usava AWI para venda

cutting width: max. 330 mm Cutting height: max. 150 mm Saw blade diameter: 550 mm Motor output: 7,5 kW turning speeds: 2800 U/min Required air-pressure: 6-8 bar work height max.: 900 +- 20 mm Dimensions (L/W/H): 530x869x1217 mm SALVAMAC Legend 550 the semi-automatic chop saw -------------------------------------------------- - Maximum cutting area 220x150/330x50 mm (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Engine power of the saw motor 7.5 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system to mini ...

cutting width: max. 610 mm Cutting height: max. 150 mm Saw blade diameter: 600 mm Motor output: 9,2 kW turning speeds: 2750 U/min Required air-pressure: 7 bar work height max.: 900 +- 20 mm Dimensions (L/W/H): 770x1385x1370 mm SALVAMAC Legend 600 the semi-automatic chop saw -------------------------------------------------- - Maximum cutting area 420x150/520x100/610x30 mm (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Engine power of the saw motor 9.2 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system  ...

cutting width: max. 375 mm Cutting height: max. 125 mm Saw blade diameter: 500 mm Motor output: 5,5 kW turning speeds: 2800 U/min Required air-pressure: 6-8 bar Dimensions (L/W/H): 530x869x1217 mm SALVAMAC Legend 500 fast semi-automatic chop saw -------------------------------------------------- - Maximum cutting area Option A: 220x125/310x50mm Option B: 350x80/375x50mm (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Engine power of the saw motor 5.5 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system to ...

Sistema: 68/78 IV Número de ferramentas: - St.Bore : 50 mm Ferramentas para janelas Oertli IV 68/78 madeira IV 68/78 madeira-alumínio foram utilizadas no Weinig Unicontrol 6 com fusos CNC Você está convidado a receber as seções completas da janela e desenhos de ferramentas Inquérito

Number of motors: 2 Stück 0: 2380 mm Control: , 0 RUCHSER RU-GL-45° ----------------------------------------------------- Glazing bead saw at the sliding work table Developed for cutting glazing beads in pairs on the sliding work table The RU-GL glazing bead saw is mounted on a sliding work table with Scanning and clamping device for two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw stuck right saw on carriage mounted to be moved manually. Pneumatic clamping device from above and from the side, safety two-hand operation. Saw motors 0.37 kW, voltage 400V. Sliding work table with felt pad, length with side shelf 3300 mm, Width 1400 mm, working height 800 - 1000 mm. Pneumatically lowerable Counter bearing for positioning the wings. Pos. 1: RU-GL double glass bead saw 45° on the RU-SA-3000 ----------------------------------------------------- for glazing beads up to 30 ...

Number of motors: 2 Stück 0: 2650 mm Control: , 0 Ruchser RU-GLS-ED 45° glass bead saw -------------------------------------- Developed for cutting glazing beads in pairs The RU-GLS-ED45° double glazing bead saw must be adjusted to size manually. the Machine was designed for cutting glazing beads in pairs with a cutting angle of 45° and features a fixed and a movable saw unit. The manual length adjustment is equipped with an electrical digital display. It can cut lengths from 240mm - 2650mm be sawn. During the cutting process, the glazing beads with a pneumatic clamping device clamped from above and from the front to prevent tilting to prevent the glazing beads. Operation is via a safety two-hand operation Item 1: RU-GLS-ED45° double glazing bead saw ----------------------------------------------------- with manual measurement, for the pairwise Cutting glazing beads, cutting angle  ...

Tenoning spindle: 2 St. Number of milling agregates: 7 St. Spindle diameter: 50 mm Control: CNC, Weinig PC-Nexus Weinig Uncontrol 12 with radial and axial CNC spindles and VARIO table .. The machine has already been professionally dismantled and stored in 73447 Oberkochen Specifications summary (please inquire about any additional accessories included) .. crosscut saw .. > Crosscut saw electronically, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 3000-6000 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser guide light for detecting the sawing section > Axial adjustment path 150 mm NC axis, electronically stepless > Adjustment path, radial, pneumatic, 8 positions, e.g. for edge rounding from above rounding aggregate .. > Position: horizontally below > Axial adjustment path together with the crosscut saw. electronic len ...

