We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Tipo de máquina
Fabricante
- Bomba (7)
- Bomba de vácuo (54)
- Bomba de vácuo de garra seca (6)
- Bomba de vácuo de vane rotativa (16)
- Bomba
de pressão e vácuo (10) - Cabine de pintura (11)
- Compressor (8)
- Câmara de teste de temperatura (7)
- Equipamento de Laboratório (10)
- Forno (5)
- Granulador (5)
- Gravador de gravura granito+vidro (6)
- Máquina de lavar pressão (76)
- Reboques pesados (20)
- Separador (11)
- Servo motor 3000 rpm (10)
- Sistema de refrigeração (5)
- Sob jack (5)
- Tanque de armazenamento/ tanque de vinho/ tanque de sumo de fruta (9)
- Tanque de aço inoxidável (5)
- Tanque de água de extinção (8)
- Transmissão (5)
- Ventilador (9)
- 3D SYSTEMS (1)
- ABB (29)
- ABEL (1)
- ABI TRAILERS (1)
- ABS INAUEN (1)
- ABS Trading (2)
- Abus (8)
- ACHENBACH (1)
- ACTIVATEC (1)
- ADL (2)
- ADLER BUZZI (1)
- AEG (12)
- AEL GMBH LEISNIG (1)
- AEROTECNICA (1)
- AERZEN (1)
- Aerzener (3)
- AFA (3)
- AFA TECHNOLOGIES (1)
- Afriso (5)
- AFS (1)
- AGILENT (1)
- AGILENT TECHNOLOGIES (1)
- AGRAMKOW (1)
- AHRENS + BODE (1)
- AICHELIN (1)
- AIMS MOTION TECHNOLOGY (1)
- AIRCRAFT (2)
- AIRPOWER EUROPE (1)
- Airtec (4)
- AL-KO (2)
- AL-Ko Therm (2)
- ALBIAN (1)
- ALBIS (1)
- Alcatel Adixen (2)
- ALDURO (4)
- ALEXANDERWERK (1)
- Alfa Laval (14)
- ALFA LAVAL, WESTFALIA (1)
- ALFA-BILICI (1)
- ALFAMACCHINE (1)
- ALKO (3)
- Allgaier (4)
- ALLROUND (1)
- ALLWEILER (2)
- ALMIG (1)
- ALPHA (4)
- Alpha Technologies (3)
- ALPHASTAUB (1)
- Alpine (3)
- ALPMA (1)
- Alsthom (2)
- ALTENBERG ? (1)
- ALUP (2)
- ALUP KOMPRESSOREN... (1)
- AMACKER + SCHMID (1)
- AMAFILTER (1)
- Amandus KAHL (3)
- AMETEK (1)
- AMOB (1)
- AMSLER (1)
- AMSY (1)
- AMUT (1)
- ANALYTIK JENA (1)
- Ankom (2)
- ANLAGEN UND MACHINEN TECHNIK GMBH (1)
- Anritsu (2)
- Anton Paar (2)
- APS (1)
- APV / ZAMET / AMOS (1)
- AQUILA TECHNIC (1)
- ARBURG (85)
- AREVA (1)
- ARGA FABES (1)
- ARISTO (1)
- ARJO HOSPITAL EQUIPMENT (1)
- ARMAC (1)
- ARMATEC BYSTRONIC (1)
- Armaturenbau (5)
- ARO (1)
- AROS HYDRAULIK GMBH (1)
- ASCA (1)
- ASHTON (1)
- ASITECH (1)
- ASL INC (1)
- ASM / SIPLACE (1)
- ASM SESOTEC (1)
- ASP (1)
- ASSO (1)
- ASTED-MICROVERK APS (1)
- ASYS (2)
- ASYS/ROMMEL (1)
- ATG (1)
- Atlas Copco (13)
- Atom (6)
- ATOS (3)
- ATOTECH (1)
- AUDI, VW,BMW.FORD, (1)
- AUTOMAC (1)
- AUTOMATA (1)
- AUTOMAX (1)
- ... mais
A indicação da distância não é possível, porque não foi possível determinar sua localização. O pré-requisito é que seu navegador permita cookies e determinação de localização.
