retificadoras usadas para venda (2,191)

electric magnetic plate, chuck, magnetic chuck, magnetic chuck-Clamping surface: 1000 x 255 mm-Connection: 100 volts DC-Dimensions: 1000/255/H98 mm-Weight: 140 kg

Deburring machine, pipe deburrer, bore deburrer, deburring device, brush deburring machine, wire brush -Manufacturer: Keil, Keil-Single deburring machine with base -Drive: 3.0/2.0 kW / 3000/1500 rpm -Brush: Ø 200 mm, Ø 200-250-300 mm possible -Brush width: 60 mm, 20-40-60-80-100 possible -Dimensions: 800/800/H1210 mm -Weight: 110 kg

Table dimensions X/Y: 900mm/350mm, magnet dimensions X/Y: 600mm/350mm, max. workpiece height: 375mm, max. table load: 300kg. Machine dimensions X/Y/Z: 3200mm/2600mm/2400mm, weight: approx. 400kg. Documentation available. An on-site inspection is possible.

A knife surface grinding machine Reform without coolant, separation and filtration system is available. Grinding length: 1300mm, magnetic table dimensions X/Y/Z: 1350mm/150mm/1300mm, grinding spindle power: 5.5kW, table swivel: +/-90°, machine dimensions X/Y/Z: approx. 3000mm/1000mm/1500mm, weight: approx. 1500kg. Documentation available. An on-site inspection is possible.

band width: 150 mmband length: 3500 mmband speed: 30 m/secScheiben-Ø: 400 mmgrinding feed: 0 - 5 m/minwork piece revolutions: 0 - 140 U/minpower capacity - workpiece power: 2,2 kWgrinding diameter: 100 - 600 mmclamping length: 6000 mmbed length: ca. 8000 mmvoltage: 380 V / 50 Hzmotor speeds:: 1450 U/minpower capacity: 15 kWweight of the machine ca.: 9,5 tdimensions of the machine ca.: 8,6 x 2,6 x 2,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding dimensions X/Y: 600mm/305mm, max. workpiece height: 350mm, feed rate X: 24m/min, feed rate Y/Z: 2m/min, machine dimensions X/Y/Z: approx. 3000mm/2700mm/2500mm, weight: approx. 3200kg, control: Siemens Sinumerik. The control has a circuit board defect. Documentation vorhanden. An inspection on site is possible.

Suitable for automatic grinding of all types of tools. Accessories: Total enclosure, Knoll E53319 bandfilter system, Numrotoplus software, Numroto software for simple milling cutters and cords,, Numroto software for simple and complex drills, Pallet loader, CNC handwheel, Control cabinet cooler,, automatic tailstock, automatic central lubrication, Glass scales on the X, Y, Z linear axes, Measuring probe, Hydraulic workpiece clamping, Oil collection tray, 2 loading pallets,, 1 grinding wheel holder., X axis travel: 800 mm, Y axis travel: 270 mm, Z-axis travel: 660 mm, B axis travel: 400 °, Rapid traverse: 30/15/30 m/min, Workpiece mount: ISO 50, Tool holder cone: ISO 50, Grinding spindle drive power: 12 kW, Grinding spindle speed stepless: max. 9000 rpm,, Grinding wheel diameter: max 203mm, Connected load approx.: (400V/50Hz), Dimensions L x W x H: 1900 x 2300 x 2300 mm, Weight approx: 5 ...

Suitable for automatic grinding of the tooth geometry on chip and flank faces (front and back) of HM - tipped circular saw blades. All common tooth shapes can be finish-ground in one cycle (also trapezoidal flat tooth)., Accessories: Total enclosure,, Motorized chip and clearance angle adjustment, Manual central lubrication, Coolant grinding system,, 1 arbor,, 2 magnetic sawblade holders,, 4 centering sleeves,, 1 grinding wheel holder., Circular saw blade diameter: 80-810mm, Circular Saw Bore Diameter: from 10 mm, blade thickness: up to 5 mm, Tooth pitch: 7-100mm, rake angle: - 20° to +40°, clearance angle: 6° to 45°, tooth height difference: any, Bevel cut on the back of the tooth: up to 45 °, Working speed: up to 20 teeth / min., Bevel cut on the tooth face: up to 15°, grinding path max.: 20 mm, Grinding wheel bore diameter: 32 mm, Grinding wheel diameter: 125 mm, Connected load: ...