engine output: 5 kW saw-blade dia.: 300-350 mm Working speed: 0-40 m/min weight: ca. 1550 kg kg Concept 350 PLUS Partnership Edition pressure beam saw Cutting length: 3.200 mm ------------------------------------------------ combines the advantages of different sawing systems. Flexible as one Panel saw, precise and safe like a pressure beam saw and ergonomic like a rip saw ------------------------------------------------ Manufacturer description: - Saw unit can be swiveled up to 46° - Pressure bar, including LED lighting with 3 different action colors: WHITE: Machines in rest position RED: Pressure bar lowers or emergency stop function BLUE: Sawing unit moves - variably usable support table 1,000 x 500 mm - Scoring system using the main saw blade in synchronization - Automatic workpiece length detection for minimal travel distances - Mobile and height-adjustable control panel, including ...

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. control: CNC Weinig Powermat 500 for window production ----------------------------------------------- The machine is currently being completely checked in our warehouse Short summary: ----------------------------------------------- 6 spindles with 8,000 rpm and 7.5 KW including 6 x HSK/Powerlock Window package with glazing bead removal Spindles axially and radially CNC controlled right and upper spindles with common pneumatic timing for Glazing bead removal Large Powercom control with touchscreen Detailed description: ----------------------------------------------- Tool arrangement No. 018 for window production Technical data: ----------------------------------------------- Working width 20 - 230 mm (with tool flight circle 93 - 125 mm) Wor ...

cutting width: max. 250 mm Cutting height: max. 80 mm Saw blade diameter: 400 mm Motor output: 3,0 kW turning speeds: 2800 U/min Required air-pressure: 6-8 bar work height max.: 900 +-20 mm mm Dimensions (L/W/H): 530x869x1217 mm SALVAMAC Legend 400 – The semi-automatic chop saw -------------------------------------------------- - Maximum cutting area: 220x80/ 250x50 mm. (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Motor power of the saw motor 3.0 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system t ...

Number of motors: 2 Stück 0: 3000 mm Control: ja/CNC loading dimensions L x W x H: 4000 x 1500 x 1500 mm Weight: 800 kg HECHT double miter saw Exenso DS350E - 3000 mm ----------------------------------------------------- For wooden glazing beads, sash bars, profile strips, aluminum strips, etc. Pos. 1.1 article number 942.5103 HECHT Exenso DS350E - Working length 3000 mm - Pivoting range 22.5° (inside) to 135° (outside) - right head moveable - Saw blade holder Ø 350 mm - incl. 1 pc center support. - Pneumatic clamping of the aggregates. - Positioning control Exenso DS3 with touch panel 15 display in the dust-proof monitor housing. - 3-axis control, 1 longitudinal axis and 2 swivel axes. - Input of the cutting data by hand - Processing data from a cutting list (data set by default) - Processing of measuring rod data (radio caliper GMF) - Ethernet port 10/100 (TCP/IP) - USB interface - ...

groove width: 70 mm drawing length: 300 mm working speed: 0-25 m/min Control: SIEMENS OP 17 workpiece weight: 25.000 kg return speed: 40 m/min dimensions of the machine ca.: 1,2x2,3x1,65 m drawing capacity: 21.000 N total power requirement: 5 kW Machine does not need a foundation, accessories Products / Grooving machines - Polymat 25/32/70/100/125 CNC The machine series for medium and large quantities with great flexibility and many options. The universally applicable machines in the CNC series are used for the production of production of standard grooves as well as for the machining of special grooves. special grooves. The up to four controlled axes allow the production of workpieces with with helical grooves, grooves in blind holes and other special applications. CNC control, SIEMENS OP 17, innovative, because: 4-axis -> expandable Program memory Axis interpolation worldwide service mu ...

largura da ranhura: 50 mm comprimento de desenho: 320 mm velocidade de trabalho: 4 m/min requisito de potência total: 5 kW peso da máquina ca.: 3 t dimensões da máquina ca.: 0,8x0,8x1,8 m Stuhlmann cunha vertical grooving machine 320-S Largura da ranhura: 50 mm comprimento de desenho: 320 mm Velocidade de trabalho: 4 m /min capacidade de pressão: 3 t Comprimento de trabalho: 320 mm Largura de trabalho: 30 mm Capacidade: 3

Clampable cutter head type (max.): 460 mm Cutter head weight (max.): 150 kg Mounting disc diameter for cutter heads (Ø): 360 mm Mounting cone for cutter heads Nominal diameter: Ø 58,227 mm travel -z axis: 200 mm diagram-drawing enlargement: ±10 - ± 500 µm weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC- ...

