outras máquinas para trabalhar o metal usadas para venda (11,393)

\"Cylindrical measuring pins (test pins) for bore testing, fit and dimensional control. What's in the box: • 3× full sets of test pens • Original casesCondition:Used. Traces of age and wear present on cases. Measuring pins optically neat, no visible damage. Cylindrical Measuring Pins / Test Pins – Sets (used)Manufacturer: • Richard Knauthe KG, Limbach-Oberfrohna • Schmalkalden (GDR production)Standard / Marking: • TGL 13620/I • \"Test Aids\" • Accuracy according to marking: ± 0.001 mm • Graduation: 0.05 mmCircumference / CompositionTotal: 3 complete sets • Set 1: Measuring range 2.0 – 3.0 mm • Set 2: Measuring range 3.0 – 4.0 mm • Set 3: Measuring range 4.0 – 5.0 mmAll sets are complete, in original cases (wood)\" Auction-ID: A7-46417-203

Test pin set (test measurement set) according to DIN 2269 for fine tuning and checking measuring equipment or for comparative measurement. The set is 7 pieces and covers the range 23.09 to 23.15 mm. Delivered in the original wooden box.Condition:Very good optical condition. Test pins clean, without any noticeable damage. Wooden box with slight signs of wear.Scope of delivery:    •    7 test pins according to the above list    •    Original wooden box    •    Standard: DIN 2269    •    Design: Test pins / gauge block-like test specimens    •    Quantity: 7 pieces    •     Nominal dimensions:23.09 / 23.10 / 23.11 / 23.12 / 23.13 / 23.14 / 23. ...

\"Mixed lot of measuring screws and measuring equipment – 5-part – mechanical – special designs – used5-part bundle of mechanical measuring equipment, consisting of shackle measuring screws and special/special measuring screws (including with a large round scale). • Type: mechanical measuring screws / special measuring screws • Reading: usually 0.01 mm • Measuring ranges: mixed (e.g. 5–30 mm, see pictures for other ranges) • Design: \"Metric\" Auction-ID: A7-46417-221

Item (2x) Digital micrometer 25 - 75 mm1. Mitutoyo 25–50 mmReading: 0.001 mmVersion: DigitalWith adjustment dimension & caseMeasuring range: 25–50 mmResolution: 0.001 mmWith ratchetWith original caseWith setting standard2. Mitutoyo 50–75 mmReading: 0.001 mmVersion: DigitalWith adjustment dimension & caseMeasuring range: 50–75 mmResolution: 0.001 mmWith ratchetWith original casewith adjustment standard Auction-ID: A7-46417-284

\"Granite measuring plate with measuring stand and digital Mitutoyo dial gaugeMeasuring combination consisting of granite measuring plate, measuring stand and digital dial gauge with guide. Measuring plate: • Material: hard stone (granite) • Dimensions: 400 x 250 x 50 mm • Design: ground measuring surfaceMeasuring stand: • Manufacturer: Hommelwerke • Type: MS-301 • Design: Column tripod with cross arm and clamp adjustmentDial gauge: • Manufacturer: Mitutoyo • Type: ID-C105-B • Item no.: 543-46B • Digital display (mm) • With guide / holder holder holder • Made in Japan\" Auction-ID: A7-46417-320

\"5-piece batch caliper, consisting of a Mitutoyo digital caliper, as well as several analog calipers and depth calipers. 1. Mitutoyo Digital Caliper • Type: CDN-20CX • Measuring Range: 0-200 mm • Resolution: 0.01 mm • Made in Japan 2. Digital Caliper (black/yellow, • Measuring range approx. 0-150 mm 3. Analog Caliper • Measuring range approx. 0-300 mm 4. Analog Depth Caliper (T-Shape) • Measuring Range approx. 0-150 mm 5. Analog Caliper (Classic Design) • Measuring Range Approx. 0-150 mm Item: Calipers / Depth calipers – mixed lotScope: Lot = 5 piecesManufacturer: Mitutoyo (digital), various/unknown (analogue)Design: analog & digital mixedMeasuring lengths: up to 300 mmResolution digital: 0.01 mm (Mitutoyo)Material: Stainless steelAccessories: Protective covers / bags (partial)\" Auction-ID: A7-46417-137

