outras máquinas e instalações usadas para venda (16,650)

Malt scale with digital display, Additional title: Continuous flow scale with digital display, Fill sizes: 24 l, Capacity: 300 fills/h, Nominal capacity: 7 m³/h, Voltage: 240 V, Frequency: 50/60 Hz, Compressed air: 5 - 6 bar, Weight: 130 kg

A crate washer for cleaning the outside of bottle crates using spray nozzles., Material: stainless steel, Base construction: on feet

CIP tank with 4 separate tanks for water, lye, acid and disinfectant. The system consists of: - 4 tanks with various fittings - Feed and return pumps - 3 diaphragm dosing pumps - Pipework, pneumatic disc valves - Level sensors, in-line conductivity measurement, full and empty level probes, flow monitors., Additional title: Cleaning system with 4 vertical stainless steel vessels, Volume: 1270 l Caustic tank, acid tank, disinfectant tank, Operation / Control: Control cabinet for electrical and pneumatic systems, Bischof CPU, , Material: Tanks made of V4A or V2A stainless steel, Features: 4 x CIP tanks, 3 x diaphragm metering pumps, 3 x pneumatic diaphragm valves, feed pump, return pump, 8 x pneumatic ball valves, 3 x full-level sensors, 3 x empty-level sensors, flow monitors, conductivity measurement, level control, switch cabinet

Effluent plant for waste water treatment. Includes: - Mixing and equalisation tanks 1, 140 m³ - Mixing and equalisation tanks 2, 40 m³ - Mixing and equalisation tanks 3, 80 m³ - Bioreactor 1, 240 m³ - Bioreactor 2, 240 m³ - 2 air compressors for aeration in the reactors - Secondary sedimentation tank 1, 100 m³ - Secondary sedimentation tank 2, 100 m³ - Thin sludge tank, 70 m³ - Thick sludge tank, 90 m³ - Sludge dewatering 1 and 2 - Precipitant tank, 25 m³ - Various process water pumps, Bioreactor capacity 2 x: 240 m³, Operation / Control: Siemens Simatic S7, Features: Mixing and equalisation tank 1, 2 & 3; Pumping station 1 - inlet bioreactor; pumping station 2 - inlet bioreactor; bioreactor 1; bioreactor 2; pumping station - outlet bioreactors; 2 x air compressor; Precipitant tank; filling unit; 2 x flocculent mixing station; secondary sedimentation tank 1 & 2; mixing tank; t ...

Additional title: 4 container CIP, Capacity per tank: 3000 l , Number of tank: 4 pieces , Width: 1,3 m, Height: 3,4 m, Weight: 500 kg, Position: vertical, Features: Pressureless tanks, 3 tanks, every with 30 hl, d = 1,2 m, h = 2,8 m,1 tank with 25 hl for fresh water, d = 1,2 m, h = 2,2 m, feeding in of water of the main

FÁBRICA DE GALVANOPLASTIA DE PLÁSTICO ENTHONE GMBH, BJ. 2012: Sistema automatizado / área de aplicação: cromagem, níquel, cobre / Programas: pré-limpeza, pré-tratamento, metalização, pós-tratamento / Materiais base: ABS e ABSPC / Dados técnicos: Janela de mercadorias por transportador de produto 2800 mm x 1700 mm x 300 mm, máximo 8 metros quadrados de superfície galvânica por suporte de produto, tempo de ciclo 3,00 min. Sistema, tempo de ciclo 2,50 min. Desmetalização / saída: 20 peças transportadoras de mercadoria por hora, folga entre ânodo/ânodo crómio 700 mm, Cobre 700 mm, níquel 700 mm, dimensão de retração transparente 550 mm na direção de deslocação, 3100 mm de largura, dimensões do banho (enxaguamento) 3100 mm x 700 mm, / consumo de energia: acionamento: sistema de transporte 133 KW, filtro 194 KW, ar de escape 229 KW, sistema de esgotos 150 KW, c ...

A sachet machine (fully automatic form, fill and sealing machine) Merz for the chemical-pharmaceutical industry is available. Sachet seal edge sides: 3/4, lanes: 2, max. film roll width: 480mm, max. film roll diameter: 500mm, film core diameter: 70mm/76mm, mounted sachet format X/Y: 110mm/70mm, bag width range: 15mm-160mm, bag length range: 15mm-200mm, max. cycle rate: 100/min, production output: 200sachets/min, filling volume range: 0.2ml-250ml, weight: approx. 1000kg. Documentation available. An on-site inspection is possible.