cutting diameter: 350 mm saw band length: 4160 x 34 x 1,1 mm cutting width: 350 mm cutting capacity - flat: 400 x350 / 90° mm cutting capacity - flat: 290 x 300 / 45° mm cutting capacity - flat: 400 x 350 / 30° mm cutting capacity - round: 350 / 90° mm cutting capacity - round: 320 / 30° mm cutting capacity - round: 320 / 45° mm feeds - fine adjustment: 20-100 mm hydraulic motor: 0,37 kW coolant pump AC: 0,12 kW drive motor: 2,2 kW total power requirement: 2,7 kW weight of the machine ca.: 1,05 t dimensions of the machine ca.: 2100 x 1300 x 850 m Accessories : automatic sawing functions, hydraulic clamping, material feed via driven rollers, pneum. adjustable lowering speed, sawing programs adjustable via touch screen, EU quality and CE standards, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 320 mm saw band length: 3960 x 27 x 0,9 mm cutting width: 320 mm cutting capacity - flat: 440 x 220 / 90° mm cutting capacity - round: 320 / 90° mm cutting capacity - square: 320 / 90° mm cutting capacity - flat: 280 x 260 / 45° mm cutting capacity - round: 280 / 45° mm cutting capacity - square: 26 / 45° mm speed: 20 - 100 m/min sawing motor: 1,5 kW hydraulic motor: 0,37 kW coolant pump: 0,12 kW total power requirement: 2,0 kW weight of the machine ca.: 750 kg dimensions of the machine ca.: 2100 x 1300 x 850 mm Features: • Inverter for adjustable speed • hydraulic lifting of the saw arm • automatic stop after sawing operation • manual saw blade tension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 320 mm saw band length: 3660x27x0,9 mm cutting width: 400 mm cutting capacity - flat: 400 x 220 / 90° mm cutting capacity - round: 320 /90° mm speed: 20 - 100 m/min cutting capacity - flat: 280 x 200 / 45° mm cutting capacity - round: 280 / 45° mm sawing motor: 1,5 kW hydraulic motor: 0,37 kW coolant pump: 0,12 kW total power requirement: 2 kW weight of the machine ca.: 670 kg dimensions of the machine ca.: 1800 x 850 x 1200 mm Accessories: • Inverter • hydraulical vice • automatical movement to the top via hydraulical cylinder. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 360 mm saw band length: 5000 x 34 x 1,1 mm cutting width: 640 mm cutting capacity - flat: 510 x 360 / 30° mm cutting capacity - round: 360 / 30° mm cutting capacity - square: 360 x 360 / 30° mm cutting capacity - flat: 390 x 360 /45° mm cutting capacity - round: 310 /45° mm cutting capacity - square: 360 x 360 / 45° mm cutting capacity - flat: 250 x 360 /60° mm cutting capacity - round: 310 / 60° mm cutting capacity - square: 270 x 270 / 60° mm cutting capacity - flat: 640 x 360 / 90° mm cutting capacity - round: 360 / 90° mm cutting capacity - square: 360 x 360 / 90° mm speed: 20 - 100 m/min sawing motor: 3 kW hydraulic motor: 1,1 kW coolant pump: 0,12 kW voltage: 400 V / 50 Hz total power requirement: 4,3 kW weight of the machine ca.: 1630 kg dimensions of the machine ca.: 3000 x 1200 x 2000 mm Accessories: • Inverter • hydraulical vice • automatical ...

