retificadoras usadas para venda (2,189)

Faixa de lixamento: 2000x900mm, movimento transversal: 875mm, movimento longitudinal: 2450mm, mesa de distância ao centro do eixo: 845mm, dimensões da placa de fixação magnética: 2000x800mm, carga máxima da mesa: 2.3t, eixo longitudinal da taxa de alimentação: 1000-30. 000mm/min, eixo transversal da alimentação: 0,01-2000mm/min, eixo vertical da alimentação: 0,001-1500mm/min, dimensões da roda de moagem: 500x100x203,2mm, motor do eixo de moagem de potência: 22kW, comprimento: 6800mm, largura: 3450mm, peso: 13t. É possível uma inspeção no local.

Altura central: 175mm, comprimento de moagem: 650mm, eixo B: -15/195, velocidade da peça: 1750rpm, rebolos T1/T2: 500mm/400mm, furo: 203mm, peso máximo da peça: 80kg, cabeça de trabalho: MK4, tailstock: MK3. Dimensões da máquina X/Y/Z: aprox. 3000mm/3000mm/2100mm, peso: aprox. 4000kg, horas de funcionamento: 56300h, controlo: GE Fanuc Series 16i-T. Documentação disponível. É possível uma inspeção no local. Previsão de estar disponível a partir de fevereiro/março de 2025.

Comprimento da lixa: 650mm, diâmetro máximo da lixa: 508mm, altura central: 125mm, velocidade da cabeça de trabalho: 1500rpm, peso máximo da peça: 30kg, faixa de rotação da peça: 30-90, tailstock: MK3. Diâmetro da roda de moagem: 508mm, largura da roda de moagem: 40mm, furo: 203mm, diâmetro máximo de moagem interno: 150mm. Dimensões da máquina X/Y/Z: aprox. 4300mm/3100mm/2200mm, peso: aprox. 4000kg, controle: Siemens Sinumerik 820G. Documentação disponível. É possível uma inspeção no local. Previsão de estar disponível a partir de fevereiro/março de 2025.

Largura de lixamento: 200mm, comprimento de lixamento: 600mm, caminho de ajuste X/Y: 690mm/230mm, distância central do eixo da mesa de fixação: 500mm, diâmetro da roda de lixar: 200mm, largura da roda de lixar: 20mm, furo: 51mm, dimensões da mesa X/Y: 200mm/600mm, carga máxima da mesa: 110kp, dimensões da máquina X/Y/Z: aprox. 3000mm/1600mm/2100mm, peso: aprox. 1300kg. Documentação disponível. É possível uma inspeção no local.

Altura central: 135mm, comprimento máximo de lixamento (eixo): 500mm, diâmetro máximo de lixamento: 270mm, diâmetro da roda de lixar: 400mm, requisito de potência: 7.5kW, dimensões da máquina X/Y/Z: aprox. 2000mm/1300mm/1300mm, peso: aprox. 1700kg.

Uma máquina de moagem de superfície de precisão convencional com controle NC está disponível. Resolução: 0.001mm, curso X/Y/Z: 1200mm/550mm/400mm, dimensões da mesa X/Y: 1600mm/450mm, alimentação de mesa: 30m/min, carga máxima da mesa: 750kg, distância da mesa do fuso: 800mm, alimentação Y: 180mm/min, precisão Y: 0.001mm, alimentação Z: 1200mm/min, precisão Z: 0.3mm, velocidade: 2800rpm, dimensões do rebolo X/Y/Z: 400mm/100mm/127mm. Dimensões da máquina X/Y/Z: aprox. 6500mm/3000mm/2500mm, peso: aprox. 6700kg. Documentação disponível. É possível uma inspeção no local.

