outras máquinas para trabalhar o metal usadas para venda (10,816)

Technical data CNC die-sinking EDM machine Model: OPTIMAT 505 Control Indicator: NASSOVIA Control on the pictures turned on Configuration Automatic electrode or tool changer Work container with clamping plate Separate dielectric and filter system CNC control panel with screen and hand control unit Remarks Used condition with visible signs of wear and dirt. An actual editing function or a test run is not proven on the basis of the pictures. Nameplate information is not sufficiently legible in the available pictures. Note According to the operator, the machine was actively used in production until the end. Control and power indicators are switched on in the pictures. Auction-ID: A7-49302-81

TruLaser 5040 + LiftMaster Compact + Cooler + Extraction System + Gas Control Block Machine suitable for cutting 4000 x 2000 mm sheet The LiftMaster controls the unmanned loading and unloading of the Laser Cutting hours: 38195 Laser on: 56977 Laser can be seen working available end of September Auction-ID: A1-47358-15

Drilling unit VD40: Automatic tool changer 10 positions, Power supply and displacement Asynchronously controlled servo motors, servo controllers, Spindle speed Stepless 0 – 2,500 rpm (servo motors), Maximum torque 440 Nm, Lubrication Internal and external mist lubrication air/oil, Tool holder SK 40, Maximum thickness to be drilled 100 mm, Drill diameter 5 – 40 mm, Thread tapping M6 – M30, Center point option Yes, Galvanizing option Yes, Layout highlighting option (optional) Yes, Pneumatic clamping Yes, Voortman height control: Max. acceleration Z-axis 2,000 mm/sec, Max. speed Z-axis 365 mm/sec Plasma cutting unit Smart Focus 400: Min. thickness 3 mm Max. thickness 100 mm Max. pierce capacity 50 mm Slag-free cutting max. 40 mm Marking Yes, with the same consumables Plasma gas structural steel: Cutting O2 ( 99.9% pure clean, dry, oil-free ) Marking Argon Gas Shieldin ...

Machine number: 18,307Operating voltage: 400 VFrequency: 50 HzNominal current: 245 ACooling water pressure: min. 3 bar/max. 8 barCooling water volume: 70 l/minincl. gripping system and powder coating from the manufacturer RAPPControl: SIEMENS Auction-ID: A7-49089-242

Technical data Manufacturer: Lorch Type: Plasma Z 110 Design: Plasma cutter Serial Number: 803-1739-003 Cutting current range: 22–110 A Output voltage range: 80.8–84.4 V Open circuit voltage: 415 V Duty cycle: 35% at 110 A, 60% at 82 A, and 100% at 60 A Mains connection: 400 V, 3 Ph/PE, 50/60 Hz Connected load: 30.5 / 23.3 / 18 kVA Degree of protection: IP23 Insulation class: F Configuration With plasma torch and hose package, ground cable with ground clamp, compressed air filter unit, mobile equipment trolley and several packs of visible wear and spare parts. Remarks The machine comes from a plant closure, was actively used in production until the end and was electrified. Auction-ID: A7-49302-12

Condition can be seen in the pictures Auction-ID: A7-49330-85

Function: for surface cleaning/structuring/marking or for cutting/weldingLaser 1: Part number. 3248890Laser 2: Part number: 3248890Laser power: 100 WWavelength: 1064 nmComputer Datec: with Windows 11 Pro 64 bit, type: CLX 24-06232 Auction-ID: A7-49596-3

Auction-ID: A1-48745-29

Die-sinking EDM machine Control: Heidenhain / Erocom Table 780 x 500 mm Table length 780 mm Table width 500 mm Ampere 60 / 120 A Control Heidenhain Total power requirement 14.0 KVA Machine weight approx. 4.0 t Space requirement approx. 3.0 x 2.0 x 2.1 m Auction-ID: A7-49782-429

Auction-ID: A1-49674-21

- Three-dimensional measuring machine (CMM) with movable bridge. - Granite table surface 2200 x 1250 mm. - Approximate X-axis travel approx. 2200 mm. - Approximate Y-axis travel approx. 1000 mm. - Maximum measurement height approximately 700 mm. - Equipped with measuring head and probing system. - Includes control PC, dual monitor, desktop, and associated peripherals. - Includes accessories, calibration tools and measuring elements visible in the photographs. - The machine does not work and has impact damage to a column. Auction-ID: A7-48839-66

Beam polarization: 100:1verticalNominal tube voltage at maximum tube current: 533 VFilling voltage at maximum tube current: 530Maximum tube current: 65 Aincluding matching componentsReference: CES - Lot 138 Auction-ID: A7-49056-149