Manufacturer: TESA SA, SwitzerlandType: Quick-Control 1Name: TESA Quick-Control Measuring Table / Recording TableDescription:Only the measuring table from the TESA Quick-Control System is offered.It is a round precision measuring table with drilling pattern and mechanical adjustment unit for picking up and positioning workpieces for internal and external measurements. The measuring table is intended for use in dimensional and comparative measurement and is usually operated in conjunction with separate evaluation units and transducers.Scope of delivery:– TESA Quick-Control 1 measuring table– Accessories and adapter parts as shown– Original TESA transport case– Documentation in paper form – Scope of delivery only as shownCondition:Used. Traces of use present. Optical condition overall decent. – Measuring range: 0 – 170 mm– Measuring type: internal and external measurement� ...

\"Eyltool Steel Parallel Dimension Set 87 pieces, DIN 861 Grade 2Steel Limit Measure (Parallel Limit Dimensions) according to DIN 861, Quality Class 2. Version for length testing and adjusting measuring equipment. Set is complete. Used, good condition. • Manufacturer: Eyltool • Item no.: 3582287 • Standard: DIN 861 • Grade: 2 • Number of final dimensions: 87 pieces • Material: Steel • Reference temperature: 20 °C • Marking: Gage Blocks, Grade 2 • Measuring range (typical set): 1.005 mm – 100 mm (graded according to the composition in the set) • Storage: Wooden box with hinged lid\" Auction-ID: A7-46417-325

\"Item: Digital caliperManufacturer: HOLEXItem no.: 41 5611 300Measuring range: 0–300 mmVersion: DigitalSales: Hoffmann Group / HOLEX • Digital caliper 0–300 mm • mm / inch switching • Zero function • Stainless steel • Locking screw • Original plastic case • Documents availableCondition:Mint condition.Very good optical condition, no recognizable damage. In the original plastic case, with insert/instructions and silica gel. Measuring surfaces clean, display works. • Measuring range: 0–300 mm • Resolution: 0.01 mm • Display: digital • Material: stainless steel • Power supply: \"Button cell\" Auction-ID: A7-46417-148

Brand: NaberthermType: N 41/HControl: P300Electrically heated chamber furnace from Nabertherm with base. The furnace is suitable for heat treatment processes such as hardening, annealing or sintering. It is operated via the integrated P300 controller. Sale including documented accessories according to the scope of delivery. Condition:• Used• Normal signs of wear due to age and use• Refractory lining with visible signs of use• Control and display availableScope of delivery:• Chamber furnace Nabertherm N 41/H• Underframe• Control P300• Documentation (operating documents)• Accessories as shown• Delivery as shown• Manufacturer: Nabertherm• Model: N 41/H• Year of construction: 2010• Max. temperature: 1280 °C• Connection: 400 V / 3-phase / N / PE• Frequency: 50/60 Hz• Connected load: 15.0 kW• Control: P300• Degree of protection: IP according to nameplate ...

\"Complete metric gauge block set with 87 gauge blocks, consisting of: • F grading 1.001 – 1.009 mm • Further gradings 1.01 – 1.49 mm • Additional dimensions 0.5 / 1 / 1.5 / 2 / 2.5 / 5 mm • Longer gauge blocks 10 / 20 / 30 / 40 / 50 / 60 / 70 / 80 / 90 / 100 mmCondition: • Used, very neat condition • Measuring surfaces clean, without rust or chipping • Usual, slight signs of wear (fine surface lines) Article: Parallel gauge set / Gaugeset Design: metricAccuracy class: Grade 1Number of gauge blocks: 87 piecesReference temperature: 20 °CMaterial: hardened steelStorage: high-quality wooden box\" Auction-ID: A7-46417-154

\"Manufacturer: HAENNI (Switzerland)Device type: Mechanical thermo-hygrograph / recording devicewith weekly writing mechanism • Combined temperature and humidity recorder • Two writing arms • Chart roll for weekly recording • Scale right: °C and % RH • Key + spare writing refills available • Wall housing with lock\" Auction-ID: A7-46417-309

