usava CHIRON para venda

This CHIRON MILL 2000 Vertical Machining Center was manufactured in the year 2003. It is equipped with a Siemens Sinumerik control unit. The machine has a spindle speed of 12000 rpm.

This CHIRON DZ24 WM HS Vertical Machining center was manufactured in the year 2015 in Germany. It is equipped with a Fanuc Series 31 i – MODEL B5 control unit and has 4 axis. The machine has a spindle speed of 15000 rpm.

This CHIRON MILL FA 800 vertical machining center was built in the year 2006 in Germany. it is equipped with a Siemens Sinumerik 840D control unit and has 5 axis. The machine has a spindle speed of 12000 rpm.

This CHIRON MILL 800 Vertical Machining center was manufactured in the year 2015 in Germany. It is equipped with a SIEMENS SINUMERIK control unit and has 5 axis.

This CHIRON FZ15W Vertical Machining center was manufactured in the year 2001. It is equipped with a Siemens SINUMERIK 840D control unit and has 3 axis. There are 2 units available.

This CHIRON FZ15W Vertical Machining center was manufactured in the year 2002 in Germany. It is equipped with a Siemens SINUMERIK 840D control unit and has 4 axis.

This CHIRON MILL 2000 Vertical Machining centre was manufactured in the year 2005 in Germany. Contact us anytime for further questions.

This 5-axis Chiron Mill 800 was manufactured in 2005. It features a spindle revised in September 2022, capable of 20000 rpm and a robust Heidenhain iTNC-530 control. The machine handles up to 380kg on its table with a tool capacity of 40. It has comprehensive cooling options and a full panelling setup. A significant opportunity to buy this Chiron Mill 800 vertical machining centre. Contact us for more information.

x-travel:550 mm y-travel:300 mm z-travel:425 mm CNC-control:Sinumerik table-size:950 x 350 mm max. table load:500 kg spindle taper ISO:30 spindle turning speed range:20 - 10500 U/min spindle drive motor:5,5 kW tool change unit:12 Pos. coolant:inkl. voltage:380 V tool adaptor:Steilkegel 40 groove width:32/28 mm no. of flutes:3 rapid speed:40.000 mm/min total power requirement:15 kVA weight of the machine ca.:3,3 t chip conveyor:inkl. dimensions of the machine ca.:2000x 3000 x2500 mm Documents:vorhanden - Serial Number: 186 - 78 - Control: FANUC O-M - with various tool holders - coolant equipment

x-travel:550 mm y-travel:400 mm z-travel:360 mm control:Siemens Shopmill 840 D Tilting Axis A Angle:± 100 ° table surface area:Ø 280 mm Spindle RPM:20-12000 1/min spindle drive:9,5 / 14 kW Spindle Torque:90 Nm rapid travel x/y/z:60 mm/min tool magazin::48 HSK-A63 tool diameter:82 (125) mm weight of tools max.:5 kg Tool change time tool/tool, milling spindle:2,4 s total power requirement:15 kW weight of the machine ca.:8,2 t Dimensions (L/W/H):3,8 x 4,1 x 3,3 mm internal coolant system feed:10/20/30/40/50/60/70 bar Motoman robot:NX 100 This is a well maintained vertical 5-axis machining center with coolant through spindle 10-70 bar. Motoman Robot for parts loading

Description: travels: X-axis: 2000 mm Y-axis: 450 mm Z-axis: 630 mm control: SIEMENS Sinumerik 840D max. spindle speed: 12000 rpm. spindle power: 11 kW tool holder: SK40 number of tool places: 12  , transport dimensions: machine: 5800 x 2800 x 3000 transporter: 7200 x 1000 x 2200 mm aggregate: 2500 x 1600 x 2100 mm smaller unit: 1200 x 800 x 1800 mm protective foils: 2400 x 1400 x 1200 mm z-motion: 630 mm, x-motion: 2,000 mm, y-motion: 450 mm, control: SIEMENS Sinumerik 840D, taper: SK40, power capacity - spindle: 11 kW, toolchanger positions: 12, turning speed range: 12,000 rpm, weight approx.: 12,200 kg, Approx. Onsite Dimension. (l x w x h): 5,800 x 2,800 x 3,000 mm

Description: Note! without machine vise and tooling z-motion: 425 mm, x-motion: 550 mm, y-motion: 300 mm, control: Siemens Sinumerik, table surface area l x w : 660 x 350 (2x) mm, numbers of pallets: 2, taper: SK40, toolchanger positions: 20, power capacity - spindle: 11 kW, turning speed range: 10,000 rpm, rapid motion: 40 m/min, weight approx.: 4,000 kg, Approx. Onsite Dimension. (l x w x h): 3,550 x 2,240 x 2,450 mm

This 4-Axis CHIRON FZ 15 S vertical machining centre was manufactured in 2002. It is equipped with a Siemens Sinumerik 810D control system and features X, Y, and Z-axis movements of 550 mm, 400 mm, and 426 mm respectively. The machine includes a 20-position tool changer and an fourth axis for enhanced machining flexibility. Additional features such as a cooling system and full documentation, including parameters backup for NCK and PLC, make this machine a reliable choice for precision milling operations. The CHIRON FZ 15 S machine we have for sale is an excellent addition to any machining facility. Contact us for more information.

MODELO CHIRON FZ18W MAGNUM 4 eixo Centro de maquinação vertical com rotopallet e eixo duplo 20 eixo 20 FERRAMENTAS ISO 40 Toolchange: 2,1 sec Spindle: 20 - 8000 RPM, 18,5 kW X = 625 Y = 400 Z = 400 Rapids 40m/min Área de tabela: 2 x 900 x 470 - TSUDAKOMA pesado serviço duplo 4º eixo (Japão) 360.000 pos. - unidade hidráulica original do HAWE - FANUC 0M 1995 Pode ser inspecionada sob alimentação no nosso armazém Máquinas-Máquinas Mimu (Itália), X: 625, Y: 400, Z: 600, 4º eixo: Sim, (2x) Tsudakoma 360 000 pos.