General Description Industrial vacuum heat-treatment furnace manufactured by MILCO, model VP 1350. Horizontal front-loading furnace designed for controlled thermal processing of metal components under vacuum or process-gas atmosphere. The installation comprises the furnace chamber, vacuum pumping equipment, process piping and separate electrical control system. Technical Details Manufacturer: MILCO Model: VP 1350 Machine type: Vacuum heat-treatment furnace Year: 2016 Power supply: 380 V, 50 Hz Installed power: 120 kW Horizontal cylindrical vacuum chamber Large hinged front loading door with multiple locking clamps Internal heating / hot-zone assembly Internal material support / transport system Vacuum pumping system Leybold-Heraeus vacuum equipment Cooling and process-gas piping Nitrogen filling system Pressure instrumentation Separate electrical control cabinet Touchscreen HMI control  ...

Condition: to be seen in the article pictures Auction-ID: A7-49330-12

Unused Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated Input Current: 14A Rated Input Power: 9.2KVA Open-circuit voltage: 256V Output current setting: 20-60A Rated Output Voltage: 104V Cyclic continuous factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Contact arch striking Weight: 14.7KG Dimensions: 535 x 210 x 380 Auction-ID: A1-40397-241

Usage: Cleaning, rust removal, descaling and surface preparation of metal parts. Auction-ID: A7-49604-7

Plate dimensions: 4000 x 1500 x 80 mmincl. one groovewith two tailstocksTip height: 400 mm Auction-ID: A7-49089-143

Auction-ID: A7-49229-12

Throat teachings Quantity: 14 pcs. different sizes see pictures Auction-ID: A7-49782-553

Separator Cutting Wheel 355mm Speed 3800 230Volt see pictures Auction-ID: A7-49782-449

Usage: Cleaning, rust removal, descaling and surface preparation of metal parts. Auction-ID: A7-49604-8

Auction-ID: A1-48979-51

Center height: approx. 200 mmAttention: without the measuring device shown in the photosPanel dimensions: 2000 x 400 x 250 mmincl. workshop cabinet as substructure Auction-ID: A7-49089-262

Auction-ID: A1-48745-54

General Description CNC sinker electrical discharge machine (EDM) manufactured by AGIE, equipped with an AGIEMATIC 4 CNC control and AGIEPULS pulse generator. Designed for precision machining of conductive materials using shaped electrodes, making it suitable for toolmaking, die manufacturing and precision component production. Technical Details Manufacturer: AGIE Model: Agiematic 4 Machine type: CNC sinker EDM Control: AGIEMATIC 4 Pulse generator: AGIEPULS ELESTA X/Y/Z digital axis display CRT operator terminal Dielectric work tank Dielectric filtration and circulation system Separate generator and electrical cabinets Integrated Z-axis ram head Condition Used industrial condition. The machine appears complete with AGIEMATIC 4 control, AGIEPULS generator, dielectric filtration system, work tank and electrical cabinets installed. Electronics show normal age-related wear and dust accumul ...

Auction-ID: A7-49229-82

Remarks The article comes from a company liquidation and was actively used in production until the plant closed. Auction-ID: A7-49302-135

- 15 KW-1455 rpm motor. - Fan with a diameter of approx. 800 mm. - Inlet tube diameter approx. 500 mm. - Maximum air flow 9000 m³/h. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-48166-10

- Equipped with 1 turbine. - Skip feeding system. - Crib capacity: 2 tons. - Dimensions of the cot: 130 x 190 x 110 cm. - Automatic loading and unloading by turning the drum and vibrating screen. - Shot blasting cabin of robust construction, lined with anti-wear steel. - Dynamic separation system for removal of coarse residues and small impurities. - Centrifugal vacuum cleaner included. - Parts introduction system by skipping with double safety: light barrier and mechanical safety. - Model 400 turbine, with 8-blade rotor and shot meter. - 40 hp turbine engine at 1,500 rpm - Shot driven with an approximate impact velocity of 75 to 80 m/s. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in  ...

Precision granite test bench in accordance with DIN 876, length 3000 mm, mounted on a metal support and sold with its metrology accessories visible. This equipment is intended for the geometric inspection of mechanical parts, shafts, cylinders and precision components. Thanks to its Güte accuracy class 1, it is a professional solution for quality control and metrology operations in industrial environments. The integrated guide rail and measuring holders enable various straightness, concentricity and geometry control operations. Ideal for: CNC machine shops Precision mechanics Quality Control Industrial Metrology Mechanical manufacturing Industrial maintenance Auction-ID: A1-48554-220