máquinas de produção da janela usadas para venda (159)

SCM Tenomac Spigot & Máquina de caça-níqueis Motor 7.5 KW 380V Eixo 50 mm Comprimento 320 mm Diâmetro maxi da ferramenta: 350 mm Mini: 250 mm Curso 265 mm Velocidade: 3250 rpm Alimentação da mesa de ranhuras: 3 e 12 m. Unidade de serra de corte cruzado: 2800 rpm. Diâmetro da lâmina de serra 400 mm Motor 3 KW 220 V Bom estado - pronto para enviar

Transportadores íngremes SCM para o transporte dos grânulos de vidro após a saída do sistema de janelas SCM. O transportador de pedra tem 2,60 m de altura com uma correia transportadora de 6 m para transportar uma serra de vidro de esquadria O tamanho é: 2,20 de largura x 2,60 de altura com 1,20 pés feitos em aço inoxidável. Motor 7.5KW devido ao arranque A correia transportadora tem 6,50 m de comprimento x 100 mm de largura no canal.

OKOMA UF 2 S-1 máquina de desconto automática com: 2 eixos direito e 1 eixo esquerdo - Eixo 1 - Igual e contra-rotação 320 mm - Eixo 2 - contra-rotação 320 mm - Eixo 3 -Gegenlaut 320 mm Paragem automática à esquerda com programação

Length: 2700 mmWidth: 1100 mmHeight: 850 +- 150 mmengine output: 0,37 kWElectric capacity: 0,5 kwcompressed air: 6 barHorizontal impregnation system Pro flow for individual parts with rinsing circuit.---------------------------------Features:Machine for horizontal flooding of individual parts. The product will go throughflooded a row of nozzles. The excess product is then removed through air jetsblown off.The pump and the air nozzles are controlled automatically and only thenoperated when the workpiece passes through. In this way theCompressed air consumption reduced. The circulation operation ensures minimalproduct consumption.---------------------------------Construction features:structureSturdy steel frame, painted with high-strength, water-soluble products.Machine body made of heat-sealed, thick polypropylene plates.4 independent chambers for inlet, flooding, blow-off and outlet.Hori ...

Number of boring spindles: 3 St.Number of tools: 1.3/4.1. St.Spindle diameter: 50,40 mmSpindle length: 120,320,125 mmweight: 2500 kgloading dimensions L x W x H: 3800x1400x2000 mmtable length: 3470 mmWeinig Univar 6 Pto be sold on behalf of our customer----------------------Operating voltage: 380 volts, 50 periods.For milling around windows, doors and similar with uneven edgesProfiles.Arrangement of the aggregates:1. Synchronous spindle on the right, pneumatically clocked.2. Profiling spindle on the right3. Fitting spindleProfiling spindle suitable for holding several tools one on top of the other.Spindle movement pneumatic.The 1 spindle works in synchronization for tear-free milling. RespectivelyThis spindle plunges the last 100 mm of a frame end with theInsert the appropriate tool into the wood to prevent tearing at the frame cornersavoid.Machine stands, tables, stops:Machine body made ...

Manual hand unit: Nein J/NAutomatic for single pieces: Ja J/NAutomatic for frames: Nein J/NClip set 351 on the loose item------------------------------------Manufacturer description:- Base frame in stable welded construction- Clip container as tipping conveyor with separation and feeding the clips- Screwdriver with tipping conveyor for the screws to be separated, feed screwdriver pneumatic with depth adjustment- Conveyor belt length approx. 4,000 mm as NC axis- Contact and clamping cylinder- Electro-pneumatic control via PLC It can programs with different Initial and distance dimensions can be entered- Workflow automatically in flow--------------------------------------Technical specifications:- Screw height 50-120 mm- Profile length 350-3,500 mm- Table height approx. 950 mm--------------------------------------Total price of the machine ex works: on request!Freight costs within Ger ...