\"Lot of measuring balls G10 / H13 – different diameters – for envelope measurementFor sale is a lot consisting of several precision measuring balls (individual packaging) for envelope measurement. The balls are labeled with diameter and tolerance information, some with grade G10 and H13 reference. • Design: precision measuring balls • Grade: G10 in some cases • Tolerance specifications: ±0 or deviations (e.g. -1 / -3 / -6 μm) • Diameters include: • 10.0 mm • 10.319 mm • 13.494 mm • 17.462 mm • 19.288 mm • 19.305 mm • 72.7 mm • Other individual dimensions according to labeling • Partly with lot marking • Packaging: individually in bags\" Auction-ID: A7-46417-314

\"Manufacturer: Novotec / Intech EDMType / Name: Copper Threaded Electrodes for Die-sinking EDM M2.5 – M16 (various sizes) – Lotof copper threaded electrodes for die-sinking EDM machines (EDM) of various sizes.The electrodes come mainly from Novotec and Intech EDM and are intended for the EDM of threads (Thread EDM). The inventory includes several sizes from M2.5 to M16, some with flush bore and orbital design. The electrodes are mostly in original packaging or protective tubes and are unused or in stock. The electrodes are sorted by size and are located in storage boxes (M2.5 / M4 / M6 / M8 / M10 / M12 / M16).Copperthreaded electrodes consisting of different sizes: • M2.5 (with flush hole) • M4 x 0.70 orbital • M6 • M8 • M10 orbital • M12 • M16Partly in original packaging (Novotec) or protective tubes.Material: CopperApplication: Threaded EDM / die-sinking EDM (EDM)Typ ...

KEYENCE WM-3000 (Wide Area Coordinate Measuring Machine) mobile coordinate measuring machine. The system was delivered in November 2020 and is in well-maintained, functional condition. It is a complete measuring system including accessories, software and transport cases. Scope of Delivery • WM-3000 transducer • WM-P3000 Probe • WM-C3000 Control/Camera Module • WM-S1 camera tripod • 3x WM-B1 batteries • WM-BC1 charger • OP-99032 Power Cord • Laptop with WM measurement software installed • Transport case • Calibration certificate (09/2020) • Inspection Result Condition • Functional • Visually well-groomed • Calibration from 09/2020 (new factory calibration recommended) • Sale from ongoing operations The WM-3000 is an optically guided 3D coordinate measuring system for the large-volume measurement of components in the range of 300 mm to 3,000 mm. Measuremen ...

\"Mitutoyo V-Gauge Set (2-piece) – 1–15 mm & 10–25 mm – 0.01 mm – in a casetwo-piece set Mitutoyo V-Gauge (also tooth width gauge screws). The measuring screws are designed for measurements on gears, grooves, profiles and inclined surfaces. Two measuring ranges are included: • V-gauge 1–15 mm, reading 0.01 mm (type marking: VM3-15, item no. 114-101) • V-measuring screw 10–25 mm, reading 0.01 mm (type marking: VM3-25, item no. 114-102) • Manufacturer: Mitutoyo • Measuring ranges: 1–15 mm and 10–25 mm • Reading: 0.01 mm • Design: mechanical, metric • Measuring surfaces: V-measuring surfaces (tooth width measurement)\" Auction-ID: A7-46417-217

\"U-screw gauge set / outer micrometer UltraPrecision Messzeuge GmbH – 75–150 mm – 0.01 mm (incomplete, 3 pieces) – in a wooden boxOuter micrometer/U-micrometer set in the original wooden box from UltraPrecision Messzeuge GmbH.The set is not complete: There are only 3 micrometers available (measuring ranges 75–100 / 100–125 / 125–150 mm).Accessories/adjustment dimensions are partly available. • Manufacturer: UltraPrecision Messzeuge GmbH • Device type: U-screw gauge / outer micrometer (set, incomplete) • Number of micrometers: 3 pieces • Measuring ranges: • 75–100 mm • 100–125 mm • 125–150 mm • Reading / resolution: 0.01 mm • Storage: wooden box • Scope of delivery: 3 micrometers + available accessories in the box \" Auction-ID: A7-46417-349

\"Renishaw ball stylus for use on coordinate measuring machines (CMMs). • Manufacturer: Renishaw • Manufacturer no.: A-5000-7721 • Type: Ball button / stylus • Ball material: Plastic / rubber (black) • Shaft material: Metal • Thread: Renishaw standard (external thread, exact size not specified) • Application: Coordinate measuring machines (CMM) • Compatibility: Renishaw pushbutton systems\" Auction-ID: A7-46417-264

