usava AMADA para venda

MARCA: AMADA ANO: 2000 MODELO: LC2415 A3 HORAS DE PRODUÇÃO: 48431 TIPO DE APLICAÇÃO: CORTE A LASER LOCALIZAÇÃO: ALEMANHA TIPO DE MÁQUINA: MÁQUINAS DE CORTE A LASER (CO2) DISPONIBILIDADE: IMEDIATAMENTE Informação Técnica DADOS GERAIS MEDIDAS LARGURA: 3600 MM PROFUNDIDADE DE MEDIÇÃO: 5600 MM ALTURA DAS MEDIDAS: 2100 MM PESO DA MÁQUINA: 6500 KG UNIDADE DE CONTROLO MARCA: FANUC MODELO: FS 160IL Informação Adicional BENEFÍCIOS DA MÁQUINA BENEFÍCIOS TÉCNICOS DA MÁQUINA: - BARREIRA DE REFRIGERAÇÃO-SUCÇÃO-TRANSFORMADOR-LUZ - ÚLTIMA MANUTENÇÃO: 02. 03. 2023

MARCA: AMADA ANO: 1998 MODELO: APX 100 30 HORAS DE PRODUÇÃO: 20365 TIPO DE APLICAÇÃO: FLEXÃO LOCALIZAÇÃO: REPÚBLICA CHECA TIPO DE MÁQUINA: MÁQUINAS DE DOBRAR DISPONIBILIDADE: IMEDIATAMENTE Informação Técnica DADOS GERAIS PESO DA MÁQUINA: 6400 KG UNIDADE DE CONTROLO MARCA: AMADA UNIDADE PRINCIPAL FORÇA DE PRESSÃO: 1000 KN COMPRIMENTO DE FLEXÃO: 3000 MM Informação Adicional BENEFÍCIOS DA MÁQUINA BENEFÍCIOS TÉCNICOS DA MÁQUINA: - MÁX. CURSO 100 MM - POTÊNCIA 10. 5 KW - 7 EIXOS CONTROLADOS (X1, X2, R1, R2, Z1, Z2, Y) - INCL. CONJUNTO BÁSICO DE FERRAMENTAS BENEFÍCIOS QUALITATIVOS DA MÁQUINA: - MUITO BOM ESTADO, REGULARMENTE MANTIDO. - 2021 - NOVA PLACA ELÉTRICA PRINCIPAL

MARCA: AMADA ANO: 2015 MODELO: LCG 3015 HORAS DE PRODUÇÃO: 49748 TIPO DE APLICAÇÃO: CORTE A LASER LOCALIZAÇÃO: REPÚBLICA CHECA TIPO DE MÁQUINA: MÁQUINAS DE CORTE A LASER (CO2) DISPONIBILIDADE: 01 11 2023 Informação Técnica DADOS GERAIS LARGURA DAS MEDIDAS: 9997 MM PROFUNDIDADE DAS MEDIDAS: 2840 MM ALTURA DAS MEDIDAS: 2166 MM PESO DA MÁQUINA: 11200 KG UNIDADE PRINCIPAL POTÊNCIA LASER: 3,5 KW MOVIMENTO MOVIMENTO DO EIXO X: 3070 MM PASSAGEM RÁPIDA DO EIXO X: 170 M/MIN MOVIMENTO DO EIXO Y: 1550 MM PASSAGEM RÁPIDA DO EIXO Y: 170 M/MIN MOVIMENTO DO EIXO Z: 100 MM PEÇA PEÇA X: 3050 MM PEÇA Y: 1525 MM PESO DA PEÇA: 920 KG Informação Adicional BENEFÍCIOS DA MÁQUINA BENEFÍCIOS TÉCNICOS DA MÁQUINA: - ALTURA DE TRABALHO 840 MM - MANJEDOURA DE PALETES