cutting diameter: 380 mm saw band length: 5000x34x1,1 mm cutting width: 520 mm cutting capacity - flat: 520 x 350 / 90° mm cutting capacity - round: 380 /90° mm speed: 20 - 85 m/min sawing motor: 2,2 kW total power requirement: 3,1 kW weight of the machine ca.: 1200 kg dimensions of the machine ca.: 1800 x 850 x 1200 mm Accessories: • Inverter • hydraulical vice • automatical movement to the top via hydraulical cylinder. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 325 mm saw band length: 4380x34x1,1 mm cutting width: 450 mm cutting capacity - flat: 450 x 325 / 90° mm cutting capacity - round: 325 /90° mm speed: 20 - 100 m/min sawing motor: 2,2 kW total power requirement: 3 kW weight of the machine ca.: 1010 kg dimensions of the machine ca.: 2100 x 860 x 1500 mm Accessories: • Inverter • hydraulical vice • automatical movement to the top via hydraulical cylinder. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 230 mm saw band length: 2730 x 27 mm cutting width: 0,9 mm capacity 90 degrees: flat: 320 x 130 mm capacity 45 degrees: round: 180 mm capacity 45 degrees: flat: 230 x 100 mm cutting speed: 35 - 70 m/min cutting angle: + - 45 ° hydraulic motor: 0,37 kW coolant pump: 0,12 kW sawing motor: 1,5 kW total power requirement: 2 kW weight of the machine ca.: 440 kg dimensions of the machine ca.: 1,4 x 0,9 x 1,3 m Setting of the saw pressure by hydr. cylinder Cooling device, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 360 mm saw band length: 5200 x 34 x 1,1 mm cutting width: 700 mm cutting capacity - flat: 590 x 360 /30° mm cutting capacity - round: 360 / 30° mm cutting capacity - square: 360 x 360 / 30° mm cutting capacity - flat: 460 x 360 /45° mm cutting capacity - round: 360 /45° mm cutting capacity - square: 360 x 360 / 45° mm cutting capacity - flat: 305 x 360 /60° mm cutting capacity - round: 360 / 60° mm cutting capacity - square: 305 x 360 / 60° mm cutting capacity - flat: 700 x 360 / 90° mm cutting capacity - round: 360 / 90° mm cutting capacity - square: 360 x 360 / 90° mm speed: 20 - 100 m/min sawing motor: 3 kW hydraulic motor: 0,55 kW coolant pump: 0,12 kW voltage: 400 V / 50 Hz total power requirement: 3,7 kW weight of the machine ca.: 1460 kg dimensions of the machine ca.: 2850 x 1000 x 1850 mm Accessories: • Inverter • hydraulical vice • automatical ...

cutting diameter: 280 mm saw band length: 3400 x 27 mm cutting width: 0,9 mm capacity 45 degrees: flat: 240 x 180 mm capacity 45 degrees: round: 240 mm capacity 45 degrees: square: 210 mm driver:manufacturer: 350 x 200 capacity 90 degrees: square: 280 mm speeds: 20 - 100 m/min voltage: 400 V / 50 Hz sawing motor: 1,5 kW total power requirement: 2 kW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1,8 x 0,9 x 1,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 460 mm saw band length: 5200 x 41 x 1,3 mm cutting width: 460 mm cutting capacity - flat: 470 x 460 / 90° mm cutting capacity - round: 460 / 90° mm speed: 20 - 100 m/min voltage: 400 V / 50 Hz sawing motor: 4 kW total power requirement: 4,7 kW weight of the machine ca.: 1,665 t dimensions of the machine ca.: 2100 x 1300 x 850 m full-automatical band saw, Accessories: • Inverter for controllable speed, • automatical stop function after sawing and on breakage of the saw blade, • automatical saw arm lifting, • hydro-mechanical clamping of the saw blade, • material clamping to be effected from above, hydraulical vice, • switch for cutting pressure control, • coolant pump, • roller conveyor, length: 1.2 m. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 810 mm saw band length: 9500 x 54 x 1,6 mm cutting width: 1020 mm cutting capacity - flat: 1020 x 1020 mm cutting capacity - round: 1020 mm speed: 20 - 100 m/min sawing motor: 4 kW hydraulic motor: 2,2 kW total power requirement: 7,5 kW weight of the machine ca.: 5860 kg dimensions of the machine ca.: 4500 x 1700 x 2750 mm Accessories: • Inverter • hydraulical vice • automatical movement to the top via hydraulical cylinder. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 810 mm saw band length: 8200 x 41 x 1,3 mm cutting width: 810 mm cutting capacity - flat: 480 x 850 / 45° mm cutting capacity - round: 480 / 45° mm speed: 20 - 100 m/min sawing motor: 4 kW total power requirement: 6 kW weight of the machine ca.: 3100 kg dimensions of the machine ca.: 3000 x 1200 x 2350 mm Accessories: • Inverter • hydraulical vice • automatical movement to the top via hydraulical cylinder. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 800 mm saw band length: 8500 x 54 x 1,6 mm cutting width: 1000 mm cutting capacity - flat: 800 x 1000 mm cutting capacity - round: 800 mm cutting capacity - square: 800 x 800 mm speed: 15 - 100betrieb m/min operating pressure: 50 bar operating pressure: Spannbacken -40 bar operating pressure: Bündelspanner - 6-15 bar sawing motor: 11 kW hydraulic motor: 1,5 kW voltage: 400 V / 50 Hz total power requirement: 13,4 kW weight of the machine ca.: 3800 kg dimensions of the machine ca.: 4100 x 1300 x 2450 mm Accessories: • Inverter • hydraulical vice • automatical movement to the top via hydraulical cylinder. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Largura da ranhura: 3 - 90 mm dramento: velocidade de trabalho 430 mm: 4 - 12 m/min slot-milling: 400 mm return velocidade: 15 m/min despesto de potência: 5,5 kW pelho da máquina ca.: 1,4 t dimensionais da máquina ca.: 1,3 x 1,7 x 1,5 m • div. puxar broches e orientações

