outras máquinas para trabalhar o metal usadas para venda (11,434)

Cutting diameter 320 mm Saw blade length 4570 x 27 x 0.9 mm Table height mm Cutting width 450 x 280 mm Drive power 4.0 kW Cutting speed 15 - 105 m/min Motor 380 V Total power requirement 4.0 kW Machine weight approx. 0.8 t Space requirements approx. 1.8 x 0.8 x 1.2 m Condition: unchecked (6)

The analyzer measures the deviations and displays them via a recorder. The EVTM device is used to measure gear parameters such as profile, flank line or pitch deviation. • It is mechanically applied to the gear wheel, and deviations are registered via electric displacement transducers (buttons). • The measurement results can then be evaluated or recorded via the first device (the recorder/analyzer). The EVRM is used in conjunction with the other two devices to process vibrations (acceleration/speed/displacement) and output them as an analog signal. It is used for: • Vibration diagnosis on machines (bearings, imbalance, alignment) • Resonance measurements for workpieces / test benches • As an interface between sensor (accelerometer) and meter/recorder/oscilloscope It is sold unchecked from a company closure

Chuck ø 315 mm incl. flange and screws Transport dimensions: 800 x 400 x 400 mm, approx. 75 kg

In a suitcase, as good as new

3× TOS 3-jaw lathe chuck (Ø80 / 100/ 160 mm)Lot of three 3-jaw spiral chucks from the manufacturer TOS.Condition:    •    used& nbsp;   •    traces of wear    due to age and use •    only complete as an item    •    manufacturer: TOS    •    type: 3-jaw spiral chuck, self-centering    •    Jaws: hard jaws    •    Included sizes:    •    Ø80 mm – IU 80 M1 –     •    Ø100 mm – 100/3-2 M1 – max. 5,300 min⁻¹    •    Ø160 mm – IU 160 M1 – max. 3,500 min⁻¹ & ...

2x MAPAL WWS indexable cutting tools in original boxes.

Manufacturer: Agilent Technologies Model No.: 6633B Type: System DC Power Supply (Laboratory Power Supply) Features: Precise voltage and current control Programmable via front panel and interfaces (GPIB, RS-232) Ideal for automated test systems Specifications (typical for 6633B): Output voltage: 0 – 50 V Output current: 0 – 2 A Power: 100 W High accuracy and stability Design: 19" rackmount, with handles for installation in test systems

2 machine vices, as good as new and unused Jaw width: 150 mm Jaw height: 50 mm Clamping distance: 300 mm incl. ring wrench, clamping claws, stop and slot nuts Transport dimensions: 800 x 600 x 400 mm, approx. 75 kg

Volume: 100L Design Pressure: 12Bar Test pressure: 17.16Bar Min./MAX Temp. 10/50 c

12mm.

Press force: 40 T Passage approx. : 630 mm

Machine number: 35-173-98Serial number: 2-0499Compressive force: 4.5 kNStroke: 60 mmincl. transport trolley

Lot of 5 used micrometers with integrated precision gauge. Manufacturer according to the imprint: Feinmesszeugfabrik Suhl GmbH and Steinmeyer. All devices are in wooden storage boxes, some with original inserts. Condition:Used, optical signs of wear present. Mechanics can be operated smoothly. Functional testing is only possible in principle. Foam inserts partially aged. Scope of delivery:1 micrometer with precision gauge in each wooden container.

Rid 350-550mm

Rated power: 5.5 kVA; Rated current: 25 A; No load voltage: 243 V; Output current: 20-40 A; Rated output voltage: 96 V; Cyclic duration factor: 40%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6095

Serial number: 564/90Operating voltage: 380 VControl voltage: 220 VConnection: 0.75 kWRated current: 10 A

Nimak power source, model GTRT 450 A/C; Nimak controller, model COSY-LS 2; Nimak Cooling Unit, Model KS 2

Jaw width: 160 mmincluding additional jawsReference: CES - Lot 33

consisting of 6 partspartly as good as newReference: Schmidt - Lot 46

Lot: 7 measuring equipment – U-touch screws, precision measuring devices, depth measuring screw, internal measuring deviceLot of 7 used precision measuring instruments in wooden or plastic boxes.According to the imprint, the manufacturer is mainly Steinmeyer, Feinmesszeugfabrik Suhl, and Mitutoyo. Included measuring instruments:Screw gauge Steinmeyer, 0–25 mm, precision dial gaugebow screw, Steinmeyer, 25–50 mm, precision dial gaugeU-clamp Steinmeyer, 20–45 mm, precision dial gauge / special jawsU-clamp screw Feinmesszeugfabrik Suhl, 0–20 mm, precision dial gauge (TGL 20250)Depth gauge Suhl, 0–150 mm, incl. extensions (No. 650)Mitutoyo U-measuring screw, 0–25 mm, 0.01 mm readingInternal gauge set with several attachments and extensions.Condition:Used, functional as far as verifiable.

Metal rack equipped with removable wooden plates fitted with plastic bushings for storing cylindrical tool holders.

two piecesdiameter: approx. 160 mmincl. spare jawsReference: Hansmann - Lot 41 Weight: approx. 30kg

Water-cooled, Welding current max. 345 amps see pictures

2 plastic boxes with assortment of clamping pads, various dimensions; see photos for more details

Includes 3 axial tool holders with Allen keys

Machine number: 2-0513Compressive force: 28 kNStroke: 60Table dimensions: 200 x 160 mmwith pneumatic punching tool mounted

Plastic racks with precision bores for storage of tool holders. Markings TR40, TR36, SK40,TR28

Siemens MIDIMASTER Vector variable frequency drive, input 380–480V ±10% 3-phase 32A 47–63Hz, output 0-input V 3-phase 26A (30A VT), frequency range 0–650Hz, motor rating 11000W / 15kW VT, protection class IP20, made in EU

Consisting of Table 2x Vibration metering, type VD4 2x Wenrdel conveyor type BF 40-L 12 4x linea conveyor HLF 25-M-12