outras máquinas têxteis usadas para venda (230)

Button machine, knee lever press, crimping machine, eyelet machine, workshop press with foot pedal-Knee lever press: with foot pedal, on solid base frame-Table size: 260 x 180 mm bore Ø 60 mm-Spindle holder: Ø 32 mm-Intermediate dimension: 135 mm-Dimensions: 460/400/H1450mm-Weight: 113 kg

Reel, reel rod, trapezoidal thread spindle, spindle -Reel: Reel rod with quick-release fastener -Type: unfortunately without a type designation -Shaft: Ø 44 mm, dimensions see photos -Dimensions: Ø 98 x 440 mm -Weight: 3.3 kg

A custom-built multi-stage nonwoven line for the production of two-layer or multilayer technical nonwovens made of synthetic or natural fibers with free-flowing materials such as herbs or seeds is available. Material weight range: approx. 100g/m²-1000g/m², needle machine manufacturer: Dilo, max. roll width: 2100mm, max. production speed: 200m/h, needling capacity: approx. 1200strokes/min, main motor: 45kW Siemens, total system dimensions X/Y/Z: approx. 10m/4.5m/4.5m. Process steps: nonwoven web feeding, carrier nonwoven feeding, material feeding (herbs), material dosing, material distribution, top nonwoven laydown, needle station, cutting/to length cutting, winding/rewinding, dust extraction. Documentation available. An on-site inspection is possible. The line is complete including accessories, peripheral equipment and a small sample needle machine.

A take-up winding machine Sahm for parallel winding is available, traverse width range: 10mm-300mm, max. spool diameter: 400mm, wound material: monofil, max. tape width: 30mm, max. yarn speed: 600m/min, max. winding width: 310mm, max. spool weight: 20kg, tension force range: 10cN-1250cN, winding heads: 90, documentation available, on-site inspection is possible.

Nominal width: 3000mm, Working width range: 600mm-2800mm, Layers: 1, Number of chambers: 6, Heating system: Gas, Air supply: top/bottom, Max. working speed: 100m/min, Chain arrangement: horizontal, Cooling cylinders: 2, Padder: twin cylinder Matex 6000, Exhaust fan: 1, Documentation available, On site inspection is possible.

A textile washing machine and a textile dryer, both from the manufacturer Nexia, are available. 1) Textile washing machine Nexia LC 55, year of manufacture: 2018, connected load: 9kW, heating medium: steam, max. steam pressure: 4.5bar, drum speed: 829rpm, max. batch weight: 55kg, drum diameter: 977mm, drum depth: 753mm, drum volume: 565l, machine weight: approx. 1700kg. 2) Textile dryer Nexia 55S, year of manufacture: 2018, connected load: 2.2kW, drum speed: 25rpm, drum volume: 1085l, drum diameter: 1200mm, max. batch weight: 36kg, heating type: steam, machine weight: approx. 800kg. Documentation available. An on-site inspection is possible.

A complete gray fabric preparation and further processing line with butt seam sewing machine as well as an automatic double, folding and measuring system from MontiMac Italy is available. 1) Gray preparation line MontiMac model 1090, year of manufacture: 2013, material: cotton, fabric width range: 1800mm/3000mm, seam type: butt seam, material feed: pallets/bales, max. roll diameter: 500mm, sewing unit: TA21-3FY, cleaning brushes: 2. Including inspection table, brush cleaning unit, dedusting and fabric outlet. 2) Super automatic double, folding and measuring machine MontiMac Lafra 200TDD with pallet based design, double triangle usable width, machine usable width: 1600mm, max. fabric package folding height stacking height: 2000mm, max. table load: 1500kg. Including fold counter, control measuring system and length counter. 3) Butt seam sewing machine MontiMac TU03/105 with movable frame.  ...

A fully automatic rubberized 90° fitted sheet production line (fitted sheet) Automatex Canada is available. Orientation: W/L and L/L, material feed: unwinder, sewing heads: 4, sewing head distribution left/right: 2/2, end product: fitted sheet corners/box formation, corner angle: 90°. Including tension control, edge and web guiding, longitudinal hemming station with elastic band insertion, length measurement, cross cutting and conveying units. Documentation available. An on-site inspection is possible.