cutting diameter: 260 mm saw band length: 3660 mm cutting width: 0,9 mm cutting range - square -: 260 x 260 mm feed length: 500 mm feed length: multiple: 5.999 mm cutting speed: 17 - 106 m/min dimensions of saw-band: 3660 x 25 x 0,9 mm sawing motor: 1,5 kW total power requirement: 2 kW weight of the machine ca.: 1,05 t dimensions of machine L x W x H: 1,75 x 1,80 x 1,15 m Accessories: coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 500 mm cutting length min.: 285 mm cutting lenght max.: 6000 mm sawing motor: 2 x 3,0 kW work height max.: 860 mm saw blade turning speeds: 2800 U/min dimensions of saw-blade: ø 500 x 3,5 mm boring of saw blade: ø 30 mm number of teeth: 120 weight of the machine ca.: 1,7 t dimensions of machine L x W x H: 7,25 x 1,25 x 1,81 m - 1 horiz. and 1 vertical pneumatic clamping cylinder per saw unit - - infinitely variable saw blade feed, accelerated hydropneumatic return stroke - - motorized longitudinal adjustment of the saw units with positioning control RAPID, electronic E 190 - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

axis stroke (X,Y,Z): 1800 x 900 mm Number of spindle head vertical: 1 St. Number of spindles head horizontal: St. Number of tools: St. Dust suction hood: mm Number of milling agregates: 1 St. working dimensions: mm Year: Boring power: mm Speed of boring spindles: U/min. Speed: U/min. Required air-pressure: bar Diameter of the saw arbor: mm total power requirement: 2,8 kw Weight: kg Dimensions (L/W/H): 2400 x 1400 x 1900 mm Motor output: 2,2 kW Capacity: 100 m³/h kg/h Sawing unit: Sawblade tiltable: ° Saw blade diameter: mm Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 15-150 m/min capacity 90 degrees: round: 325 mm capacity 90 degrees: flat: 500 x 300 mm capacity 45 degrees: round: 300 mm capacity 45 degrees: flat: 300 x 300 mm : 200 mm : 200 x 200 mm dimensions of saw-band: 4200 x 34 x 1,1 mm : 60 mm : 165 mm min. dia.: 5 mm work height max.: 750 mm total power requirement: 3 kW dimensions: 1300 x 2050 x 1400 mm weight: 910 kg Standard equipment: - Fast miter adjustment from 90° to 30° stepless to 0.5° accuracy according to scale. The miter turning point is the point of intersection between saw band and Material system, thereby no change in the length dimension - At each angular position of the saw frame, the material is parallel in 90° tightened - Complete coolant device with electric submersible pump - Machine stand with chip collecting tray - Precise saw band carbide roller guide, saw blade brush - 1 saw blade on machine 4-6 ZpZ - MEBA high  ...

saw blade diameter: 350 mm cutting diameter: 110 mm capacity 90 degrees: flat: 180 x 85 mm capacity 45 degrees: round: 105 mm capacity 45 degrees: flat: 130 x 85 mm capacity 60 degrees: round: 105 mm capacity 60 degrees: flat: 90 x 85 mm turning speeds: 9-18-36-74 U/min vice: max. 180 mm Control: IMET CNC total power requirement: 1,5 / 2,2 kW weight: 710 kg range L-W-H: 2000 x 1100 x 2000 mm Current new price approx. 25.000 euros Special price on request Circular saws are used to cut thin-walled tubes and profiles. Clean, precise cut edges are achieved with the circular saw. Fast sawing and easy miter adjustment are the advantages of the circular saw. Basically, you should also pay attention to the correct cooling of the materials. Cooling lubrication is essential for metallic materials. Cooling lubrication is not required for non-metallic materials such as plastic, brass or cast iron. ...