Grinding wheel diameter: 220mm, grinding wheel width: 5mm, base body width: 20mm, bore diameter: 52mm. Test piece: diameter: 100mm, width: 300mm, profile height: 35mm. Small workpiece: Outer diameter: 400mm, bore diameter: 205mm, wheel width: 100mm, torque: 20Nm, weight including mandrel: 200kg. Large workpieces: Outer diameter: 700mm, bore diameter: 350mm, disk width: 300mm, torque: 800Nm, weight: 250kg. Accuracy: Repeat accuracy: less than 2µm, axial and radial run-out accuracy (large spindle): less than 2µm at 400mm diameter, axial and radial run-out accuracy (small spindle): less than 2µm at 200mm diameter, parallelism over 300mm between test piece and workpiece axis: less than 2µm. Tool spindle speed: 10000rpm, small workpiece spindle: 23000rpm, large workpiece spindle: 6000rpm, test piece spindle: 1000rpm.

turning speed range - grinding spindle: 4500 U/minmax diameter of the vice bore: 17,5 mmmax. radius to grind: max. 10 mmmax. lateral adjust. of milling cutter: 10 max. longitudinal adjust. of milling cutter: 40 max. angle for relief grinding: 45 Gradweight of the machine ca.: 125 kgOperating instructions availableincluding collet set, grinding wheel flange wrench and the following special accessories:- Aluminium oxide grinding wheel- 3 diamond grinding wheels, different versions- 1 additional grinding wheel holder with diamond grinding wheel- Dressing diamond- Grinding dust coverThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

internal diameter: 20... 400 mmgrinding depth: 315 mminternal grinding spindle rev.-stepless: 2640...16500 U/minwork piece spindle speed: 40400 U/mintable speeds: 0,18 m/minrapid traverse: 10 m/mintable travel: 630 mmtotal power requirement: 16 kWweight of the machine ca.: 5,8 tdimensions of the machine ca.: mgrinding diameter: innen / internal 20..400 mm / external 500 mmmax. diameter of work piece: 500 mmmax. grinding length: 315 mmcone grinding: 60 °power drive of internal grinding motor: 7,5 kWrev’s of internal grinding spindle: 2640...16500 U/minpower drive of face grinding attachment: 4 kWpower drive of workpiece motor: 1,5 kWrev’s of work piece spindle: 40...400 U/minsteplessly variable table traverse speeds: 0,1...8 m / minrapid movement of table: 10 m / minstroke table 630 mmmax. distance between work piece spindle flange and grinding spindle: 1250 mmThe data for this ad w ...

max. grinding diameter: / mmgrinding length: / mmworkpiece length: / mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle bore: 40 mmTools speed: 30...500 U/minoscillation frequency: 5001400 DH/min: 60 kpaccuracy +/-: 0,001 mmtotal power requirement: 6,4 kWweight of the machine ca.: tdimensions of the machine ca.: m- max. diam of work: 350 mm- max. diam for centerless work: 70 … 150 mm- max. worksize: d = 155 mm- work.length: max. 1000 mm- work.length,centerless: 300 mm- hole in spindle: 40 mm- speed of spindle: 30 … 500/ U/min // rpm- oscíllation frequency: 500 .. 1400 DH/min // DS per min- pressure: 60 kp- precision: 0,001 mm- load: 6,4 kW, 380/400~- Spezifikation: Stock finishing tools incl.- high precision surface micro finishing of pistonsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 250 - 1250 mmgrinding wheel diameter: 250 mmtotal power requirement: 3,5 kWweight of the machine ca.: 1,3 tdimensions of the machine ca.: 850 x 1000 x 1800 mmCircular saw blade sharpening machine for sharpening medium to coarse metal saw bladesSaw blade diameter Cold circular saws : 250 - 1250 mmHot circular saws : 900 - 1700 mmTooth pitch up to : 42 mmGrinding wheel double height : 25, 37, 50, 75 and 100Grinding wheel revolutions : 2000 and 2500 rpm Grinding wheel diameter : 250 mmPre-cutting tooth can be chamfered on both sides : up to 45 degreesCutting edge geometry for hot circular saws : = -4 degreesWeight of the machine : 1000 kgexternal dimensions : 850 x 1000 x 1800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Sinumerik voltage: 400 Vweight of the machine ca.: 2,5 tdimensions of the machine ca.: 3500 x 3000 x 2500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 600 mmgrinding width: 400 mmworkpiece height: 450/510 mmgrinding spindle - swivable: 10 °grinding spindle slide: 450 mmhorizontal movement: 320 mmswivability (for helical bores): 1 °surface area: 900 x 300 mmstroke: 50 mmclamping slots: 1 cross travel: 320 mmlongitudinal feed: 600 mmtable load: max 320 kgtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle taper: MK 3 total power requirement: 4 kWweight of the machine ca.: 0,620 tCenter bore grinding machine- 160 x 1000 LO- small/ large drilling/grinding length: 50/ 1000 mm- Spindle holder: MK 3- small/ large workpiece diameter: 6/ 160 mm- Grinding head in spindle hole: 125 mm- Oscillation size: 0 to 5 mm- Oscillation double strokes: 125 / min- Speeds: 55/ 110 rpm- Connected load: 4 kW- Weight: 620 kgspecification: motor. Material rotation oscillation Switch cabinetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 600 mmgrinding width: 320 mmworkpiece height: 525 mmsurface area: 600 x 300 mmmagnetic plate: 600 x 300 mmweight of the machine ca.: 2 tdimensions of the machine ca.: 2600 x 1500 x 2000 mtotal power requirement: kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Especificações: - Dimensões aproximadas da correia de lixamento. 2000 x 150 milímetros - Abertura de moagem superficial aprox. 560 x 150 milímetros - Velocidade aproximada da correia de lixamento. 30 m/seg. - Lavadora de contato B 150 / D 200 mm - Polia de acionamento B 150 / D 200 mm - Acionamento 400 V / 3 kW - Altura de trabalho ajustável -Mot. Extração de poeiras - Necessidade de espaço aprox. L 750 x A 1050 x P 1500 mm - Peso aprox. 120 quilogramas