Panel saw HOLZ-HER 1255 SECTOR pro -used-welded frame with extremely high rigidity, pneumatically evasive moving grate, stable detent of the saw carriage at the top and bottom, detent in the vertical cut electrically monitored, fold-down plunge lever on the sawing unit, retractable splitting wedge for cut-outs, control panel at eye level, digital display at the longitudinal stop, digital display for horizontal cut, stiffener cutting device, lifting roller transport system, edging support, Extraction device TRK, dust tested, has been

A CNC coordinate measuring machine Zeiss calibrated at the end of 2025 is available. Measuring dimensions X/Y/Z: 1200mm/1800mm/1000mm, max. workpiece weight: 2000kg, length measurement deviation: 2µm/L300, resolution: 0.2µm, measuring rate: 200/s, max. stylus length: 800mm, max. probe mass: 600g, measuring head: VAST Gold Scanning. Machine dimensions X/Y/Z: approx. 3000mm/2050mm/3550mm, weight: approx. 6000kg. Without grid plate, probe rack, software license and computer. Documentation available. An on-site inspection is possible.

A barely used foil die-cutting and embossing machine Kama with integrated hot foil stamping is available. Die-cutting force: 165t, max. sheet format X/Y: 760mm/600mm, min. sheet format: 279mm/210mm, max. die-cutting format X/Y: 743mm/585mm, production speed: 5500sheets/h, gripper margin: 10mm, min. paper weight: 100g/m², max. cardboard weight: 1500g/m². Machine dimensions X/Y: approx. 5000mm/2700mm/2750mm, weight: approx. 6000kg, operating hours: approx. 1000h. Including Kama AutoRegister, vacuum pump, compressor and servo main drive. Documentation available. An on-site inspection is possible.

A programmable Schleuniger stripping machine for coaxial cables is available. Cable diameter step resolution: 0.01mm, max. stripping length: 30mm, max. cable diameter: 7mm, throughput: approx. 350-600/h, cable lists: 100, cable programs: 1000, machine dimensions X/Y/Z: approx. 500mm/150mm/250mm, weight: approx. 10kg. Documentation available. An on-site inspection is possible.

Centrífuga de óleo NOVA.

A funcionalidade deve ser verificada, possivelmente utilizável como suporte de peças sobressalentes.

Pesador de verificação Fabricante: Mettler-Toledo Tipo CM 3571 AdvancedLine Ano de construção: 2020 Velocidade máxima da correia: 35m/min. Débito de 60 pcs/min. Faixa de pesagem 0 - 6.000 grões. Faixa de pesagem calibrada 80 – 6.000 gr. É uma combinação de alta qualidade de escala e testador Triagem específica para o cliente, conformidade MID 1.ª fase, transportadora de entrada, contentor de recolha, transportadora de saída, tampas, FreeWeight Nt com estatísticas, HMI 15 polegadas incluindo software AdvancedLine, célula de carga multi-resolução, empurrador, dispositivo de sinal, tecnologia de pesagem, célula de carga EMFR, gestão do utilizador, monitorização do estado da máquina, monitorização de sensores, botão de paragem de emergência, triagem Tesco Standard 2 Detetor de Metais Profile LS Combi: Largura da abertura 350 mm Altura de abert ...

A paper core cutting machine Sternberg & Phillips with parallel winding capability is available. Winding units: 1, max. core width: 1750mm. An on-site inspection is possible.

A barely used allround PCB handling station RG Elektro-Technologie for loading purposes is available. Application possibility: before AOI/after AOI/combined, PCB transport height range: 930mm-970mm, min. PCB dimensions X/Y: 80mm/50mm, max. magazine dimensions X/Y/Z: 360mm/360mm/570mm, machine dimensions X/Y/Z: approx. 1200mm/1700mm/1800mm, weight: approx. 250kg, control: Siemens S7-1200. Documentation available. An on-site inspection is possible. The image is an example.

A rotary can seaming machine with double seaming function CCC is available. Stations: 6, can diameter range: 202mm-502mm, can height range: 100mm-700mm. An on-site inspection is possible.

