area: 600 x 250 mmT-slots: 5 Stk.turning speeds: 45.0 - 1950 U/minfeed stepless: 10 - 170 mm/minvoltage: 400 Vtotal power requirement: 5.1 kWweight of the machine ca.: 1300 kgrange L-W-H: 1000 x 1400 x 1800 mm From a training workshop (vocational school) Well maintained ()Features:- Robust electric motor universal milling machine- HEIDENHAIN 3-axis digital display- Rotatable universal milling head (right/left = 90°)- Manual milling spindle feed, with lock- Stable T-slot clamping table- Axis feed with rapid traverse in Y-axis Rapid traverse continuously adjustable - Manual axis adjustment in Z+X axis- Control cabinet, installed on the left- Coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 350 mmz-travel: 380 mmtable-size: 790x360 mmspindle turning speed range: 63-4000 U/minspindle taper ISO: 40 quill stroke: 50 mmrange L-W-H: 1600x2000x1850 mmdigital readout: PHILIPS weight of the machine ca.: 1.4 tActive Digital read outMisc.accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mmy-travel: 220 mmz-travel: 400 mmControl: Dialog 2 total power requirement: 1,6 / 2 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2,5 x 2,5 x 2,2 mNo. 5290Universal tool milling machine DECKEL FP 2 NC / 2801Working area: 300 x 220 x 400Drive: 1.6/2 kWControl: Dialog 2 contouring controlFixed table with chip traySpindle SK 40Speed range up to 3150 min-1Quill stroke 65 + 60 mmSpace requirement c.3 x 3.5 mTransport dimensions approx. 2 loading metersWeight approx. 1300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mmy-travel: 135 mmz-travel: 300 mmspindle turning speed range: 100-2000 U/mintable-size: 590x210 mmweight of the machine ca.: 0.6 tDigital read-out 3 axeswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 480/500 mmy-travel: 230/250 mmz-travel: 380/400 mmspeeds: 45 - 2240 U/mintable surface area: 1000 x 250 mmtool taper: SK 40 control: HEIDENHAIN TNC 124 total power requirement: 3 kWweight of the machine ca.: 1550 kgdimensions of the machine ca.: 2600 x 2200 x 1800 mm- horizontal + vertical milling spindle- Cooling device- swiveling table- Chip tray- Feed X/Y/Z - axis infinitely adjustable 8-1680 mm/min- Rapid traverse X/Y/Z - axis 4000 mm/min- Control HEIDENHAIN TNC 124- Operating hours: 4764 hours- Machine light- Machine feet- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mmy-travel: 150 mmz-travel: 340 mmtable-size: 600x260 mmspindle taper ISO: 40 spindle turning speed range: 40-2000 U/minweight of the machine ca.: 700 kgVisit us on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 300 mmz-travel: 400 mmtotal power requirement: 3 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 222 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmtotal power requirement: 3 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 2 x 2 x 2 mNo. 2392Universal tool milling machineHERMLE UWF 801Working area: 500 x 430 x 400 mmDrive: 3 kWControl: TNC 135With manual control: Working area 520 x 450 x 410 mm,fixed table 800 x 400 mmTool holder SK 4018 spindle speeds from 40 - 2000 1/minFeed stepless x,y 4 - 1600 mm/minz 4 - 1000 mm/minDimensions 2.3 x 2.3 x 1.7 mWeight 1350 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine number: F39455Operating voltage: 400 VControl voltage: 230 VFrequency: 50 HzRated current: 100 AConnection: 50 kVAControl: SIEMENS SINUMERIK 840 CTravel X-axis: 5000 mmTravel Y-axis: 1200 mmTravel Z-axis: 1000 mmRapid traverse: 0 - 10 m/minFeed: 0 - 4 m/minSpeed: from 20 to 2800 rpmMilling head position vertical/horizontal/middle/horizontal right/horizontal left/horizontal topUniversal milling head particularly suitable for milling with 5-fold spindle positioning DrillingTable dimensions: 3750 x 1250 mmwith 9 groovesTool holder: SK 50Rotary table dimensions: 1250 x 1250 mmwith 9 grooves and an attached RÖHM three-jaw chuck, diameter: 500 mmincl. large batch of clamping devices and a large batch of SK 50 tool holders, corresponding carriersincl. 60-fold tool changerincl. the tool holders in the tool changer shown in the photosincl. chip conveyor and coolant systemAttention: the m ...