\"Digital U-Clamp Gauge 125–150 mm with Adjustment DimensionManufacturer / Type:MitutoyoCode No. 293-251Model MDC-150MJDescription:Mitutoyo digital micrometer in the measuring range 125-150 mm. Version with ABSOLUTE measuring system and digital display unit. Delivered in the original Mitutoyo wooden case including adjustment dimensions and documents as shown. Solid, torsion-resistant temple with heat-insulating handle. Preset and Zero/ABS function available. Visually good used condition with usual traces of storage on the wooden box. Measuring surfaces and spindle optically maintained. • Measuring range: 125 – 150 mm • Resolution: 0.001 mm • Measuring system: Digital ABSOLUTE • Display: LCD • Functions: Preset / Zero • Manufacturer: Mitutoyo • Origin: Made in Japan • Code no.: 293-251\" Auction-ID: A7-46417-277

\"Precise final dimension of 100 mm made of steel with integrated magnet for secure fixation on metallic surfaces. Suitable as a reference dimension for testing, setting and comparison measurements in the workshop, measuring room and quality assurance. The final dimension is in a storage box and shows signs of wear due to age or use, which do not impair its function. • Type: Gauge block / Length-Normal • Nominal dimension: 100 mm • Material: steel • Design: magnetic • Magnet: integrated (2 magnetic surfaces visible) • Marking: \"100\" folded in • Storage: \"Plastic box\" Auction-ID: A7-46417-265

\"Test pin post 1–5 mm (4 individual sets)Richard Knauthe KG / KS SchmalkaldenTGL 13620/ICylindrical measuring pinsstep 0.05 mmTest pin post consisting of four individual sets in the range of 1.00 mm to 5.00 mm.Included are: • 1.00 – 2.00 mm • 2.00 – 3.00 mm • 3.00 – 4.00 mm • 4.00 – 5.00 mmThe first three sets are from Richard Knauthe KG, Limbach-Oberfrohna (TGL 13620/I).The 4-5 mm set is from KS Schmalkalden. Each set contains 21 pins in 0.05 mm increments.Supplied in wooden boxes or metal boxes (4–5 mm). Total measuring range: 1.00 – 5.00 mmGraduation: 0.05 mmTotal number of pins: 84 piecesStandard: TGL 13620/I (3 sets)Manufacturer: Richard Knauthe KG / KS Schmalkalden\" Auction-ID: A7-46417-290

\"U-screw gauge set (external measurement) – 4-piece set – with wooden cases – used4-piece set of mechanical U-clamps for external measurements, mainly in original wooden cases. The measuring screws come from industrial stock, apparently classic German/GDR production (including precision measuring tool factory), some with package inserts and adjustment dimensions. • Type: Screw gauge (outside) • Reading: 0.01 mm • Measuring range: 100 mm (according to case marking) • Design: metric • Cases: wood, partly with accessories / adjustment size\" Auction-ID: A7-46417-222

\"Calibration gauge for tip calipers 0–500 mmCalibration gauge for tip calipers in a wooden case.The gauge is used to check and adjust tip calipers over defined test distances. Several reference dimensions are engraved on the bar. The design is made as a solid, ground steel strip with threaded holes on the sides for mounting or fixing. Engraved reference dimensions (visible):10 mm / 10.00 mm / 20.30 mm / 60.0 mm / 80.50 mm / 120.41 mm / 160.72 mm / 380.15 mmTotal length according to the tape measure approx. 500 mm. Type: Calibration gauge for tip calipersMeasuring range: up to approx. 500 mmMaterial: steel, ground Referencepoints: several engraved test distancesDesign: with threaded holes\" Auction-ID: A7-46417-334

Lot of two used gauge blocks for length testing and adjustment of measuring equipment.Included are:    •    1× Carl Zeiss Jena gauge block, TGL RGW 720/0, in plastic case    •    1× Gauge block from unknown manufacturers, in a wooden boxBoth sets are not complete, individual gauge blocks are missing.Condition:    •    u sed    •    signs of wear due to age and use Auction-ID: A7-46417-115