MARCA: AMADA ANO: 1996 MODELO: ITPS2 50-12 HORAS DE PRODUÇÃO: 68162 TIPO DE APLICAÇÃO: FLEXÃO LOCALIZAÇÃO: POLÓNIA TIPO DE MÁQUINA: MÁQUINAS DE DOBRAR DISPONIBILIDADE: IMEDIATAMENTE Informação Técnica DADOS GERAIS LARGURA DAS MEDIÇÕES: 2200 MM PROFUNDIDADE DAS MEDIDAS: 2500 MM ALTURA DAS MEDIDAS: 2100 MM PESO DA MÁQUINA: 2610 KG UNIDADE DE CONTROLO MARCA: AMADA MODELO: OPERAUR OP2 UNIDADE PRINCIPAL FORÇA DE PRESSÃO: 500 KN COMPRIMENTO DE FLEXÃO: 1200 MM NÚMERO DE EIXO: 4 MEDIA LIGAÇÃO ELECTRÓNICA PRINCIPAL: 400V / 50HZ Informação Adicional BENEFÍCIOS DA MÁQUINA BENEFÍCIOS TÉCNICOS DA MÁQUINA: - (Y, X, R1, R2) - GARGANTA: 400 MM - CURSO MÁXIMO: 100 MM BENEFÍCIOS QUALITATIVOS DA MÁQUINA: - A MÁQUINA EM FUNCIONAMENTO CONTÍNUO, PRONTA PARA OS TESTES.

Força de imprensa: 100T Comprimento de flexão: 3100 mm Curso: 200 mm 4 eixo Peso:6750 kg

Travão de imprensa / Travão de imprensa AMADA HFE M2 1003 Comprimento de dobragem 3100mm Pressão / Druk 100 toneladas Eixo CNC 4 / CNC 4 eixos Ano de manuf. / Ano de construção 2012.10 Condição / Condição: muito bom, pronto para funcionar / muito bom, pronto para uso imediato Ferramentas de flexão não incluídas / sem ferramentas de flexão

Punching capacity: 300kN, max. sheet dimensions: 1270x3660x6,4mm, max. table load: 100kg, connected load: 35kVA, length: 3778mm, width: 4601mm, height: 2245mm, weight: 13.5t.

X-travel: 2520mm, y-travel: 1550mm, z-travel: 300mm, max. sheet thickness: 12mm, max. workpiece weight: 330kg, cutting speed: 0-20m/min, controls: AMNC-F, connected load: 70kVA, weight: 7.5t, operating hours: 23,600h, with Resonator Fanuc AF 2000 E (LU 2.5), laser power: 2500W, laser wavelength: 10.6μm, with adaptive optics (Active Cut), sensor cutting head HS-2003, high-pressure cutting device (Clean Cut), aluminium cutting device (Alu Cut), focus point adjustment, gas pressure adjustment, resetting device, parts flap, extraction system, cooling unit, beam path rinsing and diode laser for positioning.

X-axis: 2520mm, y-axis: 1550mm, z-axis: 300mm, max. sheet thickness: 12mm, control FANUC 160i-L, FANUC Laser C4000, Keller dry separator Vario T 1.5, cooling Riedel. The machine is fully functional and can be inspected on site during operation.

Max. cutting diameter: 250mm.

Working hours machine: 19744 (17.01.2024) h Working hours laser on: 9440 (17.01.2024) h Working hours beam on: 6018 (17.01.2024) h Laser power: 6000 Watt Control: AMNC 3i Working range laser: 3070 x 1550 x 100 mm Max. steel: 25 mm Max. stainless steel: 25 mm Max. aluminium: 25 mm Max. copper: 15 mm Max. brass: 12 mm Length: 10136 mm Width: 2840 mm Height: 2432 mm Machine weight: 9500 kg

Working hours machine: 31888 (17.01.2024) h Working hours laser on: 19090 (17.01.2024) h Working hours beam on: 6475 (17.01.2024) h Laser power: 4000 Watt Max. punching force: 300 kN Control: AMNC 3i Working range laser: 2500 x 1170 mm Working range punching: 3050 x 1525 mm Length: 7870 mm Width: 5880 mm Height: 2666 mm Electrical connected load: 85 kVA x-axis: 100 m / min y-axis: 80 m / min Weight of machine approx.: 30000 kg

Working hours machine: 36101 h Max. punching force: 200 kN Working range punching: 2000 (4000) x 1270 mm Control: Fanuc 18-P Length: 6190 mm Width: 5000 mm Height: 2450 mm Machine weight: 12000 kg

Folding length : 2000 mm 50 Ton Machine is in good condition

Amada LC 3015 X1 NT Laser Cutting Machine with automatic pallet changer CNC Control Unit : LC20BP2 Working area : 3000X1500X120 Power : 4000 WATT Maximum working weight : 750 KG Automatic pallet changer Dust collecting device is not included!