A mechanical Karges-Hammer eccentric press for series production in can manufacturing is available. Ram stroke: 75mm, flywheel speed: 80rpm, motor power: 3HP, speed: 294rpm. An on-site inspection is possible.

A rotary can seaming machine with double-seaming function CCC, which was overhauled by Schmalbach Lubeca, is available. Throughput capacity: 360cans/min, can height range: 77mm-285mm, stations: 6. An on-site inspection is possible.

A sheet metal blank feeding press Alfons Haar for metal can production in the packaging industry is available. Press force: 40t, stroke: 170mm, max. speed: 180rpm, drive power: 18.5kW, cutting circle diameter: 400mm, max. drawing depth: 55mm, max. sheet dimensions X/Y: 1150mm/1000mm, material thickness range: 0.1mm-0.5mm, throughput: approx. 520cans/min, machine dimensions X/Y/Z: approx. 8950mm/4500mm/3900mm. An on-site inspection is possible.

A mechanical Karges-Hammer eccentric press for series production in can manufacturing is available. Ram stroke: 75mm, flywheel speed: 80rpm, motor power: 3HP, speed: 294rpm. An on-site inspection is possible.

Manufacturer: GROSS Behälter- und Anlagenbau,Condition: used,Volume: 70,800,Bottoms: Klöpperboden,Design: horizontal,Stand shape: Saddles,Total height: 3,000,Total width: 3,000,Total length: 10,500,Type plate: Yes,Outlet: available,Remarks: Manhole approx. 350 x 450 mm in the front floor a container (9540-1) with a small bump under the bearing shell, a container (9540-2) without nameplate up to 4 identical additional tanks can be made available on request. The following saddle feet could be purchased separately for the container:

Equipment: Overpressure,Manufacturer: RIEGER Behälterbau GmbH,Condition: used,Volume: 83,500,Max. overpressure: 0.5,Max. permissible overpressure Operating temperature : 50,Specific gravity of the medium: 1.35,Design: upright,Stand shape: feet height adjustable,Number of feet: 8,Diameter inside: 3,850,Cylindrical height: 600,Total height: 8.690,Wall thickness underbody: 5.4,Wall thickness upper floor: 3.0,Year of construction: 2004,Technical documents: Drawing,Manhole / dome: in cylinder (approx. 350 x 450 mm),Type plate: Yes,Equipment: Ventilation/ventilation, spray head, crane eyelets,Outlet: DN100 DIN 11851 ,Remarks: Specified total height

A tubular machine (flat bag machine with winder) Honsel & Co., which was overhauled by PCM in 2003, is available. Roll width: 980mm, bag length range with wrap closure: 280mm-710mm, bag length range as tube without wrap: 710mm-1020mm. Includes a flexographic printing unit and extensive accessories for format changeover. Documentation available. On-site inspection is possible.

A Honsel bag making machine (packaging machine) is available. Working width: 500mm, wrapping closure: one-sided. Including cardboard flange feeder. The machine is partially dismantled. Toothed belts must be tensioned and partially replaced. Toothed belt wheels are disassembled and must be installed. On-site inspection is possible.

A Honsel bag making machine (packaging machine) is available. Working width: 500mm, wrapping closure: one-sided. Including cardboard flange feeder, folding table and deposit table with counter and feed. On-site inspection is possible.

A glass processing plant with several production lines is available. 1) Cutting line with automatic breaking system 2) Cutting line with automatic breaking system 3) Glass scrap disposal line 4) Glass scrap disposal line 5) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 6) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 and portal drilling machine, max. glass dimensions: 2600x2200mm 7) Control system 8) Water supply system for washing machines with circulation water treatment, sludge dewatering, chemical supply, and additional components 9) Horizontal tempering furnace Tamglass ProE-2442-ABS-20 10) Domino D550+ 10 (55W and 10mm scanner). A large number of spare parts, complete spare robots, and numerous glass racks in various formats are also available for purchase. Complete documen ...

A compact Sirona laboratory scanner for the dental industry is available. Scanning method: 5-axis robotic arm, technology: digital stripe light projection with autofocus, accuracy: less than 12µm, machine dimensions X/Y/Z: approx. 480mm/740mm/460mm, weight: approx. 40kg. Accessories included. Documentation available. On-site inspection is possible.