Suitable for automatic, double-sided grinding of tooth flanks on circular saw blades with carbide tips., Accessories:, Partial enclosure,, 1 sawblade holder,, Coolant system., Circular saw outer diameter: 260 to 2200 mm, Circular saw bore diameter: 25 to 220 mm, sawblade thickness: up to 20 mm, Tooth pitch: from 10 mm, rake angle: any, Radial free angle: up to 6°, Tangential free angle: up to 6°, Grinding path: up to 75 mm, Grinding speed: 0.5 to 6 mm(s), Working speed: up to about 10 teeth/min, Grinding wheel diameter: 125 mm, Grinding wheel bore diameter: 32 mm, Grinding wheel peripheral speed: 26 m/s, Cooling lubricant pump capacity: 250 l/min, Coolant Tank Content: approx. 190 l, Connected load approx.: 6,5 kW (400 V / 50 Hz), Dimensions W x D x H =: 3050 x 1890 x 2050 mm, Weight approx.: 2160 kg, colour: green

A conventional Schaudt external cylindrical grinding machine is available. Center distance: 1000mm, center height: 180mm, max. grinding diameter: 350mm, max. grinding length: 1000mm, plunge grinding length: 100mm, swivel range: 45°, machine dimensions X/Y/Z: approx. 3200mm/1700mm/1700mm, weight: approx. 4500kg. An on-site inspection is possible.

Suitable for the automatic grinding of HM circular saw blades on the face and top in one setting. All known tooth geometries (flat, alternate, trapezoidal teeth, etc.) can be ground automatically and in one pass., Accessories:, Total enclosure,, Coolant system,, Equipment for robot operation with automatic loading door, ND 230 loader, Measuring device for measuring saw blades, Chip breaker grinding attachment, Stepless variable grinding speed of the two grinding spindles from 1600 to 5500 rpm., Grinding speed and grinding path stepless adjustable for each machining surface on the tooth., Automatic central lubrication, Software package for oscillation grinding at rake and clearance angles, Automatic shut-off flap, Automatic fire extinguishing system, Electrostatic oil mist separator N281, Measuring tool, Sawblade holder with guide bushing Ø 16 mm Saw holder >ø180, Sawblade holder with g ...

Suitable for fully automatic grinding or new toothing and chamfering of HSS and segment circular saw blades as well as solid carbide circular saw blades, jig saw blades / thin-cut saws with chip breaker (diameter from 200-500 mm, tooth pitch from 8-30 mm), in plunge grinding using CBN or diamond grinding wheels. Accessories: Machine with total enclosure and integrated machine room lamp,, Loading system including 2 loading mandrels Ø 32 mm,, Oil conversion including aerosol extinguishing generator and oil conversion kit,, Control cabinet cooling unit,, Automatic central lubrication,, Marx VTG 0.32 electrostatic mist extractor,, HSS/HM fine filter system including external filter unit, with integrated 300-liter coolant tank and cooling unit,, Software for all standard curved and pointed teeth,, Signal light to indicate operating status,, Automatic switching of peripheral speed between CBN ...

Roda copa Ø: 175 mm Superfície de fixação da mesa: 150 x 250 mm Grande altura de instalação sem/com placa magnética: 250/150 mm Área de moagem: 100 x 360 ou 150 x 190 mm Velocidade do fuso de moagem: 2800 rpm Motor de tração: 380 V, 1,5 kW Requisito aproximado de espaço: 800 x 600 x 1600 mm Peso aprox.: 200 kg

A complete cut-off grinding system is available. System components: 1) Cut-off grinding machine Harald Baumgarten. 2) Bundle loader Sema Systemtechnik. 3) Bar breaking device. 4) Bar rotating drive and measuring station. 5) Weighing station with section sorting. 6) Extraction and filter system. 7) Soundproof cabin with safety fencing. 8) Four-column press Winter. 9) Hydraulic power unit with pumps. 10) Control cabinet and operator panel. Documentation available. An on-site inspection is possible.