x-travel: 800 mmy-travel: 300 mmz-travel: 400 mmtotal power requirement: 3 kWweight of the machine ca.: 2,5 tdimensions of the machine ca.: 2,52,52 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mmy-travel: 160 mmz-travel: 290 mmtable surface area: 210 x 600 mmtool taper: SK 40 spindle turning speed range: (16) 40 - 2000 U/minfeeds -stepless-: 5 - 500 mm/minrapid traverse: 1,2 m/minspindle motor: 1,5 / 1,9 kWtotal power requirement: 9,5 kVAweight of the machine ca.: 730 kgdimensions of the machine ca.: 2000 x 2200 x 1655 mmThe machine comes from a training center.Equipment:3-axis active digital readout made by HeidenhainFixed angle tableCoolant equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 350 mmz-travel: 375 mmdigital readout: AKTIV - Digitalanzeige turning speed range: 63 - 4000 U/minspindle taper ISO: 40 table surface area: 800 360 mmtotal power requirement: 3 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2 2 2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-axis: 4000 mmy-axis: 3200 mmz-axis: 1200 mmdistance between columns: 2700 mmspindle motor: 50 / 65 kWspindle turning speed range: 15000 U/mindistance spindle nose and table: 200 - 1400 mmrapid traverse: m/mintable-size: 4020 x 2400 mmworkpiece weight: 15 tControl: Heidenhain TNC 640 total power requirement: - kWweight of the machine ca.: 44 tdimensions of the machine ca.: - mMachine equipped with:X, Y, Z, B, C five axes simultaneous movement control- CNC control Heidenhain TNC 640- 40-position tool changer (HSK-A100)- 2-axis milling head TCH-19F-- B- & C-Axis- X,Y,Z-axis linear scales- IKZ 20bar- Tool off-set- Oil skimmer- Chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: - mmx-travel: 1250 mmy-travel: 630 mmControl: Heidenhain TNC 426 / 430 total power requirement: 48 kWweight of the machine ca.: 12 tdimensions of the machine ca.: ca. 5 x 6 x 4 m mCNC jig boring machine / vertical machining centreoverhauled in 2000Spindle ISO 50,speed range 30-3000 min-1max. torque 522 Nmfeeds 3-2000 mm, rapid traverse 10 m/minmax. distance spindle nose - table surface 725 mmProjection spindle centre - stand 800 mm.Space requirement approx. 5 x 5 m,Weight approx. 12 tonnesThe machine was completely overhauled and modernised in 2000 with digital drives anddrives and Heidenhain controlFixed table 1200 x 71036-fold tool changer,coolant system,the pictured magnetic clamping table is not included in the scope of delivery ! -Working area: 1250 x 630 x 560Drive: 44 kWControl: Heidenhain TNC 426 PBThe data for this ad was created with ModulMWS - the software so ...

x-travel: 800 mmy-travel: 450 mmz-travel: 500 mmControl: CNC 332 / TNC 355 total power requirement: 5,5 kWweight of the machine ca.: 4 tdimensions of the machine ca.: ca. 3 x 3 x 2,5 mNo. 2213Universal tool milling machine MAHO MH 800 TWorking area: 800 x 450 x 500(800 longitudinal / 450 vertical / 500 transverse)Drive: 5.5 kWControl: Heidenhain CNC 332 / TNC 355Universal built-in rotary tableCoolant deviceChip traySplash guard half cabin, tool clampTechnical documentationTool holder ISO 40,Table clamping surface 600 x 900 m, max. table load 500 kg,quill stroke 80 mmSpeed range 63 - 3150 rpmFeed rate 1 - 1500 mm/minRapid traverse: 4.5 m/minWeight: approx. 4 tonsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 6000 mmy-travel: 3000 mmz-travel: 1000 mmControl: HEIDENHAIN TNC 640 table surface area: 6000 x 3000 mmtable weight: 8000 Kg/m²rapid traverse X-axis: 60000 mm/minrapid motion - y-axis: 60000 mm/minnumber of spindle speeds: 15000 U/min/rpmSpindle power: 35 / 42 kWtaper ISO: HSK A 100 distance between columns: 3000 mmdistance spindle nose and table: 280 - 1280 mmA-Axis: +125 / -125 °c-axis: 360 °total power requirement: - kWweight of the machine ca.: 65 tdimensions of the machine ca.: - mm- CNC control Heidenhain TNC 640- Universal milling head 2-axis- 5-axis automatic Compensation system- Automatic tool changer 40-fold (HSK 100)- Internal spindle cooling- Blum tool measuring system- Blum workpiece measuring system- Heidenhain linear scales- Portable handwheel- Chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 275 mmmax. module: 6 min. module: 1,5 Control: SINUMERIK 840 C tooth width: 5,5 mmspiral angle: min. 0 / max. 60 °max. number of teeth: 120 min. number of teeth: 5 ratio of transmission: 1:10 min. ratio of transmission: 1:1 work piece spindle speed: max. 110 U/minblade head turning speeds: 20 - 110 U/mintotal power requirement: 100 kWweight of the machine ca.: 16,7 tdimensions of the machine ca.: 5,20 x 2,30 x 2,40 mInternal deburring device U axis / Q spindlechip conveyorcoolant deviceElectrostatic air purifier ELBARONno toolsNo workpiece clamping device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2023 : 4546 : prompt, Zwischenverkauf v : Taiwan : 32800 €: 1 : 65 - 2600 U/min: ISO 40 : 420 x 220 x 380 mm: 840 x 390 mm: 2.2 kW: 1600 mm: 1700 mm: 2000 mm: 1145 kg: 840 x 390 mm: 1000 mm/min: 5 : 14 x 63 mm: 200 kg: 420 mm: 220 mm: 380 mm: 0 - 600 mm/min.: 0 - 600 mm/min.: 65 - 2600 : 90 - 310 mm: 65 - 2600 : +/- 90° °: 100 mm: manuell : 2,2 kW: 950 x 250 mm: 90 - 310 mm: 100 - 480 mmdemo machine / mint conditionnet price (price for new machine € 41.800,00)swiveling operating panel3 axes digital read out Fagor 40i Innovamotor for horizontal- and vertical spindle: 2,2 kWfeed motors with inverter for X/Y/Z: 0,35 / 0,35 / 0,75 kWball screw spindles for X/Y/Z axesmanual gear box for spindle speeds1 pc. long milling arbor 27 mm3 pcs. recustion sleeves (MK1, MK2, MK3)1 pc. drawing bar ISO40 for horizontal or vertical spindlespindle protection with switchtable safety guar ...