Fabricante:
(Categoria: 1300)
ABB 29
ABEL 1
Abus 8
ADL 2
AEG 12
AERZEN 1
Aerzener 3
AFA 3
Afriso 5
AFS 1
AGILENT 1
AGRAMKOW 1
AICHELIN 1
AIRCRAFT 2
Airtec 4
AL-KO 2
ALBIAN 1
ALBIS 1
ALDURO 4
Alfa Laval 14
ALKO 3
Allgaier 4
ALLROUND 1
ALMIG 1
ALPHA 4
Alpine 3
ALPMA 1
Alsthom 2
ALUP 2
AMETEK 1
AMOB 1
AMSLER 1
AMSY 1
AMUT 1
Ankom 2
Anritsu 2
APS 1
ARBURG 85
AREVA 1
ARISTO 1
ARMAC 1
ARO 1
ASCA 1
ASHTON 1
ASITECH 1
ASL INC 1
ASP 1
ASSO 1
ASYS 2
ATG 1
Atlas Copco 13
Atom 6
ATOS 3
ATOTECH 1
AUTOMAC 1
AUTOMATA 1
AUTOMAX 1
AZO 3
BABCOCK 1
BAIONI 1
BALLUFF 3
Balzers 2
BANDERA 4
Bar Gar 2
BARBARIC 1
BARETTA 1
BARRERA 1
BASSRA 1
BATTENFELD 12
BAUDIN 1
BAUMBERG 1
BDF 2
Becker 22
BEDESCHI 1
BEFRAG 1
BEFTEC 1
BEKO 3
BELIMED 1
BENETTI 1
BERTOCCO 2
BESANA 1
BHT 1
Bickel 2
BIESSE 1
BIG 5
BIGASS 1
BILLION 2
Binder 4
BIRIM 1
BIT 1
Bitherma 3
Bizerba 2
BKW 1
BLEFA 1
BLEYMEHL 1
BLOBEL 1
BLUE BOX 1
BMB 12
BMI 1
BOFA 13
Boge 8
BOKI 1
BOMAG 1
BORSIG 1
Bosch 91
BOTT 1
Bottero 14
Bous 4
BRABOR 2
BRAGONZI 1
BRAMIDAN 1
BRAMIN 1
BRANCO 1
BRAND 1
BREDEL 1
BREHMER 1
BRETON 1
Brinkmann 10
BTB 1
BTD 1
BTS 1
BUCHER 1
BUHLER 2
BUHMANN 1
BURSTER 1
BUSCH 67
BUSETTI 1
BXL 1
BüHLER 1
Bürkert 2
BüTER 1
BäUERLE 1
BäUMER 1
BöLLHOFF 1
CAB 1
CALPEDA 1
CARAT 1
Carrier 5
CASON 1
Caterpillar 35
CDE 1
CEAG 1
CEEVER 1
CEIA 1
CEM 1
CENTIOM 1
CEPHEID 1
CERESCON 1
CESAB 1
CHENTA 1
Cimbria 2
CINCINNATI 11
CISART 1
CLEAN 1
Cleanfix 2
CLEIA 1
Clena 14
CLIVET 1
CLOOS 1
CMG 1
CNC 1
CNC-STEP 20
CO-EL 1
COLGAR 1
COMET 1
COMP AIR 1
CompAir 4
COOLSOON 1
CORDIA 1
CORNING 1
COSEN 1
CPOAC 1
CRIZAF 7
CROUZET 2
CSAT 1
D+L 1
Dalex 2
DANDREA 1
Danfoss 7
DAR 1
DATRON 1
DE CROWN 2
DECANTER 1
DECORAL 1
DEGA 5
DEK 2
DEMAG 30
DEMATIC 1
DEN-JET 14
DENISON 4
DEUMA 1
DEUTZ 1
DHM 2
DIAMAC 1
DIASORIN 1
DIETZ 1
diverse 10
DIXI 1
DKF 1
DMG MORI 1
DOLLBERG 1
DONATI 1
DORNIER 1
DORST 1
DRAIS 1
DROPSA 1
DRUKOMAT 1
revendedor
aprovado
aprovado
25.000 € Crawler Excavator General data: Serial number: N80110140 Machine type: Crawler excavator Operating weight: approx. 30460 kg Dimensions (L x W x H): approx. 10560 x 3200 x 3200 mm Undercarriage: Track length on ground: approx. 4030 mm Ground clearance: approx. 500 mm Tail swing radius: approx. 3200 mm Performance: Maximum digging depth: approx. 10620 mm Maximum reach: approx. 10820 mm Maximum cutting height: approx. 10160 mm Maximum dumping height: approx. 7110 mm Description: Heavy-duty crawler excavator designed for large-scale excavation, earthmoving, and construction operations. The machine offers high digging performance, extended reach, and stability, making it suitable for demanding industrial and infrastructure projects. Auction-ID: A7-46062-3
