outras máquinas para trabalhar o metal usadas para venda (10,789)

Manufacturer: Amada Year of manufacture: 1999 Model: GS 630 Type of machine: Hydraulic Shear Cutting force: 197 KN Power: 5.5/7.5 KW/HP Stroke: 160 mm Voltage: 400/415 Volts Amperage: 16 A Frequency: 50 Hz Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: HAAS Year of Manufacture: 07/2012 Model: ST-30 Type of machine: CNC Lathe Voltage: 360-480 V Phase: 3 Frequency: 50/60 Hz Full load amps: 70 amps Interrupting capacity: 10,000 amps Included equipment: bar feeder Condition: motor and gearbox fault present, requires repair Find more here - .ucymachines/ Contact us at - sales@ucymachines

5-axis CNC vertical machining center Type: UMC-750 Manufactuter: HAAS Year: 2014 Control: Haas Hours: 22000 X: 762 mm Y: 508 mm Z: 508 mm Max spindle speed: 12000 rpm Find more here - .ucymachines/ Contact us at - sales@ucymachines

General Description CNC CO₂ laser cutting machine manufactured by TRUMPF, model TruMatic L3030. Designed for precision cutting of sheet metal including mild steel, stainless steel, and aluminum. The machine is equipped with an automatic dual pallet changer, Siemens SINUMERIK 840D CNC control, and a TRUMPF TruFlow 3200 laser source. According to the delivery documentation, dismantling and loading must be carried out by an authorized TRUMPF service provider. Technical Details Manufacturer: TRUMPF (Germany) Model: TruMatic L3030 Machine type: CNC CO₂ laser sheet metal cutting machine Year of manufacture: 2006 Machine serial number: A0220A1386 Laser source: TRUMPF TruFlow (TLF 3200 TM) Laser source serial number: D0004 A4339 Laser power: 3,200 W (3.2 kW) CNC control: Siemens SINUMERIK 840D Power supply: 400 V / 50 Hz Connected load: 73 kVA Power supply unit: Hüttinger Elektronik GmbH I ...

tube diameter: - mmbar diameter: - mmno. of strokes: - Hub/mintotal power requirement: - kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC vertical lathe Type: SKIQ 12 CNC Manufacturer: TOS Mechanical repair: 2026 Avaíable: 10/2026 Control: Mefi CNC 856 Clamping plate diameter: 1250 mm Maximum turning diameter: 1700 mm Maximum workpiece weight: 12000 kg Clamping plate speed: 2.5 – 500 rpm Main motor power: 40 kW Tool magazine: 15 positions Dimensions: 6100 × 5050 × 5255 mm Machine weight: 27000 kg In very good condition, fully functional, after repair Find more here - .ucymachines/ Contact us at - sales@ucymachines

table length: 2000 mmtable width: 1000 mmtable height: 660 mmweight of the machine ca.: 0,98 tdimensions: 2,0 x1,0 x 0,66 mWelding table / Straightening table- Plate thickness 150 mm- M20 threads on the plate and in the side side panelsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Poli Model: Sky 2 Type of machine: 3D coordinate measuring machine, bridge-type, manual Year of manufacture: 2003 - Code: SKY2manuell - Measuring range (X/Y/Z): 650 / 500 / 400 mm - Accuracy: plus/minus (4 + 3L) micrometers - Resolution: 1 micrometer - Construction: granite axes and granite measuring table with threaded holes - Bearings: wear-free, static air bearings on all axes - Weight compensation: pneumatic (Z-axis) - Measuring head: Renishaw MH20i, manually rotatable/swiveling, with PS2R star stylus - Accessory: ceramic calibration sphere, diameter 25 mm - Connections: 230 VAC, compressed air minimum 5.5 bar (160 l/min) - Measuring software: PowerINSPECT Manual PLUS (extended version) - Functions: stylus calibration, nominal-actual comparison against CAD, GD&T; (form and position tolerances), point cloud digitization (2D/3D), tabular and graphical reports - Interf ...

Manufacturer: Amada Year of Manufacture: 2007 Model: EMK3610NT Type of machine: Punching machine, including MP300 loading unit, tooling and Wilson X-Sharp grinding machine Capacity: 300 kN punching force Number of tool turret stations: 58 Power required: 27 kVA Noise level: 91 dB(A) Stopping distance: 360 mm Weight: 24,500 kg Transformer model: Marx TG 214 Transformer rated output: 30 kVA Transformer primary rated voltage: 3 x 400 V (plus or minus 10 percent) Transformer secondary rated voltage: 3 x 200 V Transformer primary rated current: 44 A Transformer secondary rated current: 87 A Transformer frequency: 50/60 Hz (plus or minus 1 Hz) Transformer supply fusing: 400 V / 27 kVA / 63 A Transformer insulation class: T 40 F Transformer protection rating: IP 23 Transformer dimensions (L x B x H): 740 x 550 x 680 mm Transformer gross weight with packaging: approximately  ...