width of the strips: 75 mmband length: 2000 mmband speed: 30 m/stotal power requirement: 3,0 kWweight of the machine ca.: 70 kgdimensions of the machine ca.: 610 x 944 x 1419 mmMobile belt sander PASOVEC 75 RUNNERPasovec 75 RUNNER - the special belt grinder developed forSurface grinding applications, especially for grinding weld seams in thematerial surface. Pasovec 75 Runner removes unwanted layers that occur whenSheet metal rolling or after sheet metal cutting with plasma oroxygen arise.Innovative, multifunctional machineStepless adjustment of the grinding depthEquipped with a dead mans switchStation for flat grinding small workpiecesLow running costsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

internal diameter: 2 - 40 mmgrinding depth: 70 mmswing diameter: 285 mmtotal power requirement: 5,5 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: mMachine in good working condition, with new e-motor for the working spindle drive.Machine video:https://youtu.be/N95AzX9D_QYMax. Distance chuck flange - wheelhead 390 mmAccessories:Grinding spindle, make PRECISE 20.000 - 66.000 rpm, power 1.3 kWGrinding spindle, make PRECISE 60.000 - 120.000 rpm, power 0.23 kWMagazineMachine documentation.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 330 mmgear width: - mmmax. module: 7 min. module: 0,5 Control: Siemens 840 C total power requirement: 72 kVAweight of the machine ca.: 11,7 tdimensions of the machine ca.: mWe offer a Pfauter model G 320 gear grinding machine for salenumerical control on 8 axes for the machining of gears with straightand helical toothing, with rolled profile for enveloping cuts, the oneWorm profile disc used.Technical specifications:CNC control Siemens 840 CControlled axes:X Radial axisY Tangential ShiftZ Vertical axisA Workhead rotationB Worm rotation during processingC Table rotationU Radial axis dresserV Tangential axis dresserModule 0.5 – 7.0Minimum workpiece diameter 10 mmMaximum workpiece diameter 330 mmNumber of teeth 10 - 600Vertical carriage thrust Z 200 mmHorizontal grinding wheel - carriage stroke X 230 mmTangential slide stroke Y 135 mmAngle of rotation of clamping hea ...

grinding length: 4200 mmgrinding width: 1300 mmworkpiece height: 550 mmControl: SIEMENS 840 D magnetic clamping plate: 4200 x 1300 mmsegment head diameter: 1400 mmgrinding motor turning speeds up to: 320 U/min.grinding motor: 306 kWweight of the machine ca.: 50,0 tdimensions of the machine ca.: mSegment dimensions: 120/106 x 41 x 250 mmNumber of segments: 1 set = 26 piecesGrinding motor feed: 0.5 - 35 m/min, infinitely variableGrinding motor feed:- in steps: 0.002 - 1 mm continuous: up to 5 mm/min. infinitely variableEquipment: CNC-control SIEMENS Sinumerik 840 D Automatic hydr. swivelling of the grinding motor from hollow to cross grinding NC-controlled adjustment of the Marposs measuring head by means of precision support.- new grinding dimensions can be entered into the control, whereby thethe grinding head automatically adjusts to the corresponding height. Dresser with adjustment ax ...

