retificadoras usadas para venda (2,206)

Inner Diameter 1000 Auction-ID: A1-45711-337

: neu : ca. 2 - 4 Wochen ab Auftr : 4852.45 €: 250 x 40 x 51 mm: 1300 x 75 mm: 1,4 kW: 1400 1/min: 15 m/s: 42 mm: 600 mm: 540 mm: 1190 mm: 1200 x 800 x 1000 mm: 70 kgWith base frame, integrated suction and brakeHigh performanceBelt grinding device height adjustable 0-90°.Maximum usable face grinding areaBelt adjustment with fine adjustmentLongitudinal stop for material guidePerfectly balanced and low vibrationConnection on both sides for dust extraction Ø 50 mmMotor protection switch with undervoltage releaseFixed stop1 Sanding belt standard (brown), grit 801 grinding wheel 250 x 40 x 51 mm, grit 80Spark protectionConnection cable with CEE plugALTERNATIVES:Version without suction (Art. 330.365)Version without stand, suction and brake (Art. 330.360)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Engine 0.37 KW-2850 rpm. - Maximum wheel diameter approx. 200 mm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-723

grinding length:1500 mmgrinding width:700 mmworkpiece height:580 mmtable load capacity:2380 kptable speed -stepless-:5 - 35 m/mingrinding wheel dia. x width:500 x 100 x 203 mmgrinding wheel motor:18 kWspeeds::stufenlos elektronisch total power requirement:35 kWweight of the machine ca.:12 tdimensions of the machine ca.:5,3 x 2,9 x 3,8 (3,18) msurface grinding machine,paper-filter,DRO 3 axis,automatic infeed,el.handwheel,full cabin

: neu : ca. 6 Monate ab Auftragse : Taiwan : 21560 €: 413.95 €: 457 mm: 460 x 146 mm: 450 x 150 mm: 482 mm: 180 mm: 1900 mm: 1400 mm: 2130 mm: 680 kg: 208 x 12,7 x 31,75 mm: 1,5 kW: 3 mm: 0,01 mmmanual vertical feedmanual longitudinal and cross movement of the tablegrinding wheel spindle on 4 high precision angular contact bearingselectro-magnetic chuck150x450 mmcoolant equiptment with filtermanual dresser with diamondgrinding wheelgrinding wheel flangegrinding wheel balancing scalebalance arborLED machine lampmachine and equipment according to the CE-regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding length max. 70 mm, clamping diameter max. in the hood 165 mm, headstock bore 28 mm, speed of the headstock spindle 500-750-1000 rpm Auction-ID: A7-45768-40

Important information on the auction and processing: Pick-up is only possible after prior written appointment. Only the item designated in the heading (only the machine) is for sale. Objects, attachments, tools, pallets, shelves or other materials visible in the photos are not part of the auction unless they are expressly mentioned in writing in the item description. All dimensions, weights, technical data and operating hours are approximate indications. No guarantee is given for correctness and completeness. Deviations are reserved. A forklift (1.6 t) is available by arrangement. There is no entitlement to free loading assistance, unless it is not time-consuming. In the event of extraordinary or disproportionate effort, we reserve the right to charge separately for any additional expenses incurred. The buyer is solely responsible for dismantling, loading and transporting. Mining is ...

grinding diameter:250 mmgrinding length:2710 mmmax. module: min. module: total power requirement:45 kWweight of the machine ca.:15 tspace required L x W X H:7,1 x 4,7 x2,7 mmax. wheel dia.:450 mmSpindle drives Arena SiemensFor Worm grinding we have not module, but pitch. Pitch is freely programmable from 0.001 to big value i.e. 500mm

grinding height:-- mmgrinding width:220 mmgrinding wheel diameter:762 mmtotal power requirement:90 kWweight of the machine ca.:13 tgrinding spindle 1 drive::37 kWgrinding spindle 2 drive::37 kWGrinding machine for pre-grinding the connecting rodWith 2 replacement spindle motors

x-travel:400 mmy-travel:250 mmworkpiece height:500 mmgrinding diameter:220 mmtable surface area:600 x 320 mmthroat:310 mmrange of angles:12 °grinding wheel stroke - vertical:110 mmstroke speeds:0 - 6 m/mingrinding spindle speed:bis 50000 U/minperipheral speed:max. 35 m/seccapacity:ca. 7 kVApower capacity:6 kWweight of the machine ca.:2 tdimensions of the machine ca.:3 x 3 x 3 mrotary table d = 300 mmfrequency changerTexte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht.Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt.Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt.Copyright © 2005-2024, Josef Weber. All rights reserved.