Amada HF 50-12T Press brake cnc/nc Amada HF 50-12T 2005r HF 50-12T

Hydraulic press brake: AMADA type HF 50-12, rb: 2002, a very durable model from the best manufacturer of this type of machine. Bending length: 1250 mm; Between columns: 1050 mm, Loading: 200 mm, stroke: 180 mm; Pressure: 50 t. CNC Operateur OPEII controlled press, graphics, Polish language, TFT 14 color screen. Axes controlled -Y1-Y2-X-R1-R2 + automatic compensation of table bending . Weight of the machine 3.1 t. 6 kW drives. Fiessler laser protection of the workspace. Tools - complete, segmented tools of Amada standard. Fast machine for making a large number of parts. Full original DTR, instructions for the machine and control in Polish, a workstation manual BiHP in Polish.

20 Ton 2500 mm x 1250 mm Machine is full revised Metalix Cam program Machine is in good condition

Hydraulic press brake: AMADA type HFB-O 2206, rb: 2000, a very durable model from the best manufacturer of this type of machines Operateur OPE II control - 8 controlled axes, visualization, Polish language Tools - a set of new tools - 4-slot die + punch, new adapters with clamps, Amada standard segment tools.

Pega 244 punching machine year 1987 still in production well maintained complete with automatic loading and unloading mod. MP1020

Hydraulic press brake: AMADA type HFP 1000-30 Network Technology, rb: 2005, top model of the best manufacturer of this type of machine. Dual speed X,R and Z axis. Opening of 550 mm. Long stroke increased to 350 mm Bending length: 3100 mm; Between columns: 2650 mm; Loading: 350 mm; Pressure: 100 t CNC controlled press Amada AMNC PC, 3D graphics, Polish language, TFT screen 15 color. Axes controlled -Y1-Y2-X1-X2-R1-R2-Z1-Z2 + automatic compensation of table bending . Weight of the machine 7.5 t. 9 kW drives. Fiessler lasers. Machine complies with the CE Machinery Directive. Tools - complete, segmented tools. Full original DTR, instructions for the machine and control in Polish, health and safety manual in Polish.

BREAKING FORCE: 196 KN MAX SHEET THICKNESS: 3 MM X-AXIS MOVEMENT: 2500 MM Y AXIS MOVEMENT: 1270 MM NUMBER OF INDICATORS: 2 NUMBER OF POSITIONS: 31 STEEL: 3 MM STAINLESS STEEL: 2 MM ALUMINUM: 2 MM MAIN ELECTRICAL CONNECTION: 400V USED POWER: 24 KVA WIDTH MEASUREMENTS: 5330 MM DEPTH MEASUREMENTS: 5123 MM HEIGHT MEASUREMENTS: 2160 WEIGHT OF THE MACHINE: 11000 KG A copy of the software.

1.AMADA laser cutter FLC-3015 AJ with automatic material feeding and removal Shift type (X and Y axes) movable optics The type of control of the X, Y, Z axes as well as the B and CF axes at the same time Punching range X axis 3070 mm Y axis 1,550 mm Z axis 100 mm Punching speed X and Y axis 0 - 120 m / min The maximum weight of the material is 920 kg Drive type (X, Y, Z axes) Linear drive Table height 940 mm Machine dimensions (machine only) L x W x H 6043 x 2900 x 2350 mm Net weight 11,200 kg Year of production 2013 2.Laser resonator Model - AJ2000 Rated power 2000 W Resonator dimensions L x W x H 1760 x 1210 x 1530 mm Weight 800 kg 3.Herding DELTAComp 1500-8 / 9 SB 7.5 kW filter Weight 1200 kg 4.LKI MP Flexit 7 kW feeder Weight 4300 kg The number of electrified operating hours is 46,000 The number of working hours of the head operation  ...