revendedor
aprovado
aprovado
revendedor
aprovado
aprovado
62.5 running metres, 8/6/8 mm Height: 1.03 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 1030 mm height and 2,500 mm length Posts for concreting: 1600 mm Number of fence elements: 25 pieces Number of posts: 26 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 x 40, post c ...
revendedor
aprovado
aprovado
revendedor
aprovado
aprovado
revendedor
aprovado
aprovado
NC HORIZONTAL BORING MILL Inv. No. 13.033A1 Make SCHARMANN Model WF132AX Table 1,500 x 3,000 mm Spindle diameter 132 mm Taper ISO50 Longitudinal travel table 3.000 mm Cross travel 1,500 mm Vertical travel headstock 1.750 mm W-Axis 950 mm RPM 16 – 1,250 kW 30 Volts 380 Cycles 50 Auction-ID: A1-45737-132
revendedor
aprovado
aprovado
CONVENTIONAL LATHE Inv. No. 12.959C1 Make MONDIALE Model NEW CELTIC12 Serial number NJC12740731X90 Center distance 500 mm Max. swing over bed Ø 305 mm Max. swing over cross slide Ø 170 mm Spindle bore Ø 28 mm R.P.M. 35 – 1,500 (16x) HP 1.46 Volts 380 Cycles 50 Including: 3-jaw chuck Ø 160 mm Brake Coolant Auction-ID: A1-45737-124
revendedor
aprovado
aprovado
Year of construction 2022 Pressure Head Epson Auction-ID: A7-46036-6
revendedor
aprovado
aprovado
revendedor
aprovado
aprovado
CNC SINGLE COLUMN VERTICAL BORING MILL Inv. No.: 12.769D1 Make PITTLER Model PV1600 Control SIEMENS 880 Year of Manufacture 1995 Max Swing Ø 1600 mm Table diameter 1500 mm Z-Travel 800 mm X-Travel 1600 mm B-axis 360,000 Table speeds 2.8 – 450 rpm Driven tooling speed 0 – 5000 rpm Driven tooling type SK50 Rapids 12 m/min Motor 90 KW Electrics 440V – 3Ph – 50 Cycles Dimensions 9200 x 6900 x 4740 mm Weight of Machine 31500 KG Including: A.T.C., 20 Positions Flood Coolant Through spindle coolant Interlock guards Twin swarf conveyor Auction-ID: A1-45737-5
revendedor
aprovado
aprovado
revendedor
aprovado
aprovado
CONVENTIONAL LATHE Inv. No. 13.038C1 Make TOS Model SUI 50 Serialnumber 150200900558 Centre Distance 2000 mm Max. Swing over Bed Ø 500 mm Max. Swing over Cross Slide Ø 320 mm Max. Swing in gap Ø 560 mm R.P.M. 14 – 2240 kW 7 ,5 Volts 400 Cycles 50 Including : DRO Coolant Emergency stop Safety protection over chuck Auction-ID: A1-45737-133
revendedor
aprovado
aprovado
revendedor
aprovado
aprovado
revendedor
aprovado
aprovado
Digital display, incl. pallet, dimensions approx. 1500x1200 mm Auction-ID: A7-45974-1
revendedor
aprovado
aprovado
CONVENTIONAL LATHE Inv. No. 13.114C1 Make STANKO Model 1M635 Center distance 3.000 mm Max. swing over bed Ø 700 mm Max. swing over cross slide Ø 380 mm Spindle bore Ø 76 mm R.P.M. 10-1250 (16x) kW 15 Volts 380 Cycles 50 Including: 3-jaw chuck Auction-ID: A1-45737-174