roll diameter: 520 mm throat: 520 mm workpiece height: 310 mm cutting speed: 25 - 500 m/min table surface area: 600 x 500 mm band length: 3.880 x 3-16 mm mm Table tiltable up to: 15° Grad work height max.: 1000 mm total power requirement: 1,5 kW weight of the machine ca.: 500 kg. dimensions of the machine ca.: 1,3 x 0,76 x 2,14 m Furnishing: - Solid gray cast iron table - Safe working is guaranteed by the large contact surface - Standard with band welding device, annealing device - Scissors and sharpening stone - As standard with continuously adjustable cutting speed - Machine body made of robust steel construction for smooth running - Precision blade guide for optimal cutting results - Ideal for sawing complicated contours and shapes - Work table can be swiveled by 15 ° in all 4 directions - Blow-out device with compressor included in delivery - For radius sawing saw bands from 3 mm w ...

saw blade diameter: 350 mm dimensions of saw-blade: 350 x 3.4 x 32 mm turning speeds: 1700 / 3400 U/min capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 x 105 mm capacity 90 degrees: flat: 180 x 70 mm capacity 45 degrees: round: 110 mm capacity 45 degrees: square: 95 x 95 mm capacity 45 degrees: flat: 135 x 60 mm total power requirement: 1.5 / 2.2 kW weight of the machine ca.: 530 kg. range L-W-H: 2000 x 1500 x 1700 mm Machine from a workshop for the disabled good condition () Furnishing : - fully automatic aluminum circular sawing machine - with input of section length and number of pieces - swiveling control panel, right front - Miter adjustment 45° left/right - pneumatic material clamping (horizontal+vertical) - programmable feed carriage - Micro spray device (oiler) - Machine base, with forklift pockets - original instruction manual Machine link: https://mhp.lo ...

cutting diameter: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: flat: 170 x 170 mm height of material-table: 600 mm Pitch min/max: 50.000 mm vice: 335 mm Öffnung band speed: 15 - 100 m/min automatic feeds: 600 mm dimensions of saw-band: 3650 x 27 x 0,9 mm total power requirement: 2,2 kW weight: 1.105 kg range L-W-H: 3,3 x 2,83 x 2,23 m Electro-hydraulic fully automatic band saw, with additional: semi-automatic semi-automatic dynamic manual operation Description : - Automatic cycle (cuts from 0 ° to 60 ° left) - Semi-automatic, semi-automatic-dynamic and manual cycle - Cuts from 45 ° right to 60 ° left - Manual or semi-automatic dynamic cycle - to make cuts without programming - Numerically controlled band saw ...

pressure: 225 t chamfer lenght: 3050 mm distance between columns: 2550 mm column arm: 300 mm ajustment speed: 110 mm/sec work speed: 9.0 mm/sec return speed: 130 mm/sec work stroke: 240 mm dayligth: 320 - 560 mm table height: 1000 mm table width: 200 mm oil volume: 350 ltr. operating pressure: max. 296 bar air pressure: 4.5 - 6.0 bar voltage: 400 Volt total power requirement: 18.5 kW weight: 14900 kg range L-W-H: 5180 x 2400 x 3100 mm Furnishing: - electro-hydraulic CNC die bending/press brake - CYBELEC CNC control ModEva 12S, swiveling at the front right High-resolution graphic color screen 14 inches Representation as a line, area or volume drawing of the product Clear, concise menus in the operators language Large tools and products library - CNC-controlled back gauge adjustment (X-axis) Stop range X axis of bending line .. 5.0 - 1.000 mm Adjustment speed .. max. 250 mm/sec. - CN ...

cutting diameter: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: flat: 170 x 170 mm height of material-table: 600 mm Pitch min/max: 50.000 mm vice: 335 mm Öffnung band speed: 15 - 100 m/min automatic feeds: 600 mm dimensions of saw-band: 3.650 x 27 x 0,9 mm total power requirement: 2,2 kW weight: 1.105 kg range L-W-H: 3,3 x 2,83 x 2,23 m Electro-hydraulic fully automatic band saw, with additional: semi-automatic semi-automatic dynamic manual operation Description : - Automatic cycle (cuts from 0 ° to 60 ° left) - Semi-automatic, semi-automatic-dynamic and manual cycle - Cuts from 45 ° right to 60 ° left - Manual or semi-automatic dynamic cycle - to make cuts without programming - Numerically controlled band sa ...