AMADA EUROPE 245 turret press Technical data : - CNC control: FANUC 18 i-P - pressure: 20 Tons - max. 31 station non-recapture punching format: 1020 x 1290 (Y-10; Y1010 T2XX; Y-50; Y970 T3XX) - max. size of the cut sheet with interception: 1020 x 2540 mm - max. size of the cut sheet with interception + 1 turn (optional): 1500 x 2540 mm - max. sheet thickness on the ball table: 6 mm - max. sheet thickness on the brush table: 3 mm - max. permissible weight on the table: 100 kg - punching accuracy: +-0.1 mm - positioning accuracy: +-0.07 mm - number of clamps/pneumatic holders: 2 - number of axes controlled simultaneously: 3: X, Y, C - revolver speed: 25 rpm. - number of strokes per minute, distance 25.4 mm, cylinder stroke 6.5 mm: 220 strokes / min. - stroke punching, distance 1 mm, cylinder stroke 6.5 mm: 480 strokes / min. - minimum programmable increment: 0.001 mm - nu ...

Hydraulic guillotine - AMADA type GPX 630. Cutting length: 3100 mm x 6 mm, full CNC control. Variable angle of the knife and the gap between the knives, set by the computer after feeding the gr. and length of material. Sheet metal cutting in the range of 0.4 - 6 mm. CNC bumper departure 10 -1050 mm, retraction, programs. Machine with automatic support for long sheets of cut sheet metal at the back. Raised rear bumper. Machine weight 6.5 t. 2 supports and an angle bar at the front of the machine. The only guillotine on the market up to 6 mm, with such a low demand for electricity, the main motor only - 5.5 kW. Full original DTR in English and Polish, OHS manual in Polish. The machine is little used, the cutting knives are 95% sharp.

Hydraulic press brake: Amada type HFT 170-4, rb: 2002. Bending length: 4100 mm; Between columns: 3550 mm; Loading : 350 mm; Pressure: 170 t Stroke : 200 mm. AbPad CNC controlled press, LANGUAGE. POLISH, color, control new replaced at Amada in 2021. Protection of the workspace with Lasersafe lasers. Machine under current 20996 hrs. Axes controlled -Y1-Y2-X1-X2-R + automatic compensation of table bending. Machine weight 14.5 t. Drives 16.5 kW; Tools - Amady standard, complete,sectional . Full original DTR, BiHP stand instructions in Polish.

Hydraulic press brake: AMADA type HFBO 50-20, rb: 1999, a very durable model of the best manufacturer of this type of machine. Bending length: 2050 mm; Between columns: 1650 mm; Loading: 300 mm, stroke: 200 mm; Pressure: 50 t. CNC Operateur OPEII controlled press, graphics, Polish language, TFT 14 color screen. Axes controlled -Y1-Y2-X1-X2-R1-R2-Z1-Z2 + automatic compensation of table bending . Weight of the machine 5.5 t. 6 kW drives. Fiessler laser protection of the workspace. Tools - complete, segmented tools of Amada standard. Full original DTR, instructions for the machine and control in Polish, a workstation manual BiHP in Polish.

Used Amada Vipros 255 CNC punching machine Year 1998 Complete with Lki 250 load unloader Machine still in production Well maintained

-resonator power:4 kW -machining range:3000x1500 mm -Z axis range:100 mm -maximum cutting thickness black steel:20 mm -maximum cutting thickness stainless steel:12 mm -maximum cutting thickness aluminum: 10 mm -maximum load on the table:920 kg -machine weight:11000 kg -automatic storage

Amada HFE 8025 Built in 2007 Machine hours: about 17,500 hours Description: - Pressing force 800 kN -Bending length 2500 mm -Control AMADA OP 2000 -System of a backgauge with 5 steered axles -Safety device type AKAS Specifications: -Maximum press force 800 kN -Length of a pressure beam 2570 mm - Clearance between posts 2125 mm -Projection 420 mm - Stroke 200 mm -Installation height 470 mm -Work table width 60 mm -Table height 960 mm -Delivery speed 1-100 mm / s -Working speed 1-10 mm / s - Retract speed 1-100 mm / s -Oil volume 90 l -Electrical connection 400 V / 50 Hz / 9 kW Dimensions: Overall length 3800 mm Overall width 2450 mm Overall height 2600 mm Total weight 5750 kg

