We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Tipo de máquina
Fabricante
- Bomba (7)
- Bomba de vácuo (54)
- Bomba de vácuo de garra seca (6)
- Bomba de vácuo de vane rotativa (16)
- Bomba
de pressão e vácuo (10) - Cabine de pintura (11)
- Compressor (8)
- Câmara de teste de temperatura (7)
- Equipamento de Laboratório (10)
- Forno (5)
- Granulador (5)
- Gravador de gravura granito+vidro (6)
- Máquina de lavar pressão (76)
- Reboques pesados (20)
- Separador (11)
- Servo motor 3000 rpm (10)
- Sistema de refrigeração (5)
- Sob jack (5)
- Tanque de armazenamento/ tanque de vinho/ tanque de sumo de fruta (9)
- Tanque de aço inoxidável (5)
- Tanque de água de extinção (8)
- Transmissão (5)
- Ventilador (9)
- 3D SYSTEMS (1)
- ABB (29)
- ABEL (1)
- ABI TRAILERS (1)
- ABS INAUEN (1)
- ABS Trading (2)
- Abus (8)
- ACHENBACH (1)
- ACTIVATEC (1)
- ADL (2)
- ADLER BUZZI (1)
- AEG (12)
- AEL GMBH LEISNIG (1)
- AEROTECNICA (1)
- AERZEN (1)
- Aerzener (3)
- AFA (3)
- AFA TECHNOLOGIES (1)
- Afriso (5)
- AFS (1)
- AGILENT (1)
- AGILENT TECHNOLOGIES (1)
- AGRAMKOW (1)
- AHRENS + BODE (1)
- AICHELIN (1)
- AIMS MOTION TECHNOLOGY (1)
- AIRCRAFT (2)
- AIRPOWER EUROPE (1)
- Airtec (4)
- AL-KO (2)
- AL-Ko Therm (2)
- ALBIAN (1)
- ALBIS (1)
- Alcatel Adixen (2)
- ALDURO (4)
- ALEXANDERWERK (1)
- Alfa Laval (14)
- ALFA LAVAL, WESTFALIA (1)
- ALFA-BILICI (1)
- ALFAMACCHINE (1)
- ALKO (3)
- Allgaier (4)
- ALLROUND (1)
- ALLWEILER (2)
- ALMIG (1)
- ALPHA (4)
- Alpha Technologies (3)
- ALPHASTAUB (1)
- Alpine (3)
- ALPMA (1)
- Alsthom (2)
- ALTENBERG ? (1)
- ALUP (2)
- ALUP KOMPRESSOREN... (1)
- AMACKER + SCHMID (1)
- AMAFILTER (1)
- Amandus KAHL (3)
- AMETEK (1)
- AMOB (1)
- AMSLER (1)
- AMSY (1)
- AMUT (1)
- ANALYTIK JENA (1)
- Ankom (2)
- ANLAGEN UND MACHINEN TECHNIK GMBH (1)
- Anritsu (2)
- Anton Paar (2)
- APS (1)
- APV / ZAMET / AMOS (1)
- AQUILA TECHNIC (1)
- ARBURG (85)
- AREVA (1)
- ARGA FABES (1)
- ARISTO (1)
- ARJO HOSPITAL EQUIPMENT (1)
- ARMAC (1)
- ARMATEC BYSTRONIC (1)
- Armaturenbau (5)
- ARO (1)
- AROS HYDRAULIK GMBH (1)
- ASCA (1)
- ASHTON (1)
- ASITECH (1)
- ASL INC (1)
- ASM / SIPLACE (1)
- ASM SESOTEC (1)
- ASP (1)
- ASSO (1)
- ASTED-MICROVERK APS (1)
- ASYS (2)
- ASYS/ROMMEL (1)
- ATG (1)
- Atlas Copco (13)
- Atom (6)
- ATOS (3)
- ATOTECH (1)
- AUDI, VW,BMW.FORD, (1)
- AUTOMAC (1)
- AUTOMATA (1)
- AUTOMAX (1)
- ... mais
A indicação da distância não é possível, porque não foi possível determinar sua localização. O pré-requisito é que seu navegador permita cookies e determinação de localização.