Solver - KS360 - lixadora de fita - Potência do motor: aprox. 1,6 – 2,6 kW - Velocidade da correia: aprox. 7,5 – 34 m/s (dependendo da polia) - Acionamento: Motor elétrico com transmissão por correia - Comprimento da correia de lixamento: 2.500 mm - Largura da correia de lixamento: 5 – 75 mm - Arruelas de contacto: Ø aprox. 100 – 225 mm - Sistema de correias: sistema de 3 rolos Dimensões: LxLxH 0,9x0,7x1,8 metros / Peso 350Kg

Oferta via Gebr. Máquina de Rectificação de Eixo Suhner Rotofera DKM 4 Máquina de Remoção de Eixo Flexível Rotofera de Rectificação de Eixo A caixa de velocidades de 7 velocidades Gama de velocidades: 850, 1600, 2100, 3200, 5700, 8000 e 12000 rpm (400 V, 50 Hz, 3 Ph, 1,0 kW, 16,8 kg)  Utilização contínua - Separação do motor e da ferramenta assegurada Trabalho sem fadiga Áreas de aplicação - Moagem - Separação - Roughing - Moagem - Remoção de ferrugem - Polimento - Pincéis Para trabalhos leves, bem como para os mais pesados, especialmente em aço inoxidável, na construção de caldeiras e aço, em oficinas de polimento, em construção de aparelhos, para cozinhas e materiais hospitalares, etc.

A surface grinding machine is offered. Horizontal grinding spindle, ball-bearing mounted, dual system, hydraulic: infinitely variable table speed, manual: handwheels for individual parts and fine adjustment, flat or V-guides. Inspection possible by appointment.

Ano de fabrico: 2013 Controlador CNC: FAGOR 8055TCO Capacidade Distância entre centros (mm): 3000 Altura entre os centros (mm): 300 Altura entre os centros em relação ao chão (mm): 1200 Diâmetro de moagem (mm): ø 595 Peso máximo da peça entre centros (kg): 2000 Peso máximo da peça com ferramenta (kg): 200 Tabela (eixo Z) Curso máximo (mm): 3350 Placa de mesa rotativa ±5 Taxa de alimentação (mm/min): 0,01 ÷ 6000 Incremento mínimo programável (mm): 0,001 Carro de moagem (eixo X) Curso máximo (mm): 500 Taxa de alimentação (mm/min): 0,01 ÷ 6000 Incremento mínimo programável (mm): 0,001 Resolução (mm): 0,0005 Cabeça de moagem Diâmetro da roda de moagem esquerda (mm): 600 Velocidade periférica (m/s): 45 Cabeça de peça de trabalho Velocidade do fuso (rpm): 9 ÷ 250 Redução do CM: 5 Tipo de fuso: 8 polegadas Contramão Tipo: Volante manu ...

workpiece length: 2700 mmswing dia.: 630 mmclamping length: 2700 mmstroke position adjustment: 40-130 mmgrinding wheel diameter: 1000 mmtotal power requirement: kWweight of the machine ca.: 18,5 tdimensions of the machine ca.: 9x4 mcyclic control CNC / Simatic S7-300steady resthydraulic pre-positioningmanual fine tuning (Vertical u. Horizontal)grinding wheel flangesrough turning fixtureRadial- and side turning fixtures manual Radius turning fixturefiltering system Polo inclined bed filter SB-A0.4manufactured in 2012grinding wheels storage system for 8 grinding wheelsdiverse machine toolssteady rest jawsdiverse irrigation nozzle (workpiece cooling)washer cover with edge lavage Indexierledges for quick workpiece slide position lifting device for grinding wheels manipulationdiverse spare partssliding cover left and rightdiving plate and clampinsertsThe tech. Data are manufacturer or oper ...

This 5-axis Michael Deckel S22 was manufactured in 2005. It features a maximum grinding wheel diameter of 150 mm and a spindle speed range of 300 to 8000 rpm. The machine has a robust weight of 3800 kg and includes a cooling/filtration system from Transor Filter GmbH. If you are looking to get high-quality internal grinding capabilities, consider the Michael Deckel S22 internal grinding machine we have for sale. Contact us for further details.

Controlo Outros Comprimento de moagem [mm] 600 Largura de moagem [mm] 400 Fuso de moagem: Velocidade 1.400 rpm Potência 3,7 kW Dimensões da roda de abasamento (máx.) 300 x 50 x 76,2 mm Mesa de trabalho: Placa de fixação magnética de superfície de fixação, 600 x 400 mm Carga da mesa (máx.) 600 kg Acionamento hidráulico de mesa Curso longitudinal da mesa 200 - 650 mm Travessia rápida 28 m/min Área de moagem 600 x 400 x 375 mm Equipamento/acessórios: Sistema de Medição do Motor do Sistema de Medição em X/Y/Z Braço prismática do sistema de curativo para diamante de einkorn Sistema de refrigeração com filtro de correia de papel, capacidade do depósito 140 l Outros equipamentos Encapsulamento parcial do espaço, luz da área de trabalho