Hydraulic guillotine - AMADA type GPN 630. Cutting length: 3100 mm x 6 mm, Variable knife angle and knife gap. Cutting sheet metal in the range of 0.4 - 6 mm. CNC stop, departure 10 -1050 mm, retraction, programs. Machine with automatic support of long sheets of cut sheet metal at the back. Liftable rear bumper. Machine weight 6 tons. 2 supports and an angle bracket at the front of the machine. The only guillotine on the market up to 6 mm, with such a low demand for electricity, main engine only - 5.5 kW. Full original Operation and Maintenance Manual in English and Polish, BiHP position manual in Polish. The machine is hardly used, cutting knives are 95% sharp.

Hydraulic press brake: AMADA type ITPS 100-3. Bending length: 3100 mm; Between columns: 2650 mm, Loading: 350 mm, stroke 105 mm; Pressure: 100 t CNC Ema press, graphics. Controlled axes -Y-X1-X2-R1-R2 + automatic compensation of table bend. Quick-change Amada-type punch holder. Machine weight 7 t. Drives 9 kW. Tools - complete set, Amada standard sectioning tools - 2 SLOT V16 and 24 mm die + Amada Amanit Punch. Full original DTR, workplace health and safety instruction in Polish.

Hydraulic press brake: AMADA type ITS2 25-12, rb: 1996, very durable model from the best manufacturer of this type of machines Bending length: 1250 mm; Between columns: 1050 mm, Loading: 200 mm, stroke 180 mm; Pressure: 25 t. CNC-controlled Operateur OPEII press, graphics, Polish language, 14 color TFT screen. Controlled axes -Y-X-R1-R2 + automatic table bending compensation. Machine weight 2.3 tons. Drives 4.5 kW. Tools - set, Amada standard segment tools. A fast machine for making large numbers of details. Full original operation and maintenance manual, instructions for the machine and control in English. Polish, BiHP job manual in Polish.

Synchronized electronic press brake Amada HFE M2 220/4 L Numerical control 8 axes with 2 sheet metal attendants 75 kg each managed by CNC

AMADA, model HFT 220-3 (220 tons, 3340 mm bending length). Machine from 2003, purchased in 2004, very good condition for the year, serviced, has its power, no leaks. The machine has, among others: - Laser Safe operator safety system - modified hydraulic control to digital - new hydraulic oil and filters - 4 movable bumper fingers in the Z axis (rare configuration) - controlled CNC axes: Y1, Y2, X, R - instruction manual in Polish - lighting of the working field with LED lamps (front and center) - 230 V AC sockets at the back of the machine (2 pcs.) - serviced control box - replaced computer and PLC cooling - a set of tools visible in the picture sheet 6-8 mm few hours Accessories included (4 x 835 mm tool kit, front rests, clamps).

Force 170 T Bending length 3000 mm Distance between posts 2700 mm CNC AMNC Throat 420 mm Vertical stroke 350 mm Engine power 16.5 kW Length x width x height 4533.0 × 2650.0 × 3140.0 Weight 12750 kg

The machine is in good technical condition. Upon prior arrangement, inspection is possible, the machine is dismantled and ready for shipment.

Bending length: 1250 mm; Between columns: 1050 mm, Loading: 200 mm, stroke 105 mm; Pressure: 25 t. CNC-controlled MB press, color. Controlled axes -YX Machine weight 1.2 tons. Drives 4 kW. Tools - set, Amada standard segment tools. A fast machine for making large numbers of details.

Hydraulic press brake: AMADA type ITS 80-25, rb: 1990, very durable model from the best manufacturer of this type of machines. Bending length: 2550 mm; Between columns: 2050 mm Loading: 300 mm, stroke 105 mm; Pressure: 80 t Cybelec DNC70PS CNC-controlled press, Polish language. Controlled axes -Y-X, automatic table bending compensation. Machine weight 4.5 tons. Drives 6 kW. Tools - set, Amada standard. Full Operation and Maintenance Manual, BiHP position manual in Polish.