Bore diameter: variabel mmNumber of heads horizontal: 1 St.Number of heads vertical: 0 St.1 Götzinger dowel gluing and insertion machine BLEWith the BLE, the workpieces are glued and dowelled on the front. Optionalthe BLE can be upgraded with a drilling unit, counter milling unit and longitudinal stopwill. A 10 touch panel allows easy operation for manualor online operation.Base frame: in a compact design, covered with sheet metalTable support approx. 800 x 200 mmposition 1----------------------1 glue stationfull jet valveGlue quantity precisely adjustableGlue gun for counter hole gluingposition 2----------------------1 stainless steel glue pump, high-pressure pump and glue hoseitem 3----------------------1 press-in station with dowel separation and press-in cylinderitem 4----------------------1 oscillating conveyor for dowels d 8 x 50 mm with feed hoseinto the injection unititem 5----- ...

Corte transversal viu diam. 300 milímetros Diâmetro do fuso de fresagem. 40 milímetros Mesa deslizante com paragem de comprimento Festo Serra de bico de sucção 120 mm Dto. Fresadora 140 mm Cabo + ficha 16 Amp, sem cama. Oficina revisada

Motor de serra de corte cruzado 1,8 kW Motor de fresagem acima de 1,8 kW Fundo do motor de moagem 1,8 kW Mesa deslizante com braçadeira de mão Superfix Lâmina de serra 2 discos ranhurados

Manual hand unit: Ja J/NAutomatic for single pieces: J/NAutomatic for frames: Ja J/NThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L,W): 2000,3000,4000 mmWeight: 100 kgtiltable yes/no: nein neinAssembly glazing and sealing stand with lifting device RU -S1Stop - and assembly table standing, length 2000 mm, width 700 mmPlant height 1600 mm, lifting device with pneumatic 300-1000 mm,Space than roller conveyor , roll length 200 mm, roller pitch 200mm.Roller conveyor height adjustable 280-350 mm. Contact surface withFelt strips and a height-adjustable rubber roller bar at the bottom toTop . Conditioning grille to protect the edges , left and right respectively oneRole as edge protection for elements up to 2500 mm height.Aufstellrollenbahn with steel rollers , roll length 200 mm, roller spacing 200 mm,2 shelf boards, load capacity 300 kg.alternatively :-------------RU -S2Stop and assembly table standing . Same as RU -S1However, length 3000 mmalternatively :------------RU- S3Stop and assembly table standing des ...

: - Working width: - mm: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L,W): - Weight: - tiltable yes/no: - In addition to standing a PDF document, see the description of positions -Prices on request!RUCHSER standard offer with layout fora wooden window production with being milledGlass bar and screwed corner joints.Daily capacity approximately 15 WindowManufacturing consisting of:Item 1.0 - Item 107 850 000RU-PWD-H1600/130/4 profile carriage double-sided Length 1600 mm, width 850 mm, height 2140 mmfor horizontal position round and transport ofProfile sections.12 support arms each column welded tothe column, 2 adjustable center column,clear spacing of the support arms 130 mm,Depth of the support arms on each side 400 mm,Support arms covered with felt, with 4 plasticswivel castors, diameter 150 mm, of which2 with stop means.Item 2.0 - Item 0150001RU-M rotation - tilting tablemanually tiltable bearing surface 1300 x 1400 mm,with 4 plug extension 1 ...

Manual hand unit: J/NAutomatic for single pieces: Ja J/NAutomatic for frames: Ja J/NThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L,W): - Weight: - tiltable yes/no: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Máquina de rebating automática / máquina de corte transversal automática 2 eixos

0: ja Working width: 3000 (3500) mm0: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of spindles: 3 St.Number of tools: 2/3 St.Spindle diameter: 40/50 mm1 OKOMA folding machine model UF 2 EG-------------------------------------1. Energy data:- Operating voltage: 3 phases, 380 V, 50 Hz.- Compressed air: Air requirement: 13 NL/min. Operating pressure: 8 bar up. Air: according to Pneurop 66112. Profile spindle 1:- Spindle arrangement: right- Power 11 kW- Speed 7000 rpm- Direction of rotation: synchronous and counter rotation- Spindle diameter 40 mm- Usable length 252 mm- Tool diameter max. 230 mm- U-movement of the profile spindle- Positioning vertically Drive: pneumatic cylinder 120 mm cycle for 2 tool positions Position sensor: limit switch- Positioning horizontally Drive: Pneumatic cylinder forward-back Position sensor: limit switch- Automatic immersion: immersion speed can be regulated for tear-free Fold over- ...