Stitch type: double lockstitch, number of needles: 2, max. stitch length: 12mm, sewing speed: 2500stitches/min, presser foot lift height: 9mm, clearance A/B: 10mm/20mm, needle spacing range: 3mm-30mm, needle system: 134-35. Machine dimensions X/Y/Z: approx. 1100mm/600mm/1700mm, weight: approx. 75kg. On-site inspection is possible.

A two-station crimping and blocking machine Theo Leibrock is available. Stations: 2, processed materials: leather/leather composites/upper materials/thin plastics, machine dimensions X/Y/Z: approx. 1000mm/1000mm/1750mm, weight: approx. 400kg. Documentation available. On-site inspection is possible.

A máquina de cobertura é usada para cobrir de forma rápida e eficiente colchões de todos os tipos. Foi especialmente concebido para materiais de espuma, especialmente colchões de espuma. Os núcleos a processar podem também ser cobertos com algodão, lã ou tecido tricot. Como funciona: Os núcleos do colchão são colocados numa mesa transportadora de rolos na parte de trás da máquina e depois alimentados para as duas correias de prensagem dispostas lateralmente. Graças ao seu perfil antiderrapante, as correias de prensa capturam de forma fiável os núcleos e guiam-nos através da entrada de ar em forma cónica. Os grãos são comprimidos em largura de tal forma que a tampa, que anteriormente era aplicada manualmente à boquilha, pode ser puxada por cima dele sem qualquer problema. O par de cintas transporta os núcleos de forma segura e uniforme para dentro da cobertura.  ...

Two 1-needle lockstitch industrial sewing machines Juki are available. 1) Juki PLC 1760, year of manufacture: 2006. 2) Juki PLC 1710, year of manufacture: 2009. Documentation available. An on-site inspection is possible.

A shoe cutting press from Deutsche Vereinigte Schuhmaschinen (DSGV-/USM Group) is available. Press force: 25t, table dimensions X/Y: 900mm/450mm. Machine dimensions X/Y/Z: approx. 1000mm/900mm/1550mm, weight: approx. 300kg. An on-site inspection is possible.

À venda existe um sistema de cabides de roupa distribuídos por 2 andares, comprimento 25 m; largura 18 m O enchimento semiautomático com carruagens móveis pode ser carregado até 100KG por carruagem. O sistema foi desmantelado por nós e pode ser assumido imediatamente

Features: automatic edge guidance for high quality roll presentation, measuring function, large inspection area, cut length function, foot operated on off switch, speed control, reverse capability, emergency stop, locking wheels allow easy movement. Cradle: with 6 rollers, max. roll width: 1800mm, inspection surface: 600mm, max. re-roll diameter: 400mm, operating speed: 0-45m/min, motor: 1x230V/50Hz, 1x120V/60Hz, length: 2450mm, width: 1500mm, height: 1110mm, weight: 302kg. Condition: counter not connected, was removed, switch for the backlight is missing, on off switch is missing, foot pedal for start/ stop is missing, cutting knife is missing. Operating hours unknown. An on-site inspection is possible.

Working width: 2500mm, needle beam stroke: 60mm, max. stroke frequency: 1200/min, drive motor power: 22kW, number of needle boards: 6, length: 1100mm, width: 3800mm, height: 2020mm, weight: 5.2t. Without electronics, spare parts: needle beam, gearbox, bearing housing, bearings, and others. An on-site inspection is possible.

A Polytex foam coating machine is available. Roll width: 1900mm. Machine dimensions X/Y/Z: approx. 2350mm/2300mm/2500mm, weight: approx. 2400kg. Documentation available. An on-site inspection is possible.

A water jet cutting system Expert Systemtechnik with a high-pressure pump BFT is available. 1) Cutting system Expert Systemtechnik cutEXPERT variojet, year of manufacture: 2020, product: leather/foam materials/technical textiles/rubber materials/composite materials/packaging material, max. cutting speed: 70m/min, repeat accuracy: +/-0.2mm, water consumption: approx. 0.2l/min, cutting dimensions X/Y: 1800mm/3000mm. 2) High-pressure unit BFT Servotron 40.45+, year of manufacture: 2020, drive power: 45kW, max. flow rate: 4.6l/min, design pressure: 4200bar, max. operating pressure: 4000bar. Machine dimensions X/Y/Z: approx. 2000mm/1000mm/1400mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible.