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 2100 €: 75 mm: 75 x 2000 mm: 200 x 75 mm: 530 mm: 3 kW: 35 m/s: 475 - 1240 mm: 1100 mm: 550 mm: 1035 mm: 100 kgIndustrial-belt grinding machinePowerful motorEnclosed grinding head ensure a very effective extraction systemThermal overload protectionEmergency stopElectronic motor brakeAdjustable supportEye protectionStepless adjustable working heightSelf adjusting belt tensionerOperating manual in German or EnglishALTERNATIVEVersion TAS 75X/2 with 2 speeds € 2.530,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 Wochen ab Auftragse : Italien : 17940 €: 344.45 €: Dm. 200x78x78 mm: 2800 1/min: 300 mm: 300x150x55 mm: 350x150 mm: 500x160 mm: 3.6 kW: 1020 mm: 820 mm: 2170 mm: 440 kgThis Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it isequippedwith a long column supported by four bearings and is opportunely stiffenedby a sturdy column support.This Surface grinding machine, due to its stiffness and geometrical stability,is highly suitable for grinding with precision pieces of notable height: single or mass-produceddie-shop components, moulds, punches, gears and others.Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motorto the axis,equipping this model of Grinding machine with fixed table,allow preserving perfect work conditions over the years, too.CAST IRON BED to maintain the geometric stability ...

: neu : 2025 : 050141 : prompt, Zwischenverkauf v : Polen : 2821.24 €: 1 : 200 x 32 x 32 mm: 1 kW: 2800 1/min: 42 mm: 470 mm: 250 mm: 1050 mm: 60 kgQuiet running, maintenance-free motorLaterally closed protective hoodsStable, adjustable workpiece supportsHigh safety comfort due to adjustable spark deflectorsSuitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc.Motor circuit breaker and undervoltage releaseSpark/eye protection on both sidesConnection cable with CEE plug 16 A1 grinding wheel each coarse and fineALTERNATIVES:Version without suction (Art. 317.762)Version without stand, suction and brake/emergancy push button (Art. 317.774)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter:600 mmgrinding length:3000 mmcentre height:300 mmweight of the machine ca.:11,8 tdimensions of the machine ca.:7100x2300 mmspindle turning speed range:14 - 220 U/mingrinding wheel diameter:650 mmgrinding wheel flange for width 25-40 mm:3 Stk.open tailstocks:3 Stk.chuck:Ø310 mmfixed steady:320 mmDistance between center: 3000 mm.Height of centres: 300 mm.Spindle speed: (n°12) 14 - 220 RpmMax grinding diameter: 600 mm.Stroke the wheelhead:(rapid) 50 mm.Stroke the wheelhead:(rapid+ micrometrical): 1 5 500 m mmm. .Max grinding wheel diameter: 650 mm.Max tilt table: 3° 30'Total absorbed power: 27,7 HpDimension: 7100x2300 mm.Weight approx: 11800 Kg.

grinding diameter:600 mmgrinding length:3000 mmcentre height:315 mmworkpiece weight max.:3000 kgwork piece spindle speed:8 - 120 U/mingrinding wheel motor:25 kWgrinding wheel speed:45 m/secgrinding wheel width x diameter:750 x 80 mmtable speeds:30 - 4500 mm/minfeeds of grinding head:0 - 5 mm/mintable swivelabel +/-:7,5 °total power requirement:55 kVAweight of the machine ca.:18 tdimensions of the machine ca.:11,5 x 4 x 2,2 m- Internal grinding device- taper grinding up to 10,1° based on diameter- automatic grinding cycle- grinding wheels and flanges- dressing device- coolant attachment- dust exhauster, various steady rests

workpiece diameter:5-125 mmgrinding depth:50-1000 mmclamping length:1000 mmtotal power requirement:1.9 KVAweight of the machine ca.:630 kgmax. workpiece weight:100 kgCenter Hole Grinding Machine.Workpiece must be rotated by machine during grinding

grinding length:600 mmgrinding width:300 mmworkpiece height:450 mmtotal power requirement:8 kWweight of the machine ca.:2,2 tdimensions of the machine ca.:2,8 x 3,0 x 2,0 mgrinding spindle speed:1440 / 2905 U/minwith magnetic plate 600 x 200 mmautom. vertical feed coolant attachmentTexte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht.Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt.Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt.Copyright © 2005-2024, Josef Weber. All rights reserved.