Dimensions (L,W): , mmWeight: ca. 90 kgadjustable height (yes/no): ja stroke: 300 - 800 mmsurface of working table: 1.700 x 1.500 mmtable width: max. 3.800 mm0: ca. 130 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diâmetro máximo da ferramenta: , mm 0: , mmPressão de funcionamento: , Quantidade de enchimento da barra: 52 L Quicksonic QS 520------------------Dispositivo de limpeza ultra-sônico com tampa e cesto de trabalho Dimensões utilizáveis: L 500 x W 400 x H 260 Dimensões do cestoutilizável: L444 x W 364 x H 224Conteúdo: aprox. 52 l

Working width: 4000 mmWorking height: 2600 mmNumber of cylinders: 6 St.Dimensions (L/W/H): 5300 x 1250 x 3330 mmS&S frame press type RP 2000,-----------------------------C E - versionStable frame welded construction made of thick-walled special hollow profiles,Sliding carriage and pressure bar with 50 mm hole pattern.Continuous abutment on the left for width compression, lower abutmentin two levels.Vertical press cylinder on special pressure bar with one-hand quick adjustmentwith weight compensation in the 50 mm hole pattern, height-adjustable, longSliding carriages ensure thepermanent absorption of high pressing forces.Fast, smooth width adjustment with ball-bearing carriageCentral locking, fixation in 50 mm hole pattern.Upper horizontal press cylinder infinitely adjustable in height and withEquipped with counterbalance.Lower horizontal press cylinder with center holes for the twoAbutme ...

Number of motors: 2 Stück0: 2380 mmControl: , 0RUCHSER RU-GL-45°-----------------------------------------------------Glazing bead saw at the sliding work tableDeveloped for cutting glazing beads in pairs on the sliding work tableThe RU-GL glazing bead saw is mounted on a sliding work table withScanning and clamping device fortwo glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw stuckright saw on carriagemounted to be moved manually. Pneumatic clamping device from above and fromthe side, safety two-hand operation. Saw motors 0.37 kW, voltage 400V.Sliding work table with felt pad, length with side shelf 3300 mm,Width 1400 mm, working height 800 - 1000 mm. Pneumatically lowerableCounter bearing for positioning the wings.Pos. 1: RU-GL double glass bead saw 45° on the RU-SA-3000-----------------------------------------------------for glazing beads up to 30 x 70 mm (W x H) ! ...

Number of motors: 2 Stück0: 2650 mmControl: , 0Ruchser RU-GLS-ED 45° glass bead saw--------------------------------------Developed for cutting glazing beads in pairsThe RU-GLS-ED45° double glazing bead saw must be adjusted to size manually. theMachine was designed for cutting glazing beads in pairs with acutting angle of 45° and features a fixed and amovable saw unit. The manual length adjustment is equipped withan electrical digital display. It can cut lengths from 240mm - 2650mmbe sawn. During the cutting process, the glazing beads with apneumatic clamping device clamped from above and from the front to prevent tiltingto prevent the glazing beads. Operation is via a safetytwo-hand operationItem 1: RU-GLS-ED45° double glazing bead saw-----------------------------------------------------with manual measurement, for the pairwiseCutting glazing beads, cutting angle 45°.Manual length  ...

Bore diameter: variabel mmNumber of heads horizontal: 3 St.Number of heads vertical: 4 St.Dimensions (L/W/H): 6100x1500x2300 mmWeight: 950 kg1 NEW drilling and milling center Götzinger Power Drill 300With the Götzinger PowerDrill you can, depending on the type and design:- Drill on the front and on the long side- Dowels of front doors, pegs, fighters- The drilling patterns are freely programmable- You can drill: handle slides and corner bearings, with quick-change multiple spindle- You can: Milling lock case, pusher and PZ as well as 3D belts and drill- The machine has a horizontal and a vertical milling unit- A simple control lets you create drilling and milling programs, save and call againBase frame in sturdy design, covered with sheet metalTable top 1800 x 200 mmProcessing unit:X-axis - 500 mm working travelY-axis - 0-120 mmZ-axis - 0-105 mm (above table)Horizontal aggregates:1  ...