A Brückner high-performance stenter, drying and fixing machine with steam heating is available. Chain type: SK917, min. product width: 600mm, max. product width: 3600mm, infeed length: 5000mm, outfeed length: 5000mm. Documentation available. An on-site inspection is possible.

Punching width: 500mm, rated current: 20A, control voltage: 220V, weight: 2.5t. No defects known, regularly maintained, operating hours unknown. With punching tools and punching blade, only little documentation available. An on-site inspection is possible.

Various sewing machines are available. 1) Bartacking machine Dürkopp 570. 2) Bartacking machine Dürkopp 570. 3) Overlock/binding machine CSTA 2542-53, needle: 1, thread: 2. 4) Overlock/binding machine CSTA 2542-53, needle: 1, thread: 2. 5) Overlock/binding machine CSTA 2542-53, needle: 1, thread: 2. 6) Sewing machine Pfaff 463-6/27. 7) Sewing machine Dürkopp Adler 271-14004. 8) Sewing machine Pfaff 481/900/99, needle: 1. 9) Sewing machine Pfaff 1181 Racing Puller. 10) Sewing machine Dürkopp Adler 272. An on-site inspection is possible.

diameter: 800 mmroll surface width: 1800 mmheating system: Sattdampf 00: 860 Liter0: 5 barmax. temperature: 168 ° Cweight: kgrange L-W-H: 2,2 x 0,8 x 0,8 m4 pieces in total, drying drums Ø 800 mm, steam-heated, including pedestal bearings,foto no. 4 shows how the drying cylinder works.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

These are 21x21 inch and 30x42 inch warp beams, for direct warping and knitting mills. With documentation, without accessories. No defects known, last overhauled. An on-site inspection is possible.

Max. punching force: 500kN, max. punching stroke: 200mm, max. punching area: 1800x750mm, connected load: 39kVA, length: 6500mm, width: 3900mm, height: 2900mm, net/operating weight: 7.8/10.2t, operating hours: 56,645h, with documentation. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible.

Max. punching force: 300kN, max. punching stroke: 200mm, max. punching area: 1800x750mm, connected load: 11kVA, length: 4800mm, width: 3400mm, height: 2800mm, net/operating weight: 10/13t, operating hours: 2818h, with documentation. The control was renewed in 2022. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible.

Max. punching force: 500kN, max. punching stroke: 200mm, die support dimensions: 13,200x1500mm, conveyor belt dimensions: 7435x1995mm, max. punching area: 1800x750mm, max. strokes: 80/min, connected load: 34kVA, length: 6500mm, width: 3900mm, height: 2900mm, net/operating weight: 7.8/10.2t, operating hours: 52,680h, with documentation. Equipped with extraction system, rotatable tool enabling nesting, tension-free unwinding possible. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible.

Four fabric inspection machines are available (1) Menzel WOB 1.600mm fabric inspection machine, working width: 1600mm (2) Menzel WOB 3.200mm fabric inspection machine from Hoftex, working width: 3200mm (3) Bauch Maschinenbau CB-WU 380 fabric inspection machine (4) Maag CT 5206-Ah fabric inspection machine. On-site viewing is possible.

A package with a Brückner stenter frame and additional elements is available: 1) Brückner stenter frame SPR 2, 2) Goller washing machine, 3) ECO-Heat exhaust air purification system for Brückner stenter frame, 4) Foulard with Küsters control unit and hydraulic unit, 5) Pleva SL 2.1 entry straightening unit, 6) RS Scheuchl heat recovery system, 7) Pleva SL 2P exit straightening unit. An on-site inspection is possible.

A package of eleven Dyeing Machines is available, 1) 5x Dyeing Machine Airflow AFT 225, 2) 1x Dyeing Machine Then AFS 50, 3) 1x Dyeing Machine Then AFE 50, 4) 1x Dyeing Machine Fongs HST 130/32, 5) 1x Dyeing Machine Then DN 200, 6) 2x Dyeing Machine Then OFHT 170. An on-site inspection is possible.

A fabric spreading machine Kuris is available. Length: 13000mm, belt width: 1800mm, width: 2150mm. Includes Pionier Super PC Electronic control and unwinding device. Documentation available. An on-site inspection is possible.