revendedor
aprovado
aprovado
Auction-ID: A7-45393-37
revendedor
aprovado
aprovado
revendedor
aprovado
aprovado
revendedor
aprovado
aprovado
Power ( watts ) 450 Voltage ( volt ) 220 Auction-ID: A7-45393-25
revendedor
aprovado
aprovado
revendedor
aprovado
aprovado
MOBILE HORIZONTAL BORING MILL Inv. No. 11.583B1 Make GIDDINGS & LEWIS Model 230-5 Table 812.5 x 2,812.5 mm Spindle diameter 75 mm Taper MT 5 Horizontal spindle travel Longitudinal travel Cross travel Vertical travel headstock 2000 mm RPM kW Volts 400 Cycles 50 Hz Including: Digital read out Auction-ID: A1-45737-103
revendedor
aprovado
aprovado
CONVENTIONAL LATHE Inv. No. 13.188C1 Make PINACHO Model S-90/180 Mach.no. 22417 Centre Distance 750 mm Max. Swing over Bed Ø 360 mm Max. Swing over Cross Slide Ø 205 mm Spindle Bore Ø 42 mm R.P.M. 30 – 2000 kW 2.2/3.4 Volts 400 Cycles 50 Including: 3-Jaw Chuck Ø 200 1 x Steady Rest Toopost Rapid Original type A Coolant attachment Auction-ID: A1-45737-179
revendedor
aprovado
aprovado
revendedor
aprovado
aprovado
Large mixed lot of retail shelving and shopfitting elements removed from store interior. Includes wall shelving units, gondola shelves, perforated panels, textile display elements, corner elements, cabinets, counters, support columns, drawer units, metal brackets, shelf consoles, hooks, acrylic/PET holders, LED lighting elements, mirrors, slatwall panels, back panels, storage cabinets, and various mounting accessories. Quantities include numerous shelving elements (L600–L1250 variants), side panels, perforated display panels, drawer modules, base cabinets, display tables, and approximately 150+ wooden bases plus large quantity of metal shelf brackets and hooks. Also includes electrical/LED lighting components and PVC shelf profiles. Auction-ID: A7-40553-10
revendedor
aprovado
aprovado
Digital display, incl. pallet, dimensions approx. 1500x1200 mm Auction-ID: A7-45974-2
revendedor
aprovado
aprovado
revendedor
aprovado
aprovado
revendedor
aprovado
aprovado
Make COLCHESTER Model BANTAM 2000 Serial number 3/0015/00964 Center distance 750 mm Max. swing over bed Ø 330 mm Max. swing over cross slide Ø 220 mm Spindle bore Ø 32 mm R.P.M. 40 – 2.000 HP 3/2.5 Volts 400 Cycles 50 Including: 3-jaw chuck Rapid tool post Emergency stop. Threading Coolant system Safety protection screen Auction-ID: A1-45737-16
revendedor
aprovado
aprovado
Você não encontrar a sua máquina queria?
enviar inquérito procurado
a todos os revendedores (registo não é necessário)