Hydraulic press brake: AMADA type HFBO 170-4100, rb: 2000, a very durable model from the best manufacturer of this type of machines. Bending length: 4100 mm; Between columns: 3650 mm, Loading: 300 mm, stroke 200 mm; Pressure: 170 t. CNC-controlled press Operateur OPEII, graphics, Polish language, 14 color TFT screen. Controlled axes -Y1-Y2-X1-X2-R1-R2-Z1-Z2 + automatic table bending compensation. Machine weight 13.8 tons. Drives 13 kW. Tools - set, Amada standard segment tools - brand new. Full original operation and maintenance manual, instructions for the machine and control in English. Polish, BiHP job manual in Polish.

Cutting length: 3100 mm x 6 mm, full CNC control. Variable knife angle and knife gap, set by the computer after entering the gr. and length of the material. Cutting sheet metal in the range of 0.4 - 6 mm. CNC stop, departure 10 -1050 mm, retraction, programs. Machine with automatic support of long sheets of cut sheet metal at the back. Liftable rear bumper. Machine weight 6.5 tons. 2 supports and an angle bracket at the front of the machine. The only guillotine on the market up to 6 mm, with such a low demand for electricity, main engine only - 5.5 kW. Full original Operation and Maintenance Manual in English and Polish, BiHP position manual in Polish. The machine is hardly used, cutting knives are 95% sharp.

Hydraulic press brake: AMADA type HFBO 80-2550, rb: 2012, the latest model of the best manufacturer of this type of machines. Bending length: 2550 mm; Between columns: 2050 mm, Loading: 300 mm, stroke 200 mm; Pressure: 80 t. CNC-controlled ABPad press, graphics, Polish language, 14 color TFT screen. Controlled axes -Y1-Y2-X1-X2-R1-R2-Z1-Z2 + automatic table bending compensation. Machine weight 5.8 tons. Drives 9 kW. Tools - set, Amada standard segment tools. Symbolic number of hours worked. Machine condition - like new. Full original operation and maintenance manual, instructions for the machine and control in English. Polish, BiHP job manual in Polish.

-power: 2kW -Laser type: CO2 -working range: 1250x1250 with a capture at 2.5 m - Z axis range: 300 mm -Maximum cutting thickness black steel: 10 mm -Maximum cutting thickness of stainless steel: 6 mm -Maximum cutting thickness of aluminum: 4 mm - cutting hours: 13132 H

Hydraulic press brake: AMADA type HFT 170-3, rb: 2003 Bending length: 3100 mm; Between columns: 2650 mm 200 mm stroke; Pressure: 170 t CNC controlled press CD2000, color, language. Polish. Controlled axes -Y1-Y2-X1-X2 + automatic table bend compensation. Machine weight 11.6 t. Drives 16.5 kW. Tools - Brand new Amady standard tools - 4 SLOT + PUNCH. Upstream - 18,000 rh. Full original DTR, workplace health and safety instruction in Polish.

Sheet size : 1250x2500 Fanuc control unit Machine is in good condition

Amada HFT 130-3L Press brake cnc/nc Amada HFT 130-3L 2007r 2007

Amada Europe 255 CNC Punch Press Machine is in good working condition Number of station: 27 3 index(2 piece b, 1 piece c) Fanuc control unit Sheet metal size: 2500x1290

Capacity 30 tons (294kN) X axis 2000mm / Y axis 1270mm Maximum sheet thickness 6.35mm normal steel Maximum plate 1525 x 4000mm 45 stations: 24 x A (Max. Dia. 12.7mm) 12 x W (Max. Dia. 31.7mm) 2 x C (Max. Dia. 50.8mm) 1 x D (Max. Dia. 88.9mm) 2 x E (Max. Dia. 114.3mm) Auto Indexing: 2 x W (Max Dia 31.7mm) 2 x C (Max. Dia. 50.8mm)

Capacity 6100 x 220 tons Y1, Y2, X1, X2, R1, R2, Z1 and Z2 CNC controlled Amada quick change system