Manufacturer: Boschert Year of Manufacture: 2014 Model: Compact 1000 Rotation Type of Machine: CNC punching machine with rotating head TECHNICAL SPECIFICATIONS - Punching force: 28 t (280 kN) - Tool system: Trumpf tool system, sizes 1 to 3, up to diameter 105 mm - Rotating head: all tools infinitely rotatable 360 degrees - Control unit: Boschert CNC 32050 control unit with TFT control panel - Working area: 1060 x 2080 mm - Sheet thickness capacity: up to 6 mm steel - Power supply: 3 x 400 V / 50 Hz - Connection load: 18 kVA - Control voltage: 24 VDC - Required fuse protection: 3 x 20 A METER READINGS (FROM CONTROL UNIT) - Machine on: 5,722 hours - Hydraulics on: 1,285 hours - Stroke counter: 2.3 million strokes Regarding the dimensions: The machine’s key technical specifications are as follows: working area 1,060 × 2,080 mm, punching force 28 t (280 kN), Boschert CNC 32050 con ...

Manufacturer: Traub Year of Manufacture: 2002, factory overhaul completed 2018 Model: TNK 36 Type of Machine: CNC automatic lathe Operating Hours: approximately 147,007 hours, as of June 2026 CONTROL SYSTEM - Control: TX8i (64 bit), 14 inch flat screen - Additional V24 RS232 interface in the control cabinet - MDE interface in control cabinet, machine running and piece counter - Thread cutting without compensating chuck - Polyform function for C-axis - Tool monitoring MAIN SPINDLE - Spindle bore: 36 mm - Maximum speed: 6,300 rpm - Drive power: AC 6.7 / 10.7 kW - C-axis - Change parts: Hainbuch - Mounting aid base body - Manual Hainbuch change device COUNTER SPINDLE - Counter spindle as motor spindle - Spindle bore: 32 mm - Maximum speed: 6,300 rpm - Travel Z4: 250 mm - Rapid traverse Z4: 30 m/min - C-axis - Device for counter clamping pressure - Workpiece ejector device - Increa ...

CNC lathe Type: LYNX 220 C Manufacturer: Doosan Year: 2008 Control: Fanuc Hours: 17100 Spindle overhaul in 2025 Max. turning diameter: 320 mm Max. turning length: 305 mm Swing diameter over bed: 510 mm Swing diameter over slide: 290 mm X: 175 mm Z: 330 mm Spindle speed: 4000 rpm Spindle passage: 76 mm Bar capacity: 65 mm Turret: 12 positions Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

spindle diameter: 100 mmx-travel: 1400 mmdismantled: ja tool adaptor: SK 50 digital: ja weight of the machine ca.: 14 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre distance: 1500 mm: 210 serial number: 1289 multifix: ja : ja weight: 1,45 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece diameter: 5 - 1.000 mmmodule range: 0,2 - 25 helix angle: < 90 °Control: Wenzel GearTec faceplate diameter: 750 mmx-axis: 1.200 mmy-axis: 550 mmz-axis: 1.000 mmtotal power requirement: 6,5 kWweight of the machine ca.: 11 tdimensions of the machine ca.: 3,30 x 3,15 x 2,70 mSoftware:BMain, FPDFPPostAction, GrafTool, TAlign,TAnalyse, TApplication, TCali, TCut_INPUT,TCut_MEAS_EVAL, TGear_INPUT, TGear_MEAS_EVAL,THob_INPUT, THob_MEAS_EVAL, TMesblatt, TPlot,TRoot_INPUT, TShaft_INPUT, TShaft_MEAS_EVAL,TStat, TStylus, WMI, wingeco.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

5-axis CNC machining center Type: DMU 50 ecoline Manufacturer: DMG Year: 2009 Control: Siemens Sinumerik 810D ShopTurn Spindle hours: 22061 Total hours: 48861 X: 500 mm Y: 450 mm Z: 400 mm Max spindle speed: 8000 rpm Tool magazine: 30 positions Clamping: SK40 Heidenhain workpiece probe Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

dimension of workpiece: 400 mmvoltage: Vfeed power: weight of the machine ca.: 1900 tdimensions of the machine ca.: 2,5 x 1,5 x 2,4 mmodule: 0,5 - 15 mmThe KLINGELNBERG P 40 is a fully automatic CNC-controlled gear measuring center with a compact machine design. It was specifically designed for the lower workpiece diameter range up to 400 mm and is suitable for the precise inspection of a wide variety of rotationally symmetrical components.The measuring center can be used, among other applications, for the inspection of spur gears, shaving cutters, gear cutting tools, worms and worm wheels, hobs, and bevel gears. In addition, the machine is also suitable for general dimensional, form, and position measurements as well as for the inspection of camshafts, rotors, and similar workpieces.The P 40 features a rigid mechanical structure with machine bed, workpiece rotary drive, column with ta ...

table length: 600 mmtable width: 580 mm0: 650 x 580 x 250 mmweight: 400 kgc-axis: 0Number of revolutions: 60 rpmtype of pallet-changer: WEC tool changer made by:: WEC accessories:: Diverses weight of the machine ca.: 4 tdimensions of the machine ca.: 350 x 285 x 280 cmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Prinzing Model / Type: FME 4-600 Type of machine: Flanging machine Year of manufacture: 2012 Thickness: 4.0 mm Length: 65 mm Weight: 3650 kg Voltage: 400 V Power: 12 kW Current: 8.5 A Certification: CE Condition: Only has training hours on it Find more here - .ucymachines/ Contact us at - sales@ucymachines

Carousel Turning and Milling Machining Center with 2 machines + 7-pallet storage + 2 setup stations Each equipped with multiple turning and milling units (vertical/horizontal) Capto C6 or HSK100 Manufacturer: Waldrich Coburg Year: 2005 1 x MultiTurn 1500 FM, 1 x Multitec 2000 Control: Siemens Find more here - .ucymachines/ Contact us at - sales@ucymachines