máquinas injetoras usadas para venda (819)

This Battenfeld TM 1600/1000 was manufactured in 2001. A robust injection moulding machine with 160 tonnes of clamping force and a screw diameter of 50 mm. It features a distance between tie bars of 520x520 mm and an opening stroke of 480 mm from the installation height. Ideal for precise and efficient production, the Battenfeld TM 1600/1000 machine we have for sale is a valuable asset for any operation. Contact us for further details.

This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection moulding machine. Contact us for more information.

This MAPLAN MFT 750/160 edition S was manufactured in 2016. It is a vertical injection moulding machine, ideal for precision plastic processing. Contact us for more information.

This Netstal Elion 800-270 was manufactured in 2021. It features a robust AXOS control system and a high-speed injection unit capable of 450 mm/s. The machine includes a screw diameter of 40 mm and a fully integrated 9 kW hydraulic unit. It supports a tool installation height range of 200–500 mm and is equipped with a Euromap 67 robot interface. If you are looking to get high-quality injection molding capabilities, consider the Netstal Elion 800-270 machine we have for sale. Contact us for more information.

This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct-drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Includes a granule dryer, industrial robot, conveyor belt, and temperature units. Ideal for high-quality injection moulding processes. Contact us for more information about this machine.

This SUMITOMO SHI DEMAG El-Exis SP 350/820-920 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 40 mm and a clamping force of 3,500 kN. It has operated for 17,716 hours with 12,440,761 cycles, ensuring extensive production capabilities. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 350/820-920 electrical injection moulding machine. Contact us for more information.

This hydraulic injection moulding machine was manufactured in 1997. It features a clamping force of 1500 kN and a screw diameter of 55 mm, suitable for precise injection moulding processes. The machine dimensions are 4.97 x 1.48 x 2.16 m, and it weighs 8 tonnes. If you are looking to get high quality moulding capabilities consider the Krauss Maffei KM 150-1000 C1 machine we have for sale. Contact us for more information about this machine.

This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 1600 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine.

This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for sale.Contact us for more information.

This DEMAG Systec 210/580-840 was manufactured in 2019. Its a hydraulic injection moulding machine with a clamping force of 210 tons and a power output of 60 kW. It has been used for 31,132 operating hours. Consider the opportunity to buy this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Contact us for more information.

Máquina de moldagem por injeção Krauss Maffei KM 800-5700 BJ 1999 Dados técnicos a pedido

Máquina de moldagem por injeção Battenfeld Tipo de máquina TM 2700/2800 Tipo de Controlo B2 Ano de construção: 2003/04 Diâmetro do parafuso 75 mm

An Arburg injection molding machine with a rotary unit on the moving mold half is available. Column spacing: 420mm, clamping force: 1000kN, opening force: 250kN, opening stroke: 500mm, min. mold installation height: 250mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Injection unit 350, screw diameter: 35mm/40mm/45mm, max. shot volume: 230cm³, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2750mm, weight: approx. 4500kg, operating hours: approx. 75443h. Documentation available. On-site inspection is possible.

A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen spacing: 750mm, tie bar spacing X/Y: 420mm/420mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1700mm/2100mm, weight: approx. 3500kg. Documentation available. On site inspection is possible.

A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 1300kN, Opening stroke: 500mm, min. installation height: 250mm, Platen distance: 750mm, Tie bar spacing X/Y: 420mm/420mm, Platen dimensions X/Y: 605mm/605mm, max. mold weight: 650kg, Ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1650mm/2100mm, Weight: approx. 4300kg, Operating hours: approx. 80131h. The machine is defective and no longer functional or operational. Can only be used as a spare parts carrier. Documentation available. An on-site inspection is possible.

A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen distance: 750mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2100mm, weight: approx. 3500kg, operating hours: 44117h. Documentation available. On-site inspection is possible.

A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 9171h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible.

A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 13361h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible.

Máquina de Moldagem por Injeção FCS SD 6000 BJ 2016

Key data: 2500 kN, 476 g/PS, 55 mm

1.0 St. Gebr. Máquina de Moldagem por Injeção Fabricante: KRAUSS MAFFEI Tipo: KM250-1000CX Ano de Fabricação: 2017 Força de fixação: 250 toneladas Espaçamento das longarinas 630 x 630 mm Parafusos DN: 55 mm Deslocamento máximo: 523 cm³ Peso da peça moldada: 476 g/hp Controlo: MC6 Equipamento: Comboio de núcleo de 2 PCS Robô de Interface Controlo de canal de zona quente a 12 vias Unidade de controlo de temperatura de interface

Key data: 4200 kN, 2 g/PS, 80 mm

1.0 St. Gebr. Máquina de Moldagem por Injeção Fabricante: KRAUSS MAFFEI Tipo: KM420-4300CX Ano de Fabricação: 2012 Força de fixação: 420 toneladas Espaçamento das longarinas 800 x 800 mm Parafusos DN: 80 mm Deslocamento máximo: 1.810 cm³ Peso da peça moldada: 1.647 g/hp Controlo: MC6 Equipamento: Comboio de núcleo de 2 PCS Robô de Interface Controlo de canal de zona quente a 12 vias Unidade de controlo de temperatura de interface