Inner diameter 980mm Auction-ID: A1-45711-338

grinding length:450 mmgrinding width:250 mmworkpiece height:280 mmTable area:760 x 250 mmgrinding spindle drive:2,5 kWgrinding wheel dia. x width:250x 25 mmgrinding spindle speed:1430/2900 U/minway of grinding spindle saddle, vertical:400 mmtotal power requirement:4,5 kWweight of the machine ca.:1,8 tdimensions of the machine ca.:1,8 x 1,4 x 2,0 mMachine equiped with magnetic plate- dresser

grinding length:450 mmgrinding width:250 mmworkpiece height:280 mmTable area:760 x 250 mmgrinding spindle drive:2,5 kWgrinding wheel dia. x width:250x 25 mmgrinding spindle speed:1430/2900 U/minway of grinding spindle saddle, vertical:400 mmtotal power requirement:4,5 kWweight of the machine ca.:1,8 tdimensions of the machine ca.:1,8 x 1,4 x 2,0 mMachine equiped with magnetic plate- dresser

grinding diameter:380 mmgrinding length:1000 mmcentre height:180 mmgrinding wheel diameter:400 mmmax. workpiece weight between centres:250 kgtotal power requirement:10 kWweight of the machine ca.:4,1 tdimensions of the machine ca.:3 x 2 x 1,6 mwith internal grinding attachmentwith fixed and swivelling headstockwith coolant tank

Auction-ID: A1-45711-3

honing diameter:51 mmstroke:300 mmspindle speeds::600 - 3000 U/minfeed range:1500 - 5000 mm/minspindle drive:1,1 kWweight of the machine ca.:0,8 ttotal power requirement:4 kWdimensions of the machine ca.:1,1 x 1,9 x 1,5 m

Auction-ID: A1-45711-155

Drill Bit Grinding Machine: Additional station for grinding back the drill cutting surface (clearance angle) 25tk. Collets ER 40 are included in the scope of delivery, these are also suitable for clamping intermediate sizes. For grinding twist drills made of HSS and Tungsten carbides with a TiN layer of 8 - 32 mm. Rotor with precision ball bearings guarantees smooth running. Vibration-free running due to high weight and rubber feet. Sharpening angle adjustable for all common twist drills. Packaging Dimensions: 430 x 240 x 240mm. Weight 16Kg. Grinding range 8 - 32 mm Sharpening angle min./max. 90 - 140 degrees Connection voltage 230 V Condition: never used / new (5) Auction-ID: A7-45761-841

grinding diameter:300 mmgrinding length:600 mmcentre height:190 mmz-axis:865 mmx-axis:250 mmclamping length:1000 mmperipheral speed:45 m/secgrinding slide swivable +/-:8 °grinding wheel width x diameter:80 x 508 mmwork piece spindle speed:1 - 800 U/minweight of the machine ca.:5 tMachine with SIemens 840 C control- coolant device- Marposs measuring device

Technical data Manufacturer: Overbeck Type: 250 RU Year of Make: 1984 Workpiece diameter max.: 100 mm Max. grinding length: 250 mm Tip height: 100 mm Grinding wheel: Ø 300 mm Max. workpiece weight: 12 kg Spindle speed workpiece: 150–1350 min⁻¹ Grinding spindle: 2040 / 2440 min⁻¹ Power: 4–7 kW Weight: approx. 1350 kg (net) Configuration Hydraulic table movement Internal cylindrical grinding device Collet holder DIN 6341 Swivelling workpiece and grinding headstock Manual and automatic delivery Hydraulic quick adjustment Auction-ID: A1-45711-301

Auction-ID: A1-45711-62

Belt sander Moror Speed 2850rpm Moror power 3.0KW see pictures Condition: unchecked (6) Auction-ID: A7-45761-868