\"Mitutoyo U-gauge 75–100 mm – 0.01 mm – type OM-100 – in the caseU-screw gauge from the manufacturer Mitutoyo, type OM-100. The measuring device covers the measuring range 75-100 mm and has a reading of 0.01 mm. • Manufacturer: Mitutoyo • Type: OM-100 • Measuring range: 75–100 mm • Reading: 0.01 mm • Version: mechanical, metric • Ratchet: available Auction-ID: A7-46417-215

Standard: DIN EN ISO 3650Tolerance class: Class 1ID: 5392Condition • Used • Measuring surfaces visually good, with slight, normal traces of use • Wooden case with signs of wear and tear • Nominal dimension: 300 mm • Design: long-end dimension with through-holes • Material: steel • Tolerance class: 1 (precision measuring equipment)\" Auction-ID: A7-46417-206

\"Steel Parallel Gauge Set Grade 2, Made in USSRincompleteSet of steel gauge blocks (parallel gauge blocks) in a wooden box. Manufacturer not clearly recognizable, manufactured in the USSR. The sentence is incomplete. According to the enclosed note, several gauge blocks are missing (including 1.10 mm; 1.20 mm; 1.40 mm; 1.50 mm; 1.60 mm; 1.70 mm; 1.80 mm; 2.00 mm; 3.00 mm; 4.00 mm; 5.50 mm; 6.00 mm; 7.00 mm; 10.00 mm; 90.0 mm – without guarantee, according to the note in the lid). Existing final dimensions show signs of wear due to age and use. Wooden box with clear traces of storage and use. • Design: Steel parallel gauge blocks • Original quantity: 87 pieces • Grade: 2 • Unit of measurement: mm • Reference temperature: 20 °C • Origin: Made in USSR • Box: \"Wood\" Auction-ID: A7-46417-328

\"Description:Dial Gauges / Digital Dial Gauges – Lots ofGoods Manufacturer:Mainly Mitutoyo (Japan)Quantity:8pieces Analog dial gauges (mostly): • Pitch 0.01 mm • Classic round scale design • With driver / split-seconds hand • Different sizes • Some with protective bars • Manufacturer's marking Mitutoyo (including No. 2046S / comparable types)Digital dial gauges: • Mitutoyo ABSOLUTE / DIGIMATIC • Models include ID-C1025B (code 543-454B, 25.4 mm / 0.01 mm) • Other Mitutoyo digital dial gauges (different generations) • mm/inch, Zero/ABS, preset functions\" Auction-ID: A7-46417-250

\"Digital caliper 0–150 mm with sliding measuring tipsMitutoyocode no. 573-101-10Model NTD10-15CMitutoyo digital caliper with sliding probes.Version with ABSOLUTE Digimatic system and digital display. Ideal for special measuring tasks due to adjustable or movable measuring legs (see label \"with movable measuring tips\"). Scope of delivery: • Caliper • Original plastic case • Serial number available • Made in JapanUsed condition with slight optical traces. Measuring surfaces optically clean. • Measuring range: 0 – 150 mm • Measuring system: ABSOLUTE Digimatic • Display: LCD • Functions: ON/OFF, ZERO/ABS, ORIGIN • Battery: SR44 • Code no.: 573-101-10 • Model: NTD10-15C • Manufacturer: Mitutoyo • Origin: Made in Japan\" Auction-ID: A7-46417-278

\"Large batch of measuring and testing equipment – angles, thread gauges, hair angles, scribing tools, accessoriesLots of various measuring and testing equipment from workshop stock. Included are hair angles (partly TGL, Made in GDR), precision angles, several small stop angles, thread gauges (including Whitworth 55°), feeler gauges, scribing tools, a Mitutoyo dial device (5 mN), various cutting and blade tools as well as numerous protective cases. • Hair angle with marking TGL 6163/1 – Made in GDR • Several precision angles in different sizes • Thread gauges \"Whitworth 55°\" – Made in Germany • Feeler gauge set (0.05 mm visible, among others) • Mitutoyo measuring device, type 546-113, 5 mN • Various small L-brackets (different dimensions marked) • Marking blades / cutting tools in wooden case • Some with protective cases\" Auction-ID: A7-46417-316