Fabricante:
(Categoria: 1300)
ABB 29
ABEL 1
Abus 8
ADL 2
AEG 12
AERZEN 1
Aerzener 3
AFA 3
Afriso 5
AFS 1
AGILENT 1
AGRAMKOW 1
AICHELIN 1
AIRCRAFT 2
Airtec 4
AL-KO 2
ALBIAN 1
ALBIS 1
ALDURO 4
Alfa Laval 14
ALKO 3
Allgaier 4
ALLROUND 1
ALMIG 1
ALPHA 4
Alpine 3
ALPMA 1
Alsthom 2
ALUP 2
AMETEK 1
AMOB 1
AMSLER 1
AMSY 1
AMUT 1
Ankom 2
Anritsu 2
APS 1
ARBURG 85
AREVA 1
ARISTO 1
ARMAC 1
ARO 1
ASCA 1
ASHTON 1
ASITECH 1
ASL INC 1
ASP 1
ASSO 1
ASYS 2
ATG 1
Atlas Copco 13
Atom 6
ATOS 3
ATOTECH 1
AUTOMAC 1
AUTOMATA 1
AUTOMAX 1
AZO 3
BABCOCK 1
BAIONI 1
BALLUFF 3
Balzers 2
BANDERA 4
Bar Gar 2
BARBARIC 1
BARETTA 1
BARRERA 1
BASSRA 1
BATTENFELD 12
BAUDIN 1
BAUMBERG 1
BDF 2
Becker 22
BEDESCHI 1
BEFRAG 1
BEFTEC 1
BEKO 3
BELIMED 1
BENETTI 1
BERTOCCO 2
BESANA 1
BHT 1
Bickel 2
BIESSE 1
BIG 5
BIGASS 1
BILLION 2
Binder 4
BIRIM 1
BIT 1
Bitherma 3
Bizerba 2
BKW 1
BLEFA 1
BLEYMEHL 1
BLOBEL 1
BLUE BOX 1
BMB 12
BMI 1
BOFA 13
Boge 8
BOKI 1
BOMAG 1
BORSIG 1
Bosch 91
BOTT 1
Bottero 14
Bous 4
BRABOR 2
BRAGONZI 1
BRAMIDAN 1
BRAMIN 1
BRANCO 1
BRAND 1
BREDEL 1
BREHMER 1
BRETON 1
Brinkmann 10
BTB 1
BTD 1
BTS 1
BUCHER 1
BUHLER 2
BUHMANN 1
BUSCH 67
BUSETTI 1
BXL 1
BüHLER 1
Bürkert 2
BüTER 1
BäUERLE 1
BäUMER 1
BöLLHOFF 1
CAB 1
CALPEDA 1
CARAT 1
Carrier 5
CASON 1
Caterpillar 35
CDE 1
CEAG 1
CEEVER 1
CEIA 1
CEM 1
CENTIOM 1
CEPHEID 1
CERESCON 1
CESAB 1
CHENTA 1
Cimbria 2
CINCINNATI 11
CISART 1
CLEAN 1
Cleanfix 2
CLEIA 1
Clena 14
CLIVET 1
CLOOS 1
CMG 1
CNC 1
CNC-STEP 20
CO-EL 1
COLGAR 1
COMET 1
COMP AIR 1
CompAir 4
COOLSOON 1
CORDIA 1
CORNING 1
COSEN 1
CPOAC 1
CRIZAF 7
CROUZET 2
CSAT 1
D+L 1
Dalex 2
DANDREA 1
Danfoss 7
DAR 1
DATRON 1
DE CROWN 2
DECANTER 1
DECORAL 1
DEGA 5
DEK 2
DEMAG 30
DEMATIC 1
DEN-JET 14
DENISON 4
DEUMA 1
DEUTZ 1
DHM 2
DIAMAC 1
DIASORIN 1
DIETZ 1
diverse 10
DIXI 1
DKF 1
DMG MORI 1
DOLLBERG 1
DONATI 1
DORNIER 1
DORST 1
DRAIS 1
DROPSA 1
DRUKOMAT 1
DSM 1
revendedor
aprovado
aprovado
300 € Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Auction-ID: A1-46354-40
revendedor
aprovado
aprovado
Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site. Auction-ID: A1-46354-63
revendedor
aprovado
aprovado
Length 240 cm; planed with rounded corners; impregnated Auction-ID: A1-46266-487
revendedor
aprovado
aprovado
Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Auction-ID: A1-46354-30
revendedor
aprovado
aprovado
Manufacturer: KONECRANES Model: STS KD-54 Factory designation / Serial number: G493 Year of manufacture: 2005 Condition: In normal working condition Technical specifications: - Crane weight: 783,000 kg - Operating hours: 37,537 h - Duty class: 3 - Power supply voltage: 20,000 V Spreader capacities: - Twin lift (2×20’): 45 t - Single lift (1×20’ or 1×40’): 40 t - Hook lift capacity: 50 t Lifting height and reach: - Max. spreader height above rail: 30 m - Lowering depth below rail: 14 m - Seaside outreach: 37 m - Landside outreach: 12 m - Crane rail span: 18 m Speeds: - Hoisting with load: 1.00 m/s (60 m/min) - Hoisting without load: 2.00 m/s (120 m/min) - Lowering with load: 1.00 m/s (60 m/min) - Trolley travel: 2.50 m/s (150 m/min) - Gantry travel: 0.75 m/s (45 m/min) - Boom hoisting time: 5 min Spreader movement: - Rotation: ±8° - Longitudinal tilt: ±5° Wheel loads: - ...