Largura da ranhura: / mm draamento comprimento: / mm pulsão força - máx.: / t

capacity: Ø 30 - 160 mm Saw Body: 30 Grad Linear Schlitten sawing motor: 15 kW hydraulic motor: 3 kW Saw Feeding Servo: 1,5 KW Siemens Material Feeding Motor: 1,5 KW Siemens Saw speed: 30-120 rpm /min saw-blade dia.: Ø480 x 2,25 x 2,7 x 50 mm cutting range min.: 1600 mm cutting range max.: 7000 mm control: Siemens hydraulic: Rexroth Valve coolant: Pulverisiertes Schneidöl weight of the machine ca.: 5550 kg required space: 3200 x 7600 m Email us now at kontakt@atmh.de GERD WOLFF GLS-160 High-performance circular saw From 10 to 250 Millimeters round material, within seconds, they cut steal of all kinds with precision an ease. Equipped with a material feed system and components from Germany, we combine german with turkish mechanical engineering. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity: Ø 140 - 250 mm sawing motor: 30 kW hydraulic motor: 5,5 kW Saw Feeding Servo: 3 KW Siemens Material Feeding Motor: 3 KW Siemens Saw speed: 30-80 rpm /min saw-blade dia.: Ø750 x 3,8 x 3,2 x 80 mm cutting range min.: 1000 mm cutting range max.: 7000 mm control: Siemens hydraulic: Rexroth Valve coolant: Pulverisiertes Schneidöl required space: 3500 x 8000 mm Saw speed: 30-80 rpm / U pro min weight of the machine ca.: 9000 kg GERD WOLFF GLS-250 #High-performance circular Saw From 10 to 250 Millimeters round material, within seconds, they cut steal ofall kinds with precision an ease. Equipped with a material feed system and components from Germany, we combine german with turkish mechanical engineering. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity: Ø 15 - 100 mm sawing motor: 11 kW saw speed: 30-130 U / min hydraulic motor: 2,2 kW Saw Feeding Servo: 1,5 KW Siemens Material Feeding Motor: 1,5 KW Siemens saw-blade dia.: Ø360 x T2.6 x 2.25 x 40 mm cutting range min.: 3000 mm cutting range max.: 7000 mm control: Siemens hydraulic: Rexroth Valve coolant: Pulverisiertes Schneidöl required space: 2900 x 7400 m barrel diameter: mm barrel diameter: mm Saw speed: rpm /min weight of the machine ca.: 4900 kg GERD WOLFF GLS-160 High-performance circular saw From 10 to 250 Millimeters round material, within seconds, they cut steal of all kinds with precision an ease. Equipped with a material feed system and components from Germany, we combine german with turkish mechanical engineering. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity: Ø 30 - 160 mm Saw Body: 30 Grad Linear Schlitten sawing motor: 15 kW hydraulic motor: 3 kW Saw Feeding Servo: 1,5 KW Siemens Material Feeding Motor: 1,5 KW Siemens Saw speed: 30-120 rpm /min saw-blade dia.: Ø480 x 2,25 x 2,7 x 50 mm cutting range min.: 1600 mm cutting range max.: 7000 mm control: Siemens hydraulic: Rexroth Valve coolant: Pulverisiertes Schneidöl weight of the machine ca.: 5550 kg required space: m GERD WOLFF GLS-160 High-performance circular saw From 10 to 250 Millimeters round material, within seconds, they cut steal of all kinds with precision an ease. Equipped with a material feed system and components from Germany, we combine german with turkish mechanical engineering. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity: Ø 140 - 250 mm sawing motor: 30 kW hydraulic motor: 5,5 kW Saw Feeding Servo: 3 KW Siemens Material Feeding Motor: 3 KW Siemens Saw speed: 30-80 rpm /min saw-blade dia.: Ø750 x 3,8 x 3,2 x 80 mm cutting range min.: 1000 mm cutting range max.: 7000 mm control: Siemens hydraulic: Rexroth Valve coolant: Pulverisiertes Schneidöl required space: 3500 x 8000 mm Saw speed: 30-80 rpm / U pro min weight of the machine ca.: 9000 kg GERD WOLFF GLS-250 High-performance circular Saw From 10 to 250 Millimeters round material, within seconds, they cut steal ofall kinds with precision an ease. Equipped with a material feed system and components from Germany, we combine german with turkish mechanical engineering. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity: Ø 10 - 75 mm sawing motor: 11 kW hydraulic motor: 3 kW Saw Feeding Servo: 1,5 KW Siemens Material Feeding Motor: 1,5 KW Siemens Saw speed: 70-160 rpm /min saw-blade dia.: Ø285 x 2,0 x 1,7 x 32 mm cutting range min.: 1000 mm cutting range max.: 7000 mm control: Siemens hydraulic: Rexroth Valve coolant: Pulverisiertes Schneidöl required space: 2950x6800 m weight of the machine ca.: 3500 kg GERD WOLFF GLS-75 High-performance circular saw From 10 to 75 Millimeters round material, within seconds, they cut steal of all kinds with precision an ease. Equipped with a material feed system and components from Germany, we combine German with turkish mechanical engineering. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity: Ø 10 - 75 mm sawing motor: 11 kW hydraulic motor: 3 kW Saw Feeding Servo: 1,5 KW Siemens Material Feeding Motor: 1,5 KW Siemens Saw speed: 70-160 rpm /min saw-blade dia.: Ø285 x 2,0 x 1,7 x 32 mm cutting range min.: 1000 mm cutting range max.: 7000 mm control: Siemens hydraulic: Rexroth Valve coolant: Pulverisiertes Schneidöl required space: 2950x6800 m weight of the machine ca.: 3500 kg GERD WOLFF GLS-75 #High-performance circular saw From 10 to 75 Millimeters round material, within seconds, they cut steal of all kinds with precision an ease. Equipped with a material feed system and components from Germany, we combine German with turkish mechanical engineering. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t distance between columns: 2700 mm stroke: 280 mm ram adjustment: 120 mm daylight (stroke down, ram adjustment above): 550 mm table surface area: 2700 x 1200 mm ram surface: 2700 x 1200 mm no. of strokes: 20 - 40 Hub/min total power requirement: 22 kW weight of the machine ca.: 33 t dimensions of the machine ca.: B 3520 x T 2850 x H 4550 m Double-column eccentric press in a special design - size of the GTX 250 S, but only a pressing force of 160 t Furnishing: - hydraulic roller bars - hydraulic Tool clamping above + below - Motorized ram adjustment - infinitely variable speed control - hydraulic overload - Grease central lubrication - Hand oiler for ram weight compensation converted by MAWI GmbH Germany: - Swivel arm with Siemens Touch control panel - Light barrier from Sick - Safety control from Pilz + Siemens - frequency converter - Monitored protection area at the rear  ...