0: 2750 mmWorking height: 2500 mm0: 300-1000 mmRUCHSER glazing and sealing table RU-SW3-90° year of manufacture 2022-----------------------------------------------------Vertical work table with lifting device and turning device. EspeciallySuitable for glazing and sealing wooden windows on both sides.Furnishing:System part covered with feltInfinitely variable pneumatic lifting device,Stroke of 300 mm - 1000 mm, based on roller conveyor heightTurning device for sealing on both sides, with roller conveyor 150 mmroll length2 pneumatic tensioners for clamping the window to the turning deviceVersion with special turning device for pushing through the on theRoller conveyor set up window with applied (closed)turning deviceEquipment demonstration machine, alternative/optional equipment on request!Pos. 1.0: Item no.: 1000000RU-SW3-90° vertical work table forWooden window with turning device forG ...

max. tool diameter: 400 mm: 180 mmoperating pressure: 2 barROTATHERM chamber washing systems are used in all areas of industry andCraftsmanship for cost-effective cleaning of a wide variety of items to be cleaned and materials used.The parts are cleaned like in a dishwasher. Inserted into oneWire mesh basket they are in the closed device with a hotLye shower washed from all sides. The machine will be selected after theTemperature and washing time set in operation. A centrifugal pump promotes theWashing water circulates to the nozzle system, which at the same time moves the basket in offset rotation. (Optional electric basket drive)After the cleaning process is complete, the device switches off automatically. the Parts can also be removed beforehand. In this case, when lifting thethe pump is automatically put out of operation.ROTATHERM chamber washing systems are available in various size ...

max. tool diameter: 400 mm: 310 mmoperating pressure: 2 barROTATHERM chamber washing systems are used in all areas of industry andCraftsmanship for cost-effective cleaning of a wide variety of items to be cleaned and materials used.The parts are cleaned like in a dishwasher. Inserted into oneWire mesh basket they are in the closed device with a hotLye shower washed from all sides. The machine will be selected after theTemperature and washing time set in operation. A centrifugal pump promotes theWashing water circulates to the nozzle system, which at the same time moves the basket in offset rotation. (Optional electric basket drive)After the cleaning process is complete, the device switches off automatically. the Parts can also be removed beforehand. In this case, when lifting thethe pump is automatically put out of operation.ROTATHERM chamber washing systems are available in various size ...

0: 3.700mm, 5.100mm, 6.100mm mmWorking height: 160 mm0: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Length: 5000 mmWidth: 750 mmHeight: 3500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bore diameter: , mmNumber of heads horizontal: , St.Number of heads vertical: , St.SPINAMATIC mod. GLF-HP Dübeleintreibgerät mit Leimangabe für Fensterfertigung------------------------------------------------------ ----------komplett wie folgt :- Fahrbare Ausführung- Dübelzuführung zur Pistole wird durch SPS-Steuerung gesteuert.- 1 Wendelförderer zur Aufnahme von Dübeln mit 1 Zuführung- Leimanlage ist mit Hoch-Druckpumpe 10:1 und Sonderleimspritzdüse für Dickleim (Typ D3 oder D4-Einkomponent) augerüstet- pneumatische Pistole für Dickleim- und Dübeleinsetzen mit Ausrüstungen fürnur einen Dübeldurchmesser nach Wahl zwischen : 6 - 8 – 10 oder 12 mm.Dübellänge : min. 25 mm. – max. 60 mm.Tiefeinsetzen = 30 mm.Der Leim wird durch eine Sonderleimspritzdüse, die mit SPS-Steuerung fürelektronische Dosierung in Verbindung ist, gespritzt .- Flexibler Arm mit Gegengewicht zu ...