revendedor
aprovado
aprovado
free span, trusses c.c.h. 5000mm, consisting of 3 sets of intermediate trusses IPE200, 2 sets of end trusses with wind posts IPE160, equipped with wind bracing, pressure ducts, purlin lips on the rafters, detailed drawing intermediate trusses, steel construction is neatly ready for transport and must be picked up with 1 trailer, lot is loaded free of charge with a forklift Auction-ID: A1-41455-11
revendedor
aprovado
aprovado
In stock on pallet, total dimensions approx. 1200x800x1030 mm Auction-ID: A1-45790-579
revendedor
aprovado
aprovado
Length 390 cm; total approx. 500 pieces Auction-ID: A1-46266-363
revendedor
aprovado
aprovado
-Per day approx. 100l dehumidification capacity -without condensate tank with hose outlet -1.7 KW -Relatively quiet at 67db for the power and size of the device -Air volume flow 1200 m² per hour Auction-ID: A1-45790-48
revendedor
aprovado
aprovado
Toe forming machine for shaping and closing the front part of the shoe. Auction-ID: A7-46462-1
revendedor
aprovado
aprovado
Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Auction-ID: A1-46354-43
revendedor
aprovado
aprovado
Length 305 cm; Finger jointed, primed approx. 200 pieces Auction-ID: A1-46266-365
revendedor
aprovado
aprovado
various designs, in stock in open-fronted storage bins, incl. accessories, total dimensions approx. 500x310x200 mm Auction-ID: A1-45790-481
revendedor
aprovado
aprovado
Used for molding and applying heel counters. Auction-ID: A7-46462-13
revendedor
aprovado
aprovado
-Per day approx. 100l dehumidification capacity -without condensate tank with hose outlet -1.7 KW -Relatively quiet at 67db for the power and size of the device -Air volume flow 1200 m² per hour Auction-ID: A1-45790-65
revendedor
aprovado
aprovado
New Holland Tx36 Thresher 5.18m cutting with new Holland cutting carriage Hydrostatic Self-leveling box Straw spreader Air conditioning Reclining Table 800 Tire Box 40 Numerous parts such as threshing belt, new conveyor chains (complete straw puller), new screws, electric adjustments of the threshing elements. Auction-ID: A3-43524-36015
revendedor
aprovado
aprovado
In stock on pallet, dimensions approx. 1200x800x1120 mm Auction-ID: A1-45790-557
revendedor
aprovado
aprovado
revendedor
aprovado
aprovado
-Per day approx. 100l dehumidification capacity -without condensate tank with hose outlet -1.7 KW -Relatively quiet at 67db for the power and size of the device -Air volume flow 1200 m² per hour Auction-ID: A1-45790-47
revendedor
aprovado
aprovado
Dim. 700x1200x30 mm with horizontal shelves Auction-ID: A1-46266-304
revendedor
aprovado
aprovado
Machine used for creating decorative or functional creases on the shoe upper. Auction-ID: A7-46462-20
revendedor
aprovado
aprovado
According to photos, weight estimated, in 8 pallets. Approximately 70% are functional Auction-ID: A1-45666-28
revendedor
aprovado
aprovado
Dim. 700x1200x30 mm with horizontal shelves Auction-ID: A1-46266-306
revendedor
aprovado
aprovado
Span of tie rod between the rafters; trusses c.o.h. 4000mm; box section as uprights and lattice trusses; steel drawing; 3D drawing; roof pitch 25 degrees; 7 sets of intermediate rafters; equipped with tie rods with suspension strips; bracing and cross braces; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41455-18
revendedor
aprovado
aprovado
Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Auction-ID: A1-46354-12
revendedor
aprovado
aprovado
revendedor
aprovado
aprovado
revendedor
aprovado
aprovado
Dimensions x1: 1800x1100x3000 mm 9 levels Sold without contents Auction-ID: A1-46437-1219
revendedor
aprovado
aprovado
Length up to 590 cm ; B-choice; Pallet size 590x120x78 cm Auction-ID: A1-46266-503
revendedor
aprovado
aprovado
Product: Industrial high-performance lubricant (grease) for use in automatic lubricationsystems GR 1350-2.5 PD in 5 kg units Filling date: July 2023 Density: 0.9 g/cm³ Auction-ID: A1-45790-369
Você não encontrar a sua máquina queria?
enviar inquérito procurado
a todos os revendedores (registo não é necessário)