pressure: 63 t stroke: 650 mm throat: 380 mm table surface area: 650 x 1000 mm ram surface: 650 x 1000 mm dayligth: 850 mm die cushion stroke: 220 mm die cushion area: 500 x 520 mm die cushion capacity: 25 t ram stroke speed - under load: Vorlauf 400 mm/sec ram stroke speed: Rücklauf 330 mm/sec drawing speed: Auf 220 mm/sec drawing speed: Ab 300 mm/sec working height (floor - top of table): 1050 mm total power requirement: 18,5 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 1,2 x 2,2 x 3,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 560 mm saw band length: 7.260x54x1,6 mm Control: mit 99 Programmen work height max.: 650 mm Chip coveyor: inkl. power capacity - table: 10 HP sawing motor: 650 kW weight of the machine ca.: 4.800 kg dimensions of the machine ca.: 3.400x2.050x2.380 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece weight: 100 - 3.000 kg workpiece length: 5.000 mm diameter: 1.260 - 1.600 mm Control: CAP920 total power requirement: 11 kW weight of the machine ca.: 20 t dimensions of the machine ca.: 20 Container m Mobile balancing system SCHENCK for use anywhere in the world The balancing system is permanently installed in a 20 open-top container. The container is equipped with everything you need for balancing • Lighting • Metal base plate 12,000 kg as a base plate for accuracy • Compressor for working air supply distributed in the container • Compressed air connections. • A circumferential power strip • A tool cabinet equipped with tools • A hydraulic lifting device for aligning the container from the outside • In addition to a tarpaulin for the roof, the container also comes with movable roof segments made of sheet metal. • The container has a central plug through whic ...