max. wheel diameter: 330 mmgear width: 180 mmmax. module: 7 min. module: 0,5 total power requirement: 12 kWweight of the machine ca.: 7500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 215 mmgear width: 40,65 mmmax. module: total power requirement: 20 kWweight of the machine ca.: 10 tMax. external Ø of workpiece 215 mmTooth profile, height x width 16 x 40.65 mmNo. of teeth 5 - 200Max. tooth ratio 1 : 10Grinding wheel Ø 51 - 190 mmGrinding wheel speeds 1,000 - 6,000 rpmX Axis (horizontal) 152 mmY Axis (vertical) 178 mmZ Axis (slide base plate) 304 mmDistance from middle of machine to middle of workspindle 115 mmAxial speed 125 mm/secWorkpiece speeds 0 - 30 rpmWorkspindle bore, conical 3 29/32 inch Total electrical load 20 kW - 380 V - 50 HzWeight, approx. 10,000 kgAccessories / Special Features FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters. Extensive coolant equipment with filter system, band filter, etc. Driven gri ...

diâmetro máximo da roda de moagem: 800 mmlargura máxima da roda de moagem: 250 mmmesa de moagem: swivable: Gradrequisito de potência total: kWpeso da máquina ca.: tdimensões da máquina ca.: mFinegrinder de dupla face, cômoda, dispositivo de refrigerante, mais antigo M.

diâmetro de moagem máx.: 30 mmlargura da roda reguladora: 12 mmlargura máxima do rebolo: mmrequisito de potência total: kWpeso da máquina ca.: tdimensões da máquina ca.: m

honing diameter: 12 mmstroke: 40 mmthroat: mmtotal power requirement: 15 kWweight of the machine ca.: 5 tdimensions of the machine ca.: m3 spindle honing machine with in process measuringThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece diameter: 240 mmcentre distance: 0 mmhoning length max.: 500 mmmax. module: 5 total power requirement: 12 kWweight of the machine ca.: 5000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

internal diameter: 120 mmgrinding depth: 200 mmswing diameter: mmtotal power requirement: 4 kWweight of the machine ca.: tdimensions of the machine ca.: mGrinding diameter, internal, max., approx. 3 - 120 mmGrinding depth, approx. 200 mmHeight of centres above rotating workpiece slide 132 mmMax. swing Ø in front of rotating workpiece slide, approx. 450 mmWork spindle admission 40 mmTable stroke, max. (Z axis) 480 mmWorkpiece cross adjustment (X axis) 50 mmTurret head cross adjustment (U axis) 50 mmWorkspindle head swivelling (B axis) -30 / +45 ° (manual)Speeds of workspindle, infinitely variable 75 - 1,300 rpmGrinding spindle speeds 9,500 - 150,000 rpmGrinding spindle drive 4 kWTotal electrical load, approx. 8 kW - 380 V - 50 HzWeight, approx. 3,000 kgAccessories / Special Features TRIPET (Bruetsch) CNC Control for 3 axes (Z, X and U) with electric hand wheel, with the usual pr ...

max. wheel diameter: 280 mmgear width: 330 mmmax. module: 5 min. module: 1 Control: LIEBHERR CNC total power requirement: 28 kWweight of the machine ca.: 12 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing diameter: 80 mmstroke: 280 mmthroat: 300 mmtotal power requirement: 6 kWweight of the machine ca.: 2,6 tHoning Ø 10 - 100 mmMax. honing depth, approx. 250 mmMax. spindle stroke 260 mmDistance between spindle and column 300 mmMounting height 1,000 mmTable size 350 x 500 mmHeight of table above floor 500 mmSpindle speeds in 2 steps, infinitely variable, approx. 85 - 300 rpm 170 - 600 rpmStroke speed, infinitely variable, hydraulic 0 - 23 m/minSpindle drive 2 kWTotal electrical load 6 kW - 380 V - 50 HzWeight 2,600 kg Accessories / Special Features Built-on 2-station tilting table which accommodates 2 workpieces. Mechanical workpiece clamping, using a manual lever. Hydraulic infeed of the tool. Switch-off via timer. Air measuring device (probably). Honing oil unit. Various splash shields, etc. Condition : Good. Machine can be inspected under ...