A CNC cylindrical grinding machine Karstens including a coolant system Knoll VRF 150/620 (1997) and an emulsion separator KGH KFM-1200 (2000) is available. Grinding length: 650mm, center height: 190mm, max. grinding diameter: 3800mm, max. workpiece weight between centers/flying: 250kg/100kg, table swivel: +/-12.5°, table feed: 4m/min, machine dimensions X/Y/Z: approx. 3250mm/2150mm/1800mm, weight: approx. 3500kg, control: CNC 20. An inspection on site is possible.

Table dimensions X/Y/Z: approx. 1400mm/800mm, grinding wheel diameter: 150mm, spindle speed: 2000rpm, swivel range: 180°, machine dimensions X/Y/Z: approx. 1600mm/1300mm/1750mm, weight: approx. 400kg. An on-site inspection is possible.

Max. Drilling diameter: 40mm, grinding wheel diameter: 200mm, grinding wheel width: 40mm, speed: 2800rpm, machine dimensions X/Y/Z: approx. 1200mm/850mm/1400mm, weight: approx. 350kg. Including cooling lubricant device and 10x spare grinding wheels. Documentation available. On-site inspection is possible.

The original build year of this machine was 1998. It was overhauled at the end of 2013 by Walter and converted from HMC500 to Fanuc control. In 2014 it was returned to operation. Maintenance was carried out and the associated parts were replaced up until 2024. Protocols/logs are available. The spindle bearings were replaced with high-precision ball bearings 14 days ago. The spindle is now running with 0-1 µm accuracy and is very quiet. Suitable for regrinding and remanufacturing of wood and metal working tools of all kinds. Accessories: FANUC i15 Control Pallet loader cylindrical, Toolstudio Software Standard & Advanced Version 2.1 Toolstudio Software Drills Toolstudio Software Boost Toolstudio Calibration Probe Software package 1 (cylindrical mills) Software package 2 (tapered-spiral end mills) Software package 3 (drill bit and step drill) Software package 16 (warming-up program) Measu ...

The original build year of this machine was 1999. It was overhauled at the end of 2013 by Walter and converted from HMC500 to Fanuc control. In 2014 it was returned to operation. Maintenance was carried out and the associated parts were replaced up until 2024. Protocols/logs are available. Suitable for regrinding and remanufacturing of wood and metal working tools of all kinds. Accessories: FANUC i15 Control Pallet loader cylindrical, Toolstudio Software Standard & Advanced Version 2.1 Toolstudio Software Drills Toolstudio Software Step Tools Toolstudio Software Boost Toolstudio Calibration Probe Software package 1 (cylindrical mills) Software package 2 (tapered-spiral end mills) Software package 3 (drill bit and step drill) Software package 4 (step tools) Software package 6 (woodworking tools) Software package 8 (taps) Software package 16 (warming-up program) Software package 32 (contou ...

1 Máquina cilíndrica CNC de retificação Marca: Buderus Modelo: CNC-335-I-A Ano de Fabricação: 2001 Controlo CNC: Siemens 840C Gama de maquinação do diâmetro: 150 mm Profundidade máxima da peça: 100 mm Maior área externa de processamento: 150 mm Maior diâmetro de oscilação sobre a mesa: 310 mm Velocidades do eixo da peça: 0 – 3000 rpm. Elevações da mesa no eixo X: 1050 mm Eixo Z: 300 mm Velocidade de alimentação infinitamente ajustável: 0,01 - 10 mm/min Dependente do curso: 0,0005 - 0,1 mm Posicionamento do eixo da peça: eixo C Peso aproximado da máquina: 7,5 para.

1 máquina cilíndrica de moagem Marca: Tschudin Modelo: HTG 400 Ano de fabricação: 1967 Largura central: 400 mm Altura da ponta: 100 mm Cone: MK4 Velocidade do fuso: 70 – 500 rpm. Curso máximo da mesa: 420 mm Giro da mesa por 15 Roda de moagem: 300 mm Tacada Retrátil MK3 Fuso de moagem – Diâmetro do disco: 300 mm – Largura do disco: até 50 mm – Diâmetro do disco: 127 mm – Velocidades do disco: 1500 rpm; 1700 rpm; 1900 rpm Peso aproximado: 1,5 toneladas.