Key data: 600 kN, 94 g/PS, 30 mm

1.0 St. Gebr. Máquina de Moldagem por Injeção com Robô Fabricante: DEMAG Tipo: Conceito ET60-200 Ano de Fabricação: 2003 Força de fixação: 60 toneladas Espaçamento dos longarinos 420 x 420 mm DN dos parafusos: 30 mm Deslocamento máximo: 106 cm³ Peso da peça moldada: 94 g/hp Controlo: NC5 Equipamento: Fabricante do robô: WITTMANN, tipo: W621-1381 Comboio de núcleo de 2 PCS

Key data: 2500 kN, 579 g/PS, 60 mm

1.0 St. Gebr. Máquina de Moldagem por Injeção com Robô Fabricante: DEMAG Tipo: Conceito ET250-840 Ano de Fabricação: 2004 Força de fixação: 250 toneladas Espaçamento das longarinas 630 x 630 mm Parafusos DN: 60 mm Deslocamento máximo: 636 cm³ Peso da peça moldada: 579 g/hp Controlo: NC5 Equipamento: Fabricante do robô: WITTMANN, tipo: W633-931 Comboio de núcleo de 2 PCS

3 máquinas de moldagem por injeção Stork 440 a 1 x Máquina de moldagem por injeção Stork 660 a 2 x Máquina de moldagem por injeção Stork 900 a

Two injection molding machines are offered, year of manufacture 2008 and 2009. Clamping force: 500kN, tie bar spacing X/Y: 320mm/320mm, mold mounting plates X/Y: 446mm/446mm, opening stroke: 350mm, max. platen distance: 550mm, injection unit 170: screw diameter: 25mm-30mm, shot volume: approx. 59ccm/25mm screw, approx. 85ccm/30mm screw, shot weight: approx. 62g to 77g, injection pressure: up to 2500bar. Inspection is possible by arrangement.

Key data: 1100 kN, 25 mm

N.º de ação: 503665 Fabricante: Wittmann Battenfeld Tipo: EcoPower 110-350 Controlo: UNILOG B6P Ano de Fabricação: 2014 Horas: 56851 h Força de fixação: 1100 kN Dimensões de madeira h x v: 470 x 420 mm Tamanho da placa h x v: 680 x 663 mm Altura mínima de instalação: 200 mm Altura máxima de instalação: 450 mm Espaçamento máximo das placas: 830 mm Curso de abertura: 380 mm Diâmetro do parafuso: 25 mm Cilindrada: 86 cc Pressão de pulverização: 3000 bar Equipamento Texto do ecrã: alemão Texto Multi-Língua no Ecrã Soquete CEE 16A Máquina com bateria de água Elementos de nivelamento Dimensões da máquina LxWxH: 4,57m x 1,5m x 2,13m Peso total: 4800KG

Ref. no.: 17507Manufacturer: DEMAGYear of construction: 1998Clamping unitClamping force: 80 tonOpening stroke: 450 mmDistance between tie bars: 370 x 370 mmMould height min.: 200 mmPlaten size (h x v): 600 x 600 mmInjection unitScrew diameter: 35 mmInjection volume: 168 cm³Shot weight: 149 gInjection pressure: 2020 barMeasurements and weightDimensions: 4,1 x 1,4 x 2,0 mMachine weight: 3700 kg

Offered is a Boy 100E 2K injection molding machine (year 2020, approx. 15160h) including Boy 2C XS unit, Boy LR5 handling (year 2020) as well as Dorner GAL-60 conveyor. 1000kN clamping force, 2-fold core pull, 2-fold air blast, 24mm screw (main unit) + 22mm screw (2K), fully enclosed, hydraulic ejector 42.7kN, OPC-UA & network interfaces, EUROMAP-67 robot interface, robot stroke X/Y/Z: 300mm/800mm/1500mm, conveyor 400mm width, 2m length. Viewing is possible upon arrangement.

Offered is a Boy 80E 2K injection molding machine (year 2016, approx. 29398 operating hours) including 2C XS aggregate, Wittmann Primus 16 handling (year 2022), Dorner GAL-60 conveyor. 800kN clamping force, 2-fold core pull, 2-fold air blast, 24mm screw, completely enclosed, hydraulic ejector 42.7kN, EUROMAP 67 interface, robot stroke X/Y/Z: 2000mm/1200mm/620mm, conveyor 400mm width, 2m length. Viewing is possible by arrangement.

DADOS TÉCNICOS DA MÁQUINA Geral Força de fixação: 50 t Ano de fabrico: 2006 Controlo: NC4 Peso: 2.700 kg Dimensões (L × W × H): 3,8 × 1,1 × 2,1 m Unidade de injeção – .../200 Diâmetro do parafuso: 22 mm Volume de injeção: 41,8 cc Pressão específica de injeção: 2.800 bar Sistema de fecho – 50/... Força de fixação: 50 t Dimensões da placa da ferramenta: 520 × 520 mm Folga entre colunas: 355 × 355 mm Altura da ferramenta: 210 mm Distância de abertura: 400mm Distância máxima da placa: 610mm