Chiron FZ15KS HIGH SPEED Vertical Machining Center Dados técnicos: Viagens x: 550mm y: 400mm z: 360mm 4º eixo original sentido finder CNC Siemens 840D Mesa área de trabalho 105 x 450mm Suporte de ferramentas SK 40 Speed range até 12000 1/min Com monitorização de rutura de ferramenta renishaw de 4º eixo A máquina está no nosso armazém, sob a potência Mimu Machine Tools (Itália), X: 550mm, Y: 400mm, Z: 360mm, 4º eixo: 360.000 pos, Renishaw: Sim

MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindl ...

Chiron FZ18W Magnum rotopallet 1999 CNC Siemens 840D X 630 Y 400 Z 425 tables (2) 850x450mm 20 tools ISO 40 / 18kW / 140 Nm 40m/min HAWE hydraulics automatic doors swarf conveyor 6 ton 3,6 x 2,25 x 2,85 machine can be inspected under power in our warehouse Mimu Machine Tools (Italy)

Chiron FZ15KS HIGH SPEED, 4 axis vertical machining center, X: 550mm, Y: 400mm, Z: 360mm, 4th axis original Peiseler 360.000 pos, CNC Siemens 840D, Table 1050 x 450mm, Toolchanger 48 pockets, ISO 40, Spindle 12000 1/min, Renishaw tool control, Coolant through spindle, Hydraulic clamping, Swarf conveyor, Under power in our warehouse in Gussago BS, Mimu machine tools, Spindle: 12000 RPM, 4th axis: 360 000 pos

5 axis machininng center (milling/turning from bar), Under power in our warehouse, MAKE CHIRON, MODEL MILL 800 5 axis, CNC Fanuc 18iMBS (5 simoultaneous axis 1), X, Y, Z (mm) 800 – 500 - 550, Rapids (Highspeed) 60 m/min, Swivelling head CNC controlled (B axis) +/- 100°, Turning spindle Peiseler, Milling spindle 12.000 giri / 140 Nm (v nota 2), Tools 65, Tool type HSK-A 63 DIN 69893, Tool-change time 1,5 sec (v nota 3), Table 1400x500, Max table load 1200 kgs, Coolant through spindle 70 bar (see note 4), CNC controlled clamping/rotating unit for 6th face machining (v. nota 5), Pressurised linear encoders, Swarf conveyor, Renishaw-ready, Y.O.M. 2006, Weight 7500 kgs, Turning package, Max dia 65mm, RPM: 15 / 4500, Max 42,5 KW / 90 Nm., Hydraulic clamping 800 Nm., Bar loader ILS-RBK- 10012 65, Diameters min/max 5/65 mm L= 600-1200 mm, Highspeed (2), 60m/min., Spindle 20-12.000 min.â ...

MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindl ...

Vertical machining center CHIRON FZ08W 2 pallets 12 HSK32 tools Spindle 15000 rpm HSK-32 rotopallet (2 pallets) CNC Fanuc 21iM chip conveyor The machine is under power in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with numerical control capable of performing several mechanical operations with a single set-up on multiple surfaces of the same piece of work. It is generally equipped with several motion axes and one automatic tool exchange system and sometimes multiple pallets, CNC type: Fanuc 21iM, Number of pallets: 2, Spindle revolutions: 15000

Chiron FZ15KS Centro de usinagem vertical de 4 eixos X: 550mm Y: 400 mm Z: 360 mm Original Peiseler 4º eixo Siemens 840D CNC Superfície da mesa 1050 x 450 mm Mudança de ferramenta 48 pós ISO 40 Velocidade do eixo até 12000 rpm com o detetor de ferramentas quebradas Renishaw de 4º eixo Líquido de arrefecimento através do transportador de cavacos do eixo

Sinumerik 810M GA3 Basket tool changer: 20 x SK30 Tool change under 2 seconds. Spindle Max: 10500 rpm Table size: 2x (660mm x 350mm) Axes travel: X= 550mm Y= 300mm Z= 425mm B= 360 degrees (4th-axis) Under rotary table on the left: Yes. Coolant unit with Knoll swarf conveyor. Weight: 4000Kg CRT screen was upgreaded to TFT. Equiped with 1x 4th axis

X axis movement : 630 mm Y axis movement : 400 mm Z axis movement : 630 mm Double table Table size : 620 mm x 940 mm Machine has been used on aluminium

Chiron FZ08KW MAG Vertical Machining Center With 4th Axis Siemens 840D Control Unit 15 000 rpm Double table Double dividing head(Peiseler) Renishaw probe All maintenance has been done Chiron Turkey

It’s had very little use over the last few years. Has to be the most productive machine in its class. YOM: 2001 Control: Fanuc 21iM Spindle: 15000 RPM Swarf Conveyor Includes all spindle tooling and custom Microloc work holding bases & clamps (as seen in the photos). We have all the manuals, operation, programming, maintenance, spares and electrical.

Chiron DZ 18 W Magnum Vertical Machining Center Double table Double spindle Machine is in good working condition

X : 630 mm Y : 400 mm Z : 425 mm Siemens control unit

X axis : 550 mm Y axis : 400 mm Z axis : 420 mm Double table Double Spindle Table size : 460/580 Spindle taper : HSK63 Fanuc Control Machine is in good condition